HP media center m8200n pc units

Similar Questions

• HP Pavilion Media Center m8200n Desktop PC upgrades tips and advice help.

  Hello everyone I have a HP Pavilion Media Center m8200n desktop PC that I'm looking to upgrade. Can someone please advice me on the following topics:

  Memory: What is the best possible that my system can contain that currently, I am running windows 7 ultimate 32 bit

  Video card: I'm looking to install a decent video with hdmi support card that my system can contain I am aware that I can not use certain cause of my ability video cards, the upgrade of the power may be an option. Can someone advice me please on these subjects, it will be very appreciated thanks everyone I'll be sure to rep and appreciate all help thanks.

  Without replacing the power supply, the EVGA NVIDIA GT 240 1 GB GDDR5 should work. This card is spec'd for a PSU with 18 amps of bus + 12 volts. This card can stretch your PSU, but give it a try.  I have this card in my system of m9200t.  This card will give the treatment a real helping hand from your video.

  Review the specifications of performance ATI and NVIDIA . Look at the specifications of strip memory bandwidth and level of DirectX support.

  How to replace a video card.

  Your PC will not work with memory dual channel and the processor will dictate the speed of transfer.  Wait for the upgrade of the processor until you see how the system works.

• I got a new computer and media center tv quality units is not good

  I just got a brand new computer and I have a tv tuner that I used on my computer spent and now the quality is not good. It is very grainy. I use the same screen and everything.

  Hi Mikey,

  Thanks for posting this question in the Microsoft Community.

  As I understand it the quality is not good, when viewing the Media Center TV. Before we begin, I have to ask you a few questions.

  You have installed the drivers for the TV tuner on the new computer?

  You can also start the computer in a clean boot State, and check if all third-party software can be the cause of the problem.

  Note: when you are finished troubleshooting, follow step 3, mentioned in the article to start the computer to a normal startup.

  You can also visit the manufacturer of TV tuner for all of the updated drivers and install the same.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.

• HP media center m7580n power units

  is power in this computer, hp m7580n Center media, it is proprieitary... or can I install a regular atx PSU in it?

  Ronss, no, it's not owner.  The best way to know if the standard ATX PSU will fit is to measure the existing PSU.  Find a new power supply that you like and that you access the manufacturer's Web site to compare the measures.

  Would what power you buy?

  Here are two brands of high quality who will do a good job:

  http://www.Newegg.com/product/product.aspx?item=N82E16817139008

  http://www.Newegg.com/product/product.aspx?item=N82E16817341001

  I had the GXS OCZ 600W in my computer until I upgraded.  It's a great PSU.

• HP Media Center m8200n won't find card WinTv

  OS Win 7 64 - bit, 8 GB of ram, nVidia 610 card with 2 GB of ram, 1800 WinTv card went out got another card and replaced by the Win TV 1850. Tried to install the driver disc supplied but the result is a message that says: there is no device found. What to do to fix this problem.

  Update: it turns out that the slots on the motherboard was bad. Replace the motherboard with the same type and this has solved the problem with WinTV cards does not. Now don't seem to be able to get the IR receiver to work. I loaded the last disk and windows has always said that there is a problem with the drivers. Hauppauge contacted on the issue. I think that the receiver itself may be bad. Thanks for all the help that has been published. It help me to identify the problem.

  Looks like maybe the slot of PCIx1 has failed and it could also be that the original card Win TV may not be gone, if the housing has failed.  Inspect the area around the slot to see if all observable bad connections exist. Also inspect the contact surface in the slot with a magnifying glass.  A problem like this is not unheard of but is rare.

• HP media center m370n pc units. Windows XP SP3 32 bit

  I get the message cannot install C:\hp\bin\SetRes.log after doing a non-destructive system recovery, using my recovery CD tools. I did the cover because I downloaded without knowing a virus, I couldn't clear, using Microsoft Security Essentials Program. So when I received the message that precedes, I pressed OK and tried to continue. The PC has hung up, gave me the busy hourglass, but nothing to do! So, I tried to stop it and restart. In doing so, then I got a red x message windows, "not fully installed system. Please run together again. When I tried to do, I kept getting the same messages! Help! How can I fix?

