HP media center pc m7277c CPU units

Similar Questions

• Upgrading RAM in HP Media Center PC m7277c

  I have an old HP Media Center PC m7277c with 2 sticks of 512 MB/DDR2 SD RAM. BIOS shows that there are 4 banks of memory - 1 and 3 are busy. I would like the 512 the scrap and upgrade to 4 sticks of 1 GB. My question - my system will support DDR3? If so, standard DDR3 sticks will fit in the slots of the HP box?

  Hello:

  You can install 4 x 1 GB memory PC2-5300 or PC2-6400 (6400 memory will only run at 667 MHz).

  DDR, DDR2, and DDR3 memory modules are not interchangeable.

  They run on different voltages and have a different amount of pins.

  The slots of each type are cut in different places to prevent us from short-circuiting the chip memory or motherboard by installing the wrong type DDR memory.

• Windows media center, internet-tv "blockages" units.

  I have experience of random blocks, watch TV on the internet.

  I'm looking for the download, or the 'good' solution for this problem. LV

  Hello, Lee

  You have problems using the Internet TV in Media Center or another snap-in an online service?

  If the attempt to add-in, reinstall the Internet TV application: go to start, Control Panel, programs, uninstall a program, select Internet TV for Windows Media Center and choose uninstall.

  Then, open Media Center and re-install the Internet TV application.

  In addition, make sure your video drivers are up to date.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• media center tv set up units

  I just got the smart touch IQ816 and cannot implement the tv with the remote control as it should... I have a Wegener SMD 515 decoder that is not in the list of media set-top boxes, so I can click on other boxes and get the work of the tv, but cannot configure for remote control and the main problem I have now is if I make a stop down from my PC I get picture but no sound when I start the PC again... I don't have this problem if I do a restart, just one stop to the low... anyone else having this trouble and someone else has the decoder Wegener.

  I'm new here and don't know any... should I put my original message somewhere else and if so how do I do that?

  Thank you

• Windows xp Media Center 2005 edition crashes while downloading the tv guide

  Installation of Media center TV guide comes to where I choose my provider and click Next the program freezes and the only way out is via the Task Manager. Any ideas? Ive updated XP and media center edition 2005 until units there is no more updates or extensions to download.

  I was wrong, I've been experimenting and finally succeeded. It has nothing to do with nividia.

  Remove the Microsoft .NET Framework 4. There is also a client, delete that one too.

  Anyway, I tried to put it back recently, and for me it was ok.

  I suggest that you first try the update of windows. If this does not work, uninstall the foregoing.

  Problem was more for me after that, I really believe that it will be for you too.

  Good luck!

• How to contact the provider of media center guide?

  How can I contact the media center for New Mexico, United States guide provider to give them information on our cable network building?

  Hello KitRichards,

  I'm sorry to tell you that this is not an appropriate forum for your question. Your media list of guides depend on your local television service provider. I suggest you contact your Local Provider for more information TV service.

  I suggest that get you in touch with your service provider for more information on this local television.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• The Electronic Program Guide (EPG) for Windows Media Center stopped ownloading/display guide information beyond October 24, 2014

  It seems to happen again.

  Today, COMICS Guide stops at October 24, 2014.  I expect it to be complete until October 29, 2014.  Any attempt to force a download is successful but only until October 24, 2014.

  Microsoft know about this?

  They do nothing to solve it - before I stop recording of all the favorite again TV show?

  How can I check this?

  Derek S

  Rahul

  Last night, all of a sudden the problem is resolved.  Thank someone at Microsoft who has done this for many Media Center users in the United Kingdom.

  concerning

  Derek

• HP Media Center a1560n CPU update

  Hello people, try to change the processor of my product from HP HP Media Center a1560n #: EX278AA that came with an Asus Mobo. L5LP-(Leucite) is NOT an Emery nor a Leonite or a Lithium battery. The original processor is an Intel Pentium D 915 @ DC 2.80 GHz/800 MHz FBS / Socket 775 / 4 MB L2 Cache / Max TDP 95W. The (945 G Chipset) Mobo very good posts with this installed processor, once I have placed my other CPU a GHz Intel Pentium D 840 Extreme Edition @3.2 (Smithfield) / 800 MHz FBS / Socket 775 / L2 Cache of 2 MB / Max TDP 130 w turns on all fans but not post. (Note fans never descend form high rpm, as they do with the other CPU). R & R'ed CPU several times without any difference. 915 POST but 840 not. The HP product description says that the 800 series is an acceptable upgrade processor.  I just updated my BIOS of 3.15 to 3.19, thinking that this would settle it with no joy. Is it because my CPU is one extreme and not a CPU 800 series regular or due to the difference of PDT?  I'm sure that I have a (Leucite-GL8E) Mobo from Leucite because I compared all different Mobo of the Mobos L5LP-EL choices and the Leucite is an exact Visual match from the photos of product description, and it is one that is under the description of the product for my product to 99.99%. Where the other boards (Leonite, Emery and Lithium) have some obvious differences like chips, etc. The photo of Leucite has all the chips and parts just like my Mobo. This is 840 CPU compatible with this motherboard? Thank you all for your time.

  Luis, welcome to the forum.

  Here are the Specifications of the motherboard.

  I think you put the problem on the head.  You put new technology in old technology.  The computer is 7 years old.  There is a good chance that the extreme version is too powerful for the motherboard.  The specs do not mention the TDP, so we cannot necessarily determine whether it is part of the problem, also.  I don't think that we were still talking of TDP in 2006.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• Windows Media Center does not seem to recognize that I'm in the United Kingdom.

  I could not the skyplayer appears, and now I'm trying to get a video MSN to work but alas... No...

  Go into settings and download of updates does nothing.

  I went in the TV section and downloaded the settings of 5 MB, but it says the guide is not available and the icons are always for shows in the United States.

  I remember when I tried to get the skyplayer to work, I got as far as the discovery that this Media Center wouldn't recognize my location.

  There is some information herein, that will be helpful in your case is another question?

  Internet TV does not appear as an option in Windows Media Center
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/b4f9351d-4cb9-4493-97ba-baa26fcdc8e4

  Can't get internet tv
  http://www.SevenForums.com/Media-Center/32420-cannot-get-Internet-TV.html

  Cannot acess internet tv through windows Media Center 7
  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/2fe52acb-0655-48c5-9fa2-3da6cb6f94d4

  Try your luck here too.

  http://social.answers.Microsoft.com/forums/en-us/w7pictures/threads

• ccSvcHst.exe inhibits the CPU at 100% on XP Media Center 2002 (Service Pack 3). PC does not respond until the end of ccSvcHst.exe there domination of 30 to 90 minutes.

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  The list file you most often is a process associated with Norton 360. However, malware is sometimes assumed the names of the legitimate files in order to deceive the end user. Norton is a Devourer of known system and as a result, I wouldn't be surprised to learn that he is a legitimate file in your case. However, I recommend you download, to update and scan with Malwarebytes and Superantispyware, just to be sure. If the scans do not detect the file and the problem persists I would contact Norton or remove Norton making sure to use the tool to uninstall do.

  Malwarebytes.org

  SUPERAntiSpyware.com | Remove malware | Remove spyware - AntiMalware, AntiSpyware, adware!

  Sometimes to decide what battles to fight the toughest battle of all... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• XP Media Center Edition became totally unstable in the last weeks 3 - to ehrec.exe CPU usage spikes and it stops responding.

  I use this Dell original XPS systems is Windows XP MCE 2002 for 5 years now. The machine is fully patched and all drivers are up to date.

  A symptom is that it will start a program at 7:00 pm registration and registration of the status bar icon always displays this name of program even if by 21:00, it should have recorded 3 other programs and began a 4 t at 21:00. When it does this the minute 30 original program will be more than 2 hours of broadcast recorded on the original channel tuner would not turn stations by the configuration of the scheduled recording.

  ehrec.exe go out randomly to a State where it uses all the CPU resources available without using more memory or to all disk reads or writes. This will normally make ehshell.exe become desensitized and seem to be hung up in taskman. Doing an endtask on ehrec make ehshell to resume working properly. kill ehrec but may end up trashing all current record. I tried the solutions suggested on other forums (C:\Documents and Settings\All Users\Application Data\Microsoft\eHome\EPG purge and empty the E:\Recorded TV\TempRec directory), they have not helped and basically just made me have to reconfigure the program guide. I record only out of local air HD broadcasting stations.

  ehrecvr.log started the recording of these errors:

  [2010-07-14 22:14:52.357] CDigitalRecorder (0): GetVideoEncoder: could not get IVideoEncoder service provider. HR = 80004005
  [2010-07-14 22:14:52.357] CDigitalRecorder::Initialize: Get_Init failed 0x80004005
  [2010-07-14 22:14:52.357] CDigitalRecorder (0): initialize: adding Services
  [2010-07-14 22:14:52.357] CDigitalRecorder (0): AddServices: No. GLID Plugin corresponds to this recorder, 0 x 0
  [2010-07-14 22:34:02.691] CRecorder (0): FireTuningChanged:
  [2010-07-14 22:34:02.722] CDigitalRecorder (0): GetVideoEncoder: could not get IVideoEncoder service provider. HR = 80004005
  [2010-07-14 22:34:03.753] CRecorder (0): FireTunerStateChanged: 0, 2
  [2010-07-14 22:34:03.753] CDigitalRecorder (0): StartServices: impossible to get for recorder, 0 x 80004002 GLID.
  [2010-07-14 22:34:03.753] CRecorder (0): RunProc: could not start Services, 0 x 80004002
  [2010-07-14 23:00:43.984] CDigitalRecorder::ChannelAvailable - Pat is getting old by Mrs. 1047 table
  [2010-07-14 23:00:43.984] CRecorder (0): FireChannelAvailable (FALSE): 0
  [2010-07-14 23:20:54.120] CDigitalRecorder::ChannelAvailable - Pat is getting old by Mrs. 1062 table
  [2010-07-14 23:20:54.120] CRecorder (0): FireChannelAvailable (FALSE): 0
  [2010-07-14 23:35:19.469] CRecorder (0): FireTuningChanged:
  [2010-07-14 23:35:19.500] CDigitalRecorder (0): GetVideoEncoder: could not get IVideoEncoder service provider. HR = 80004005
  [2010-07-14 23:41:14.231] CDigitalRecorder::ChannelAvailable - Pat is getting old by Mrs. 1672 table
  [2010-07-14 23:41:14.231] CRecorder (0): FireChannelAvailable (FALSE): 0
  [2010-07-15 00:03:04.276] CRecorder (0): FireTuningChanged:
  [2010-07-15 00:03:04.276] CDigitalRecorder (0): GetVideoEncoder: could not get IVideoEncoder service provider. HR = 80004005

  I tried to apply again the Rollup2 patch that was published several years with the hope that run a subsequent manual WindowsUpdate would repatch all but which did not help. The machine has currently a Hauppauge WinTV 418 BDA Tuner (single channel HD) tuner card is installed. The machine came with an Angel TvTuner (dual channel analog) tuner card. I use the HD map for more than a year.

  I really don't want to move this machine to Win7, what other options can I try to do to return MediaCenter work properly again?

  Thank you

  DF

  DF

  I tried all the suggestions above and nothing seemed to clear up the same problem for me. Then I found this proposal it was v4 framework recently developed as a Windows update that may have broken my Windows XP Media Center Edition 2005 on my HP box. http://thegreenbutton.com/forums/p/91307/471286.aspx#471286

  I tried to uninstall the v4 of network and my Media Center works perfectly again since. Not sure if this is the only solution for the others, but of course, it worked on mine.

• Receiver error message: can't open messenger, when you try to play a DVD in Media Center Media center units.

  Original title: Media impossible Center of opn mesenger

  I have the DVD that I can play on non-microsoft program.

  When I try to play on Medis Centre I get a message;

  Cannot open messenger media center units

  Can you direct me. Shel

  See this previous discussion: http://answers.microsoft.com/en-us/windows/forum/windows_xp-tv/media-center-failure-messages/3962030b-76c3-4e51-a078-26322e702c06 (26 June 2010)

  Related...

  Windows Messenger in Windows Media Center error
  http://mymce.WordPress.com/2008/08/20/Windows-Messenger-error-in-Windows-Media-Center/

  Error Windows Messenger in Media Center Edition 2005
  http://blog.jasontsang.ca/2008/08/Windows-Messenger-error-in-Media-Center.html

• Windows Media Center almost completely broken and ehRec.exe take 50% CPU

  My windows media center is broken. Part, but probably not all, the problem is ehRec.exe uses up to 50% of the CPU, which means that it is completely connected because I have a computer with dual-core CPU.

  Do not record scheduled recordings. Sometimes, I can't even in media center. It becomes inadmissible. Usually just after a reboot, I can enter (which starts the record if we were waiting) but not if I first have to do other things. It seems that my media center just kaput.

  I got this incomprehensible message in the case where the application log

  The description for the event (0) in Source (Media Center Scheduler) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: unable to write the backup file...

  There is not any other journal entries of interest, with the exception of those who say that I started a record while the show was in progress. I get those now, when I start media center just after the restart, because he wasn't already record where it should be.

  EhRec.exe sometimes stop looping. Not this time. It was looping when I started to write this and it's always a loop.

  Is it possible to reinstall completely media library? I tried to run Setup, but it blocks half the time with ehRec.exe pounding to the CPU. I see that other people have the problem of ehRec.exe (beginning around mid-August), but it doesn't seem to be a real solution to this problem.

  Remove any recent update of microsoft .net framework. I had this problem several times. The first time, he ended up reinstalling the entire system. Although I suspect that the recent update of the .net framework is the culprit, I was not skilled enough to remove it first.  This time I look for answers elsewhere and no one really had a clue. Then I removed the .net framework 4 client update and voila, problem solved. I hope it will work for you, if you don't have not messed around first with other parts of the system too. I tried scannow /sfc solution, but really... This only works if you have the most recent operating system on the disk. Many have download updates, service pack, Microsoft and therefore, cannot provide a disk with the appropriate files. Anyway, it is not the solution. Apparently, the way of downloading these updates of .net framework is important. I don't know the solution for a correct installation of updates, but do not know that the 50% CPU problem is solved EVERY time, repealing the last update. Hope this helps someone. I have certainly spent enough time and lost enough when microsoft updates, disable the operation of my computer. Unfortunately, it's the solutions we try that sealed the fate of our readers. I lost 15mos of professional documents in my records of e-mail in September of my attempts stupid to solve this problem, after that a previous update of .net framework caused my duty reinsall windows.

• Windows media center xp 2005 with digital tuner units

  Windows media center xp 2005 will not see my digital tuner when I installed it.  I do not have

  an analog tv tuner.  Is it still a bug, or is there a solution for this.  Thank you

  That is right.  However, the United States and the Canada, MCE2k5 requires the installation an analog tuner.
  There is also no support for ATSC in Canada (IIRC), and MCE2k5 does not natively support the Clear-QAM (unencrypted digital cable) tuners.

  Could node busy, you give some details?  What country are you in, and is what tuner (s) you are trying to use?

  Respect,
  Chris

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Why is media center saying my dvd, s are not this country? they were purchased in the United Kingdom.

  I keep trying to play the dvd in my media center player, but a flag goes up to to say that they play in this country. I bought them to the United Kingdom!

  DVD is encoded with a "Region DVD". To check what you responds to go into Device Manager, select the DVD drive and check in system properties. License only 4 changes, so be very careful.