HP Laserprinter 1012 Windows 8.0 or 8.1-compatible

I am currently using a Laserjet 1012 on the windows XP desktop.  purchase of a new computer, with windows 8.0/8.1.

It will work with the new computer print?  I have a disc that came with the printer.

Appreciate your help... help site seems to have two different answers... it is supported and it is not supported.

Hello

I fear that the printer is not taken in charge as you can find listed for the specific model below:

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/learnUseDisplay/?sp4ts.oid=377934&spf_p.tpst=psiContentDisplay&spf_p.prp_psiContentDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03450061-12%257CdocLocale%253Den_US&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

If you've seen the various information, could you please provide the specific URL?

It lists the name of the specific printer?

Tags: HP Printers

Similar Questions

  • What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

    I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

    You left out which version of DirectX has been shown.

    As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

    I met the following, but it shouldn't apply to Powerpoint:

    Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

    I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

    Intel graphics Forum: http://communities.intel.com/community/tech/graphics
    Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

    Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

    Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

    Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
    It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

  • Windows 7. My monitor is compatible with Windows 7?

    My monitor is compatible with Windows 7

    I have a LG W1934C-pf monitor, and it worked perfectly with XP but not Windows 7. My monitor is compatible with Windows 7. I tried to update the driver for the monitor and a knowledge of cause I already install the correct driver.

    C 1943 - Terry PF.

    At the end of the day - this monitor is compatible with just about every player to computer, Tablet, DVD, Bluray player/camera photo/phone/etc you can find an adapter to allow you to communicate with her.  No drivers are required to display the image.

      
    It boils down to whether or not you will be able to display in a resolution you want / desire or is a native of (appropriate) for the monitor in question.

      
    This is the video device in the computer itself which requires the pilot in your case, and the age of the device in your computer is such that to find a driver for Windows 7 - unlikely.  :-)
  • Windows 8 seems not to be compatible with polar WebSync.

    * - Original title - program programs application Applications compatibility

    My Windows 8 seems not to be compatible with my Polar WebSync.  Is there another experience with this issue?

    Host family

    Hello

    1. what exactly is the problem you are having with this program?

    2. don't you make changes to the computer before this problem?

    According to the Polar WebSync Internet site, this software is compatible with Windows 8. Click here for more information: http://www.polar.com/en/support/downloads/Polar_WebSync_Software

    According to the compatibility Windows 8 Center, this program is compatible with Windows 8. Click here to know more: http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Polar%2BWebSync&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

    Additional information.

    Polar contact: http://www.polar.com/us-en/support/contact_us/email_polar

    Response with the State of the question and we will be happy to offer you our help.

  • How to connect HP Laserjet 1012 Windows 7?

    I'm trying to connect my HP Laserjet 1012 to my new Lenovo laptop with Windows 7 computer, but
    It will not load the required program from the original program disk HP Laserjet.  What
    Do I connect the printer to my laptop?

    I'm trying to connect my HP Laserjet 1012 to my new Lenovo laptop with Windows 7 computer, but
    It will not load the required program from the original program disk HP Laserjet.  What
    Do I connect the printer to my laptop?

    The 'necessary' program is a pilot. And a Windows 7 pilot certainly isn't on the original HP disk, because Windows 7 did not exist when the first HP 1012 is out.

    Apparently there is no Windows 7 driver for this printer and You ' r eout of chance. Here is my standard message on this topic:

    Whenever you switch to a new version of Windows, you must install the drivers (software that interfaces between the hardware and Windows) for printers, scanners, video cards, etc., that have been written for this new version of Windows.  And also note that you need different drivers for a 32-bit version of Windows and a 64-bit version.

    It is the manufacturer of the hardware to write and make available to download these drivers. Especially if your hardware is older, it can be good the manufacturer has decided that it is not worth his time and effort to develop drivers for the hardware it sells is no longer.

    Check with the manufacturer or on their web site to see if there is a pilot. If not, you're out of luck. Also consult their websites in other countries, if there is any; Sometimes you can find the driver you need in this way.

    In the future, before you make such update or buy a new computer with a new version of Windows, make sure that you have done the appropriate research to find out what drivers do not exist, and therefore what equipment you need to replace if you upgrade.

  • I have 10 Windows and Firefox STILL is not compatible

    Adobe constantly hangs using Firefox with my upgrade of Windows 10 - I know, it is a question, but I'm still having this problem - I have the latest version of firefox and Adobe - it's very frustrating because I was very happy with Firefox

    If you have any problems with the current versions of Shockwave Flash plugin then check this:

    • see if there are updates for your graphics card disk drivers

    https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

    • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)

    https://forums.Adobe.com/message/4468493#TemporaryWorkaround

    • turn off hardware acceleration in the Flash plugin

    https://forums.Adobe.com/thread/891337
    See also:

  • FIREFOX 8.O GUARD LOCK, I AM RUNNING WINDOWS XP, WHICH IS THE LAST COMPATIBLE VERSION

    Thank you for making this as painless as possible. Since I upgraded to 8.0, firefox has been lock up REGULARLY. I wonder if there is a problem of compatibility with Windows XP, and if yes, what is the latest version for use with XP and how to do it.

