Has anyone noticed a disturbing sound on laptop M40-101

I bought a portable M40-101 on the 23.06.2005 in Istanbul and noticed a noise coming from the left speaker to the round up and sent to the service.
It has been 22 days and again, there is no news. The service that I have been informed that there is a problem with the motherboard and must be replaced.
What I would ask is that is it possible to request a new laptop instead of a repair?
Because I had the same problem when I bought the laptop.
This means that I bought a defective product from the how.* *.

Hello

If you have written on some sort of novice cracking that can be heard each time a windows sound system played, this is known issue and can be resolved on the easy way. In the control panel go to properties of SoundMAX. Under power management settings choose no power savings options.

After that, the cracking noise will disappear.

Good bye

Tags: Toshiba

Similar Questions

  • Sound on laptop is uninstalled?

    I don't know how it happened but I turned on my laptop a few weeks ago and I noticed that the sound was no longer working. It's weird because he was always working. He said that everything works correctly, except when I try to go to the Volume control. It gives me this message. http://i38.Tinypic.com/125knt4.jpg

    I did what he said, the problem still exists. I don't know what I should do.

    Hello NMB54,

    Thank you for your message.  We will check your audio driver.  Please follow these steps:
    1. click on 'Start' > right click on 'My computer' > select 'manage '.
    "2 click on Device Manager.
    3. in the right pane, click the (+) sign next to "Sound, Video Game..."
    4. underneath, you will find the brand/model/name of your audio card/adapter?
    5. you will need to go to the site of the manufacturer and download/install the latest driver for your audio device.
    Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Has anyone invented a way to get the emails that went to the wrong email address until the wrong person reads?

    Has anyone invented a way to get the emails that went to the wrong email address until the wrong person reads?

    To answer your question, you have to assume that once you have sent the email that it cannot be recovered. Think of it as dropping an old letter in a message box - you can't get it back once it is in the message box.

    The reasons are not only technological - it security, privacy, legal and political might be too (e-mail can cross multiple international borders).

    One hand practice also, what you want would be difficult because the emails will usually quickly reach their destination server and so can be collected by the recipient of email from this server as soon as sound here.

    By ensuring that you are writing your emails correctly in first place is the best.

  • Has anyone tried a 8GB SODIMM in DV6ZSE?

    I have a HP DV6ZSE (3200 DV6Z CTO Select Edition) - map mother AMD M880 G, PhenomII x 2 cpu.  Even though I know that the original specifications list 8GB (4GBx2) as the ram max, the material must be able to run the 16 GB (8GBx2).  I don't know if the BIOS will allow this, however.

    Has anyone tried one or two sticks 8 GB in this motherboard?  I am currently using BIOS F28.

    Before ask you, I am a heavy user of Photoshop and Lightroom and know that I can use close to the 16 GB that I have on my desk when you work on HDR or panoramic using several large RAW files and layers.

    Since I don't have all the answers from anyone who has actually tried 8 GB sticks in this type of Mo, I decided to try it myself.  I bought a kit dual channel:

    CORSAIR 16 GB (2 x 8G) 204-pin DDR3 SO-DIMM DDR3 1333 computer laptop memory model CMSO16GX3M2A1333C9

    and it turns out it works.  A small "bug" is that the BIOS displays only 4 digits of the size of the memory, displaying "6384MB" instead of "16384 MB", but all the 16 GB are recognized and used.

  • Has anyone lost their 4G with the update?

    I have an iPhone with T-Mobile 5. I have updated to iOS 10.0.1 slightly more 2 weeks ago (Wednesday, 14 September). I had zero problems with the update until 2 days ago (Wednesday, 28 September). Since two days ago, I don't have 4 G service. It works now only EDGE. For T-Mobile users not, EDGE is the network used when 4G isn't available (similar to 1 x the Sprint). It basically lets you helpless with the data if you are not able to be on wifi. Page load times are like being in 2005. Too slow for the cards to work, checking e-mail takes several minutes, etc.

