HP Jet P1102w laser: find IP address of HP P1102, WiFi Internet connection

Similar Questions

• EPrint jet p1102w laser

  my printer is connected to the wifi network the same as my computer

  When I get the ip address and enter it in the search bar the hp page opens

  When I press the tab of web service hp Open nand is written the word activate

  When I press it it says connection but then suddenly cannot connect to check your internet connection

  BTW, my computer has a 32-bit processor and windows 7

  Hello mominkashif,

  Welcome to the Forums of HP Support!

  I see you are trying to activate the Web Services on the LaserJet P1102w. You can install this update: HP LaserJet P1102w Firmware Update Utilityand then try to enable Web Services. You will need to have a USB connected the printer to the computer to do the update.

  Let me know if this helps better enable Web Services.

  Kind regards

• HP jet p1102w laser: printing on hp laserjet p1102w error

  When I come back to print from my iPhone and iPad the printer says error could bot print I have tried reseting cartridge changing power rest but he didn't he had printed one page and display the error message please help

  Hi MohamedAlaa,

  After that you went through the second step: print a Self Test / Configuration Page of the device. When she printed it showed an IP address? He mentioned that if something is not on the sheet?

  In the meantime, please see this post, iPhone & iPad can't Airprint for LaserJet p1102w, by @VisionAiry. To make sure the firmware on the printer is up-to-date.

  Once done, go through this guide once again, setting up the printer on a wireless network for the HP LaserJet Pro P1102w printer. To reconnect to the network. You have to turn on all devices again later and check that they are all on the same network!

  Hope this works for you and have a nice day!

• HP Jet P1102w Laser: cannot install HP Laserjet P1102w correctly (USB detects no not my printer)

  Dear Sir.

  Recently I bought a new HP Laserjet P1102w, my printer is on and also attached with USB, but when I go to install the Geniune CD with bundled software, the error came and procedure do not fill correctly, what should I do? I want to use it with wireless printing, but how can I install it correctly? Printer showing also the number real name and model on PC... What is c?

  

  Hi @NaveedShaikh,

  I see by your post that the printer is not detected. I want to help you solve this problem. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Thanks for providing the excellent screenshots. The CD is used for different models, the P1100 is your printer series.

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet. Make sure that the USB cable is connected directly to the computer. (not a station or a hub) Try a different USB port on the computer.

  This can also occur when the printer is already recognized as the USB connection and windows does not yet detect.

  Remove the USB cable plugged in, remove the printer in the devices and printers (if the list) and the Device Manager.

  To access the Device Manager:

  Press the windows key and press X on the keyboard at the same time in the office.

  Then click on Device Manager in the list.

  Verify that the connections in Device Manager for the entries of the printer, under Bus USB controllers are looking for USB, Mass Storage Device print media or anything with a yellow exclamation point or an unknown device. Right click and uninstall the device. Then reconnect the USB cable and it must be detectable again.

  If you're still having problems, unplug the USB cable, run uninstall and reinstall the printer software again. Do not connect the USB cable until you are prompted during the installation.

  If there is anything else I can help you, let me know. Thank you.

• Professional Hp Jet P1102w Laser connection problem.

  With a Router 2 previous son worked very well.  I just changed my AT & T U-Verse was gvien a new router 2 son.  I can connect to the internet without problem, but when I try to do a reinstall my printer P1102w wireless I get the following message "the printer has been able to connect to the network wireless using the wireless identification information.  However, this computer is unable to communicate with the printer.  Please check printer is on the same network as the computer and try again. »

  I have only a single network and my hp desktop computer is connected wireless to the router.

  I am on Windows 7 Professional and Norton Internet Security 2011 and everything is updated.

  I contacted AT & T support, but as usual their help was worthless.  Any advice would be appreciated because I spent many hours trying to over come this problem but nothing works.

  Thanks, Martin

  Reboot the router by pulling its plug JUST before you start the installation process.

  What type of encryption you are using (WEP, WPA, WPA2)?

• Jet P1102w laser: Printer USB connection error

  Hello

  Whenever I have try to plug the USB into my computer to print something a message pop up to say will "the device you connected is not readable by this computor" it has two options - ignore or eject. If I ignore the message, the printer seems to be offline. If I ejected, well, it is ejected.

  My computer is not the only one experiencing this problem. Two other laptops have been discovered to get the same message. They are all three Macbooks.

  We've had this printer for two years now and it has just started to happen. The printer also has many other issues that we pushed through, and it seems unfortunate to stop on it now; Help, please.

  Thank you!

  Greetings @KirsiAS,

  Thank you access the Forums from HP Support for extra support! I see that you have problems with the printer is recognized. I will do my best to help you with this problem.

  Something on the Mac is to recognize the printer such as a hard drive. Because the printer has a feature called Smart Install, which installs only the printing automatically on Windows software.

  Try unplugging everything, make a full stop down on the printer, and then connect the USB cable to a Mac, while the printer is still off, then start the printer.

  You have Parallels installed on the Mac?

  Temporarily disable Parallels, for the Smart Install is recognized on the Mac.

  If you do not have Parallels, then we will need to turn off Smart Install to install the printer on the Mac.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• HP jet P1102w laser: how will I know if my hp jet p1102w laser is refurbished?

  I got a replacement and that he was supposed to be NEW but I wonder if it is actually refurbished.

  Hi Catsch,

  It is the number of the product. (example CE657a) How can I find my model number or product number?

  Thank you.

