Brand new I phone problem

Similar Questions

• Need serious help. New 8831 phones problems.

  Thank you in advance for helping with this.

  I pulled out recently of new 8831 conference phones to replace my old phones 7937 spider, unfortunately phones know terrible incoming audio. Phones are on a branch site, connected via MPLS and registered at 8.6 CUCM to Headquarters. We have a total of 900 7940 phones that have no problems in any of the different location and band bandwidth/congestion is not a problem. The audio input signal poor that happens to every call. Audio output is fine. 8831 phones are having the same issues at several sites of the branch, but seems more predominant in some. The question has been described as 'audio static, choppy, distorted, with a few breaks.

  I tested with G.729 and G.711 without some luck, after using the web interface to enter stats here, this is what they look like:

  Remote address
  Local address
  10:33:26 departure time has
  Flow in Active status
  Host name
  Sender packages 7180
  Sender 143600 bytes
  The sender Codec G.729
  Reports of the sender sent 0
  Sender report time sent to 00:00:00
  RCVR 2215 of lost packets
  Jitter AVG 20
  RCVR Codec G.729 
  RCVR sent reports 0
  RCVR report time sent to 00:00:00
  RCVR packages 7178
  RCVR 143560 bytes
  MOS LQK 2.8657
  AVG MOS LQK 2.3054
  Min MOS LQK 2.0000
  Max MOS LQK 3.0295
  MOS LQK Version 0.95
  Cumulative conceal 0.1356 Ratio
  Interval to conceal Ratio 0,0560
  Max conceal 0.2766 Ratio
  Hide the dry 140
  Severely hide dry 120
  Latency 40
  Jitter of Max 160
  Sender, size 20 ms
  The sender of the received reports 0
  Report to sender time received at 00:00:00
  RCVR size 20 ms
  1266 thrown RCVR
  RCVR reports received 0
  RCVR report time to 00:00:00

  As you can see that the MOS is pretty bad, jitter and ignored packets seem to be bad too. Intrasite tests have resulted in better looking for numbers. Initially, I immediately thought "QoS" but all other phones are fine and the problem is with audio INCOMING do not outgoing.

  All comments on this are appreciated.

  Thank you.

  Hello

  As you can see receiver lost packets number is very high, which will cause audio choppy. Looks like you face below default

  https://Tools.Cisco.com/bugsearch/bug/CSCuq03746

  Also can ensure you codec used is g729r8 not g729br8. g729br8 has integrated VAD have so it will drop some packets. Also disable VAD in any voip dial peer by using the command "no vad.

  Kind regards

  Mohit Singh

• OfficeJet 4630: brand new officejet 4630 with the problem of black ink and ok button does not work

  Hello! Today, I bought a new printer, officejet 4630 and it included ink cartridges in the box.

  ISET it upward as the sheet in the box said. After I had filled in date etc, I put in the ink (and Yes, remember to check it was compatible and take the Ribbon), then this message showed on the screen and still doesn't work:

  "Problem of ink cartridges. The following ink cartridges need to be replaced"and a black dot.

  The cartridges were brand new and came in the same area as the printer.

  I tried a reset (taking the power cord, wait 60 s etc) I saw in the Hp support you need to press 'ok' to get rid of the message before restarting. I can't press ok. It sounds right. I press any button.

  Suggestions? Of course, I can try it with a new cartridge, but to pay $20 for a new cartridge, when it was included in the box and should work is not correct.

  Hi @Candykuma,

  Welcome to the HP Forums!

  I understand that you ar get the error, the "problem of ink cartridges. The following ink cartridges need to be replaced"with your black cartridge on your printer HP Officejet 4630. I am pleased to address this error of cartridge for you!

  Please, try the steps in this guide, a "missing cartridge", 'cartridge problem,' or 'not compatible ink cartridges' Message error for HP Officejet 4630 and HP Deskjet Ink Advantage 4640 e-all-in-one printer series.

  If this guide does not solve your problem, please Contact HPtelephone support for further assistance, as the ink cartridges are under warranty. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• Update Verizon iPhone 5 new IOS 10 problem: cannot receive/send calls. Shop Verizon says it's an update causing Apple to popular phones to crash all day. Any input or advice, please?

  Update Verizon iPhone 5 new IOS 10 problem: I can't receive/send calls. The store Verizon says it's phones a popular causing update Apple crash all day. Any input or advice, please?