    I tried to reset network settings, update the carrier settings, turning the phone on & off, turning 'Activate LTE' turn off, but also to talk with the service the customer. T-Mobile says I'm connected to all the right tricks for 4 G and does not know why I don't get 4 g. I also tried updating to 10.0.2 yesterday evening hoping that there was a difficulty with it, but it was not. Has anyone else had this problem in the last days (with or without T-Mobile)? It worked fine for the first 2 weeks of the update.

    Maybe (or maybe not) related to the following: http://www.macrumors.com/2016/09/29/verizon-iphone-7-connectivity-problems/

  • Has anyone else received (20 +) identical updates Digital Camera RAW Compatibility Update 6.20?

    Has anyone else received DAILY (20 +) identical updates Digital Camera RAW Compatibility Update 6.20?

    This can occur, run a maintenance program that erases your system cache and things should be fine.

    Also, check and make sure that it actually settle.

    Check the console to confirm that things work well.

  • Has anyone ever used CleanmyMac3?

    Has anyone ever used the product Clean my Mac 3?

    It's the shit. Avoid at all costs.

  • Has anyone installed Ubuntu netbook remix 9.04

    Last weekend, I downloaded and installed the beta version of UNR 9.04 on a USB key. Had a quick play with it on the Toshiba and it seemed to work OK in addition to being unable to scroll with the touchpad, I think it's related to this bug https://bugs.launchpad.net/bugs/315882.

    I wanted to install the new version until I was happy that everything would work OK. Has anyone tried to install 9.04?

    Hello

    I didn't test a new version 9.04 but why you n t try just the newest pilot of the synaptic touchpad
    I mean its worth to try an I doubt a new version of the touchpad driver would cause serious problems
    So it of certainly worth a try

  • Has anyone got the upgrade of GPU for H8-1234 with motherboard HP M3970AM HP (Angelica2)?

    I improved my diet for a Corsair CX series CX500M 500W ATX 80 Plus Bronze modular power supply 12V successfully and I want to assure you that I have buy a compatible GPU for the motherboard.

    If I go to http://www.pc-specs.com/mobo/HP/HP_M3970AM-HP (Angelica2) _ / 2042 and click on compatible GPU it lists AMD and Nvidia cards.

    The series of HD AMD goes up to the HD6000 series and does not list any HD 7000 series.

    The only Nvidia 600 series which is decent is the GeForce GTX-660-670-680 or 690.

    The site also shows (these graphics cards have an appropriate interface to work with and integrate into the HP M3970AM - (Angelica2). Because this motherboard does not have a GPU chip on board, we have also limited GPU integrated only to those which are integrated to die of a CPU.)

    Cards GTX listed are all much more expensive than 650 Ti DirectCU OC Boost 1085 MHZ 2 GHz 6.0 GB GDDR5 2xDVI card PCI-E HDMI DP that is not listed or even GTX550 TI, which is not listed

    The Amd HD listed series cards are unavailable or more expensive than most of the HD 7000 series.

    Has anyone successfully installed a card $ 100 from low to medium priced which is a significant improvement on the hd 7450? If you could please let me know what graphics card you purchaced.

    Thank you

    Gbrown13, welcome to the forum.

    The limiting factor for the video card upgrade is the power supply unit (PSU).  It is 300W.  Intermediate level maps latest require at least 400W to work properly.  7450 HD comes with the computer has been designed for HP operate with OEM PSU.  A detail 7450 HD very probably would not work.  In addition, you should limit the length of the video card to no more than 9 ".  This ensures that it fits in the space provided.  The majority of the double cards are 1.5 "wide.  These are normally without any problems.

    I hesitate to recommend a video card on the grounds that it will be much better than an existing map.  It is difficult to say that this is the case.  Here is a map which might work for you, with an upgrade of the power supply.  Read the reviews to see what users have to say about it.

    If your problem is solved, please click "accept as a Solution.

  • Re: Satellite L300-1 has 8 - SATA and driver sound

    I had to go SATA AHCI on compatible, because I wanted to install Windows XP on my L300. Is it possible to install the SATA driver under existing operating system?

