HP MIni 2102 WWAN swap help

Hey all,.

I have a HP MIni 2102, running Windows 7 Home Premium x 64, with a WWAN module running inside with the service through Verizon. The Mini is unfortunately unusable, but the hard drive and a WWAN module are always good. Is it not possible for me to buy a Mini netbook of the same exact model of work and simply swap the hard drive and a WWAN module? I want to maintain wireless through the WWAN card, but I don't know if additional configuration is necessary.

Obviously, since it's the same exact model, installation of Windows 7 on my current hard drive would have all drivers necessary to his right? And with my Verizon WWAN module would be able to detect my current settings, I can get online without hassle, as I did before that the netbook is dead? And I have to reactivate Windows again?

Any advice would be greatly appreciated!

"Violence is the last refuge of the incompetent." -Issac Asimov, from its roman Foundation.

You are the very welcome.

I think that the method would be perfectly acceptable as the replacement of a hard drive and reinstall the operating system using the key on the laptop is fine with Microsoft.

Paul

Tags: Notebooks

Similar Questions

  • HP Mini 2102: Exchange hard drive on HP Minis (2102/110-1025DX)

    I have two HP Minis; 2102 and 110-1025DX. Both are running Windows 10 Pro and were responsible for similar programs.

    For several reasons, I want to be able to swap hard drives between these two devices, but I don't know how possible it would be. My questions are:

    1. The OS Win 10 Pro would be recognized by the new devices? Should I just change the product key after permutation to "force" an acceptance?
    2. Drivers: I don't know how the pilots could be loaded. They both use the HP Wizard, I could simply run to load the best drivers?
    3. 'Detail' is my MS Office programs; one of my main goals is to move from Office 2010 Pro Plus to the other Mini, but I lost the installation media. I said that office 2010 Pro Plus cannot be downloaded from MS as other office products.
    4. All that I'm missing?

    Thanks in advance for help on this issue.

    If the two laptops are allowed to run Windows 10 i.e. are "activated" you should be able to swap hard drives. 10 Windows is enabled by Microsoft's servers and they must recognize that the host of transplant (I'll use donor and host to refer to the original computer that had the hard drive and the computer where he ends up, respectively) is OK to run Windows 10. Just to be safe, I would have the key for the handy host but you shouldn't have to use it. Drivers will probably not be a problem because all netbooks are essentially the same material. If you're worried, drivers for the host system are held in a C:\swsetup folder on the hard drive that you can copy to use if necessary in the host system after transplantation.

    The question is the activation of the Office program. I'm not too familiar with how the works of its licensing and activation but I think there may be a problem of EULA with you trying to do or copyright.

    You can buy MS Office 2010 Pro Plus for cost not much:

    http://www.eBay.com/ITM/Microsoft-Office-2010-Pro-plus-licence-key-download-link-digital-edition-/152244963867?hash=item237281ca1b:g:6xwAAOSwLnBX3Qgk

    http://www.eBay.com/ITM/Microsoft-Office-2010-Professional-plus-full-version-for-32-64BIT-D-L-key-/262623934769?hash=item3d259b3931:g:AwgAAOSwQNRXME2X

  • HP Mini 2102, wireless detects networks but does not connect

    Hi, I have recently reinstalled Windows 7 on my HP Mini 2102, downloaded this driver
    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 32...

    I tried to reinstall, but it still does not work.

    Finally solved the problem, I ran CNettoyez and deleted the registry who have not been used, worked like a charm and now I can connect wirelessly.

  • Need advice replaces the screen HP Mini 2102

    Hey all,.

    I'm fixing a netbook HP Mini 2102 which was abandoned on the ground. The netbook works fine, except that now the screen is a little blurry and washed on the right side. Generally, when a computer screen is upward, trying to replace the converter display card, as was the case with a machine to HP Pavilion dv9000 I fixed recently.

    However, after dismatling the computer, I found no such ups on the screen, and after consultation with an HP support assistant very useful during a session of live chat who informed me that it is not a separate inverter Board available for purchase, I have come to believe that I need to replace the entire screen.

