HP Jet P1102w Laser: cannot install HP Laserjet P1102w correctly (USB detects no not my printer)

Similar Questions

• Cannot install windows XP it said hard drives are not connected & windows can not find the hard drives

  I got an asus computer notebook windows vista, upgrade from vista to windows 7, now I'm not able to do a clean install of windows xp, when I try to install XP, it says that hard drives are not connected & windows cannot find not the hard drives, so once again installed windows 7, is there a way to overcome this problem Why do I get the message windows xp does not detect hard drives? I even formatted the hard drive & tried to install Xp, but still, I get the same message.

  The answers will be appreciated...

  Thank you

  Because the Windows XP installation CD does not have the necessary disk controller drivers.  You will need a floppy drive to provide the drivers of controller for the installation program, or you will need to burn a CD of Windows XP with the controller drivers slipstreamed into the installation.  A CD of Windows XP with SP2 included may have the necessary drivers.

  John

• Cannot connect HP laserjet 2820 scanner for computer laptop windows 7 - printer working.

  I have installed HP laserjet 2820 all-in-one on the new laptop with Windows 7 (per network) - I was able to connect to the printer, but not the scanner.  And I can '; get the HP Solution Center.  Any help will be appreciated.

  Thank you for your response.  I tried the solution of Vista, but it did not work.  Guess I'll have to buy a very long usb cable.  Good day

• Printer Dell AIO 944 installed with my laptop Compaq (Windows Vista) will not be printed.

  I had an old Compaq Office of four years who developed problems that would cost me more trouble that it's worth.  I had been printing it to a Dell 944, which I then installed in a new laptop Compaq with Windows Vista.  The installation seems to have been systematic and successful, but I can't get the Dell print.  The message I get is "Incorrect Port detected.  The current print job has been cancelled.  This printer is designed to work with USB cables only.  The current software setting is not set to USB port.  Make sure you use a USB cable (and) the printer are set to a USB port. "I followed the instructions to set the USB port, and it seems that the port is, in fact, enabled.  I know that USB cable works, because he worked with the old desktop computer.

  Hi jwfinnashville,

  According to the Dell website, this can happen if the printer drivers are not installed properly.

  On the Dell site, they suggest to install a fix to uninstall all the drivers printer completely from the computer, then restart the computer and then reinstall drivers from the Dell website and check out them.

  Download the patch here to remove all printer drivers

  See also: http://en.community.dell.com/forums/p/19251369/19406642.aspx#19406642

  Then download the printer drivers for Windows vista 32 bit from link here and check

  For additional support, post your request in the Dell forums.
  http://en.community.Dell.com/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install HP LaserJet printer

  Original title - installation of the program

  The only program that I tried to install so far is the range of HP LaserJet printers. I did what the instructions but nothing helped, PLEASE help

  Hello

  Try asking your question in the Support Forum of HP printer.

  They will give you all the assistance you need.

  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

  See you soon.

• Cannot install HP Laserjet 3055 printer in Windows 7

  HP laserjet 3055 printer: how to make it work with windows 7. my cd of hp don't download; says that I need the administrative skills, I have. tried to do through features of windows 7 and it does not

  * original title - hp laserjet 3055 printer: how to make it work with windows 7. my cd of hp don't download; says that I need the administrative skills, I have. tried to do it via devices windows 7 and it does not *.

  Hi jaymathumboldt,

  Have you tried to download the software/drivers from the HP website directly?

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1140780&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=1161389

  I hope this helps!

• Cannot install a network - error message: this wizzard can not configure a network connection.

  Vista Business SP2 32 bit OS

  Impossible to set up a network connection using a wizzard.  Message: This wizzard cannot set up a network connection.

  A broadband connection was founded prviously.  There is no display of the network in 'connect to a network window.

  a new folder by name hiddenpbk appeared on the desktop and through which I can connect to the previously established connection.  but can not connect via "connect to a network window.  Neither I am able to set up a new connection using the wizzard.

  Please helpme.

  Hello

  Can you explain what connection to a network means in your case?

  What exactly you want to connect?

  If you have a valid broadband (Internet connection), you are already connected to a network.

  If you want to check your wireless system follows this process.

  If as a result of this process, you find something wrong, tell us what it is.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Cannot install factory reinstall the CD/USB on drives smaller than what came with the computer. Need to fix it as soon as POSSIBLE!

  Recently installed Samsung 840 Evo SSD in my Dell Inspiron 15r 5537. They created the restore disc factory of the previous disc thought they would just install on the new SSD. After trying to install get you a mass that told you can't reinstall on drives less than 400 some odd gigabytes. I thought I'd try an OEM of Windows 8 CD version I have. Who does not install as well you get a message that says something like: "the current installed does not match the product key." So now I'm stuck with a new computer with a SSD brand new and I can not install an operating system on it. I bought six machines from Dell in the past six months and I want a cure for this ASAP or will ever I bought a Dell product. James

  Hi James,

  You cannot use any old disk OEM of Windows 8. You need a Dell Windows 8 disc. Click here to order a.

• Windows 7 cannot install the drivers for my USB devices.

  Whenever I have connect my USB devices, windows is now impossible to install the unit. It shows the driver installation icon in the notification area and finally said failed. Devices are displayed in Device Manager with an exclamation mark in it. When I try to manually install the driver, it gives a prompt with error message "Windows found driver software for your device, but has encountered an error trying to install it." . The system cannot find the specified file. No idea why?

