HP HDX16t-1200

Similar Questions

• HP HDX16t-1200: x 9100 rather T6600 on HPHDX16T-1200

  Hello! I have such a situation!

  IBought hp hdx16t-1200 with t6600 installed processor, 4 GB of ddr2 ram. I read a lot of articles, forums, used CPU - Z, Everest soft information and I saw an x 9100 can be installed. I upgraded to 8 GB ddr2 and installed the processor but when turning on, it's not loading the bios window! It does not start and I don't know what to do. I don't want to show once again and install my old T6600. Before installing x 9100 I updated the bios to version f.35 cause, someone wrote that this will help in torun x 9100. With f35 bios my laptop was working fine.

  What should I do to use my lpatop! Will be grateful for your help!

  Hi @arhenix,

  Welcome to the HP Forums!

  I read on your laptop HP HDX X16T-1200 and questions with a BIOS. Try this to restore the previous BIOS.

  Let me know what happens.

  To show that you like, or are grateful for my post, kindly click the thumbs upwards below.

  Thank you.

• HP HDX16t-1200 XP drivers

  I don't want to install Windows XP, but I have no drivers XP fo.

  Please help me.

  Message edited by Ben5770 on 08/10/2009 13:40

  Hello

  First make Vista beckup. Information how to do it here.

  You have a folder with the drivers & programs that can prove very useful after downgrade XP. Copy the folder in C:\Swsetup on DVD Before you format your hard drive.

  Now You need to integrate your drivers Sata (only ICH9M-E/M SATA AHCI Controller) with nLite.

  Here is the guide how to do it and here are the drivers Sata for you. Just unRAR it drivers with winrar.

  Also, remember that you use at least version of WinXP SP2 . If you have not got the version SP2 here you can download this service pack and here you have a guide to how to integrate this with XP file written by nLite.

  In nLite, you can even burn your new XP CD with these changes.

• HDX 16 t-1200 CTO Premium: change of DigitalPersona to single pass

  I have a laptop PC HDX16T - 1200 CTO Premium, product number: nk135av under Windows 7 Ultimate which came loaded with digitalPersona.  I am running the latest version (4.11.3826).  With all the improvements of Windows and IE, sometimes it works good and sometimes not.  I am interested in passing some version of HP past Simple works well on it and save my passwords.  Someone has a link to the correct software and instructions on how to install it?

  Hi again Neal51,

  Thanks for the quick response!

  If you weren't able to find new updates for Digital Persona on your laptop using the HP Support Assistant's, then there is none available to install.

  I hope this helps!

  Best regards

• Local error-1200 creation push certificates on the server. Any idea?

  In the Application Server

  When you try to renew or create a certificate to push comes up with the error "Certificates to push creation local error - 1200" on the server. Any idea? »

  I'm having the same problem with 10.7.5 server. (two of them)

  At the time of renewal, I was looking at the Console and I think the Apple Server SSL certificate is therefore more reliable.

  (or server versions are low)

  August 15 at 10:23:08 login.* * servermgrd [23349]: received the connection error: error domain = NSURLErrorDomain Code =-1200 "error SSL and a connection to the server cannot be made. UserInfo = 0x7fb8f5aab9a0 {NSUnderlyingError = 0x7fb8f15af450 "error SSL and a connection to the server cannot be made.", NSErrorFailingURLStringKey =https://identity.apple.com/pushcert/caservice/renew, NSErrorFailingURLKey =https://identity.apple.com/pushcert/caservice/renew, NSLocalizedRecoverySuggestion = you want to connect to the server anyway?, NSLocalizedDescription = SSL an error has occurred and a connection to the server cannot be made.}

  August 15 at 10:23:08 login.* * servermgrd [23349]: certificate request to push failed: reason = Local, error code = - 1200, error = error Domain = NSURLErrorDomain Code =-1200 "error SSL and a connection to the server cannot be made. UserInfo = 0x7fb8f5aab9a0 {NSUnderlyingError = 0x7fb8f15af450 "error SSL and a connection to the server cannot be made.", NSErrorFailingURLStringKey =https://identity.apple.com/pushcert/caservice/renew, NSErrorFailingURLKey =https://identity.apple.com/pushcert/caservice/renew, NSLocalizedRecoverySuggestion = you want to connect to the server anyway?, NSLocalizedDescription = SSL an error has occurred and a connection to the server cannot be made.}

  So not yet an idea, but hopefully with these console outputs happen to something?

• Windows 7 64 bit driver for HP LaserJet 1200

  Available on the web sites of HP drivers do not work on our 64-bit Windows 7 computers.

  Is anyone know about a feasible driver?

