Vista SP2 does not updated Windows because the Windows Modules Installer (Trustedinstaller.exe) crashing

Similar Questions

• Vista SP2 does not auto update

  Vista SP2 is not in the automatic update, while all other updates are normally found. I have all necessary installed update that is required for SP2, including SP1. How can I fix?

  Thank you!

  Eric

  Both - SP2

  Hardware and software which if present will result in Windows Update does not offer a service pack Installation problems are known to occur with the hardware and software in the following list. Service Pack 2 for Windows Vista and Windows Server 2008

  • Systems of Intel ICH7 with Bluetooth that are connected to a USB 2.0 hub

    Service Pack 2 for Windows Vista and Windows Server 2008 is not available through Windows Update for customers who have an Intel ICH7 with Bluetooth system that is connected to a USB 2.0 hub. There is a known issue with the service and the hardware configuration. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

    970408 (http://support.microsoft.com/kb/970408/) A Bluetooth device stops working intermittently on a computer that is running Windows Vista Service Pack 2
  • vLite

    If you used vLite to customize your Windows Vista installation, you may have removed required system components. To work around this problem, install the latest version of vLite. For more information, see at the following vLite Web site:

    http://www.vLite.NET/ (http://www.vlite.net/)
  • HP TouchSmart IQ700 models of computers

    There is a known compatibility issue between SP2 and the specific USB hardware on the motherboards of this range of products.

  • Windows Live Messenger 14

    There is a compatibility problem with Windows Live Messenger 14. An upgrade of the operating system causes Windows Live Messenger 14 to stop working. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

    972634 (http://support.microsoft.com/kb/972634/) you cannot start Windows Live Messenger 14.0 after installing a service pack Windows

    Etc.

  TaurArian [MVP] 2005-2010 - Update Services

• My Windows Vista laptop does not start successfully after the upgrade to SP1

  I use Windows Vista Home Premium. I've updated my laptop with Vista service pack 1. After that my laptop will not start, it displays a message saying "Service Pack did not install. Restoration of the changes. Do not turn off computer. "after windows loading and then the computer restarts and the same thing repeats. I also didn't get a vista CD or a restore with my laptop CD. I tried a solution anywhere, but I couldn't find one. Please help me quickly because I do all my work laptop and I don't don't want lose my files.

  Perhaps you should review this KB

  Things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx>

  Information about Windows Vista SP1
  What you need to know before you install Service Pack 1
  http://support.Microsoft.com/?kbid=936330>

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366>

  How to uninstall Windows Vista SP1 as a troubleshooting step
  http://support.Microsoft.com/kb/948537>

  Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by automatic updates:
  http://support.Microsoft.com/?kbid=948343>

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx>

  Windows Vista Service Pack 1 standalone installation) (KB936330)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en>

  Go to your retail store, they should have the disk recovery for you or you need to go to your manufacturer directly because the manufacturer is best qualified to support the software that the manufacturer has installed on the hardware, provide your serial number and order the CD on their part. I bet they arrange an expedition to the France and tax treatment for it, but should not be too much.

  Note: The manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

• Windows Update does not update Windows Vista platform.

  I recently tried to update my Windows Live Messenger and I get a message that I need this new platform update. The site for the update page told me just to run Windows Update and install it. However, after that Windows Update returns with no such update for my system. What can I do about it? I am running Vista Home Premium 64-bit edition. Please instruct me on how to get this update. I do not wish for the answers that tell me simply run the update client, which does not work for some reason any. My update client is also perfectly up-to-date. Any help is appreciated.

  The "platform update" required by Windows Live Messenger is not Windows Live application update security. It can be installed manually. The experts in the Windows Live forums will be able to help you to do (especially if you try to install Windows Live Messenger Wave 4 beta).

  In other words, it is a question of Windows Live Essentials, not an update of Windows (although Windows Update may offer updates to Windows Live Essentials).

  See this discussion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6191a129-e5ff-4cbe-b4dd-3d61d4764d2d/

  PS: I changed my mind on what Windows Live Help forum, you need to use.

  You will find assistance appropriate in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  NOTE: Read & guard this "sticky" before starting a new thread for help: http://windowslivehelp.com/thread.aspx?threadid=8a67c6f7-8a04-48d0-972e-1252034d6390

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows does not update this is the message I get. The website has encountered a problem and cannot display the page you are trying to view. [Error number: 0 x 80070424]

  My system is:

  Microsoft Windows XP

  Professional

  Version 2002

  Service Pack 3

  I never had this problem before.