  Don't you say no service at the top?

• My iphone 6 s most is having hanged. They said he he's is not replaced. I was wondering how should I confirm that the phone I get is a brand new one not used one?

  My iphone 6 s most is having hanged. They said he he's is not replaced. I was wondering how should I confirm that the phone I get is a brand new one not used one?

  This will be an iPhone manufacturer refurbished in excellent condition 'as new '. You can not change anything on this subject because it's the usual Apple policy on replacement devices.

• Problem for C7280 brand new printer cartridge-

  Printer status indicates the yellow cartridge is good - brand new HP org. just installed.  But all the software that I try to print with comes up with a message that says... you need to install a cartridge yellow press. ... the button to continue to print in black or cancel...

  I cleaned the heads a couple of times... I took the cartridge one put new...

  Help...

  As some programs do work and others to not its probably not a hardware problem. This printing from a memory chip as wel works as wel proves. So to publish his most likley a software.

  The disk of the printer software find the UTIL folder and find the CCC folder. In this case, there should be a file called Uninstall_L4.bat (with or without the .bat, added to this, depending on your computer settings. This file and it will Run and cleaning of your software. Reinstall it after this and try to find out.

• Acer computer brand new with problem BSOD in Windows 8

  Hello

  I bought this computer Acer Predator brand new and I'm getting BSOD related reboots.

  Could you please check my minidump file and give me advice?

  Or I'll take the computer as the hardware and the software is under warranty.

  Concerning

  https://onedrive.live.com/redir?RESID=734A709756E8E767%21140

  Yasin

  Hi John,

  We have several audits of bug:

  ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (CF)

  This indicates that an attempt was made to execute non-executable memory.

  KMODE_EXCEPTION_NOT_HANDLED (1e)

  This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  Verification of error 1E, {ffffffffc000001d, fffff801af0bb63e, fffff801af363800, 2}

  0: kd > fffff801af0bb63e ln
  (fffff801'af0bb600)   nt! KeReleaseInStackQueuedSpinLock + 0x3e |  (fffff801'af0bb670) nt! KeResetEvent

  ^^ The exception is produced in nt! KeReleaseInStackQueuedSpinLock. This routine restores the original IRQL that the operating system saved at the beginning of the call to KeAcquireInStackQueuedSpinLock .

  KeAcquireInStackQueuedSpinLock increases the level of IRQL at DISPATCH_LEVEL level during the acquisition of the spin lock.

  If we check the IRQL at time of accident:

  0: kd >! IRQL
  Debugger saved IRQL for processor 0 x 0-2 (DISPATCH_LEVEL)

  ^^ Very well, we're right on the money in the measure of the level IRQL go... but why an exception occurred here on this pretty normal routine? My guess is we had a DPC/lock and the system deadlocked. It could be both material.

  TIMER_OR_DPC_INVALID (c7)

  This is issued when a timer kernel or deferred procedure call (DPC) is located somewhere in memory where it is not allowed.

  This problem is usually caused by a driver, not to cancel a timer or a DPC before freeing the memory where he resides.

  ---------------------

  1. make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  2. remove and replace McAfee integrated Windows Defender in Windows 8 for temporary troubleshooting purposes as it is probably cause conflicts:

  Removal of McAfee- http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  3 if the two above fail, return the laptop ASAP for a new replacement brand as then it is a hardware problem. No brand new laptop should be planted in all circumstances.

  Kind regards

  Patrick

• HP Pavilion 17 Laptop Touch t: brand new out of the box HP Pavilion 17 t Touch M7H91AV laptop is so slow

  Last night, I took my laptop HP Pavilion 17 t Touch brand new out of the box and it is so slow.  The startup is slow.  All operations running slow.  The use of the internet is slow.  I tried to transfer files from Carbonite on this new computer and just the process of realization of this installation took me a half hour.  This morning I had to reboot and it took 5 minutes.  I only know enough about computers to be dangerous, so I don't mess with many settings myself.  This performance unacceptible on a new computer.  This is certainly the slowest computer I've ever owned.  All solutions that anyone can offer (as a reminder, I need instructions step by step)

  MLubb

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about serious problems with your HP PC brand new and wanted to help.
  
