HP Laserjet Pro P1102w: what you need to know

Similar Questions

• Reset the printer: what you need to know

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  If the printer has already damaged due to her fiddling in the care of the menu, you may need to Contact HP for (paid) service.  Best not to do the damage in the first place...

  An example of the damage that may be caused would be the printers that use special cartridges installation.  Reset the printer to factory conditions can cause sound to demand once again the cartrdiges Installer.  If the original cartridges of configuration have been exhausted or discarded the user must contact HP for cartridges to install since there is no distribution channels.

• HP Laserjet Pro P1102w printer: HP P1102w wireless printer will not pair with a SBG6782-AC Motorola Wireless Cable Modem Gateway

  I already had Internet AT & T U-verse using a Wireless Modem Arris IPDSL NVG510 gateway.  My laptop HP running Windows 8.1 and the HP LasrJet Pro P1102w wireless Prnter systematically and automatically connected to the wireless network NVG510 with no problems over the past two years and the wireless printer works without problem.

  I recently replaced the Internet AT & T U-verse connection a connection of Mbs Comcast Xfinity Intrnet 25, using a Motorola Arris SURFboard SBG6782-AC Wireless Cable Modem Gateway.   My HP under Win 8.1 Pro laptop connects to the network and access to Internet without any problems what-so-ever.  However, the HP LaserJet Pro P1102w wireless printer connects to the wireless network and I can't print at all from my laptop.

  I tried all the suggestions P1102w Wireless Configuration of the printer on the HP printer Support Site, but nothing helped.  I've also updated the firmware of the printer and Loaded the latest driver Installation & full product software.  I tried and re-tried these suggestions over the past two days, but without success.

  I would be very appreciately all help experts in this Forum.  to get the printer working wirelessly, since we also wireless print to this printer of IPads and other wireless laptops.

  Hi @Atmasin,

  I see that you have trouble connecting the printer to the new router. I want to help you.

  I would like to reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Print a Configuration Page.

  If the network name has spaces or special characters, the printer may not recognize it.

  The printer is able to send/receive in the 2.4 ghz band.

  If it is set to 5 GHZ network, you may need to change to 2.4 ghz. (rename the 5 ghz or turn it off)

  The WPA key setting must be on AES to work properly not TKIP.

  Multi flow must be enabled.
  Router firewall must be open for printer ports.
  If you have Mac filtering give you printer hardware to meet the needs of the Configuration page.

  You may need to contact your router company to get help to check these settings.

  Try to run the Configuration Wizard wireless of the HP software to set up the printer on the network.

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• Paper jam false error HP LaserJet Pro P1102w printer

  Hi my HP LaserJet Pro P1102w printer will not print envelopes and labels. I can print documents in the usual way. I can print on the plateau of encelope, but I can't use Word 2003 to print an address.  When I check "what is the impression he's a doc of the envelope and he says Envoy."  The 'Attention' on the printer flashes.  Troubleshooting says it's a problem with the printer.  I ran the auditor of problem of HP and the message I get, is that the problrm is a paper jam. There is no paper jam!

  I would be grateful for any help

  Thank you

  Ron Barker

  Hi @RonBarker ,

  I see that you have problems printing of envelopes. I will definitely do my best to help you.

  The Word software, to change the auto power.

  When the light is flashing on the printer, if you open and close the cover, the printer should resume printing, it acts like a resume button. Given that this model does not have the button. But I've provided the steps to make the changes via the Word software.

  In Word, click on tools, select letters and direct mail/envelopes and labels, box of the envelope will be opened in the envelope tab, enter your address, click Options, click the Printing Options tab, you will need to change the autopower supply, it is probably set to manual. Check the food method to ensure that it is correctly set.

  

  If you need help, let me know.

  Have a great day!
  Thank you.

