HP g60-630us: power button to computer hp laptop

Similar Questions

• HP f023 wm Notebook: led power supply for computer Hp laptop will not go out and won't restart

  I only had my laptop for less than a month. When I stop the power light did not go as usual and it does not restart. What can I do? Thank you.

  Hi @jean309,.

  Thank you for visiting the Forums HP's Support and welcome. I read on your computer laptop 15-f023wm HP and screen flashing after his stop. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system. If you need an update on the system, you might have a problem as you describe.

  If you ever need to call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link for the number of support in your region. They will be happy to help you immediately.

  Thank you.

• Blue screen when you unplug the power of the computer dell laptop XP

  I have a dell latitude E6500... problems with blue screen when I unplug the laptop.  his past about 5 out of 10 times now.  Ive updated all recommended microsoft updates and it is still the case?  is there a driver for xp needed to solve this problem?  It only happens when I unplug the power cord and it happens as soon as I unplug

  Hello suncoastsrq,

  Usually, when we see problems during shutdown, the cause is something that loads at startup.

  To this end, I would recommend mode startup minimum troubleshooting as seen in the following articles:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  In addition, if we can get downloaded discharge, the community has access to them and will probably be able to determine the cause.

  You can download the dump Auggy's previous suggestion?

  Let us know.

  Best regards

  Matthew_Ha

• the light on the power button does not work. How can I activate it?

  HP pavilion dv7

  Windows 7.

  the light on the power button does not work. How can I activate it?

  If the key light is not lighting up, then more than likely that the LED is just out for your power button. If the laptop is still under warranty, you can it be repaired or replaced, but as long as its not causing you any serious issues, I worry too much with it.
  
  BRAVO is just a system we use to say thank you to informative messages.

• Press the Power button twice at startup?

  On my new E530 I just realized I have to press the power button twice for the laptop start. At first, I thought that I tap it enough hard or the calendar has been disabled or something, but after many tests I came to the conclusion that it is in fact mandatory that I press the power button TWICE in the order the laptop to start.

  My question is, is this normal / design?

  Google gave was contradictory and inconclusive answers:

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/ThinkPad-edge-E420s-start-up-button-issue/t...

  http://forums.Lenovo.com/T5/ThinkPad-edge/power-button/TD-p/307704

  A credible person can sound here?

  Much appreciated and thanks in advance!

  Hey, Gleipnir,.

  When I pressed the button of power quickly as that, in my view, your description it would take two thrusts to get to power be as the first was not strong enough to register. I believe that this does not work as expected and you should not be concerned.

  Best regards

  Hiro

• The power button will not turn on my computer. Is there a way to solve this problem, or the computer not sleep once I do back on?

  I have a MacBook Pro 2011.

  The power button does not turn the computer on when the computer goes to black screen.

  The battery he is

  iI tried to Community assistance to research and tried to wait. The next morning, I was able to turn it back on. Now, it happened again.

  Please help me. I can afford a new Mac.

  Thank you

  Get it fixed. Make an appointment at the Genius Bar in Apple for the service. If you need a Apple Store - find a store - Apple.

• I can't see Start button and have to turn off my computer using the power button / stop

  When I use Mozilla, I can see no longer the button 'Start' at the bottom left of the computer. The only way that I can disable the computer is holding the "Power" button What I did to cause this.

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
  Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

• Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button

  Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button. It this causes only after I opened Firefox, my computer works well before the opening of Firefox. I h

  It looks a little like yo maybe has a hardware problem on your computer. have you tried to repair permissions on your hard drive? create a new Firefox profile? Use the Profile Manager to create and delete profiles Firefox

• power led on the rear of the computer the power button / stop turns on, then turns off.

  I have a HP TouchSmart 610-1015xt.  The light on the transformer power is on, but not exactly brilliant (I think it's good, but not sure).  The light next to the power input is on.  When I plug in the power, the power led lights up for a couple / few seconds then turns off and does not turn.  At no time the computer capable of running and it does no whether noise (no fans, no beeps, no attempt to start.