  Since it is a machine relatively new, instead of hurt for hours to fix yourself, why not just let HP fix it - for free!
  
  You must contact the HP Customer Support directly so they put you in contact with HP Tech Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
  Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
  ========================================================================

• 15z HP touchscreen laptop: computer laptop brand new will not start

  My brand new laptop just cameo yesterday and it keeps showing "Boot Menu" with 2 options (FreeDOS and Documents HP). If I choose option 1, which is "FreeDOS", it will show other 2 options: 1 - FreeDOS load including driver HIMM XMS-memory and 2 - load FreeDOS without driver). I have chosen these 2, it displays a black screen with "C:\ > ' at the top left and it won't do anything then. What should I do? I ordered it online on the official site of HP.

  Hi @Iamtrucpham ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your issue on your laptop HP 15z touch and issues with Free Dos. This laptop does not include Windows, you need to buy Windows separately. Free distribution of base back requires no fees or royalties, and the creation of custom distributions is permitted.

  You have a few options. I can't tell you that we chose, I only know you what they are. The first option is to buy a copy of Windows from a retailer and install it on your computer.

  If it's now what you wanted, please use the following link to create yourself a file number, then call and it can help speed up the process of appeal:

  Open the link: www.hp.com/contacthp/

  File number and phone number are displayed.

  They will be happy to help you immediately. Thank you.

• How can I get my serial number or IEMI number for me to make an appointment at a genius bar or get help online when my iPhone brand new completely deserted?

  How can I get my serial number or IEMI number for me to make an appointment at a genius bar or get help online when my iPhone brand new completely deserted?

  The IMEI number is printed on the back of the phone, unless it's an iPhone 6. You can also find the serial number by eject the tray of the SIM card on the right side of the phone (insert a paper clip or similar object into the hole). It is in very small print at the bottom of the status bar.

  It should also be in the box the iPhone provided in if you bought Apple or an authorized dealer.

• I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get i

  I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get into the phone. Why has this happened?

  The United Kingdom, where did buy you it?

• AppStore crashes on my brand new ipad 9.7 pro, how to fix

  AppStore crashes immediately on my brand new ipad 9.7 pro, how can I solve this problem?

  That have you tried so far for example have you tried

  -closing of the application via the taskbar of the iPad ( force an app to close on your iPhone, iPad or iPod touch - Apple Support)

  -do a soft-reset/reboot of the iPad ("force restart" on this page: restart your iPhone, iPad or iPod touch - Apple Support)

  If they don't fix it you tried:

  -backup (purchases by copying on to your computer's iTunes library: file > devices > transfer purchases) and restoring the backup

  -l'iPad resetting to the factory settings (after copy purchases through your computer's iTunes library and the print out of documents and photos) and sync just the content back

• brand new portable 15 hp won't start

  Hello.
  We went today to a Hp 15 laptop, he has been in charge for a while and won't turn on at all.
  The power light is on, the charging light was red... Blue turned after a while and the caps lock light keeps flashing... But the screen still does not turns on, there is also no noise from the machine... Can someone please advise?

  Hello

  My best advice, considering that it is a brand new machine with what looks like a hardware problem, would be to take it to the retailer, it was purchased at and get a replacement.

  Kind regards

  DP - K

• Brand new T440s with BIOS password

  Hello

  I have a big problem.

  I bought online a new T440s I opened the box for the first time myself. When I go into the BIOS it asks for password and I just hit enter without entering a password. I can get into BIOS but I can't change any settings.

  What can I do? A brand new thinkpad can come with a BIOS password on the box?

  I get conflicting information regarding the type of password. First image said his power over who can be removed but bios says his supervisor.

  

  

  In fact, it can happen. Sometimes large customers require laptops preconfigured which may include customized supervisor passwords. Of course, you should have not received one of these units. Ask the seller for a replacement unit, there is no easy way to remove an unknown supervisor password without replacing the motherboard for the laptop.

• AccelerometerSt.exe error on the computer Windows 10 brand new

  I have the same problem that many others have with the Application AccelerometerSt.exe error.   BUT, I have a brand new - 1 week old computer and it came with 10 windows already on it.  I have the HP Envy x 360.   How do you intend that to solve the problem.   If you uninstall and reinstall Windows 10, I'll need much more detailed information.   I don't know how to do this - which was the reason why I only watched computers with her already preinstalled.

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K