    MizLiz, thanks for the suggestion. I followed your advice and have not had the problem since. Sorry it took so long to answer. Hope that Mozilla developers to read these messages from time to time; of course, they are not alone, I think that IE is even worse.

  • Apple v/s Windows. Question on making it compatible DVD.

    I have the MacBook Pro. Can I download Windows Media Components for QuickTime, but what I really need to do is download a 'movie maker' to create DVDs from my existing files/videos etc that we don't w/Apple products to display on any (most) DVD reader/s. make sense? If I still had a Windows PC it would not be a problem. I don't like windows, just not PC/Laptops that are associated with. If more information is needed please let me know.

    Thank you for all your comments.
    -Be able to do something that someone else says I can't love.

    Hello

    Contact Lion of MAC Support for assistance.

    http://www.Apple.com/support/lion/

    Hope this information helps.

  • Age of Empires II: The Age of Kings will not work on Windows 7, says I'm not compatible with DirectDraw.

    I played AoE II forever, but for the last six months have not been able to play on my Toshiba laptop that is running Windows 7.  Any other information required I can give you if you ask.

    My system meets the minimum requirements

    Compatibility mode does not work for any earlier version of Windows selected.

    I updated DirectX in all possible ways.

    I downloaded the patch aoe2.

    The game still does not work.

    Now, I know very little of video cards, but I know that my father has the same laptop and the game runs very well on her.

    I tried to open it with 256 colours and 800 x 600 resolution

    I tried to disable my graphics card and got the same message.

    DirectX says that DirectDraw is activated.

    It should be out once (I don't know how or why) I had the game starts.  about six months and I did nothing different from normal.  It has not started again since. But it means that I know that it is able to work on this machine.

    Also, I never had this error until recently; before it would just go to a black screen until I ctl + alt + delete my way out of it.

    I am begging you people at Microsoft to figure this out for me, to find a way to get rid of this error message...

    Hi the Gun22,

    1 did you install the updated drivers for the graphics card on the computer?

    2. What is the version of DirectX that is installed on the computer?

    3. What is the full error message that you receive?

    Method 1

    See the below Microsoft article and try the steps mentioned, check if it helps.

    DirectDraw or Direct3D

    http://support.Microsoft.com/kb/191660

    Method 2

    Download and install the updates that are available on the game website.

    http://www.Microsoft.com/games/AGE2/downloads.htm#updates

    The problems of the game performance

    http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

    Known graphics issues in Age of Empires II

    http://support.Microsoft.com/kb/830651

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Playback of Windows Movie Maker/XP on DLNA compatible TV.

    Hiya!

    I was wondering if anyone can tell me how to play a movie it on WMM to my DLNA compatible TV.  I have Verizon Fios.

    your TV supports Play To?

    http://digitalmediaphile.com/index.php/2009/07/24/Windows-7-play-to-and-a-Samsung-DLNA-enabled-TV/

    If this isn't the case, you can browse the network on your TV?

    We need more information from you. make and model of TV, etc if network configuration
    the TV doesn't 'see' the computer.

    Saturday, August 7, 2010, 17:06:27 + 0000, Trulyteresa wrote:

    Hiya!

    I was wondering if anyone can tell me how to play a movie it on WMM to my DLNA compatible TV.  I have Verizon Fios.

    Barb Bowman

    http://www.digitalmediaphile.com

  • Im trying to install the Nvidia drivers for my new video card and its saying that my operating system (windows vista 64-bit) is not compatible, which means they are 32-bit drivers, it's fake.

    Im trying to install drivers for a Nvidia Geforce GTX 260 on my windows vista 64 bit computer. Every time I have try and start the download, it is said that my driver is not a 64-bit driver, which is false, and that my system is 64 bit, which is true. SO... after I click 'OK', it begins to download only to have another pop-up saying "Setup has detected that the system in use is not windows vista 64 bit" which it is. Basically its contradiction with himself. im confused.

    Im running windows vista 64-bit.

    I just upgraded to a Nvidia 9800GT, to a Nvidia GTX 260.

    In frustration, I deleted all the old drivers, but the new will not download.

    The first error says that the drivers are not 64-bit.

    The second error indicates the operating system is not 64-bit.