  AnnaMallett,

  It is usually enough to do this: start > run and type

  Regsvr32.exe c:\windows\system32\wuaueng.dll

  and press the ENTER key. If this does not resolve the issue:

  Start > run and type in these lines. Press the ENTER key after each one:

  net stop wuauserv

  Regsvr32.exe c:\windows\system32\wuapi.dll

  Regsvr32.exe c:\windows\system32\wups.dll

  Regsvr32.exe c:\windows\system32\wuaueng.dll

  Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll

  Regsvr32.exe MSXML3.dll

  Regsvr32.exe qmgr.dll

  Regsvr32.exe qmgrprxy.dll

  net start wuauserv

  Restart Windows, and then go to Windows Update.

  OR

  See if doing a Reset fixes the problem (throwing the difficulty in default and if necessary, aggressive mode), http://support.microsoft.com/kb/971058>

  05/23 / 1108:28: 03:00

• Windows 7 does not update after changing the BIOS battery

  I recently changed the BIOS battery for my desktop which runs on Windows 7. Even after that windows 7 is not able to update.

  Windows Update checks the updates forever!

  

  the action center has this message:

  

  and the history of the update is like that...

  

  I also tried the tool micrsoft 'Fix it '. It was of no use. Windows Update stopped for checking updates and gave the error: "80072f8f.

  Can someone please help to fix this error, this will also allow me to upgrade to Windows 10!

  Thank you.

  Use the following tutorial to reset Windows updates completely and check if it helps:

  Full updates to reset Windows

• Windows Vista mixer does not switch windows

  I use Windows Vista 64 bit on a laptop of Ed. When I first bought my laptop 4 months ago, it worked.  I have the windows switcher icon in the taskbar, but when you access the Windows I have open turn out.  I get a box on the screen with all the windows open as an icon instead of the windows open, floating on the desktop, so you can scroll through them.  I tried to go to the "customization" and "windows color and appearance ' and that 'windows aero' is selected and clicked OK and apply, but it does not work.  When you try to "switch" I always get the box in the middle of the screen.

  Help and thanks.

  Libtech

  Hello

  Try to update your display and video driver using the methods below.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows update does not update windows defender and so tried to update via windows defender that shows also no update

  Hello!

  I've always used Windows updates to warn me of updates and then I install them. Normally Windows Defender is updated daily through windows updates.

  For some reason, he is not showing / offering of windows defender updates.

  Time windows last defender of the shows has been update on my pc was 11/2.

  I know updates have been released since then for Defender, but I can't get them.

  Even if it does not automatically show me, I say manually updates to check updates and which shows nothing for windows defender.

  So, I went to the windows defender program and used the update it.  This shows also no update available.

  Can someone please help to understand what is the problem?

  Thank you so much!

  I have windows vista sp1, 32-bit.

  This post is in some sort was added here and was a dup which seems to be added after a merger.   He had nothing to with the post merger, which needs to be separated.

  This thread has been merged into error and am awaiting to be separated.

• My Vista pc does not work properly, getting the error 1097

  It contains errors of 1097

  and it does not correctly cause of which my system is facing problems.
  How can I reinstall the software?
  can I format the system?
  my pc name is Zenith and I got windows vista startup
  Please tell me the solution as soon as possible

  Hi Vikykhandare,

  1. when exactly do you get these errors?

  2 - does this happen when you try to run a specific program or with all programs?

  3. what issues you are facing?

  Method 1:

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2:

  You can check out the following link and try the suggested steps to optimize PC for better performance and check what is happening.

  Optimize your computer for peak performance

  Optimize Windows Vista for better performance

  Hope this information is useful.

• Vista SP2 does not communicate well with my Epson Stylus R200

  Are some error messages such as low on ink, which was broadcast on XP is not on Vista SP2, is there a patch for this?

  "Nicbut" wrote in message News: * e-mail address is removed from the privacy * .com...

  Are some error messages such as low on ink, which was broadcast on XP is not on Vista SP2, is there a patch for this?

  It is strictly a printer driver problem.  Epson doesn't have no drivers for Vista or later on their website, you're stuck with the default from Vista drivers if you want to continue to use the printer with Vista or later version of Windows 7.

• JavaScript does not update/adjustment of the value of the point

  I currently have the function in my header html

  <script language="JavaScript" type="text/javascript">
  function rfc_emergency()
  {
  if ($v('P3_TARGET_COMPLETE_DATE') <= $v('P3_EMERGENCY_DATE'))
  {
  $v('P3_PRIORITY_EMERGENCY').value = 'Y';
  alert("this will be classified as a priority");
  }
  }
  </script>

  and I have this in the form P3_TARGET_COMPLETE_DATE html element attribute
  OnChange = rfc_emergency (this);
  
  I know the date by comparing work and I know $v('P3_PRIORITY_EMERGENCY').value = "Y"; is ongoing because I'm alert to work. My problem is $v('P3_PRIORITY_EMERGENCY').value = "Y"; in fact, does not appear to do anything. My radio (P3_PRIORITY_EMERGENCY) button remains unchanged. Any suggestions as to why P3_PRIORITY_EMERGENCY is not to 'Y '?
  
