HP link Setup requires an account on the remote computer, how do you do that?

Similar Questions

• When you apply for jobs, the police don't rest not the same thing, how can you correct that if the application is done correctly?

  I'm filling out a job application.  The police are everywhere, it changes in different areas and I don't know how to fix it.  How is that possible?

  Press Ctrl + E. If it allows you to change the font settings, do so. If this isn't the case, then there is nothing you can do about it with the player. It's the fault of the authors of the file. You can report it to their...

• can I reset an administrator password with a reset disk created on a standard account on the same computer?

  I forgot my password to administrstor. I have a reset disk, but it was created under the standard account on the same computer and for some reason that I have problems to use it to reset the administrator password. I am able to do?

  No, the password reset disks only helps with the account, they were made on [otherwise any user could reset the admin password & enter this account].

  There are some things you can try in the PDF Password Reset Disk step by step Guide to http://www.itknowledge24.com/ but you may not be able to solve the problem without reinstall Windows & lose the current contents of the disc.

• "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  Hello

  I received the following error message

  "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  This happens when I try to log on my remote on the icon access log, I put on my computer at home so that I can get to work if I need to.  He worked for a few months after I bought my new laptop and software, but now suddenly it doesn't.  I talked to my guy TI in the work and they seem to think it's a common problem with "Vista Home Premium", I can do to change it so that I can use the remote access icon?

  Thanks in advance

  Hello
   
  Licensing protocol handles the communication of information on licenses between your computer and the remote computer. If there is an error in the licensing protocol, your computer may not be connected to the remote computer.
   
  To resolve this problem, restart the computer and try connecting to the remote computer. If you continue to receive this error message, contact the server administrator.
   
  This also occurs if one of the registry entries is corrupt. Try the following steps to resolve this problem.
  1. Click Start, type regedit and press to enter.
  2. on the window of the registry editor, navigate to Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\MSLicensing
  3. right click MSLicensing, click on export and provide a file name for example RemoteKeyBackup and click on save to the desktop.
  4. right click on the HardwareID key and store under MSLicensing folder and click on delete.
  5 restart the computer for changes to take effect. Restarting the computer will create new keys.
   
  NOTE: If the problem persists, then you can take backup of the MSLicensing registry key and to load it on the computer of the problem, this will fix the problem.
   
  Visit this link for more information:
  http://TechNet.Microsoft.com/en-us/library/cc756826 (WS.10) .aspx
   
  Important: Incorrectly editing the registry can cause serious problems on the computer.
  Back up the registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry
   
  Try the steps and check the result.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• How to connect to the remote computer

  Original title: how to goto the program installation and connection to the remote computer.

  Only school in priperly IAM.

  Hello

  Thanks for posting the request in Microsoft Community Forum.

  Please answer the question that helps us provide a better solution.

  What exactly are you trying to do?

  If you try to connect to the remote computer or if you allow someone to connect to your computer, visit the following links and check:

  Connect to another computer using Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-another-computer-using-Remote-Desktop-connection

  Allows a user to connect to your computer using Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/allow-someone-to-connect-to-your-computer-using-Remote-Desktop-connection

  Hope this information helps. Please feel free to respond if you have any other questions, we would be happy to help.

• Connection to the remote computer problems

  Have XP Pro on work and home computers. Monitoring the windows XP start using remote desktop info. Computer work defined as host, trying to connect remote, after putting in the name of the computer to work, I get "unknown parameter was specified in the computer name field.  How can I connect to my work computer?

  Hi Raider2118,

  · What is the work computer protected by password?

  · Is the work computer have to plan together?

  When you connect to another computer using Remote Desktop connection when you specify ComputerName/console in the computer box, and then you click Connect note ComputerName is the name of the remote computer to which you want to connect.

  To get the name of the computer navigate to the location below:

  a. Click Start, right click my computer

  b. click Properties

  c. Select the computer name tab

  If you have tried the steps above and then temporarily disable the security software on the computer and then try to connect to the computer and check the results.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 on Vmware discovers 'the connection to the remote computer has ended. "

  Hello world

  I have problems connecting with VMware view
  I installed windows 7 and tested fine. But Windows8 x 64 is not allowed.