  Choose which product you use and follow the appropriate steps for the Laserjet 1200 Series drivers.

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en & CC = US & prodTypeId = 18972 & prodSeriesId = 29789 & TaskID = 135

• Drivers of WIDCOMM 5.0.1.1200 Qosmio G20-127

  Is it possible to install software drivers Widcomm Bluetooth on Qosmio G20-127? I want to use them instead of Toshiba and Microsoft Bluetooth stacks. I modified the btwusb.inf file in Widcomm 5.0.1.1200 with my own PID and VID (taken from the Toshiba inf file) but I'm unable to install the drivers again.

  Hi Alex

  You will be very happy if someone can give you a correct and precise response to this topic. As you know Toshiba doesn't support and test some third part software.

• HP PSC 1200 do not print under Windows 7 Ultimate

  I've upgraded to Windows 7 ultimate for XP have not updated from office. My hp psc 1200 works well when it's windows xp, but not when I update my windows. I finished installing the driver, but when I tried to print some of my documents. It can not print. What should I do?

  Hi zoleen,

  Welcome to the HP Forums! I see that you can not print with your HP PSC 1200 with Windows 7 Ultimate edition. I'm happy to help you! Please have a look through this guide to printing. Print jobs are stuck in the print queue.

  Hope this information helps you and have a great day!

• R200 - Question about screen external resolution 1920 * 1200

  My boss bought this screen and is a little disappointed because he cannot reach the maximum resolution of the screen tft 23 "1920 * 1200. The R200 proposes that the resolution, which have an aspect ratio of 4:3, so the maximum for the screen is 1600 * 1200. Is there a driver 'special' for the graphics chip allowing non 4:3 resolution?

  Thank you

  Hello

  AFAIK on external display the maximum resolution is restriction of the graphics card and unfortunately there is nothing to do. The only thing you can do is check all the settings in the menu TFT. I'm pretty sure that you will find an option for switching of photo format.

  Good bye

• Satellite L555-10R: Question about using an external monitor with 1920 x 1200

  Hello

  I have this toshiba laptop: L555-10R

  I want to buy a screen external 24 "to use for CAD

  Please can you tell me, my graphics card composed with run at 1920 x 1200 monitor, and a second screen 1600 x 900 at the same time see my cell phone?

  I really want the 1200 vertical height of the external display for CAD work such as size of the screen vertically made a big difference.

  If not, is there anything I can do about it to update the graphics card from the laptop?

  If not, can you suggest a new laptop that would support this? I am looking for excellent performance for rendering using 3DS Max, autocad, sketchup, etc.

  Thanks in advance
  Christopher

  > Please can you tell me, my graphics card composed with run at 1920 x 1200 monitor, and a second screen 1600 x 900 at the same time see my cell phone?

  I think that this should not be a big problem
  The graphics chip is expected to provide support for 1920 x 1200.
  The question is whether the graphics card driver contains such special resolution of 1920 x 1200

  However, you can certainly choose two different resolutions for the screen internal and external monitor.

• Satellite Pro M30 external resolution of 1920 x 1200 monitor

  I got a widescreen monitor that supports the screen resolution 1920 x 1200. FC GeForce Go5200 supports 1920 x 1440, but does not support 1920 x 1200 (the manual of the current user on the site shows also 1920 x 1440 and even higher, but not 1920 x 1200).
  Because the card can handle higher resolution I think that an update of the BIOS on the card could add to this resolution (widescreen is possible in 1280 x 800 for the standard screen of the laptop). But the Web of Toshiba site does not show a BIOS update and don't not have new drivers for the NVidia card (45.56 installed on my laptop and also the highest available on the site).

  Anyone know a solution?

  Hello

  Of course the graphics card can not handle with this resolution of the screen. Try it please what Tom suggested. A you a few CD driver with this monitor?

• Tecra S5: No. 1920 x 1200 and 1680 x 1050 support on external monitors?

  Hello

  I have a Tecra S5 with nVidia Quadro NVS 130 M (512 MB)
  Officially, according to Toshiba, the external monitor plug is:
  + Max resolution: 2 048 x 1 536 +.
  + maximum refresh rate: 100 Hz +.
  + resolution not interlaced with a maximum refresh rate: 1920 x 1 200 +.

  I try to work with 2 different external monitors without success.

  First of all, I had a Samsung 245 b, 24 "(1920 x 1200). I have install the driver of Samsung, but the resolution was not supported. I also tried the forceWare laptop2go.com, but again no luck.
  So, I change my monitor and bought a Samsung 2243NW 22 ", 1680 x 1050. This resolution is the same with the native resolution of Tecra. I thought that this resolution could be supported. But still no luck. I could change the 1400 x 1050 or 1600 x 1200 resolution, but not the 1680 x 1050.

