HP Mini 2102 not scroll
When I started at the beginning using the mini 2102 scrolling worked. After windows and updated driver it stopped working. I did no scrolling and cannot find the settings for it. P/N is WZ293UT #ABA
Hello
Have you tried to use two fingers to scroll not one?
If this still does not work then uninstall the current driver for Synaptics TouchPad and restart your system.
Resources:
Uninstall software in Windows 7
Uninstall or change a program in Windows 7
Download and install the driver Synaptics Touchpad here and restart again.
Now you should be able to scroll with two fingers.
If it still does not check your two fingers for scrolling is enabled. Reach:
Control Panel-> mouse
Click ' device settings ' tab choose " Synaptics TouchPad " and lower, click on ' settings... '. In the list that will be there, select ' scroll '-> ' One - Finger scrolling ' and uncheck the box:
- Allow vertical scrolling
- Enable horizontal scrolling.
Click on ' OK'.
Then go to:
Control Panel-> mouse
Click ' device settings ' tab choose " Synaptics TouchPad " and lower, click on ' settings... '. In the list that will be there, select " scroll "-> " scrolling two - finger " and check:
- Allow vertical scrolling
- Enable horizontal scrolling.
Click on ' OK'.
If you want to use instead of two finger to scroll then after checking above suggestions, I think that thay you know what to change and how.
Tags: Notebooks
Similar Questions
-
HP Mini 2102, wireless detects networks but does not connect
Hi, I have recently reinstalled Windows 7 on my HP Mini 2102, downloaded this driver
http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 32...
I tried to reinstall, but it still does not work.Finally solved the problem, I ran CNettoyez and deleted the registry who have not been used, worked like a charm and now I can connect wirelessly.
-
HP Mini 2102: Exchange hard drive on HP Minis (2102/110-1025DX)
I have two HP Minis; 2102 and 110-1025DX. Both are running Windows 10 Pro and were responsible for similar programs.
For several reasons, I want to be able to swap hard drives between these two devices, but I don't know how possible it would be. My questions are:
- The OS Win 10 Pro would be recognized by the new devices? Should I just change the product key after permutation to "force" an acceptance?
- Drivers: I don't know how the pilots could be loaded. They both use the HP Wizard, I could simply run to load the best drivers?
- 'Detail' is my MS Office programs; one of my main goals is to move from Office 2010 Pro Plus to the other Mini, but I lost the installation media. I said that office 2010 Pro Plus cannot be downloaded from MS as other office products.
- All that I'm missing?
Thanks in advance for help on this issue.
If the two laptops are allowed to run Windows 10 i.e. are "activated" you should be able to swap hard drives. 10 Windows is enabled by Microsoft's servers and they must recognize that the host of transplant (I'll use donor and host to refer to the original computer that had the hard drive and the computer where he ends up, respectively) is OK to run Windows 10. Just to be safe, I would have the key for the handy host but you shouldn't have to use it. Drivers will probably not be a problem because all netbooks are essentially the same material. If you're worried, drivers for the host system are held in a C:\swsetup folder on the hard drive that you can copy to use if necessary in the host system after transplantation.
The question is the activation of the Office program. I'm not too familiar with how the works of its licensing and activation but I think there may be a problem of EULA with you trying to do or copyright.
You can buy MS Office 2010 Pro Plus for cost not much:
-
Pavilion dv7: Hp Pavilion dv7, synaptics pointing device do not scroll after windows 10
After the upgrade to windows 10 my mouse does not scroll. I've updated the driver, without help. I uninstalled and reinstalled it, no help. I drove back from the driver, any help, I don't reupdated the driver no help, I deleted the system whole synaptics and it not redownloaded from their Web site, no help, updating the driver again, no help. I then went live... help the technician did an update again... without help. I went to the live help again and technician did a cleaning/repair of the system from the command prompt, no help (I then abandoned with live help) and yes the scrolling option is checked in the settings. Please can someone help me.
abracadbra ive got mine working! is a long time try this then try to stay with me and forgive me if I get a lil confusing...