    Let the site nVidia Driver detect your video card. If it still does not work, contact nVidia for a solution... Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

  • Upgrade Vista to Windows 7, radeon hd 3650 not compatible

    I have Dell Studio 1735. Run the Windows 7 Upgrade Advisor says it is not compatible with Windows 7.

    Isn't it?

    A possible solution could there be for me to upgrade?

    Hello

    It's a laptop with integrated graphics

    You run the Upgrade Advisor, and it comes back as no Windows 7 Compatibile.

    Here are some tips given to the posters who want to switch to Windows 7.

    If your laptop does not meet the requirements and you can not solve the problems, you're wasting your time.

    Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

    If this is not available, Windows 7 will not properly work for you.

    Run the "Windows 7 Upgrade Advisor.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

    Check if your specifications are compatible for Windows 7:

    "Windows 7 system requirements"

    http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

    "Windows 7 Compatibility Center" for software and hardware:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Windows 7 upgrade paths:

    http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

    «Installation and reinstallation of Windows 7»

    http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

    See you soon.

  • Receive error message: Windows 7 installation disc is not compatible with your version of Windows.

    I bought windows 7 from the College Bookstore, and I can't install it - why this

    He says that the installation disc is not compatiable with your version of windows. to upgrade, you need the correct installation disc

    Hello

    You don't say what you are upgrading.

    Please read this information.

    Windows 7 upgrade paths:

    http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

    Once you have read the foregoing regarding the upgrade paths, please also read this.

    Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

    If this is not available, Windows 7 will not properly work for you.

    Run the "Windows 7 Upgrade Advisor.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

    Check if your specifications are compatible for Windows 7:

    "Windows 7 system requirements"

    http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

    "Windows 7 Compatibility Center" for software and hardware:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    See you soon.

  • Windows vista home edition premium is compatible with the kodak zd15 camera

    PC won't let me download videos from my zd15 camera sd memory card.  He's going to upload pictures, but not videos. Kodak claims that they are not compatible.  gave me a site to ask for help and wanted to bill me.

    Here's a way to accomplish the task...

    Apparently, you have an external or internal USB media player?

    Insert the memory card into the correct location on the media player...
    If open windows... Close them.

    When the card is inserted... If you go to... Start / computer... is
    player card on one or several removable disks?

    Removable (e :)) drive
    Removable disk (e :))
    Removable drive (g)

    If_Yes_you can download the files from here. Left click
    the drive letter that corresponds to the SD card slot should
    display the directory of the card and you can copy and paste or
    Drag and drop the files of your choice in a folder on your hard drive
    drive.

    Just click with the right button on a group of selected files and choose... Copy...
    then navigate to the folder that you want, and then right-click the
    folder and choose Paste.

  • Windows Live Essentials 2011 is not compatible with Vista!

    For several months, I tried to download this updated stupid, but for some reason any, that I don't understand, Windows Live Essentials 2011 will not download to my computer that runs on Windows Vista 32-bit.  My anti-virus software is Norton and doesn't seem to block any downloads software whatsoever, unless he invites me to block first.  I tried to download it from my Windows Update, I tried to download official Microsoft Web site and I even tried a download offline on one of the links posted here, but it will not download.  If anyone can help me, I would appreciate it.

    Off-topic: can someone explain to me that, since Internet Explorer 9 download (I have since managed to get rid of and fortunately returned to IE8), why main my taskbar and windows icons disappear and not return when I leave my PC slowed down!

    Windows Live Essentials 2011 (QFE1) is entirely compatilble - with Vista SP2 (only).

    You will find support in this forum ONLY for the installation/uninstall/upgrade to update / upgrade to Windows Live Essentials 2011: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

Maybe you are looking for

  • Watch OS 3.0 update will not send notifications of message

    I recently installed watch OS 3.0 and iOS10.  I don't get notifications on the watch.  I have checked all the notifications settings, restarted the two devices and even if not matched / repair my watch and nothing works.  Any ideas?

  • want to dounload

    How possible

  • Has anyone noticed a disturbing sound on laptop M40-101

    I bought a portable M40-101 on the 23.06.2005 in Istanbul and noticed a noise coming from the left speaker to the round up and sent to the service.It has been 22 days and again, there is no news. The service that I have been informed that there is a

  • Interpolation

    Edge detection that VI has the interpolation is mentioned. I want to know the types of interpolation and how it will work. If anyone knows please explain.

  • Multi-parametric non linear multi-courbe made how to?

    (xpost: http://lavag.org/topic/11870-multiparameter-nonlinear-multi-curve-fit/) There is a model of a physical process formalised in LabVIEW simulation toolkit. It take a set of parameters and product of the dependencies of the observable time. I hav