HP Notebook PC Windows 8.1 15 automatic brightness

Similar Questions

• Pavilion g7-1365dx notebook pc, windows 7, rebooted itself

  Pavilion g7-1365dx notebook pc, windows 7, restarted itself without apparent reason (both terrible!). There was no place or by downloading or anything else to precipitate a reboot. How tp prevent in the future?

  Hello

  Please find the steps below may help you solve your problem.

  Click Start, then control panel. click on system and security link. Click on the System link. In the left pane, click Advanced system settings locate near the bottom of the window and click settings in the Startup and recovery section. In the startup and recovery window, find and uncheck the checkbox next to automatically restart. Click OK in the startup and recovery window. Click OK in the System Properties window.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• New e-mail window no longer opens automatically (as previously)

  I've upgraded to the latest version of Thunderbird about 4 weeks back. (Don't know which version I used).

  Since then the new e-mail window does not open automatically when I seek to determine the folders and decide to do a right click on a file and select: SEND TO, and then select: RECIPIENT of the MESSAGE. Thunderbird only opens, but that's all.

  Other programs that is also used to automatically open the new e-mail with an attachment, window does not work either.

  Previously a window writing a new Email automatically open with the file selected, attached, followed by Thunderbird opening.

  How can I get this behavior again.

  Went internet and downloaded a version more old 33.0 Mozzila Thunderbird.

  Now the problem is solved and it works again.

• How to make more old Hoyle and broderban card games to work in mode full screen on my Sony notebook with Windows 7

  How to make more old Hoyle and Broderband card games to work in mode full screen on my Sony notebook with Windows 7

  Hi Gary,.

  1. what version of Hoyle card games you try to play?

  Try the game in compatibility mode. To install the software in compatibility mode

  1 right click on the Setup file, and then selectProperties.

  2. click on thecompatibility tab.

  3. incompatibility mode, check the run this program in compatibility mode for: option.

  4. Select one of the following operating systems:Windows 98/Me/XP/2000 , from the options offered.

  5. click onapply and OK.

  See the link below for more information on compatibility mode:

  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem is only with these games you may need to contact the manufacturer about this issue.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• I would like an option that reads 'check at startup' on when windows 7 checks the automatic updates.

  I would like an option that reads 'check at startup' on when windows 7 checks the automatic updates. Some people still turn off their computers when you are not using it. And if they do not check to turn on, they will begin the navigation with an operating system up-to-date. This option exists? I have not found. Thank you

  If check you the Manager of tasks shortly after starting your computer (or restart), you will notice that automatic updates (WUAUCLT. (EXE) is "check-in" with the update servers!

  Update Windows FAQ
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Why does'nt windows developed defender running automatically with windows 7?

  Why does'nt windows developed defender running automatically with windows 7?

  Hi GRL999,

  Welcome to the Microsoft Answers site.

  You can add, delete, enable, or disable a startup program in windows 7. Follow the steps mentioned below.

  Method 1:

  1. open the settings menu of the program.

  2. Add the program to the startup -

  Select the type option to run at startup of the program.

   

  3. to remove the startup - program

  Deselect the option type to run at startup of the program.

  Method 2:

  1. right click on the exe of the program to run at startup, or opening at startup and click create a shortcut.

  NOTE: This is the shortcut you add to the folder of boot Option one or Option two below. Skip this step if you only remove a shortcut from the startup folder.

  Single user:

  NOTE: The startup of the single (current) user folder is a hidden phone folder to the:
  C:\Users\(user-name) \AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup

  2. open the Start Menu.

  3. click on all programs, right-click on the Startup folder and click Open or Explorer or in the line of the Start Menu search box, type : startup of the shell and press enter.

  4. to add a startup program or file shortcut - drag the shortcut created in step 1 in the startup folder and drop it.

  5. to remove a boot program or file shortcut - right click on the shortcut in the startup folder and click Remove.

  6. close the startup folder when finished.

   

  For all users:

  NOTE: The startup folder all users is a hidden system folder:
  C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup

  2. open the Start Menu.

  3. click on all programs, right-click on the Startup folder and click open all users , or to explore all users.

  4. to add a startup program or file shortcut - drag the shortcut created in step 1 in the startup folder and drop it.

