HP LaerJet 5 does not not under Windows 7

Similar Questions

• Z500: Samsung 840 evo does not (under windows)

  Hello

  I replaced the build-in the hard drive in my Ideapad Z500 with a brand new Samsung 840 evo and tried to install Windows 8.1 on it.

  (I also replaced the dvd player with a hard drive caddy, where I put the old hdd)

  Unfortunately, I can't install windows.

  Whenever I try to format the primary partition, nothing happens for about 3 minutes, and then he throws the error code 0 x 80070057 "unable to create partition" (actual description is in German)

  When I boot from the old hdd and try to format the SSD inside windows, it does not either.

  Magician tells me, everything is fine with the ssd, but it cannot perform all tests, because there is no volume

  SATA controller mode is AHCI.

  Boot mode is UEFI.

  Here's what I've tried:

  -In installation: diskpart-> disk list-> select disk-> own-> convert gpt-> exit (exits without errors)

  -Manual partitioning with parted magic

  Someone at - it an idea that doesn't require you to disassemble the laptop new? That's what I want to only try if all else fails. I was very careful when you replace the readers and did not notice any physical damage, suspicious sounds, etc.

  
  

• 8 window does not accept windows updates!

  I recently downloaded windows 8 and does not receive windows updates.  This does not prevent my installation things like itunes!  I've tried everything I can think of, but nothing seems to work.  Anyone know why?  I disabled the firewall, I tried windows update diagnosis, research on windows update for updates and does not display anything, I tried virus checking.  I am at a loss and is about to throw the computer and get a woman in the place!

  Hello

  Thanks for posting your question on the Microsoft Community.

  As you've already tried several troubleshooting steps, I suggest that you try to reset the Windows Update components. This clears the cache to update and will allow windows to check for each update is available on our server. If an update is found is not installed, which will appear under available updates.

  I suggest that you follow the steps below and try to reset the Windows Update components:

  1. Press Windows + X key.
  2. Click on (Admin) command prompt.
  3. Disable Windows Update services. Type the following commands and press on enter after each line
     1. net stop bits
     2. net stop wuauserv
     3. net stop appidsvc
     4. net stop cryptsvc
  4. Reset update components. Copy the following text and paste the same in the command line window.
     1. Ren %systemroot%\SoftwareDistribution SoftwareDistribution.bak
     2. Ren %systemroot%\system32\catroot2 catroot2.bak
  5. (Note: shortcut keys do not work in the Windows command prompt, please use right click to paste these codes.)
  6. Restart the Services. Type the following commands and press on enter after each line:
     1. net start bits
     2. net start wuauserv
     3. net start appidsvc
     4. net start cryptsvc

  Try to check the updates now, let us know if you encounter error messages.

  Hope this information is useful. Just reply with the results and if you need help or have any other questions about Windows, we're here to help.

• Lenovo battery Z50 - 70 does not load Windows 8% 10

  Hi lenovo Z50-70 battery does not load Windows 8% 10

  I uninstalled the old Yang APP and reinstalled this

  were of no irrelevance that even once and adde the application in the windows store "parameters of Lenovo.

  And it does not load beond 8%

  A have you tried a new charger did not help

  text is pretty funny to 8% and 2 min at full load :-)

  Try opening the energy manager and click on settings, click on conservation mode to turn it off, then unplug the power cord and plug it back again and you should see the battery load again.

• Winows lost password does not open windows

  Wind ows 2000 password lost does not open windows

  Keep passwords secure - Microsoft on passwords strategy
  http://support.Microsoft.com/kb/189126

  What to do if you forget your Windows password:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

• "This product does not support Windows NT

  I'm trying to install my Carmen Sandiego game on my Vista computer.  This drive worked fine on my XP computer.  Unfortunately, my XP is dead and I am now a Vista user.  I inserted the disc, started the installation, and then all of a sudden the installation stopped dead and the message "this product does not support Windows NT" jumped on my screen.  What I want to know is what does this mean mean and how do I get around it to install my perfectly good and entertaining game on my computer?

  Use the XP Compatibility Mode

• MFC - 290C scanner does not. Windows error solution

  MFC - 290C scanner does not. Windows error solution

  Hello

  ·        You did changes to the computer before the show?

  ·        If it works much earlier?

  ·        What is the exact error message you get?

  I suggest that you follow the steps in the link and check if it helps you to solve the problem:

  http://www.brother.com/E-FTP/windowsvista/us.html

• Vista SP2 does not updated Windows because the Windows Modules Installer (Trustedinstaller.exe) crashing

  Hello.
  My laptop Vista SP2 does not have Windows updates due to the Windows Modules Installer (Trustedinstaller.exe) crashing:

  Error message:
  "Signing of the problem:
  Problem event name: APPCRASH
  Application name: TrustedInstaller.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01af1
  Fault Module name: wcp.dll
  Fault Module Version: 6.0.6002.18005
  Timestamp of Module error: 49e0380e
  Exception code: 80000003
  Exception offset: 0013b 972
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 2057
  Additional information 1: fcbe
  More information 2: 21dec0ca93c87c4af4036e2c4a4d224a
  3 more information: 93a 4
  "Additional information 4: 172cbe47bfd87945783d7b08d7f02897.

  Update history shows a number of updates that haved 'impossible' to install accordingly.
  Any ideas how to solve this problem for all my PC install Windows updates pending?