    If I'm not mistaken, the LCD part number is 589649-001 for this particular model that I am repairing. I created this post to confirm that the ups on this Mini Board can be replaced, and I need to replace the entire LCD screen - less camera, bezel and hinge, which all work fine - in order to solve the display problem.

    If you have any other suggestions as to what part I need, or if I have to take a completely different approach to the repair, please let me know before ordering the part of LCD screen.

    "Violence is the last refuge of the incompetent." -Issac Asimov, from its roman Foundation.

    Hello

    You are right, you can save money simply select the good parts. I think not much.

    Good luck.

  • HP Mini 2102 not scroll

    When I started at the beginning using the mini 2102 scrolling worked. After windows and updated driver it stopped working. I did no scrolling and cannot find the settings for it. P/N is WZ293UT #ABA

    Hello

    Have you tried to use two fingers to scroll not one?

    If this still does not work then uninstall the current driver for Synaptics TouchPad and restart your system.

    Resources:
    Uninstall software in Windows 7

    Uninstall or change a program in Windows 7

    Download and install the driver Synaptics Touchpad here and restart again.

    Now you should be able to scroll with two fingers.

    If it still does not check your two fingers for scrolling is enabled.  Reach:

    Control Panel-> mouse

    Click ' device settings ' tab choose " Synaptics TouchPad " and lower, click on ' settings... '. In the list that will be there, select ' scroll '-> ' One - Finger scrolling ' and uncheck the box:

    • Allow vertical scrolling
    • Enable horizontal scrolling.

    Click on ' OK'.

    Then go to:

    Control Panel-> mouse

    Click ' device settings ' tab choose " Synaptics TouchPad " and lower, click on ' settings... '. In the list that will be there, select " scroll "-> " scrolling two - finger " and check:

    • Allow vertical scrolling
    • Enable horizontal scrolling.

    Click on ' OK'.

    If you want to use instead of two finger to scroll then after checking above suggestions, I think that thay you know what to change and how.

  • HP Mini 2102: updated HP Mini 2102 wireless card

    I want to upgrade the card (Broadcom 802. 11 g) Wireless N dual band card if possible. My question is; What is the right map and the part number?

    I believe that the HP Mini 5103 card will work in the 2102, but I am not sure of this ability. Anyone know the best wireless adapter card to redeem?

    Thanks in advance for any help!

    You definitely have a problem of white list and there are only 4 wireless cards that work in this machine. See p. 47 of the manual here:

    Manual

    They are all "N" cards and I think that the map you did a "N" not a 'G '. None, however, is dual band.

  • mini iPad 9.3 HELP!

    Hello! I've updated my mini iPad (first Gen only WiFi) 9.2.1 to 9.3... 2 days ago. But when I tried to open the ipad he asked me the apple id and password to activate. Of course there d did accept no id or spend... or everything I tried. In itunes, it pops up something like ([email protected]). My ipad was buyed legaly Flanco store (Brasov-Romania) in 27 April 2013.I have the certificate of guarantee and recipe. I don't know what to do because this device is now unusable. (excuse my English writing!)

    < image edited by host to remove the serial number >

    If you have an Apple Store or dealer, take the device, ID, and proof of purchase to get help fixing it.

  • Satellite A20-S103 WiFi mini PCI card need help

    Hello

    I own a Toshiba A20-S103. When I bought the camera there not of wireless. I have the switch but wireless. I would like to install it but I don't like solutions card mainly because of the portruding antennas and special care, I imagine that you must have for such a solution (do not break the card because of the carelesness). Now, I opened my laptop and I have the empty mini PCI slot and the antenna cables. I found several mini PCI card on the Toshiba site in the communication options and accessories section. The problem I have now is that although I found two mini PCI card 802.11a/b/g, which seems to be compatible with my model, I can't decide which is the best because the information provided for each of them are the same. The only thing that seems to be different is the reference number (PA3318U-2MPC and PA3298U-1MPC). Also, there is a two 802. 11 b / g cards compatible with my model but even once, I can't make my decision due to the fact that the information provided for these cards is not helping to distinguish between them. Looking in the manual, I found that my model suports only 802. 11a / b (or at least what they say). And there's a mini PCI 802.11 g on the Toshiba site which is not compatible with my model. If it makes me wonder if I can get a card 802.11 g. I would really like it for the higher speeds that it will support. I don't want to pay more money to use a PCI 802.11a/b/g only to discover that I can just conect to 11 Mbps and not 54 or so... Also, I found on the internet of the 802.11 cards g that promise speeds greater than 54 Mbps. Toshiba provides such a solution? If not, are there maps 802.11 g third-party compatible with my model? I hope that there is someone out there who can help me sort this mess.