go to your add/remove programs and remove the synaptics program
you have to restart... it will say: it will not work or possibly used... your fixed points of the mouse and click on
Once it's done and your back on the desktop click your search in the web area and windows at the bottom left at the beginning
type restore and click on Recovery Manager
under I need help immediately, click the driver reinstall (second option down in the first column)
follow the signs from there
or sorry for instructions long but you can also use the hp support assistant, click diagnostics and tools, keyboard and mouse from the evil that pulls up which one is troubling you and it gives you a way I tried and did not work so I said no and he gives me the second option which is above... Please let me know if it works for you...
-
Need advice replaces the screen HP Mini 2102
Hey all,.
I'm fixing a netbook HP Mini 2102 which was abandoned on the ground. The netbook works fine, except that now the screen is a little blurry and washed on the right side. Generally, when a computer screen is upward, trying to replace the converter display card, as was the case with a machine to HP Pavilion dv9000 I fixed recently.
However, after dismatling the computer, I found no such ups on the screen, and after consultation with an HP support assistant very useful during a session of live chat who informed me that it is not a separate inverter Board available for purchase, I have come to believe that I need to replace the entire screen.
If I'm not mistaken, the LCD part number is 589649-001 for this particular model that I am repairing. I created this post to confirm that the ups on this Mini Board can be replaced, and I need to replace the entire LCD screen - less camera, bezel and hinge, which all work fine - in order to solve the display problem.
If you have any other suggestions as to what part I need, or if I have to take a completely different approach to the repair, please let me know before ordering the part of LCD screen.
"Violence is the last refuge of the incompetent." -Issac Asimov, from its roman Foundation.Hello
You are right, you can save money simply select the good parts. I think not much.
Good luck.
-
BlackBerry 10 Q10 Message text box does not scroll past two lines
When you type a message in the message text box, the text does not scroll to the 3rd entry line until the line is completed. I find myself typing blind to line 3 of my message until the line 3 is full... then it scrolls to the top and becomes visible in the message text box. Any suggestions?
Had the same problem. You must have changed the font size of your device to a point 10 or above fonts. If you set it to original font size which is 8, it works perfectly again. IHAVE that mine now set at 9 and it the text field scrolls correctly now. It must be a bug in Blackberry software so if you read these messages please fix it as I'd rather watch 10-point font.
-
Hey all,.
I have a HP MIni 2102, running Windows 7 Home Premium x 64, with a WWAN module running inside with the service through Verizon. The Mini is unfortunately unusable, but the hard drive and a WWAN module are always good. Is it not possible for me to buy a Mini netbook of the same exact model of work and simply swap the hard drive and a WWAN module? I want to maintain wireless through the WWAN card, but I don't know if additional configuration is necessary.
Obviously, since it's the same exact model, installation of Windows 7 on my current hard drive would have all drivers necessary to his right? And with my Verizon WWAN module would be able to detect my current settings, I can get online without hassle, as I did before that the netbook is dead? And I have to reactivate Windows again?
Any advice would be greatly appreciated!
"Violence is the last refuge of the incompetent." -Issac Asimov, from its roman Foundation.You are the very welcome.
I think that the method would be perfectly acceptable as the replacement of a hard drive and reinstall the operating system using the key on the laptop is fine with Microsoft.
Paul
-
Hello
I'm trying to fallow this great tutorial, but I'm still stuck on this one part. Here is the link for the video
http://www.tutvid.com/tutorials/flash/tutorials/scrollingThumbs.php . I'm able to do everything very well until the part where you make the thumbnails do scroll through and stop when the mouse passes over it. Mine does not move. I feel like I'm everything he says, but still I can't understand. It's so frustrating! Help, please! Thanks in advance,
Meegan
you will be able to use what you learned or developed from this first tutorial. but the key on scrolling thumbnails part you will need to learn from another tutorial.
-
10 iOS safari screen do not scroll when you type text
After the iOS10 update, Safari is not scroll when I m typing text in a field text as here in a forum. I have to scroll the screen by hand for the position where type I´m. it occurs only in Safari, for example Pages works fine.
