HP laptop: computer startup
I turned on my laptop and it says no bootable device insert disk
Hello
Follow the steps listed in the link below
http://support.HP.com/us-en/document/c01443463
Tags: Notebooks
Similar Questions
-
Y510P laptop computer startup problems
Starting the machine up to the computer hangs at the LENOVO white text on black screen forever. The computer only beginning will be properly once the computer is reset as soon as this step, then began again to power off. I have tried everything I can think of, I'v since the bios reset to factory default and need more qualified assistance. It's how portable computer was purchased and has never worked properly. Help, please! Laptop Lenovo Y510P. 64-bit windows 8 dual video card in the additional location. Software installed at the factory that accompanies it in store for most.
I couldn't find an email address of Lenovo support if you know please share.
Thanks for any help
-Alex
Hi Macido,
Welcome to Lenovo Community!
According to the request, we understand that you are facing problem with laptop does not start your laptop Y510p.
Please perform power drain by removing all external devices and shut down the system, now remove the battery and the adapter. Now, press on and press and hold power for 30 seconds and connect the battery and the adapter and try turning on the system and try to boot the system.
I hope this helps. Post back if the problem persists!
Best regards
Ashwin. S
-
HP Pavilion m6-1045 x intermittent problem laptop computer startup
My daughter has a laptop from m6-1045 x HP Pavilion only intermittent fails POST, the caps lock led will Flash 3 times repeatedly when it arrives. Sometimes a hard reset will fix the problem on the first try, it sometimes takes several tries. It seems to deteriorate. Can someone tell me which points to the code?
Hello
The blink code indicates a problem with your memory sticks, so the first thing I would say is to remove and replace the two modules and see if that fixes the problem.
The procedure for withdrawal of these modules is detailed from Page 64 of your & Maintenance Guide.
Kind regards
DP - K
-
HP G62 laptop computer cannot start windows.
Run the test at the start and test drive, both give the same error.
type: startup
result: failure
Failure ID: PG81W4-5L36A1-MFKR4J-6OU5O3 (not sure if they are equal to zero or a letter O in tientirely)
Description: hard drive 1
type: hard drive
result: failure
Failure ID: PG81W4-5L36A1-MFKR4J-6OU5O3 (not sure if they are equal to zero or a letter O in tientirely)
Description: hard drive 1
so, I guess, it's the hard drive, no?
How should I proceed?Additional info:
Model: HP G62 laptop computer
Prod.ID: LF772EA #ABZ
running windows 7
Hello
The error code will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced. This is also consistent with the question of commissioning.
If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.
If you live in the United States, contact HP here.
If you are in another part of the world, begin here.
If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.
Kind regards
DP - K
-
Need to reinstall Vista OEM laptop computer, but does not have install media
I already have the serial number of my windows that was on my laptop and now I need to install it on the same laptop. but I don't have the windows CD. So, I have to download it. but I can't find any valid and functional link to be on microsoft or any other Web site. is there anywhere to download?
* original title - where can I download a windows vista Enterprise edition? *
Hello
There is no available free and legal Vista download
Here are the different ways to reinstall vista:
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a microsoft dvd vista
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
Save all data, because it will be lost, do the above
-
Packard Bell Easynote laptop computer CD Rom problem in Vista
I have a Packard Bell Easynote laptop computer and the CD rom does not recognize my DVD - RW drive, it recognizes and plays all other formats, any ideas how to solve this problem?
Russ
Hello
Close all programs and then put in a DVD - RW blank = what happens?
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.
CD/DVDs have a tolerance + - and may your reading/reading on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.Several good info here:
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014===========================================
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html--------------------
This troubleshooting could not help if there is alignment and/or wear issues however it
a shot.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
One of the results of these two laptops with the same IP address was that the original laptop computer proxy settings have been changed and I could not get into the internet. After you restore the default proxy settings, I again had access to the internet, but two laptops always have the same IP address.
You do not use DHCP to automatically assign different IP addresses?
-
I downloaded iTunes on a new laptop computer and he allowed. All of a sudden, I can't sync my iPhone 6. What can I do?
If your iOS device does not appear in iTunes, try the following:
- Open Control Panel > Device Manager
- Plug in your device
- Locate Bus USB Controllers > Apple Mobile Device USB Driver.
It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB. - Right-click and select software update of the driver...
- Click Browse my computer for driver software
- Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers - Click on let me pick from a list of drivers for devices on my computer
- Click on Apple Mobile Device USB Driver
- Click Next, then close and exit the Device Manager
To step 3 above, open the Device Manager. Expand one of the articles that are listed.
- USB Bus controllers
- Imaging devices
- Portable devices
- Other devices
Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.
Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.
If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the build replacing iTunes for Windows (64-bit-for older video cards) which is sometimes a useful workaround.
Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.
TT2
-
I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?
If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.
As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.
At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it. We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.
-
Laptop computer charger plugged in but not charging
I bought a computer laptop hp pavilion dv6-6154tx laptop computer last month.my, developed a particular problem. When I connect my charger to it, it starts to load, but after a while it stops and the battery icon shows "plugged in, not charging". Then after awhile it again starts.
There is a BIOS update available that is specifically for the intermittent support question. I recommend you to install.
-
Direct print from laptop computer connection
I have a laptop HP with windows 7 32 bit and the designjet 650 c B model with an installed direct jet card, so I a usb converter cable network I want to print from a usb port or from the port of network cable. I just want to know what is called the port that I use? Help, please!
You have a wireless router? I have a Designjet 650 c connected to my router with a LAN cable, can I access the 650 c of my HP laptop wireless via the router.