  Any suggestions?

  Figured it out.  Apparently I have reset the battery internal and then unplugged the power button circuit and then he started upward.  The only problem is that now it will restart automatically every time it is closed or even sleep.  I'll start another forum on this issue.

  Thank you for your help.

• 3 peripheral USB connected to the Macbook 4.1 computer tells me to restart using the power button / stop?

  I went to record a live concert, and I need to use a single interface to record the members of the group with microphones near directly to a computer and another interface running for my model of Macbook 4.1 end of 2007, to get signals from the map of the House.

  When I plug my converter USB 3.0 AD / DA in my Macbook 4,1 - the computer sends immediately a window indicating to me to "reboot" the computer using the power button / stop. Ideas or comments about why this happens?

  I read on this forum that USB ports should work with retroactive effect, or accept USB 3.0 devices, but just use a speed 2.0?

  Thank you.

  It could be that it is a requirement of your converter AD / DA she needs to be present at a properly accessible to the OS X when startup sequence it is plugged into a USB2 port.

  Its also interesting to note that, well that peripheral USB3 can be plugged into the USB2 ports... it could be that your device may not work properly unless it is used with a port USB3... for reasons of bandwidth or even certain types of power supply.

  But to be sure...

  Which converter AD / DA are you using?

• When my computer goes into sleep mode, I have to press the power button to turn it back on.

  original title: sleep/hibernation

  When my computer goes into sleep mode, I have to press the power button to turn it back on.  I used only having to press a key on the keyboard.

  Can someone tell me how to solve this problem, as if it was before?

  Well, on the theory that your computer is awkward, try to change the settings to another thing and OK your way out the control panel.  Then go back and put them in the way they were and OK your way out.  Occasionally, it will reset the internal parameters and things can return to normal.

  HTH,
  JW

• My computer is stuck on the Welcome screen and the power button does not work. How can I activate it finish (and on)?

  My computer is a Windows XP laptop. It actually worked fine this morning, but now my power button does not work and the computer does not start correctly.

  Hello

  Its best to contact the manufacturer of the computer as it might be a hardware problem.

• I have a computer that is running Windows xp and when I push the power button, it automatically restarts

  When I push the power button, it starts up but when I see the Windows xp startup screen complete the restart of the computer around and does exactly the same thing again and again, so I can't use it, please help I need my computer =)

  towelsrawesome,
  Thanks for posting on the Microsoft answers Forum.  The first thing I would say is to remove all external devices from your PC (except the mouse and keyboard) and then restart.  If she does not always correctly, then try to start safe mode.  Here is a link that explains the Safe Mode and how to start to it: http://support.microsoft.com/kb/315222

  Post back with the results of these measures.  Also, let us know if something has changed recently on your system (hardware or software) and give us some details about your system.  Let us know the make\model of pc and which package XP version\service you use. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help - HP Pavilion a6030.uk desktop computer. Have to press the power button several times to start?

  Hello

  I have a HP desktop computer. The model is HP Pavilion a6030.uk, Opertating system: windows vista.

  My computer has had no problems at all until yesterday for some reason, I had to push the switch several times to start until he finally turned and did normal starts. As I would press the power as normal to start button, but all of a sudden, it turns off after about 2 seconds and so I would tap on the switch several times and each time it will not start and turn off, then the power button could be pressed again until it would finally turn on and start and run as normal and seems to work correctly. And it was the same thing today, I pressed the power button mutiple times (for example 6 times) until she finally started as usual.

  Savvy/computer im not very well informed or wise in this area, please someone will help me and give me some advice/help to fix/resolve this problem.

  Thank you for taking the time to read this and any help would be appreciated for this problem.

  Thank you.

  Vonbon90, welcome to the forum.

  When I see these symptoms on an old computer, I think it may be a power supply (PSU) failure/ing.  Here's a guide that will help your troubleshooting it.

  In addition, you could test the memory.  This can be done by removing all modules of memory and replacing them one at the time and start.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.