HP Laser Jet M1536 MFP: HP Laser Jet M1536 MFP printer
When one or more pages in the feeder supply pages are pulled through and the display shows the status "copy" but no copies are produced. In addition, there is no error displayed on the screen.
Thank you my dear,
Problem solved by the steps you have given below
LaserJet m1536 Nvram Reset.
Note: This sets the printer back to factory settings. You will need to reconfigure the network settings and will need to setup the phone book. [edited by moderator instructions], when the permanent storage init appears on the screen, release the buttons.
Tags: HP Printers
Similar Questions
-
Laser jet 1018 HP printer does not
Original title: Laser jet 1018 HP printer does not
I have a Laser jet HP 1018 and lost the disc printer if I can get any computer to be able to communicate with him. I downloaded the software that I thought I was able to run the printer, but nothing works. What else can I do to get the two to talk so I can print?
Hello
· You get the error message?
· Did you install the printer without any problem drivers?
· Were there recent changes made on the computer before the show?
Step 1:
Follow the form of measures troubleshooting article and check if that helps.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Step 2:
Try to remove old drivers and reinstall the most recent drivers from the HP website and check if it helps.
Find and install printer drivers
HP LaserJet 1018 printer support site about the installation, see also:
http://h10025.www1.HP.com/ewfrf/wc/product?product=1814094&LC=en&cc=us&DLC=en&lang=en&cc=us
-
HP LASER JET 1020 not print even one Page of Test.
HP LASER JET 1020 not print even one Page of Test. Driver is correctly installed and the printer is detected. Operating system is Windows 7 (32 bit).
can someone help to solve the problem?Thank youHP LASER JET 1020 not print even one Page of Test. Driver is correctly installed and the printer is detected. Operating system is Windows 7 (32 bit).
can someone help to solve the problem?Thank you(1) U have tried to reinstall the printer drivers? Try to clean the print cartridge using the hp software installed...
(2) if the problem persists, reinstall the cartiridges...
(3) make surré cartiridges meet ink, the wires are properly pluged in electricity, as well as cable usb to computer, usb messages work
(4) try to refresh service printer spoiler...
Run this file bat using to run as administratorhttps://www.dropbox.com/s/uf1borer6hgce0z/printerspoolser.bat
(5) use HP Print and Scan Doctor (find and fix common problems printer using HP for Windows diagnostic tools)
http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02073861If necessary
Contact hp help and support
http://WWW8.HP.com/us/en/support.htmlContact hp support forum
http://WWW8.HP.com/us/en/supportforums.html -
I use the 64 bit vista ultimate windows edition and am not able to use my canon laser shot LBP-1120 printer because canon just provides a update driver software that supports only 32-bit version of vista. Please can someone help!
Hello
I'm sorry, but Canon are those who write and provision of the drivers for your printer.
It may be time to upgrade your printer.
See you soon.
-
my hp 6500 has more all in an office jet is not printing with magenta and yellow why colors?
my hp 6500 has more all in an office jet is not printing with magenta & yellow why colors?
Well! Wish we knew what caused the problem, but I am very happy, it is corrected! Please post if there are other problems!
-
COMPATIBILITY OF MY OFFICE JET 4500 G510N PRINTER WITH IOS AIRPRINT SOFTWARE WIRELESS
IS MY WIRELES OFFICE JET 4500 G510N PRINTER COMPATIBLE WITH IOS AIRPRINT SOFTWARE IN THE IPAD2
Lol you can use with the application mobile ePrint for iOS devices. You can learn more by following the links below. I hope this helps.
Supported printers the HP ePrint Mobile App or HP ePrint home & Biz:
http://goo.GL/RsNpfHP ePrint Mobile Apps FAQ:
http://goo.GL/33WFq -
I have microsoft scan software and a jet hp6500 office printer, scanner etc. How can I scan to a PDF file?
Hello Jim,
I will suggest 2 things. First, go to hp.com site and select your device from the five listed here (http://www8.hp.com/us/en/support-drivers.html).
Second suggestion is that you use the HP software to scan your document, where the native format is PDF.
Let me know if this helps you.
Kind regards
BearPup
-
How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3. I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1. Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS. Any suggestions, much appreciated.
-
HP LazerJet 200 Color MFP M276: My HP Pro 200 MFP printer is printing a magenta background
My HP Pro 200 MFP printer prints magenta background.
I replaced the ink cartridge and clean the rollers in the printer. It works very well at the moment.
-
HP X476dw MFP: Printer X476dw installation failed
Just bought a HP X476dw MFP printer. I followed the instructions and put it all. I tried to load the software from the CD, but it just says: "Installation failed." I am running OS Yosemite. Can someone clarify what the CD says OS 10.6, Lion, Mountain Lion, and the Mavericks but no mention of Yosemite.
Thank you
Hello
You can install the HP software full functionality to get full functionality, it includes additional features such as scanning software HP, receipt of faxes to your computer or scan from the front panel of the printer.
The latest version of the software can be downloaded from the following link:
Kind regards
Shlomi
-
HP LaserJet 1536dnf Mfp: HP Laserjet 1536dnf MFP - print problem printer
My office has a printer HP LaserJet 1536dnf MFP printer and copy machine and it's only last month a year. This morning the computer was printing and copy fine, then in the middle of a print job 21 page pages begins to show the 4 brands of blackshadow - like on the right side of the page (starting at the top and down to about 4 inches before printing the next black shadow). Sometimes copying and printing. I tried to reset the printer by unplugging the power for 10 minutes. I tried to clean it with cleaning setting. So far, nothing has worked.
Greetings;
If you could post a small picture of the question I might better be able to determine the cause.
Are marks on the page dashes in the media?
Brands repeat down the page in a spaced identical schema?