• LaserJet Pro P1102W: P1102W displays only first page or two of a job

  A week or two ago, my P1102W stopped the complete print job. It would seem that the first page, sometimes two. Would the Green LED flashes quickly rather than the pulse slow (3 seconds) when a work is done. By pressing on the red X button often causes another page to appear but it only works one or two times, after which the rest of the work was lost.

  Hi @Tuttle,

  Welcome to the HP Forums!

  I see that your HP Laserjet Pro P1102w only prints the first page or two of work on Windows 7. I'm happy to help you!

  If please, try the procedure described in this guide, Print Jobs stuck in the queue (Windows)and let me know what happens! (Even if the title of the guide may not correspond to your question, I think that the solutions will help.)

  I hope this works!

  "Please click the Thumbs up icon below to thank me for having responded."

• LaserJet Pro P1102w: P1102w eprint substitute

  Hi gurus, I need help from you.

  A friend gave me a laserJet Pro P1102w printer does not and I fixed. Now, it works well and it's very nice.

  There is Wifi connected and configured for eprint.

  I know he's ready for eprint (retired) to print from the internet.

  I need help to set up because I already tried to add google cloud print, but without success. I need to have chrome open home for printer connected to the "internet" google Cloud print.

  You can add it without having any PC connected to the House?

  Thank you.

  OK, HP have another way to do this.

  https://www.hpconnected.com/UK/en/

  Simply register ther printer in the service, send an email with the file attached and this is!

  Thank you HP, I hope that offers more and amazing and the service in the future!

• HP LaserJet Pro P1102w: HP LaserJet Pro P1102w Windows 10 drivers

  Hello

  Windows 10 is coming and I was wondering that Laserjet Pro P1102w will have 10 windows drivers? The printer is currently connected to the wireless network.

  -Marko-

  Hi Dylan & Markom80,

  as sabertooth04 pointed out, goto HP.com and plug-in here the name of your printer to find your product and the software driver; You should see a Windows 10 listing of the printer.

  The key here (as in the software updates) is to use the latest version of the software from hp.com and avoid using the original shipped with the printer CD.

  Good luck

• HP LaserJet Pro P1102w: HP LaserJet Pro P1102w Wireless Installation - adding other laptops and desktop PC...

  Hello

  I have a question about computers adding more to my HP printer.

  I followed the instructions & so I can print wireless from laptop, I used during the installation (after removing the USB cable).

  I can also print wireless from our various iPads & iPhones (after the change of the printer WiFi).

  But I don't see how I can 'Add' laptop (Windows Vista) daughter & my main desktop computers (Windows XP), so they can print wireless too!

  Does anyone know how to do this?

  I tried to launch the installation of the drive on my laptop HP printer girls. He was able to recognize the printer, but was unfortunately unable to print.

  For any help or suggestion would be appreciated.

  Thank you very much

  Simon B.

  Hi & thanks,

  I also found a solution to install my printer HP LaserJet Pro P1102w wireless & connecting then 2nd, 3rd & subsequent laptop/desktop computers.

  I initially reset the printer to remove any configuration, then I did the following:-

  Install on a laptop using a CD or could start simply by connecting the USB cable to the laptop. Follow the instructions, test the characters etc. (to prove that the wireless network is configured correctly)).

  Check printing wireless since this laptop computer 1 initial works, & also works various iPad/iPhone etc.

  Problems have been met when try to get other laptops/workstations to print wireless (2nd & later).

  The following seemed to work: -.

  On the other portable computers desktop (do not plug printer with USB cable): -.

  (1) the installation of the CD,

  (2) choose the series w1100 - Wireless install,

  (3) choose to install the printer software (& display the Guide of the user if want),

  4) click Add another printer (option 1).

  (5) choose HP LJ P1100w Pro Series.

  (6) choose option 3 (to connect to a network configured wireless (that established earlier),

  (7) following, a lot of software is installed,

  (8) identify the printer by choosing the method to identify it (select in a list),

  (9) side of firewall pinhole (all).