  Mac41two, welcome to the forum.

  Here is a guide that can help.  Also, take a look at this guide to see if it helps.  These guides relate to your problem and can give you a solution.

  If your problem is solved, please click "accept as a Solution.

• Not able to connect Xbox 360 to Windows Media Center 2005 Extender.

  Original title: windows media center extender 2005 units.

  I'm trying to connect my Xbox 360 to my computer Media Center XP 2005.  The computer recognizes the xbox but when I start Media Center, I don't have an option 'task' add the Extender.  I checked Microsoft updates and I'm updating but it seems that my software is not.  Can you suggest how can I fix?

  Thank you

  Nyla

  Hi Amar,

  You can follow this link & check if the problem persists:

  How to configure your console Xbox 360 as a Media Center Extender?

  Hope the helps of information.

• "No data available" Media Center Guide

  4 February 20114 Hi, I'm in London, I have two machines Vista Home Premium and a Windows 7 computer. I use a tuner TV USB Hauppauge on each of them. Everything worked well until the middle of December 2013. After updating the Guide two Vista machines now show "No data available" for some of the channels including BBC1, ITV, channel 5 and many others. I can receive the channels but not see their guide ads. The EPG Hauppauge also works fine on Vista machines. The Windows 7 machine is not affected and displays complete information.

  I see this fault happened in January 2013, and it was a result of Microsoft to not renew their contract with Red Bee. I visited Red Bee (they are close to me) but they don't know about this topic and say that they do not have a contract for the end user of Microsoft verification.

  I have tried everything I can think of including Windows Vista Factory reload, change of postal code, change the transmitter and c and nothing seems to work. I lost days trying to find an answer to this, and he sends me nuts!.

  Please someone knows how to fix this?

  Thank you

  GuyofLondon

  You are welcome.  Sorry for the bad link.

  You can also try the settings /' add lists to
  channel ' and manually add each channel to the channel appropriate
  name in the list

  Supporting documents:

  Troubleshoot Guide downloading problems in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-guide-downloading-problems-in-Windows-Media-Center

  Use the Guide in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows/use-guide-Media-Center#1TC=Windows-7

  Download updated listings in the Guide in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/download-updated-Guide-listings-in-Windows-Media-Center

  Data from the electronic Program Guide in Windows Media Center in the United Kingdom and Ireland

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/23/t/103680.aspx

• Media Center incorrectly determines the digital tuner on my Hauppauge 1850 as incompatible to the Canada for digital channels over-the-air via antennas

  I have a hauppauge tuner card 1850. I live in the Canada. If I've set up media center with the Canada as my position the digital tuner is not recognized as compatible in my area. If I place the library with my position defined in the United States. The digital tuner is recognized and works very well. The downside is that I can not guide ads for my actual surface when I set the location in media center in the United States.

  http://experts.Windows.com/w/experts_wiki/enable-ATSC-and-QAM-in-Canada-for-Windows-7-Media-Center.aspx
   
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/25/t/85193.aspx
   
  could help you.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Cannot connect to media center netflix plugin

  When I click on the logo of netflix in media center, I'm redirected to the login page.  After entering my credentials, I get this error message: "there is a problem with your account. Please sign in again"(blue media center error box units).  I checked if I use incorrect credentials can I just get an invalid account information entered (under the password box looks like plugin error message) so I know it's access netflix at least for auth credential.