  The virtual machine is available on the server of the view state. pls see attached snapshot. When I try to connect to via the customer discovers my session disconnects after a few seconds with a warning "the end of the connection to the remote computer.

  When I check the console vcenter process, it seems that the user connects with no problems. But customer does not display anything and disconnects.

  what I've done so far:
  -Tried both RDP and PcOIP connections
  -Removed and reinstalled the client
  -Remove the agent from the view and reinstall client
  -Server view rebooted
  -There is no open Firewall. I'm on the same subnet
  -increases the size of memory for video display.
  -everything restarted.
  -Check the dns settings, seems to be ok.
  -removed from the field and added.

  Infra:
  ESX 5.1.0 799733
  See 5.1.2
  View customer: 5.2.1 build 937772
  VMware-viewcomposer - 3.0.0 - 691993

  I search around forums but cannot find an excat answer to this question.
  Any help much appreciated. Thank you all

  The complete list of the supported operating systems see 5.1 Agent is shown on page 15 of the installation guide - http://pubs.vmware.com/view-51/topic/com.vmware.ICbase/PDF/view-51-installation.pdf - see the section on operating systems supported for Agent view.

  You will find information on this forum of the people who got 8 windows work and to avoid the "black screen" "the connection to the remote computer has ended", but note that it is not taken in charge with Discover 5.1.x.

  Mark

• Is possible to create a lot of email account on the same computer can affect the performance of the computer or something else?

  Is possible to create a lot of email account on the same computer can affect the performance of the computer or something else?

  Sheman salvation,

  What do you mean by "creates a lot of e-mail account on the same computer?

  I mean after connect hotmail.com let's say, after uttering the 1st email account, so I create another and one more, etc...  can affect the performance of the computer or something else?

  I know that with 1 or 2 email account is sufficient, but I just want to know by I have

  can affect the performance of the computer or something else?

  stuckfree,
  Who is 'Sheman?

  What about your further explanation - it can affect the performance of the computer?

  Together?  Only if you're so low disk space (almost out - the figure even single or double megabytes (MB) area) that everything is affected.  Otherwise - the only performance can affect the messaging application, you use as it POP3, IMAP, Exchange, etc. connects to different e-mail providers at the same time, you need to get your e-mail.  I have three to five settings of accounts on each of my systems (or accounts Hotmail, Gmail, or accounts, corporate, local accounts or accounts ISP, etc.) in Microsoft Outlook and don't encounter any problem.

• Can't access the files from the HARD drive of any account on the windows computer 7

  Hello

  When I tried to connect my Western digital external hard drive to a 32-bit desktop P 3 with a Windows XP SP1, then this HARD drive is not detected. Then I tried to copy his WD driver ITS a USB Flash drive, then isntalled all the WD HARD drive was always plugged into my computer. After that, the HARD drive was identified by computer and appear in my computer. As I thought that this folder has been created by the installation of the driver, did not exist on my HARD drive before connected to the desktop computer.

  When I plugged my WD HDDagain to my laptop HP with Windows 7 SP1 64 bit and I tried open this folder, and then the main folder only opened without facing access denied, however, access to all of its subfolders, and the files inside it has been declined.

  In addition, althoguh the username admin Curernet "Mohammad" can open the folder of human "83f04ce083fb03083bb88e50", as shown in the screenshot above, it can not access all of the subfolders, files in the main folder, and to access, I will need to use the scecurity tab. Thus, it would be absolute nonsense, if I want to have access to all of the subfolders, I will need to use the security for each tab.

  How do I gain access to all of the subfolders with use of the Security tab once the time (i.e. as long as all subfolders are inside the main folder, then simply use the main folder security tab?

  

  As long as the current username "Mohammad" can open the folder of "83f04ce083fb03083bb88e50" man, "Mohammad" is so allowed system to have access to the main folder as shown in the screenshot above, then I think that the username 'Mohammad' will have to reach all subfolders as well. However, when you try to open any subfolder or file, then the current user 'Mohammad' name could not have access to all of the subfolders in the main folder and all subfolders or files opening gave me this error below (screenshots below)

  

  

  I tried to remove this main folder, however, each time, I found myself with a loop "you need permission SYSTEM to make changes to this file.