  Thank you very much!

  Hi Spoon579,

  Jose is correct that we need more information. Without any information only generic suggestions that we can supply to run SFC/scannow here or CheckSUR here

• Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve

  Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve, is one knows how to fix this problem

  Hello

  Your Windows passes genuine validation? If your activation session has expired and that windows did not pass the validation, it will not show any visual effect such as background noise, themes etc. It will only show a black screen and at the bottom right of the screen you can see attention.
  Cihan

• Computer does not load Windows after reset after installing HP-J6413

  Bought J6413 all-in-one; the software that is installed according to the instructions on the CD.  Attempted to restart after the installation, the computer hangs upward after shooting intself on and display the logo of the motherboard, does not load Windows.

  Printer is off, did reset, everything was fine, Windows loaded etc.  Repeat the action and came to the conclusion that the power of the computer with the printer off left (it's a fax machine, it should be all the time) or even reset the onboard computer after, say, install new software, prevents the loading of Windows on them turn on the computer.

  Only possible mode of operation is to put off the printer, then turn off the computer, then turn on printer to serve fax standby and then do the same set of operations before turning to new computer.

  Please refer to the manuals that you received for your PC and disable the "USB Émulation" and "USB devices starting" the BIOS settings.

• my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

  my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

  Hello

  You tell us what type of license you have.

  If the former was preinstalled, NO, you cannot transfer it.

  Read this information:

  If the laptop came with the preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key supplied with the laptop is preinstalled OEM license and is not transferable.

  OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

  The above applies also to OEM system builders licenses.

  License of operating system in detail, that you buy and install yourself, are allowed to be transferred to another machine.

  And retail licenses also can be installed on a machine at one time.

  ___________________________________________________

  And please read this, you can:

  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/licensing_faq.aspx#fBid=cbW6pY-wjS6

  See you soon.

• Windows does not ACTIVATE WINDOWS can't

  PLEASE HELP ME!

  I did a restore and recovery backup because only my WINDOWS 8 stopped to update and gave me problems with speed. I did everything you can imagine. I even run the tweaking.com from windows to check for problems.

  Now the computer does not activate WINDOWS and gives me this message, please activate windows... I click top then says Windows can not be activated, please contact Microsoft Support.

  I have a question and problem and I really need to know how to operate. If I have to reset the computer and reinstall Windows (which hopefully livery) please let me know. At this point the computer is not activate windows and is a real problem

  I appreciate your response.

  Run a full scan with Malwarebytes and AdwCleaner , and then run file System check (SFC) Scan and repair the filesystem - Microsoft Community.

  Uninstall any antivirus bloatware, use built-in Defender.  Use the special tool to uninstall any inflated AV: uninstallers (removal tools) for common - antivirus ESET Knowledgebase software

  Tweaking registry cleaners and the suites (not counting as CCleaner) ruin Windows.

  I would try first to restore the system to a point where he was running better, or if it does not help then refresh or reset: How to refresh, reset, or restore your PC - Windows help

  As a last resort, you can follow this excellent tutorial to make an own 8.1 Windows Installer which puts the quality of installation in your own hands you and keep.  Just stay away from Tweaking suites, stick with integrated antivirus, Defender, keep everything off Startup tab in Manager tasks, watch your freeware installs like a Hawk of snitches, periodically scan with Malwarebytes and AdwCleaner

• Windows 8 does not support Windows Mobile Device Center 6.1 and 6.5?

  Windows 8 does not support Windows Mobile Device Center 6.1.    Anyone know of any solution to the connection on Windows 8 terminals with Windows Mobile 6.1?

  Hello Manu,

  Thanks for posting your query in Microsoft Community.

  From the information you have provided, I understand that you need information on Windows Mobile Device Center for Windows 8. I will certainly give you with this information.

  Microsoft Windows Mobile Device Center replaces ActiveSync for Windows Vista and Microsoft Windows 7.

  Windows Mobile Device Center 6.1 is currently available for the following versions of Microsoft Windows Vista.

  • Windows 7 Ultimate
  • Windows 7 business
  • Windows 7 Professional
  • Windows 7 Home Premium
  • Windows 7 Starter
  • Windows Vista Ultimate Edition
  • Windows Vista Business
  • Windows Vista Business
  • Windows Vista Edition Home Premium
  • Windows Vista Home Basic
  • Windows Vista Server

  See the link.

  http://support.Microsoft.com/kb/931937/en-us

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

   

• I have adobe acrobat 7 Professional and I am trying to install it, but the old serial number does not work, windows 10

  I have adobe acrobat 7 Professional and I am trying to install it, but the old serial number does not work, windows 10

  See download Acrobat 7 and CS2

• AutoPlay does not not under Windows 7 Professional (64 bit)

  AutoPlay does not.  After searching the forums took measures following, all with the same results.

  Autorun Panel:

  (1) the machine reset to default, Panel closed and recycled.

  Set of 2) each option for the program appropriate (s) desired and recycled machine.

  Regedit:

  (1) registry implemented as backup.

  (2) adjusted HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/services/cdrom/AutoRun - with a value of (1).  Left regedit and recycled machine. Note: The article below Autorun (AutoRunAlwaysDisable) contains a list of devices. Since many of the listed devices are my engraver of CD/DVD BD - ROM mark, this could be the cause of the problem?  If so, how to change the list so that AutoPlay will work?

  Hello

  Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.