  I'm running 3.2 and I apologize for not having much experience with the java script.
  Thanks in advance.

  My mistake - missed you ask on an option button - they are more delicate with javascript because they are stored under a range of choices, then a simple $x () .value won't.

  You can also make use of $s () to set the value of the elements of the ApEx, which is actually cleaner than $x () .value as it automatically represents the different types of items:

  $s('P3_PRIORITY_EMERGENCY', 'Y');
  

  Hope this helps,
  John

  If you find this information useful, please do not forget to mark the 'useful' or 'correct' post so that others benefit as well.

• When I followed the update instructions that my firefox does not update, I clicked the button to update and the browser just closes

  When I click on help / about / update, it seems not that something is happening / Exchange with my browser.

   Application Basics
  

         Name
         Firefox
  

         Version
         6.0.2
  

         User Agent
         Mozilla/5.0 (Windows NT 6.1; WOW64; rv:6.0.2) Gecko/20100101 Firefox/6.0.2
  

         Profile Directory
  

           Open Containing Folder
  

         Enabled Plugins
  

           about:plugins
  

         Build Configuration
  

           about:buildconfig
  

   Extensions
  

         Name
  

         Version
  

         Enabled
  

         ID
  

         Skype Click to Call
         5.8.0.8855
         true
         {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
  

         Youtube Music Player
         4.11.0.30
         true
         [email protected]
  

         Java Console
         6.0.32
         false
         {CAFEEFAC-0016-0000-0032-ABCDEFFEDCBA}
  

   Modified Preferences
  

       Name
  

       Value
  

         accessibility.typeaheadfind.flashBar
         0
  

         browser.places.smartBookmarksVersion
         2
  

         browser.startup.homepage_override.buildID
         20110902133214
  

         browser.startup.homepage_override.mstone
         rv:6.0.2
  

         extensions.lastAppVersion
         6.0.2
  

         network.cookie.prefsMigrated
         true
  

         places.database.lastMaintenance
         1384358025
  

         places.history.expiration.transient_current_max_pages
         120635
  

         privacy.donottrackheader.enabled
         true
  

         privacy.sanitize.migrateFx3Prefs
         true
  

         security.warn_viewing_mixed
         false
  

   Graphics
  

         Adapter Description
         AMD M880G with ATI Mobility Radeon HD 4250
  

         Vendor ID
         1002
  

         Device ID
         9712
  

         Adapter RAM
         256
  

         Adapter Drivers
         aticfx64 aticfx64 aticfx32 aticfx32 atiumd64 atidxx64 atiumdag atidxx32 atiumdva atiumd6a atitmm64
  

         Driver Version
         8.822.4.0
  

         Driver Date
         2-28-2011
  

         Direct2D Enabled
         true
  

         DirectWrite Enabled
         true (6.2.9200.16571)
  

         ClearType Parameters
         ClearType parameters not found
  

         WebGL Renderer
         Google Inc. -- ANGLE -- OpenGL ES 2.0 (ANGLE 0.0.0.686)
  

         GPU Accelerated Windows
         1/1 Direct3D 10
  

  Hello mccormick.lee, please try to download the full installation file for the current version of firefox from https://www.mozilla.org/firefox/all/ and install it on top of your current installation.

• Vista SP2 does not install, error code 800f0900 and KB947366 does not correct.

  I tried everything above, and nothing works, please help.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista SP2 does not install

  I am slot than Vista Ultimate 32 bit SP1
  I am trying to install SP2
  I use a DVD made from the downloaded image on the site of Ms.

  The installation starts, but after about 3 minutes, it will fail with the following error message.
  "It is too late to perform the requested operation, since the Transaction has already been abandoned.
  Error_Transaction_Already_Aborted 0x80071a30.

  I have run the System File Checker - no not found errors.

  I searched this error but the only reference I can find is on the site of Microsoft France, and there doesn't seem to be a given solution.

  Help please

  Dave

  Hello

  Thanks for the reply.

  I used Nero Express to burn the DVD

  I have a broadband internet connection nominally 2 MB/s, but in reality, that speed is low, often fall to 500 KB/s

  I stay in England. The link you sent me regarding service order pack says that it is only applicable to the N.America. There is no reference to the order of the service pack to the United Kingdom.  Is there an equivalent site for customers in the United Kingdom?

  Initially I downloaded the Windows6 file. 0-KB948465 - X 86 .exe but it gave the error I mentioned above. While he was installing bandwidth problem could affect installation.

  Then, I decided to try and install from DVD and downloaded 6002.18005.090410 - 1830_iso_update_sp_wave0 - RTMSP2.0_DVD.iso and it burned with Nero.

  This has yet again, and at this point, I contacted you.

  Is it possible that the previous installation attempt failed caused a form any of the corruption that is causing the DVD version to not settle?

  concerning

  Dave