  

  Original title: file access denied

  Groan.  It is so easy to fix, and you should have gotten a lot better support now.  Surprisingly, the worst suggestion came directly from the "Microsoft Support Engineer" Reda Singh, his suggestion potentially compromising the security of your computer while doing absolutely nothing to solve the problem.  Fortunately, it seems like you didn't do something quite right and so the script was not run.

  First of all, let me explain why this difficult access occurs in the first place.  Originally, you had three 'users' granted access to training, SYSTEM, Administrators, and Mohammad.  SYSTEM allows Windows to read your disk, and retrieve things like its label.  It can also allow your antivirus software to access the drive.  Because this OPTION is enabled, Administrators is not accomplish anything, even if you are an administrator.  As long as this OPTION is enabled, this permission only works for programs, that you manually raised to run as administrator.  This leaves access to the drive depend on the last entry, Mohammad.  The problem is the SID behind Mohammad is only good on the computer, it was created, so if you connect this HARD drive on another computer, no access is allowed!  Enter the security on the other computer dialog box, you can either see something "could not read permissions" or you will see the SYSTEM, directorsand a third entry with a long series of numbers.  It's your first computer Mohammad , and it will not work on another computer.

  It is not surprising that you're facing this problem because you are using the drive on multiple computers, which is running XP that is not UAC.  Here's how to unlock a storage drive (in Windows 7) so that it can be normally accessed in any PC without any permissions problem:

  1. Press [Windows] (or click on the circles to start), and then type "user account control".
  2. In the search results, click on "change user account control settings."
  3. Drag the slider to "never notify".
  4. Click [OK] to confirm the changes and restart your computer.
  5. Open Windows Explorer, right-click on the affected drive, and then click Properties -> Security (tab)-> [Advanced]-> owner (tab)-> [change].
  6. You should be on a dialog box that asks what you want to change the owner.  Click on Administrators.
  7. Check Replace owner of subcontainers and objects, and click [OK].  Windows should start processing all the files on the disc.  This may take a few minutes.
  8. When it's done, click [OK] to close the property message and then close out of all other dialog boxes.
  9. In Windows Explorer, click the drive affected again, and then click Properties -> Security (tab)-> [Advanced]-> [edit permissions].
  10. Now in the dialog box Advanced security settings , click the button [delete] repeatedly to remove all permission entries.
  11. Add SYSTEM and grant full control.
      1. Click on [Add...].
      2. Type 'SYSTEM' and press [Enter].
      3. Check full control in the allow column and press [Enter].
  12. Add Administrators and grant full control.
  13. Add users and grant Full control.
  14. In the dialog box Advanced security settings , you should have three entrances of permissions: SYSTEM Administratorsand users, all granted full control.  Check "Replace all permissions of child object with permissions inheritable from this object" and click [OK].
  15. Click [Yes] to confirm the replacement of permissions.  Again, Windows start to process all files on the disk, which may take a few minutes.
  16. When he finishes, close to all the dialog boxes and check that all records are now accessible.  You may have to refresh (or close and reopen) explore to see the changes.
  17. Assuming that it worked, we will re-enable UAC to reduce the vulnerability of temporary security, that we created earlier.  Press [Windows] and then type 'user account control '.
  18. In the search results, click on "change user account control settings."
  19. Drag the slider to the position below the top (position #2, by default).
  20. Click [OK] and restart your computer.  Now, the files remain accessible.

  This should straighten the permissions of your disk storage so that you can use it again.  You may need to empty the trash on this drive after changing permissions.

  Don't do this procedure on your C:\ drive, it will seriously reduce the security of your Windows installation.  This is for the readers of storage only.  If you need access to a specific file that you created to C:\, you can safely do the steps above on this issue, but never on the C:\ drive itself.  Please note that when you perform this procedure on a folder instead of a hard drive, you will need to replace this step #10:

  10. now in the dialog box Advanced security settings , uncheck the box "Include permissions can be inherited from the parent to this object" and click [delete] to confirm.  If some permission entries remain, click [Remove] until they are all gone.