  (10) looking for printer, concludes HP LJ Pro P1102w,

  (11) then the TCP/IP data has been: -.
  IP 192.168.2.46
  Subnet 255.255.255.0
  Gateway 192.168.2.1

  Host Name NPI1C754F

  (12) (stupid 'password required' kept appearing several times - X box to close),

  (13) to enable direct printing,

  (14) then,

  Finally success!  A test prints to computers/idevices like many that I could find.

  Thank you very much. I hope the above can help someone else!

• Unboxing and configure the HP LaserJet Pro P1102W printer

  Learn how to perform a unboxing conversion and configure the HP LaserJet Pro P1102W printer.

  For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.

  This video was produced by HP.

  I hope you find this useful and informative video.

• I don't know what iphone I.  I have 3 'old' and you need to know where to go to understand who is who.

  I have 3 older iphones and that you need to know exactly what they are.  How and where can I do this?

  Denise

  I need to know if its iphone 4, 5, s

• HP LaserJet Pro P1102w price?

  I'm shopping for a printer, and the price is a lot to do with my purchase of the product. (HP LaserJet Pro P1102w)

  Thanks, Jaysways
  
  

  http://lmgtfy.com/?q=how+much+is+a+HP+LaserJet+Pro+P1102w>

  http://www.bing.com/search?q=how+much+is+a+HP+LaserJet+Pro+P1102w&go=>

  SC Tom

• What I need to know is the name and location of the executable that runs when you click on detect monitors in the menu screen resolution of windows 7?

  Original title: name/location of the executable that runs when you click on detect monitors?

  What I need to know is the name and location of the executable that runs when you click on detect monitors in the menu screen resolution of windows 7?

  Hello

  Your question is better suited in the MSDN forums. Please post your question in the MSDN forums.

  You can follow the link to your question:
  http://social.msdn.Microsoft.com/forums/en-us/categories/

  It will be useful.

• I have my ket produced for pro 11 you need to know how to install

  have my ket produced for pro 11 you need to know how to install

  Hello

  Please see Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Hope that helps!

  Kind regards

  Sheena

• whenever I try to download a program that I tells me that windows can't open this file and I can not install nething or what did I do or what I need to know

  whenever I try to download a program that I tells me that windows can't open this file and I can not install nething or what did I do or what I need to know

  Hello
   
  1. What you're trying to download?
  2. What program you try to open when this occurs?
  3. What happens when you try to install the program?
  ReferThe link and follow the steps.
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• HP laserjet pro p1102w: hp laserjet pro p1102w does not work on windows 10 - printer needs attention

  I installed Windows 10 on my HP PavilionX2 about two weeks ago and after a lot of false starts but I finally going.  I set up my printer HP Laserjet Pro 1102w associated with the installation of HP application and got new drivers, etc.  The installation was successful.  When I tried to print.  I received the message that my printer requires attention. I use generic cartridges, which seems to be contributing to the problem.  However, I discovered that the printer would be finally print everything I sent him a few hours later.  So, every time I want to print I just ignore the message about needing to care, but I have to wait several hours before Windows 10 finally released the document for printing. I have no problems whether in point 8.1 of Windows.  It is new with Windows 10.

  My printer works on three of my Windows 7 computers and on three of my computers windows 8.1 and on my iPad, so there is no truth to the message that the printer requires attention.  The printer works fine, but it does not work in Windows 10.  Microsoft Community is no help.  I reinstalled the drivers at least three times using the HP Setup utility. It was worthless.

  Is it possible to fix this?

  Hi @technickel5,

  I see that you are having problems printing just the Windows 10 computer, the print job prints a few hours later after sending it. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I would cycle power to the router, restart the computer and the printer to see if it will help.

  It can be assigned to the printer port. Devices and printers, right click on the printer and left click on printer properties, select the Ports tab and see if the printer is checked on TCP/IP and no WSD. Let me know how it is listed.

  Download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

  Here is a list that the PSDR check on the computer.

  

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If there is anything else I can help you, let me know. Thank you.