I use an iPad Air1, but have the same on my iPhone running iOS 10 6.
Is there any solution for this? Thank you.
Hello Toy4ever,
Thank you for reaching out to the Community Support from Apple. I know how it is important to be able to effectively tap on your iPad, and I want to help you get things working again.
What I would recommend starting with a reboot of base and if the problem continues, you can reset the settings on your iPad. Despite the fear two-step attention, this does not affect your data. All of your content will remain intact.
You can always save your settings in iTunes or iCloud data before doing this reset. This link will guide you through backup if you choose to do so: https://support.apple.com/en-us/HT203977
What this does is actually reset some of your settings to factory default. This removes all data and applications, photos or contacts, but it removes all of your preferences for the Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, contact ID, brightness & wallpaper and privacy, so we will have to define these things upwards after this reset.
Do this please go to settings > general > reset > reset all settings.
If the problem persists, the entire community is here to help.
Best regards -
New iMac out of the box. The Magic trackpad is not scrolling. Tried all the settings in "trackpad" in system preferences.
Any suggestions?
Thank you
If you have followed the instructions here, your trackpad should work fine. Have you seen this document? If this isn't the case, follow what he says, and then tell us what happened.
-
I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.
Could you please include screenshots of the so-called issue?
-
IPad Mini will not connect to WiFi
My IPad Mini does not connect to my WiFi at home. All other devices in the House are connected correctly. It seems that my IPad Mini or the router. I was working well until that Friday. I have reset the router and the IPad Mini, forgotten network, rebooted both, and nothing seems to work. Any further suggestions?
I suggest to do a hard reset (hold home and power button at the same time) If you have not already tried it. That's worked for me before when nothing else has.
-
How to burn DVD when my Mac Mini is not a taken SuperDriver support
I made iMovie project. When I wanted to create iDVD project I received a message < Your Macintosh has not have supported SuperDrive. Please note that while you will be able to work with the iDVD project, you will not be able to burn a DVD disc >
OS X El Capitan
Mac mini (late 2014)
Processor 3 GHz Intel Core i7
16GB 1600 MHz DDR3 memory
Iris 1536 MB Intel graphics card
Any body knows how to burn DVD when my Mac Mini does not support SuperDriver.
Thanks in advance
Prangins
- Purchase an external optical drive
- borrow an external optical drive
- get use to another Mac equipped with an optical drive
-
The selection of text on a page of the screen when the cursor reaches the lower edge of the screen in Firefox (version 9.0.1) does not scroll. Other programs (including IE) do, so it doesn't seem to be a local computer problem.
I don't see a setting in the page options that enables / disables this then what is the solution?Activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).
-
My Ipad mini will not connect with my wifi at home. Other devices are connecting with the wifi at home. I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password. Help! It was working fine earlier in the day.
What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all
If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network
Maybe you are looking for
-
parts of screens are painted slowly or only appear after pressing PAGE UP, PG. Prev. Sometimes parts of screens are blackened (see my attachment)
-
I can't have any of my programs or Apple appps and I definitely want to remove firefoxand go back to the way it was.
-
Satellite 320CDT: this disc is compatible?
Hi allI know it's old, but I have a Toshiba 320CDT which has a dead CD-ROM drive (unless it is very good)The mounted is a TEAC CD-220EA-32 (X 20)Can someone tell me if a TEAC 224th P / N 1977047 A-30 fits in replacement. It is 24 X drive. Thank you v
-
Pavilion 15-ac027tx: I can't get the graphics driver amd
I can't get the graphics driver amd please help me to download I tried a lot of things to download this driver in hp drivers website.but it gives 404 not found... Please help me...
-
media control devices... (mci) midi sequencer... Properties... (No devices)... ! XP Home... SP3... Re-installed last Realtek audio pack (sp26552.exe) No hardware conflict, devices activated, control of the Volume number, number Sytem sounds, etc... !