  Hi Halley,

  Have you tried another USB port?

  Please follow the steps to solve the problem USB drivers.

  Check the status of the USB in Device Manager:

  a. go to Control Panel - Device Manager.

  b. If you see a yellow exclamation mark next to the device, the driver is disabled and must be updated.

  Method 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2: Reinstall the USB controller:

  a. click Start, click run, and type devmgmt.msc.

  b. expand USB controllers

  c. right-click on each USB drivers and select uninstall

  d. restart the computer and Windows will automatically reinstall the USB controllers.

  Reference article

  Install a USB device

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  For more information:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Please post back with the result. If the problem is still not resolved, we will be happy to help you further.

• Cannot install flash player, download run script error: could not set correctly - undefined reference innerHTML or zero

  Unable to download/install Flash Player, download script error: cannot properly set innerHTML reference undefined or null

  Hello

  The script error is caused by the DPI setting on your system.  If the DPI setting is set to 100%, 125%, 150% or 200% Setup returns the script error. If your DPI setting is set to something else, please set it to one of these and Setup online should work.  To check/change the DPI setting:

  1. Start the control panel and go to control Panel\All Control Panel Items\Display
  2. In the left menu, select set size custom text (PPP)
  3. In the Windows Setup custom DPI select 100%, 125%, 150% or 200% in the menu drop-down
  4. Click OK
  5. Select apply
  6. Open a session/disable
  7. Online installer should now run without displaying the script error.

  A fix for this should be released in the coming weeks.

  --

  Maria

• Installation clean P580 Win 7 Ultimate 64 bit - cannot install driver Intel WiFi correctly

  Driver installation went well after a clean install. I was not aware of any special settings or any need to install some drivers in the order. So maybe I did not just something.

  I noticed that there was no WiFi service. I have downloaded and run the file 0zwl03ww.exe, which is listed as driver WiFi Intel for Win 7 32/64. I got a message saying that something could have trouble with the installation. So I chose rerun. Asked me if I wanted to replace an existing file. I said "Yes to all". The result was a message saying "access denied." Later, there was still no WiFi and no WiFi service pilot shown in Device Manager.

  I restarted the PC, hoping it would help. Still no WiFi and no shown in Device Manager.

  I looked at the folder C:\Drivers containing the driver files and subdirectories. I removed those and tried to delete the folder. I didn't have the right to do. I checked the security settings on the folder and showed a red X with a message saying that the security settings are not available.

  When I try to reinstall the driver, I get the same results reported (files to be replaced), but no files are displayed in Windows Explorer in this folder.

  I tried to restore the original file to the Recycle Bin. Restoration happened, but now the files are gone.

  There is another pilot provided for Liteon & CyberTan; This doesn't seem to be the right driver.

  If the PC is running, LAN, internet cable OK - but I'm stuck with no WiFi. Can anyone help? Thank you!

  I found and ran a setup.exe for Win7 inside the extracted folder. I went through the typical installation of choice routine and told me "The Intel ProSet Wireless WLAN software Setup Wizard ended prematurely" with no further explanation given.

• Install HP Laserjet 3055 on my Acer 5050 Note

  Ask for help in the installation of HP Laserjet 3055 on my Acer 5050 laptop, because I don't have the installation CD more. Can someone help me. Thank you!!

  [Moved from Community Participation]

  Hello

  Should you be able to find the software you need from HP support

  http://WWW8.HP.com/us/en/drivers.html

  Don

• Cannot install error OF EMPIRES II this facility is not a Retail Version.

  Original title: why the patch that I downloaded from Microsoft.com indicates that the AGE OF EMPIRES II disk I bought at Wal-Mart is not a retail disc?

  I installed the first AGE OF KINGS disk then I installed the Conquerors Expansion second disc then applied the patch that proptly says 'this facility is not a commercial Version,' OK

  Hello

  What operating system is installed on your computer?

  I suggest you follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/258496

  If the problem persists contact age of empires support for additional help:

  http://support.Microsoft.com/GP/games-for-Windows

• Cannot install windows live messenger error: a win32 program not valid

  Original title: Messenger questions

  Hello, I am trying to get windows live and messenger installed on my computer, I recently had to install a new hard drive and am not seen no amount of undue heartburn, trying to get things resettled, I downloaded windows live and messenger from the site of Microsoft, saved on the desktop, then tried to open it and install the Message reads not a valid win32 program? What Miss me?

  http://explore.live.com/Windows-Live-Essentials-XP

• Cannot install updates Windows on Windows 8, it will not be passed to 0%.

  OT: windows updates

  I have Windows 8.  My windows crashed.  I managed to reinstall everything to factory settings.  When I go to control panel and click search for updates, it shows I have updates that must be installed.  When I click on install updates that the bar moves, but the State never goes from 0%.  I disabled my firewall to ensure that my firewall was not blocking the updates and I restarted several times, but still had no chance of make install.

  Hello

  There may be a TON of updates... perhaps 1.5 GB or more.

  It might take some time to get to 1% according to your internet speed...

  Have you noticed how much was being installed?

  Check in the Task Manager to see if you have all network activity...

  You could actually have a problem with the Windows updates, but then maybe not...