  I deleted history and cache in my IE browser.
  I also uninstalled and reinstalled the plugin from netflix.
  This problem just started, I use the plugin without any problems and as recently as yesterday.
  Windows 7 x 64 personal

  Yes, I checked and the /lists API call that retrieves the categories of movies you like to watch now works.  No doubt on the end of Netflix.  If this happens again, we will need to complain that one or more of their developer API calls does not work (and try not to mention the netflix plugin) for their customer support think they get an automatic brush shut off when a customer mentions it.

  Same time that this problem has been corrected, I found a work around involving fake call lists; This enabled the plugin works.  It is unfortunate that the plugin is not designed to handle certain non-critical service a bit more graciously calls and give us a message giving the possibility to ask for the plugin to try anyway, limping along.  If this happens again, I'll post workaround for anyone interested.

• The Electronic Program Guide (EPG) for Windows Media Center stopped display information guide

  The Electronic Program Guide (EPG) for Windows Media Center stopped display guide information beginning January 1, 2013 in the United Kingdom and Ireland.

  Microsoft is aware of the issue with the Electronic Programming Guide for Windows Media Center in the United Kingdom and Ireland.  We have identified the cause and have already deployed a fix for the United Kingdom.  A solution for the Ireland is being prepared and we will post an update when the problem is resolved.

  We apologize for the inconvenience to Windows Media Center users in these countries.

• Windows Media Center does not seem to recognize that I'm in the United Kingdom.

  I could not the skyplayer appears, and now I'm trying to get a video MSN to work but alas... No...

  Go into settings and download of updates does nothing.

  I went in the TV section and downloaded the settings of 5 MB, but it says the guide is not available and the icons are always for shows in the United States.

  I remember when I tried to get the skyplayer to work, I got as far as the discovery that this Media Center wouldn't recognize my location.

  There is some information herein, that will be helpful in your case is another question?

  Internet TV does not appear as an option in Windows Media Center
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/b4f9351d-4cb9-4493-97ba-baa26fcdc8e4

  Can't get internet tv
  http://www.SevenForums.com/Media-Center/32420-cannot-get-Internet-TV.html

  Cannot acess internet tv through windows Media Center 7
  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/2fe52acb-0655-48c5-9fa2-3da6cb6f94d4

  Try your luck here too.

  http://social.answers.Microsoft.com/forums/en-us/w7pictures/threads

• Receiver error message: can't open messenger, when you try to play a DVD in Media Center Media center units.

  Original title: Media impossible Center of opn mesenger

  I have the DVD that I can play on non-microsoft program.

  When I try to play on Medis Centre I get a message;

  Cannot open messenger media center units

  Can you direct me. Shel

  See this previous discussion: http://answers.microsoft.com/en-us/windows/forum/windows_xp-tv/media-center-failure-messages/3962030b-76c3-4e51-a078-26322e702c06 (26 June 2010)

  Related...

  Windows Messenger in Windows Media Center error
  http://mymce.WordPress.com/2008/08/20/Windows-Messenger-error-in-Windows-Media-Center/

  Error Windows Messenger in Media Center Edition 2005
  http://blog.jasontsang.ca/2008/08/Windows-Messenger-error-in-Media-Center.html

• Windows media center xp 2005 with digital tuner units

  Windows media center xp 2005 will not see my digital tuner when I installed it.  I do not have

  an analog tv tuner.  Is it still a bug, or is there a solution for this.  Thank you

  That is right.  However, the United States and the Canada, MCE2k5 requires the installation an analog tuner.
  There is also no support for ATSC in Canada (IIRC), and MCE2k5 does not natively support the Clear-QAM (unencrypted digital cable) tuners.

  Could node busy, you give some details?  What country are you in, and is what tuner (s) you are trying to use?

  Respect,
  Chris

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Why is media center saying my dvd, s are not this country? they were purchased in the United Kingdom.

  I keep trying to play the dvd in my media center player, but a flag goes up to to say that they play in this country. I bought them to the United Kingdom!

  DVD is encoded with a "Region DVD". To check what you responds to go into Device Manager, select the DVD drive and check in system properties. License only 4 changes, so be very careful.