  5. to remove a boot program or file shortcut - right click on the shortcut in the startup folder and click Remove.

  6. close the startup folder when finished.

  Method 3:

  1. open the Start Menu.

  (A) in the search line, type msconfig and press enter.

  or

  (B) open theControl Panel (all items view) and click the Administrative Tools icon, and then click System Configuration. Close the control panel and the windows administrative tools.

  2. If prompted, click on continue for UAC prompt or type the administrator password.

  3. click on the Startup tab.

  4. to disable a startup - program

  (A) select a listed startup program and uncheck the box.

  (B) repeat to disable more listed startup programs.

  5. to allow a startup - program

  (A) select a listed startup program and check it.

  (B) repeat to allow more listed startup programs.

  6. to turn off all startup programs listed -

  (A) click the disable all button.

  (B) proceed to step 9.

  7. to enable all startup programs listed -

  (A) click the enable all button.

  8. click on apply and OK.

  9. click on the button to restart to apply.

  Note: This will restart your computer immediately. Save and close everything you are working on the first.

  For more information about Windows Defender, see the items listed below.

  Enable or disable the Windows Defender

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Defender-on-or-off

  Enable or disable the Windows Defender real-time protection

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Defender-real-time-protection-on-or-off

  Schedule when Windows Defender scans your computer http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-when-Windows-Defender-scans-your-computer

  Using Windows Defender

  http://Windows.Microsoft.com/en-us/Windows7/using-Windows-Defender

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Internet Explorer opens automatically at startup of the Facebook page

  I use Windows Vista Home Premium software on a Gateway computer. For some reason any start-up, my Windows Internet Explorer is automatically upwards, and there a Web Facebook.com page already on the screen asking you to sign up for Facebook. It flashes at the bottom of my screen until I click on it. I don't want no internet will automatically launch and I want either of Facebook. How can I keep internet start automatically without my even clicking on it? Thanks for the help.

  Dear Rachel,

  Please, try the following steps.

  (1) check that the homepage of your Internet Explorer is not "facebook.com" - could be found under Tools-> Internet Options-> general, in the section "Home Page." If you do not have "facebook.com" written there, replace it with another site that you want to load when you start your browser or with "subject: empty ' If you just want a blank window is displayed when you run your browser.

  (2) on your Start menu, choose programs-> startup programs list. If "Internet Explorer" is in the list, just simply delete.

  ((3) if (2)) does not help, try running 'msconfig' (choose Run from the Start Menu and just type "msconfig" in the window that appears), go to "Startup" and uncheck a box near point "Windows Internet Explorer".

  I hope this helps!

• Windows help to launch automatically, how to stop it?

  Original title: launch windows help

  Using windows vista, just reformatted and reinstalled, now help windows continues to launch automatically, how to stop it?

  Windows help usually starts by itself means that the F1 key on the keyboard is blocked. Can you try unplugging the keyboard and watch for a few minutes see if it happens without the keyboard?

• Why my Windows defender updates itself automatically? I last updated and also I do not Windows update to automatically install updates.

  Why my Windows defender updates itself automatically? I last updated and also I do not Windows update to automatically install updates.

  Hey open58,

  Follow this link here to understand why Windows automatically updates itself, even if you do not assign it. I'm a bit confused about your real question so if it is not answered please just ask him one more time and I'll try again.
  Thanks for posting of Microsoft Answers!

• Upgrade of RAM and windows stops and restarts automatically when it tries to load.

  I recently updated my computer running:

  Motherborard: ASUS Crosshair V Formula

  Graphics card: MSI R6970 lightning (2 GB dedicated DDR5)

  RAM: 2 x 4 GB Corsair vengeance 1600 Mhz

  I have another 2 x 4 GB of ram and have tried loading windows vista ultimate 64-bit with installed, the configuration of the bios recognizes that the ram is present, however, windows crashes and restarts automatically when it tries to load.  Any suggestions on how to get this extra memory working out to change my Linux operating system?

  Thank you

  Chris

  Hi Chris,

  You can try to connect a single stick of RAM at a time and see what happens.

  If you are not facing problems, then try to swap the RAM sticks and check for the issue.

• Windows Firewall turns off automatically.