• Jet P1102w laser. Will it work with Windows 10

  Tried more 4 hours will not go wireless or with sub

  Hello

  Yes, fine stationery HP full feature software and driver for him:

  http://ftp.HP.com/pub/softlib/software13/COL32431/bi-80329-11/hp_LJP1100_P1560_P1600_Full_Solution-v20120831-50157036_SMO.exe

  Please download and install on your computer.

  Kind regards.

• Jet P1102w laser: Laser Jet P1102w is not under tension and will stay on. needs to reinstall repeated and unplug.

  Is there an incompatibility known with this printer and Win 7 Pro (64 bit)?

  Every two days that a there's something blocking the printer and it won't power on. (I see many posts that references the problems of people with sleep cycle, but I think it's different).

  It happens to where when you press to feed it upwards, he travels a short start-up test and stop it right down immediately. Only reboot never correcting something. I tried the voddo to unplug the power cord at the back for a while. Usually, I end up having to remove and reinstall the entire system. I connected via USB - wireless seems like a dream until I get the USB connection sorted. I don't have installation CD so I am at the mercy of the drivers that windows is striking automatically across, but I have a test page to migrate all the data if this is useful.

  When I don't have work I got it check for updated firmware and drivers and still it says it's updated. I think that there are 'better' install files to use for a permanent solution?

  Welcome @clericmb,

• HP Jet P1102w Laser printer

  The red bar that the book goes... is red hot right now and the paper smokes when he passes by... WhatsUp?

  Hello betya.

  You may be confusing the smoke with steam or moisture. Very thick smoke and stay in the air for a while or should quickly dispel?

  This article explains in detail the question if it is a question of steam.

  HP LaserJet printers - printer emits steam or moisture

  Heat and humidity, created by the printing process dissipate through the vents at the back of the product, or by an internal fan. Moisture can sometimes appear on the trailing edge of the book on jobs in small print.

  The amount of moisture is low, even if it is visible. When the paper is released from the product, small water droplets are sometimes deposited on the trailing edge of the paper. In a few minutes, the paper moisture evaporates. Once the moisture evaporates, the paper is not warped somehow.

• Is a message "cannot find server" a problem with Internet connectivity or something else?

  Original title: Net question?

  When I get a message "cannot find server", is this a problem with internet connectivity or something else?  MSN and explore will be not open.  Thank you.

  Hi Aziz,.

  The Cable Guy came and installed a new modem and the new thicker cable.  So far so good.  Thanks for your reply.

• Laser Jet P1102w, need to factory reset

  Hello. I have a Laser Jet P1102w, which I had set up to print wireless before and had difficulty. So in the integrated Web (EWS) of the printer server I set up with an IP address manually and subsequently he fiine. Then my ISP sent a different router that I have implemented. Unfortunately I did change the IP address manually on my printer to the integrated Web server, first of all. Oops!

  In any case, I reinstalled the printer using the original HP DVD installation disc and also downloaded all updates firmware and HP Scan and print doctor. But it will not complete the wireless installation, I get an error message: "the printer has been able to connect to the network wireless using the wireless identification information.  However, this computer is unable to communicate with the printer.  Please check printer is on the same network as the computer and try again. »

  I am able to print a page of Self Test/Configuration of the printer which shows the old manual IP address that I had put in the SAP. Of course this IP address will not bring up the SAP any longer so I can't change it to manual. Config page shows also that my printer is on the new network, as it's my computer. I think that printing held back by not being able to connect with the new router from this router is an IP address anywhere near manual that I put on the printer (if necessary).

  I saw in the other responses to requests for similar information that I can get rid of the IP address manually, if I do a factory reset. Except that I do not know how. P1102 w doesn't have a 'control panel', just the wireless button and another "X" button - the one who insisted to get the Configuration Page. Press together does not reset anything.

  Can you tell my how to do a reset to the factory settings? Or think of another way, I can get into EWS printer so I can fix this? Or another solution?  Thank you!

  Hi, me again. I managed to reset the printer by following these steps: 1. get off the printer. 2. press and hold pressed the buttons 'X' and wireless at the same time and then press the power button. 3. always held the X and the buttons wireless for a total of about 15 seconds to push at the start. Then released.

• Computer crashed and has been restored. I can't find my address book Outlook Express or Outlook Express folders. Please help me.

  Computer crashed and a computer store restored our operating system. However, I can't find my address book Outlook Express or Outlook Express folders. Please help me.

  Kewl! Did you find a folder named Outlook Express which had a number of inside DBX files? And there a file called Folders.dbx? If so, that's fine.
   
  Write on the way and in the new identity of OE: file | Import | Messages. Select Microsoft Outlook Express 6, and then point to the folder that you have found.
   
    

• My computer crashed and I can't find my address book Outlook Express, any ideas?

  My computer crashed and I can't find my address book Outlook Express, any ideas?

  • Define 'crash '.
  • OE else works?
  1. In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
  2. Do a search, then search for *.wab
  3. If you find your address book, open the address book in OE and then file | Import | Address book (wab) and navigate to the location that you found it in.

• When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network. Why would it gives this error at startup.

  When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network.

  Why would it gives this error at startup?

  It is not a Windows problem, it happens very early in the boot process until Windows is still a part of the image.  Your computer is configured for a remote network via PXE boot and there is no this PXE server so that you get this error message.  With PXE network boot, you can start a computer without him having a hard drive, the operating system resides on another machine on the network.  When the BIOS does not find the PXE server it gives you the error message, and then it proceeds to the next start equipment, which is probably your local hard drive.  Go into the BIOS and disable the PXE boot option or move it to the bottom of the boot order so that the hard drive is set as the primary boot device.

  John