The issue might have to do with the toner drum, but could be a piece of paper stuck on the fuser unit.
Unlike the intervention of Anonymous_Fan this is not a model of injket and has no heads printing or alignment of the calibrations.
I followed this thread and waiting for your response.
Kind regards
Jaclyn
-
just bought a dell 2335dn MFP printer. I'm trying to run a my network. I get an error message on the printer saying "initialization"?
Seams to me you should seek support from Dell.
Have you installed according to the instructions of Dell or did you just connect to the top and hope? -
HP laserjet m1212nf mfp printer: HP laserjet m1212nf mfp printing issue
Hello world
I have a strange problem with my HP laserjet m1212nf mfp printer after updating to Windows 10 on PC1
Updates are made, tried to reinstall ect.
Now, when I tried to print it says required attantion
But if something is that on PC1 and I decided to print from another pc and any operating system then Quebec on the prints of PC1.
Any idea what could be the problem?
I also ran problem solver and Diagnostics for windows 10 and HP (doctors ' something tool ') cant remember the name
Help, please!
Thanks for the help everyone, I managed to solve the problem.
The soluction (Windows 10)
Uninstalled the printer one again, then when you search for printers I chose that the printer was not on the list (although is has)
Installed by using the IP address of the printer, after that, it will ask if you want to keep the driver or replace by the network (that) printer and success problem printing free driver
In the future no update new printer
-
DRIVER FOR VISTA OR DELL 1600N MFP PRINTER NOT TO "DRIVE" THE FUNCTIONS.
DRIVER FOR VISTA FOR DELL 1600N MFP PRINTER NOT TO "DRIVE" THE FUNCTIONS. MORE SPECIFICALLY: 1) I CAN'T SCAN; 2.) I CAN'T REDUCE THE SIZE OF THE PAGE WHEN I PRINT. (3.) I CAN NOT SEND FAX.
I INSTALLED THE RECOMMENDED DRIVE, BUT IT DOES NOT WORK. MY GUESS IS THAT I NEED TO UPGRADE VISTA TO A SUPERIOR VERSION OR A DOWNGRADE TO XP (WHICH THIS PRINTER WAS WORKING WELL ON).
http://www.google.com.au/search?hl=en&source=HP&q=Dell+Support&Meta=&aq=f&aqi=G10&AQL=&OQ=&gs_rfai=
Dell drivers and downloads.
http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support
Contact Dell printer drivers re OK.
See you soon.
Mick Murphy - Microsoft partner
-
CM1312nfi MFP printing strange colours in plain text documents
My CM1312nfi MFP printer has started printing text wrong color, even on plain text pages. On plain text pages, with the text selected by default is black, it's printing text sort of greenish in about half left of the page and a blackish purple on half right side of the page.
I changed the black toner cartridge, but that did not help.
I ran only a calibration routine, but that did not help or the other.
I run the site Internet HP postscript driver (upd - ps - x 64 - 5.5.0.12834.exe) because the application that I am printing demands. It printed fine with this driver for hundreds of pages, and then all of a sudden he started this thing green and purple.
The system is a HP Pavilion e9260f running windows 7 Home Premium 64-bit.
There has been no recent change in the system of the printer. This seems to be just all of a sudden.
I'm at the end of my mind. Any suggestions? It's time to send it to HP for repairs?
P. S.
The symptoms you describe are related to a physical defect somewhere on the printer. The software should have nothing to do with it.
Your cartridges are brand new HP or handed over to new/completed?
Assuming that your cartridges are new to HP the other element to be considered is the fuser unit. Bad ovens need to be replaced and can be quite spendy. Unless you can find a fault with the cartridges, it is likely that's going to be worth it to replace the printer with a newer model. HP or a certified technician should be able to take care of the repairs for you too if that's what you prefer.
-
where can I find the drivers for my hp laserjet cm2320 mfp printer
I couldn't find a driver for hp color laserjet cm2320 mfp printer. My system is win 7.
I couldn't find a driver for hp color laserjet cm2320 mfp printer. My system is win 7.
-You know what you have for hardware: HP Color LaserJet CM2320 MFP
So... what say you HP?
Hardware support - including the drivers and other software that allow the device to interface with other software and hardware - is the manufacturer of the hardware device.
This printer has been essentially abandoned in newer operating systems HP all in time, it seems...
http://h30434.www3.HP.com/T5/printer-all-in-one-software/CM2320-MFP-has-been-abandoned/TD-p/218486Although it should 'work '...
You can get the drivers and software, you can HP. Select your specific printer if...
Maybe you are looking for
-
Bootcamp installed Windows but not the drivers software.
I use BCA 6.0 on my new MBP (early 2015), that's why I decided to post a new question. I've seen this problem with other people, but if it's 5 BCA it is a simple support, download and install via USB. Windows installs correctly and I can use a select
-
Traditioan DAQ - number of desired output waveform instad
Hello I use traditional DAQ 7.1. I'm trying to see how numbers change as the data have been acquired. However, the VI 'Read' has the waveform. How can I change the numbers? Thank you.
-
Teredo offline: error cannot resolve the server name
After a game online, I found my network with internet connection problems. Troubleshooting said teredo has been disconnected and the error has been omitted to resolve the name of the server. Ive heard contact microsoft is the only way to fix it. Is t
-
Difference between "Home network" and "Business Network" WITHOUT a domain name in Windows 7?
I'm paranoid and always try to choose security options more high. In preparation for the implementation of a small Windows 7 network behind a NAT router wireless and wired, I'm working through "Microsoft Windows 7 in depth" by Cowart and Knittel (wh
-
Trying to figure out from there is a way to change the location of the automatic backup folder after a project has already been created and the location of the automatic backup has been chosen. The reason for this is because we have an active work wi