    And one more problem. I can't install the audio driver.
    Installation goes ok, but after restart there is has no audio or even sound card installed in the Device Manager and it is still by the PCI device.

    Need help ASAP

    Sorry, there is no way to install the SATA driver on an existing operating system.

    You have two options.
    1. you reinstall Windows XP SATA driver. First go into the BIOS and choose AHCI SATA mode. Then, you can start the installation, but after booting from the CD, press F6 to load the SATA driver.
    2. you made on the operating system. This isn't a problem, but you have lost performance a bit.

    It's on you ;) you do

    Have you downloaded the audio driver directly from the Web from Toshiba site? Select this check box.
    And have you used Windows XP with SP2?

  • My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

    My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

    Don't know what you mean by vertically but it is normal that the  watch to display the time briefly when removed from the charger. If the  Watch is held horizontally with the number key of Crown and side on top can be turned. This is normal and is the point of view of bedside table.

  • Has anyone studied the watchdog error violation... This error is associated with scanseven antivirus offline

    Has anyone studied the watchdog error violation... This error is related to scanseven antivirus offline. Antivirus tool mode and does not work in real time. Partners offering antivirus are notcomprehensive in this type of antivirus.

    We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.


    Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

    If you have any questions regarding the procedure, please ask

  • Has anyone tried using the cw3dgraph in WPF?

    Has anyone tried to use the CW3DGraph with a WPF project? I guess you need a WIndowsFormHost? If yes I do not know how you would connect into it. I control in my project reference but I don't know how I would refer to it on a window.

    Hello

    The CW3DGraph is an ActiveX control. This article on MSDN provides steps on how to host a custom ActiveX on WPF: MSDN Walkthrough: hosting an ActiveX control in WPF

    The procedure step by step uses Windows Media Player for example, but it still serves as a useful reference.

    Hope this helps,

  • has anyone had any strange phone calls claiming to be from Microsoft? Phone number: 007277489117

    Has anyone had any strange phone calls claiming to be from Microsoft? Phone number when you dial 1471 is: 007277489117

    Hello

    Calls unrequested telephone of this nature are almost always a common scam. Do not let them give any info, do not give access to your PC, not give them all the money and do not go to all the websites that they suggest. One moment.

    Please see:

    http://www.Microsoft.com/en-GB/security/online-privacy/avoid-phone-scams.aspx

    Microsoft issues never not solicited for phone calls of support or security.

    These types of callers can use completely fictitious names or bogusly claim to be of real companies other than Microsoft as well.

  • Has anyone used HP200LX (or HP100LX) Cpack software on a PC VAIO VGN-P11Z/Q?

    Has anyone used HP200LX (or HP100LX) Cpack software on a PC VAIO VGN-P11Z/Q?

    I've been using Cpack of HP100lx under Win XP software without problem on several stand-alone for a long time; However, I tried to run on a Vaio VGN-P11Z/Q under Win XP without success: the screen out blacks or give me the fatal blue screen of windows.  (I also tried the hp200Lx top of sama obtaining Cpack software bad results). I wonder if someone could help me solve this problem. Thank you.  Summary of the specification of the VAIO VGN-P11Z/Q:

    • Processor Intel Atom Z520 (1.33 GHz, 512 KB L2 cache)
    • Intel SCH US15W chipset with Mobile Intel GMA 500 graphics
    • 2 GB 533 MHz DDR2-SDRAM
    • X-black LED backlit 8 inches (native resolution of 1,600 x 768)
    • Hard disk of 60 GB ATA/100 4 200 RPM
    • Two USB 2.0 ports, a headphone jack 3.5 mm and a port replicator connector (for Gigabit Ethernet/VGA)
    • Integrated HSDPA (7.2Mbps) and 802.11b/g/Draft-n
    • Bluetooth 2.1 + EDR
    • Stereo speakers and built-in microphone
    • 0.3 megapixel webcam
    • Memory Stick and SD card slots.
    • Running Windows XP

    Hello

    Please follow the instructions in the link below.

    http://support.Microsoft.com/kb/827663

Maybe you are looking for