  Windows Firewall turns off automatically at startup, sometimes. I use Trend Micro Internet Security and Windows Security Center. They both have a firewall. (1) I always here you can only have one firewall at the time, is why that Windows Firewall turns off sometimes? (2) if so, why only sometimes? (I don't have Windows OneCare.) (3) should I manually turn off the Windows Firewall and just use the Trend Micro firewall? (4) that I will protect? Please answer 4 questions.

  I'm sorry, I wasn't clear enough in my question. I'm not asking for possibly a recommendation on what AV I have to use. I know not if I have to choose only one I'll choose Trend Micro. I wanted to ask what is the right way to turn off the Windows Firewall and make sure it stays off. When I open the Windows Security Center it shows firewall as YOU, but she does not have an option to OFF.

  Start button > in the search box, type windows firewall > look up, click onWindows Firewall > in the left column, click turn on or off Windows Firewall > the rest is self-explanatory.

  t-4-2

• Windows Photo Gallery. How can I change the settings in the Windows Photo Gallery to automatically open the image without going to the index first?

  Windows Photo Gallery.  How can I change the settings in the Windows Photo Gallery to automatically open the image without going to the index first?

  Additional information: there are 2 computers that I use on the first Gallery Photo of Windows will open the image and allow me to use the left and right buttons to scroll through the rest of the photos in the folder, that's what I want.

  On the 2nd computer when I open an image it will open the Windows Photo Gallery in an index with thumbnails of the displayed record.  How can I change so that it opens the same thing as the first computer?

  I did the following on both computers; Right-click on the image and select open with...--> choose the default program--> go--> Program Files, Windows Photo Gallery, but it will be open always differently on computer 2.

  Both computers use Windows Vista 32-bit.

  Thanks in advance.

  Australian salvation,

  This would happen if the file associations are corrupted on the computer, try method to set Photo Gallery Windows as the default program for opening files jpeg or png below image types.

  (a) open default programs by clicking the Start button, click default programs.

  (b) click on associate a type of file or Protocol with a program

  (c) in the following list of file protocol search jpeg and make sure that you have associated with the program that uses it and then check if it works.

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is someone can you please tell me how I would get my Windows Vista calendar opens automatically when starting my computer to the top? Thank you!

  Is someone can you please tell me how I can get my windows vista calendar opens automatically when starting my cpu to the top? Thank you

  Put a shortcut to the calendar program in your startup folder:

  1. Click the Start button.
  2. Click Open .
  3. Double-click programs .
  4. Double-click Startup .
  5. Click the Start button.
  6. Click on all programs .
  7. Right-click Windows Calendar , hold down the button, drag it in theStart window and let go.
  8. Click copy here .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Windows will not stop automatically as it has done for years. What is going on???

  I have to say?  I already said repeatedly that WINDOWS is STOPPED NOT AUTOMATICALLY ON MY COMPUTER BECAUSE IT has FOR AS LONG AS I'VE BEEN ALIVE, WHO IS NOW EIGHT DECADES.  WHAT ELSE DO YOU WANT?  WHAT ADDITIONAL OBSTACLES HAVE TO JUMP UNTIL I CAN GET A SIMPLE ANSWER OR SIMPLE HELP?  WHAT HAVE I DONE IT SO HORRIBLE IS THAT OF A SUDDEN WINDOWS IS LIKE THAT.  I'M A COOL GUY WITH SIMPLE NEEDS, BOTH IN LIFE AND TECHNOLOGY.

  Hello

  Please do not type in capital letters as it is difficult to read and considered to be shouting.

  ---------------

  Check your antivirus/antispyware/security programs as a possibility. Especially if they check
  removable drives on shutdown. Sometimes it takes actually uninstall it to see if
  they are part of the issue (and controls removable drives are not the only symptom these)
  can cause). Not having not more than one program antivirus/security, all on the same system if
  used, and uninstall them can leave problems causing remains.

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ----------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• stop the windows media player to automatically go into full-screen mode

  How can I stop windows media player to automatically enter full screen mode whenever I have to read a DVD.

  There was an error in the original question - it should have read "whenever I have to Insert a DVD.   In any case I solved this problem of turing option to automatically read the DVD under Autoplay

  That answers my question.   However since I can not mark my own responses posts I would be very grateful if a community moderator would mark this message as a.