If you follow this path, you will get an IP address for the Designjet 650 c by selecting Prev in the menu until you get to the entrance, the top menu can go down three times for installing I/O, entry, entry (modular), entrance (network Cfg = >), down Yes, Prev, Prev, Prev, entrance, entry, down arrow twice for utilities Entry, arrow down twice for Config plot, Enter.
That you select the jetdirect card like I/O device, get an IP address from the router and then print a configuration page that displays the IP address to halfway to the bottom of the page.
On laptop computer click Start, devices and printers, do a right-click on the Designjet 650 c, printer, port properties, add a Port, Port TCP/IP Standard, new Port, following, then enter the IP config page printed. For me, it comes to 192.168.1.13. Enter the appropriate value, Next, Finish.
If you do not have a router then consider making an inexpensive wireless router that could be wired to the Designjet and wireless for the laptop. It would probably be a much better solution than to try to make a converter USB - lan.
-
My son uses his laptop computer HP15 home to his office, rarely transporting. He never gave it and a sweet user.
The left hinge seems to be broken / defective, and separates the window. For now, we are all leaving the screen open all the time, but it's a little awkward and the problem is certainly on a laptop less than 2 years old.
Looking at the forum, it looks like a common problem.
We are fans of HP in general, so I hope that this problem can be solved.
Help, please.
-Steve
Hooray!
HP solved the problem free of charge, including shipping in both directions and repair.
It took ten days in total, and we used the laptop without a problem for about 10 days more.
It seems that the hinges for laptop and the display case were entirely replaced, and no data has been lost.
My son is thrilled to have his laptop in return, and to my eyes, HP just went through.
I wouldn't hesitate to buy another HP product, although I confess in the hope that:
(1) HP manufacuring no longer uses defective parts
(2) HP treats everyone with this problem of hinge with the same care
Thank you and HP support HP!
-Steve
-
Satellite A210 - 1 4 - failed to start the laptop computer just orange light
OK, so this is what happened:
While my friend was working on his laptop computer that she had his charger plugged but it did not load. I discovered that the lead from the Charger AC/DC had frayed and should resolidering. After that the laptop was working fine, I looked inside the laptop to check the AC plug connector before I fixed the cable.
I noticed that the WiFi card was broke, so I changed it to a WiFi card in my other laptop used. After back the laptop together and put the battery in, the lights on the front flash blue only and the power light stays orange as if the laptop is in stand-by mode. I can hear the hard drive turns and the CPU heats more CD-ROM drive works, but I can't start that the laptop just sits there with the Orange.
I tried out the CMOS battery, I took out the main battery and just used the AC/DC adapter, but the same thing happens.
ANY IDEAS?
Hello!
I'm not sure, but what happens if you remove the WiFi card you created in? The new card is may be defective or not compatible with the laptop.
You can start without WiFi card?To me, it looks like a hardware problem and your laptop should be checked by a technician of the laptop. Maybe the motherboard needs to be replaced or something else
Good bye
-
cannot print on IPad but will be printed on IPhone and laptop computer HP
Use a HP LazerJet 200 colorMFP M276nw == have wifi wireless system
cannot print on IPad but will be printed on IPhone and laptop computer HP
How can I get the Ipad for printing follow-up after it shows the document sent to the printer?Hi ddavid1,
Welcome to the Forums of HP's Support. I believe that when you send a print job from your iPad to your color Laserjet 200 printer MFP M276nw, it does print ever.
I have included the Apple Mobile Devices (AirPrint): Document Print or is stuck in the print queue document. I know that you are able to print from your iPhone, but please start with a Solution in the document. I have also included the document to print from an Apple device . In the section 'With Apple's AirPrint printing', he has advice on using AirPrint and what it takes.
-
Hello.
I just bought a new laptop of spectrum in the United States.
I need travel in Australia for work. This portable US will be OK when plugged into power in Australia which has a different voltage (assuming I use a plug converter suitable).
Also, do you know if it is possible to use a HP spectrum Australian power adapter so that I don't have to carry around one of these power converters ugly on the end of the plug US?
Thanks in advance.
Hello
First of all I live in a city called Melbourne (Aystralia) right now and my laptop computer loan spectrum is the United States (office of HP in Utah) and Yes, all I need is a tourist adapter as shown above.
Second performance I see no difference, please note: we use 240V in Australia and the charger will be doing the work to convert AC current DC to run the laptop.
I would like to mention here: I've traveled around not less than 20 countries with some laptops (from time to time, not at once) and once again all I need is a universal travel adapter.
Kind regards.
Maybe you are looking for
-
Portege R700 - impossible to pass to Windows 10
I have a Portege r700 with original Windows 7 OEM installation. Windows 7 is updated and program update Windows upgrade me to Windows 10 offer. The upgrade process begins very well, download & pre-configures all the stuff, and then finally ask me to
-
Qosmio F10: processor upgrade is not possible?
I have a Qosmio F10 has a 1.7 ghz processor. Is it possible to update. I'm doing some serious video editing and need at least 3.0 ghz
-
The software version of Q5 blackBerry 10.3.1 1865
Just updated the latest Blackberry software released today after I received a notice on my BB Q5 7903 What a mistake, this version is not as good for me that the previous version, has changed the look of my home screen and apps (hate) any way to elim
-
Create a custom event based on a time range
I'm checking what past events have woken up my pc to sleep for the night. How can I set the custom display only all events between say 22.00 and 07.00 rather than having to go 24 hours every day. Furthermore, if this is not possible, can I just see b
-
Original title: sims 2 Merry Christmas and stuff and christmas party pack Hi I have the sims 2 University of sims 2, sims 2: sims 2 pets, stuff from sims 2 glamour nights. I tried to install the sims 2 festive holiday orders and christmas party pack