  There we really pity that Toshiba support 1920 x 1200 and 1680 x 1050 resolutions. Most of our days the monitors use these.

  Any help will be greatly appreciated.

  Thank you for your time

  Hello

  You first need to check if your graphics card would support such a resolution on external monitor.
  The user must provide all the details.
  If the card doesn t supports you the preferred resolution and then there is nothing to see.

  If the GPU can handle such external resolution then you should check if the graphics driver would also support such a resolution. The fact is that even if the graphics card, would support the external resolution, that you will not be able to choose if the graphics driver supports doesn t.

  As you can see that several factors are important

  Welcome them

• HP Pavillion TX2025el: Nvidia Geforce 6175 - resolution 1200 x 900

  Good evening (in Italy's 23:32) to HP support staff, I need your help.

  After you have installed Windows 10 64-bit on my HP Pavillion TX2025el, the maximum screen resolution is 1024 x 768 instead of the previous a 1200 x 900.

  The drivers installed by default are Microsoft std, but with this, I can't reach the maximum resolution.

  Please can you tell more or help me find the right? Even try to install NVIDIA Installer including the system and installed the best scanner driver (as as made on my previous WINDOWS 7 Professional 64 bit), the system "tells me" that it is impossible to install.

  So please help me to solve this problem. I hate my screen 1024 x 768.

  For I have not found a solution IMUST BACK to MY AMAZING Windows 7 Professional

  Thank you a lottery for your help and the co-op.

  Stefano Reali of Italy

  Hello:

  See if it works for you...

  Download the graphics driver Vista support page for your laptop.

  This package contains the driver for the chip video NVIDIA GeForce series in the notebook models and operating systems.

  File name: sp42635.exe

  Run the above driver.  You will probably get an error of unsupported operating system.

  Conclusion of any windows error.

  Go to Device Manager and click on the video controller (or Microsoft based Display Adapter) who need drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp42635.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

• Qosmio G30-205: Win XP MCE Explorer.exe crashes when you use 1920 x 1200

  Hello together from the Germany,
  When I use the highest resolution of 1920 x 1200 and fullsize windows when the access to certain folders, explorer.exe is closing for a short period a determine even the application. by using a lower screen resolution, everything is ok.
  no virus, no worm, no dialer

  What can I do?

  thx a lot for the helpful answers

  Barbara

  [Edited by: admin on August 2, 2007 06:59]

  There was a report of situation of dr.watson (memory dump) which was deleted because it was too long for the display.

  Hello

  could be interesting what model of machine / you have and what operating system/software/etc... is installed on your system.
  Please be more precisely with your description or that no one can help you with your problem.

  Would be grateful of some detailed comments. ;)
  Welcome them

• HDX 16 t 1200: upgrade Windows 10: Base system device

  Hello

  First of all, let me say that the upgrade of Windows 10 (I did a clean install) seems to work fine on my HDX 16.

  I have a few device drivers, I and Microsoft cannot understand. When I make upward device under other devices Manager, I have:

  >? Another device

  - ?! System device base (calling it a 1)

  - ?! (2) base system device

  - ?! Device base system (3)

  - ?! Unknown device (4)

  Properties:

  1 device Type: other devices; Manufacturer: Unknown; Location: Bus PCI 6, device 0, function 1. Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Events-info: device PCI\VEN_197B & DEV_2382 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 01E4 requires installation.

  2. Device Type: other devices; Manufacturer: Unknown; Location: Bus PCI 6, device 0, function 4. Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Events-info: device PCI\VEN_197B & DEV_2384 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 04E4 requires installation. (the only difference is location and event-Info)

  3 bus PCI 6, device 0, function 3

  Events-info: device PCI\VEN_197B & DEV_2383 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 03E4 requires installation.

  4 device Type: other devices; Manufacturer: Unknown; Location: On system compatible ACPI Microsoft; Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Details-value: ACPI\HPQ0004\2 & DABA3FF & 1

  Events-info: device ACPI\HPQ0004\2 & daba3ff & 1 requires installation.

  I found similar problems of pilot in the forum on other HP laptops, but nothing on my HDX 16 t 1200.

  Thanks in advance for any help.

  Hello:

  You need these drivers...

  Base system devices:

  This package contains the driver for laptop models JMicron card reader supported and operating systems.

  File name: sp42446.exe

  Unknown device:

  This package provides the HP 3D DriveGuard for laptops software
  models that run an operating system supported. HP 3D DriveGuard protects the hard drive of "parking the heads ' if the cell phone is accidentally deleted or is suddenly hit by another object.

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe