HP Mini 110-1034NR PC recovery partition

Similar Questions

• HP Mini 110 1034NR cannot access to bio, I don't know the password

  I have a HP Mini 110 1034NR Windows XP Home Edition

  I recently installed a new hard drive and had to start from scratch and install the operating system, drivers, etc..

  I went and download all the drivers from the website of HP drivers.

  Everything was find until I installed the driver of a Bio.  It restarts directly in the bios and the bios is locked by a password I do not know.

  I can't start again under windows and I don't know how to recover the password or reset it.

  I get the error message fatal after entering the wrong password 3 times.

  CNU9284KHD

  Can someone help me please?

  Hello

  Please be aware that this is not supported by HP.

  Try to enter: e9lo7uvszt (to be noted that the 3rd character is a lowercase L)

  Kind regards

  DP - K

• HP mini 110 cannot use recovery discs - BIOS insists the hard drive test failed. Drive works on another computer.

  My niece has a HP mini 110 that does not have a day. Do a check of the hard drive in the bios, it failed (7 on playback). I though I should get a new one so I ordered another. While waiting for that to happen, I had access to a usb SATA bridge and the opperating system was beyond repair and the unreadable disk from HP mini, I decided to try to repair the disk. So I reformatted the old disk using my desktop computer. Windows had no problem with the drive and it seems to work very well.

  I also had to order the recovery disks (intro to windows 7).

  In any case try to reinstall using the recovery via the DVD USB drive disks. It kept coming back with error 17 - I found a hard drive error. I also tried to install with a Windows XP installation disc and it was more explicit hard drive it said it had NOT installed it - or "it does not match the sheet material for unity" (or words to that effect)

  To get the new hard drive - the same problem. Even if both of these drives operate as USB connected to my main desktop drives. SO my conclusion is that the BIOS start inspect the hard drive, check the configuration of the formatting. that is the size and the partitions etc. and when they do not correspond to the idea of BIOS of good care he rejects the hard drive and finds it is not installed.  Or maybe to do some files on the hard drive of base. Whatever it is, the bios concludes that there is no hard drive and will always return a "failed" to the hard drive of the bios test.

  Any ideas on that? I need to know exactly which partitions are expected by the bios. Does anyone have these specs, or maybe you have a mini HP and can examine your hard disk and tell me the amounts of partition and the size?

  Unless I can get the bios to recognize the hard drive, I don't see how I can reinstall the operating system on it. Any help is appreciated.

  Thank you

  _______________________
  When it comes to fix computers the longest word in the English language is "JUST"... as in "you do just that and it will work" :-)
  _______________________

  HI David

  Well, I hope this is my last post here. I had already printed a return address for the recovery disks, being returned to the Netherlands. Just for the beggar of cast iron, however, I decided to try just once more would like to think that now that there is a kind of operating system on the hard drive it might work. But unfortunately still; no joy.

  All this time I would be considered may not be something wrong with the external hard drive because it was no problem to start the installation of XP. So I was just wondering maybe it does not receive enough power (it is a slimline portable DVD player that gets its power from a second usb) so I made a DVD player external adhock using an IDE hard drive enclosure (which has its own power supply and an old internal DVD burner I had put aside.

  To my surprise and joy; the HP mini started the recovery process. I am now watching reformat the windows partition and copy the files needed to restore the hard disk.

  So anyone with a similar problem to the HP mini not recognize the recovery disks is my advice; try an another external DVD drive, preferably one with its own supply of.

  Thanks for all your help and patience David.

• HP Mini 110 3103sl - factory (including partitions)

  Good day everyone. I use a HP Mini 110-3103sl for a certain period of time, so I decided to give it to someone who wants to sell it in my name.

  Before that, I wanted to restore it to its factory condition, so I pressed ESC at startup and consulted Recovery Manager. I don't remember the exact words, but I remember there were 3 options. None of them mentioned the word "factory" on this subject, so I chose the one that sounded more 'low level': the system recovery. It took a few hours I think. So I thought that I was done.

  It was yesterday. Today morning I gave her to the person responsible for selling it.

  Later I have to this topic and HP checked by support Web site to know that should have been 4 option instead of three. One of them should have been Factory Reset but I am absolutely sure that this option was not there yesterday. In addition, the support page says that System Recovery has just formats the partition to the OS without deleting other data in other partitions.

  Problem is that I had a score of personal data. I took it for granted that the system recovery would bring the PC to factory conditions, but now I'm not sure.

  From what I can remember the options were: restoration of the Microsoft, system recovery and Image recovery system reduces to a minimum. No factory reset (Please note that I am Italian, so was the language of options). I turned off when I was asked to choose a user name, so that the buyer could choose a.

  So... did the process remove my data partition personal or not? This computer will be in the hands of someone else, someone I don't know, so I need to know if I should try to get it back to format this partition.

  If you have win 7 on your PC, and you have selected "System Recovery" on the three options you have listed then it is done and you are safe...

  However if it was to Win XP and in as long as you mentioned was not partition recovery image, then you have to worry about it like a netbooks lighter with win WHAT XP had no possibility to restore to the factory like that...

  Also as you have been told you were asked to provide a user name... so most likely it is formatted...

  but once again... using the formats Recovery Manager only the C drive... so if you have created another partition, then it will be intact... ..

  recovery partition will not delete the partitions... only using recovery disks can do...

• HP Mini 110-1025dx: HP Mini 110 BIOS password recovery

  HP Mini 110 requires the BIOS password at startup. Like the netbook but cannot start. Pls help.

  Sytem stopped at CNU9315T9H. Thank you very much.

  Hello:

  Please read the first post on the link below for what to do with the system off (halt) code given by the PC.

  http://h30434.www3.HP.com/T5/notebook-operating-Sy...

• HP mini 110 current password recovery computer

  Hello. When I turn on my computer hp mini 110, it comes with (enter the current password) it has been sitting in my drawer for a couple of years and can not remember... After that 3 unsuccessful attempts, it shows what

  Password check failed
  Fatal error... system halted
  CNU9411N5M

  Can someone help please... Thanx

  Hello

  Enter: e9lov339q4 (3rd character is a lowercase L)

  Kind regards

  DP - K

• the Mini 110 bios password recovery

  Hi, I need a password for my mini 110 1030nr. Error code cnu9246cpq. Can someone help me please. Thank you

  Hello

  Please be aware that this is not supported by HP and try your hand at your own risk.

  Try to enter: e9lo7vge25 (to be noted that the 3rd character is a lowercase L)

  Kind regards

  DP - K

• HP mini 110 computer: password recovery

  Says to enter the current password, but I put it in three times and password verification failed fatal error... CNU9278JDZ. Can you help me please?

  Try > e9lo7xuwt0

  Are all lower case except digits 9, 7 and zero last

• HP Mini 110-1034 NR: password bios hp mini 110-1034 nr

  Product name: HP Mini 110-1034NR

  Operating system: Windows 10 Pro (32 bit)

  Hello

  Can U help me to the bios password my computer hp mini 110
  fatal error... system halted

  CNU9284PMB

  Thank you.

  @TritonT3

  Enter e9lo7uv24p (3rd character is a lowercase L)

  Kind regards

  DP - K

• HP Mini 110-3730NR, recovery partition deleted

  November 10, 2011

  I bought a HP Mini 110-3730NR laptop a few months back and I started to tinker a bit with it. I downloaded this software called CCleaner and I didn't know what disk wipe was (Yes, stupid me) well anyway, I accidentally erased my recovery partitions and all other files in the drive with it. It's a Windows 7 laptop with no. place to imput a CD. Is it possible to reverse what I've done without having to pay the $ 40.00 dollars more to get a backup thumbdrive? And could I may return it to the store because my warrany expires in September 2012? Please, it is perhaps one of the worst days of my life in more ways than one. Please, have some good news for me.

  Sincerely,
  Trisatan

  Hi, Trisatan:

  I'm sorry to say you are out of luck, and there is nothing you can do.

  If the store will resume, lucky you.

  If not, you can buy a set of recovery disks (if HP even them - I don't see that they do) and a DVD USB external drive to install with.

  Otherwise, you will need to purchase a full OEM or retail version of Windows 7.

  Paul

• HP Mini 110-3610se recovery Partition problem

  Dear HP technical team

  Hello. I have a mini laptop ' hp mini 110-3610se "and when I try to create a new partition in the c drive, I get an error and I can not do so get help from software"paragon partition manager"and I change my recovery to the logic partition and then do some activity by this soft ware and after restart my computer windows cannot start and I can not too F11 recovery and now I don't have windows and I don't have any recovery tools and system cannot work by recovery option.

  I know that my windows partition not damaged because I change it and I work on the recovery partition but my widows will not start.

  now, I can not access the hp suppurt group, please help and tell me what I can do?

  Make a Paragon partition manager boot disk, boot from it and undo the changes to the partition.

  or try this

  Use F8 to the beginning of the power up when you see the HP splash screen, that you get the advanced screen, select 'repair your computer' and press ENTER, once that loads of Windows recovery environment, select 'repair your computer' once again, if you get a dialog box on it to find problems and you want to repair say no.

  Once you get to the screen tools select Startup Repair, see if he can repair windows startup, restart when it is done, see if it will load windows now.

• Recovery Manager uninstalled on HP Mini 110-3131dx

  I accidentally uninstalled the Recovery Manager HP on my HP Mini 110-3131dx from my netbook has been slow.

  Now I'm trying to reset to factory settings and I'm not able to determine how to reinstall the Recovery Manager.

  When I start in using F11 Recovery Manager, all of the options except windows is disabled restore and restore windows has only recent restore points which are useless.

  Can someone indicate to me to the right link to download the Recovery Manager. I couldn't find installable upgrade

  Here are the specs you computer Netbook HP Mini 110-3131dx. According to the specification, this model left the factory with Windows 7 Starter 32 bit installed. HP provides no downloads of the HP Recovery Manager, HP Recovery partiton or HP recovery media. At this point, you have several options available to you;

  Backup all your personal data before all the instructions below.

  (1) Please mark the 'Active' HP Recovery partition by selecting "Mark Partition as Active" using the Windows Disk Management Console. See HP - partitioning and names of hard drives (Windows 7) for more information on using the Windows Disk Management Console. After your computer restarts, you should be presented with the option to return the computer to a factory condition.

  (2) Please use the support of HP recovery, you created earlier to return the computer to a factory State.

  (3) If you create this media, please see Windows 7 32 b recovery USB-Kit or contact assistance from official HP through the HP portal to support all over the world, to see if the HP recovery support is available for your computer.

  (4), if you can still read the Windows product key of 25 characters on the COA Microsoft attached to your computer, you can also install Windows 7 Starter by using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer. This method will not install HP customizations or value-added software and you will have to manually install all drivers of the PC HP Mini 110-3131dx drivers page.

  Windows 7 SP1 can be found HERE and HERE. (Download the Windows 7 ISO)

  Link to "ei.cfg removal utility" . (Download and use to allow you to install Windows 7 Starter)

  Direct link to Windows 7 USB/DVD Download tool. (Use to create ISO support)

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Recovery disc for Compaq Mini 110 c-1100DX

  Hello

  I contacted HP support several times over the past 2 years without success (a few times when I first bought this PC), so I thought I would try these forums.  I bought a Compaq Mini 110 c-1100DX with Windows XP a few years ago and wanted to create a recovery disc for it.  I followed the instructions, but I find that the typical HP, who is referenced in my manual, Recovery Manager does not exist.  HP support has confirmed this, but refuses to communicate any recovery disks support or operating system.  They said I could use the Roxio software that never worked to create or restore images.  I refuse to pay $16 for something my other HP computers 5 all allowed me to... create the factory recovery disks.  I have an external DVD burner, I have USB flash drives, and I have a desire to find a way to recover the original image.  I know that I can make an image of the disk because it is today, and I can use another software to create back ups.  I don't want to do that, I want the original image.

  Does anyone know of a place to download this image, a line of support that might be willing to send me the DVD recovery, or a way to connect with a more high level and preferably American, support staff?  I have 5 HP computers and printers HP 2, and I know the tech support/customer service line is a waste of time.  I'm good enough at the end of my rope with HP, and despite the fact that computers and printers have always been good support so so incredibly awful that I can't buy them more if I can't get this simple application is complete after 2 years of trying.  Any ready HP there at Carillon?

  For reference for anyone else having this problem (or any other issue, with the support of HP), I called 650-857-1501 (HP corporate), went to the business operator, explained my problem and the issues I had with the support of the founded India, she was very polite and transferred me to a very useful case manager named Emily and it solved the problem in 5 minutes.  I can't believe how much it was easy after suffering through hours and hours of race around the line of standard support.

• You place your order for recovery disc for mini 110

  Hello world

  first of all, I say this isn't really a laptop, I have a mini 110-3610sa.

  I've upgraded to windows 7 Professional to windows 7 basic, whatever he was going well until I stopped

  I lost the HP quick web and also the restoration of the factory, it goes to the windows recovery.

  can help you, I would really like to have fast web back it was very good and I was getting just configured with e-mails and fav sites.

  any help

  Ron tinydamed

  You can order recovery disks by following the instructions in the link below

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

• RECOVERY FAILED on HP MINI 110 (pn VK952EA #ABU)

  Hello

  My HP Mini 110 (Windows 7 starter edition) was running slowly, so I decided to use the valuation facility to return to factory settings.  Everything seemed to go well; I am as much as the screen "Setup is preparing your computer for first use", and then the Windows Welcome screen. But then the message "Windows cannot complete the installation. To install Windows on this computer, restart the installation"appears. If I click OK it disconnects and begins again, with the same result. So I crashed and tried to use F11 to start the recovery process, but nothing happens (by default in the attempt to load Windows, with the same error message).

  It was the first time I tried the recovery on this machine (although I did the same thing with success on other devices), and the edition of Windows 7 Starter has been as when buying.  There was a large number of Windows updates this morning before starting the recovery process (I was a little surprised at how long they took), but nothing else of note.

  Thanks a lot for any advice.

  Hi, Julia:

  I know it works because I have done it myself and made a bootable USB flash drive with the file.

  I think I can lead you down the wrong path...

  If the file is compiled correctly, you should get an option to install several variants of windows 7 and you select the one you want.

  I'm looking on the instructions, and what I did was to delete the IE configuration file in the sources folder and closed the file.

  I do not edit the file and then I used imageburn to create the ISO file.

  Follow these instructions...

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3827.2-1-4-deleting-the-EI-cfg-file-to-obtain-all-versions.aspx

  Paul