  The concept is the same in Windows Vista, even if the exact steps differ from the foregoing at least Windows 8.  In Windows 8, you must also disable UAC with a registry tweak because, unlike Windows 7, UAC remains on even when the value of "Never notify", giving rise to all sorts of problems in Explorer tries to work with file permissions.

  Oh and to answer one other question I saw you ask from the beginning: this folder of the .net Framework was created by .net Framework Installer.  He breaks all the rules and frustrating unpacks his junk everywhere where it feels like.  I got it decompress on a front SD card, making the installation would take forever.  After installing the .net Framework, you probably disconnected the drive before restarting your computer, so these files let me.  Or the installation crashed and started you again.  Meanwhile, installs the failure left its Temp files behind.  It was supposed to remove the folder when the installation is complete.  You can remove safely as the folder manually.

• Easy transfer will leave an existing account on the new computer intact?

  I have two accounts on the new computer.  Can I use easy transfer to upgrade one of the accounts from an old computer?

  It should leave intact and import only those that you are brining.  Make sure that it is not the same accout name, so nothing gets replaced.

• Windows 7 - Clone user account on the same computer

  In Windows 7, I have a single account to user configured with all the settings I want it - essentially a default account.

  I tried to just create a new account based on this account, but the "Copy To" button is grayed out on everything except the "default" account.  (I did the settings for the default account, but I didn't know how to connect to it).

  I don't know if this is a defect, or in Microsoft for this.

  Is there a way to make this account the value by default so that I can use it to clone other accounts on the same computer?

  Is there an easy way to do this?

  I found a way to clone the account.

  Logon as the administrator, you can create a new account with the name that you want for it (for example "new user"), and then restart.

  Connecting under the administrator again, copy the files to the account you want to clone, to the new account.  (it takes a lot of time), when it finished, and then re - start.

  The new account will be a duplicate of the source account.

  Please note, that since it is a duplicate, of the default file locations will be for the account of the source, so you'll have to go through and change them manually.

  It is not an elegant solution, but it is easier than creating the account to start from scratch and do all the settings.

  It would be nice if there was a way to personalize the account 'by default'.

  If you listen to Microsoft, please consider this for the future.

• How can I add Lightroom to another account on the same computer mac user?

  How can I add Lightroom to another account on the same computer mac user?

  If you have installed normally he is already there. Simply go to the folder applications and double up until it clicks.

• Hi, I want to add a link back to a button in the muse. Any ideas? thinking that I'll have to add the following < a href = "javascript:history.back ()" > < /a > and return code in a text editor by hand after I exported the site in html format.

  Hi, I want to add a link back to a button in the muse. Any ideas? thinking that I'll have to add the following < a href = "javascript:history.back ()" > < /a > and return code in a text editor by hand after I exported the site in html format.

  No need to code the hand something to do.

  Create your button or link just as you would for any button or link.

  Click on your button

  In the hyperlinks tool simply add javascript:history.back()

  Press enter

  Fact...

• In the middle of my teens adding devices, and registration for the apple's music, security issues have been changed and now nobody seems to remember the answers.  How can you bypass those to change your settings?

  In the middle of my teens adding devices, and registration for the apple's music, security issues have been changed and now nobody seems to remember the answers.  How can you bypass those to change your settings?

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  
  (140233)

• I accidentally uninstalled the calendar on the desktop. How can I get that back?

  On Vista, I accidentally uninstalled the calendar on the desktop.  How can I get that back?

  Thank you, Lynn

  Hi Lynn,

  Thanks for posting the question in the Microsoft Community. If I understand correctly, you are faced with the question with. calendar Windows Calendar Gadget are you referring? If this is not the case, are what timetable you referring? You use a third-party software?

  If you are referring to the Windows Calendar gadget, I suggest you to refer to the article and see if it helps:

  Windows Sidebar and gadgets (overview)

  See this link for more information.

  If the problem is not resolved, please respond with more details and we will be happy to help you.

  Thank you.