    Hi Stefan

    It is not easy to give you a proper answer. In my opinion, it should work, but it is also important to install a suitable driver for the wireless card. I'm sure that it is possible to install the driver for another model mobile using the same wireless card. It will be perhaps better to contact the Service partner and ask them because they have such information and more experience with this sort of thing.

  • Compaq mini 110: I need help for Compaq mini password

    My Compaq mini says

    Password check failed

    Fatal error... System stopped

    CNU9405QW3.

    Please any help will be greatly appreciated.

    Thank you in advance.

    @rasfonzo

    Enter: e9lov1q5df (3rd character is a lowercase L)

    Kind regards

    DP - K

  • HP Mini 110: HP mini 110 enter password - help

    I can't unlock my HP Mini 110. I get the CNU938C0NQ error code. I tried other passwords that have been validated as being solutions, but also remove the battery, but they do not work. Your help would be very appreciated.

    Hello

    Thanks for posting in the HP Support forum.

    How about it > e9lofue195

    spells such as echo-9-love-oscar-fire-uniform-echo-1-9-5

  • HP Mini Bios Reset needed help please

    Hello

    I have a HP Mini and I need the password bios reset. I get a fatal error CNU9273NV5.

    Help, please

    Big welcome. Try.

    e9lo7xf96q

    Third letter lowercase l.

    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

  • HP MINI 110-1051tu: need help with password BIOS reset for HP MINI 110-1051tu

    Dear Sir.

    I have a HP Mini 110-1051tu laptop. After an abnormal stop when I turn on my laptop it asks 'Enter CURRENT Password. After using the ESC key three times on password enter CURRENT, an error pops up on the screen of the post.

    Password check failed

    Fatal error... System stopped.

    CNU93839TR

    Help, please...

    Thanking you.

    With respect,

    Castelbajac Saha,

    [Personal information]

    My note book details:

    Model: HP Mini 110-1051tu

    S/N: [personal information]

    P/N: VJ928PA #ACJ

    Hello

    Please try (all lower case)

    e9lofufoab

    Kind regards.

  • HP MINI 110: SOMEONE CAN HELP ME THE PASSWORD FOR MY HP MINI 110 COMPUTER CODE IS CNU92644HS PLEASE :(

    CAN SOMEONE HELP ME THE PASSWORD FOR MY HP MINI 110 COMPUTER, CODE IS CNU92644HS PLEASE

    CNU92644HS

    @JEYSON25

    Enter: e9lo7gvvzn (3rd character is a case of lwer L)

    Kind regards

    DP - K

  • HP mini 200 computer: need help windows of hp mini 200 7 - 32 bit

    I lost power to my laptop (hp mini 200, windows 7-32 bit), I didn't have the battery connected.
    When I start the computer it will not work and gives me the message. Saying the found boot device.
    Please indtall an operating system on your hard drive.
    hard drive (3FO)
    For more information, please visit:www.ho.com \go\techcenter\startup

    In the main bios HDD self-test menu shows there is no hard drive, memory test pass and click ok.

    I have the family photos and videos in this computer that I can't afford to lose.

    How can I recover my computer or the files?

    Help, please.

    Nharis

    It could very well be too late for photos and videos.  When a hard drive crashes, it is hard to say whether something can be salvaged or not.  The best bet is also replace the failed hard drive and on a work computer connect the player down with an adapter LIKE THIS.  Then boot from a Linux Live CD to examine the failed drive and move all the data to the CD/DVD drive Flash

  • HP Mini 210: I need help with my administrator password

    I need help with my HP Mini administrator password it says invalid password and it gives me a certain number of 66961328

    Hello

    Enter: 79649908

    Kind regards

    DP - K

Maybe you are looking for