HP Officejet 4620:4620 will connect to the motorola sbg6580, IP address but cannot be contacted (?)

Similar Questions

• The airport will connect to the brother 2270DW via USB but not ethernet

  Apple replaced my Airport Extreme after only 9 months and it has been quite a challenge to get back to square one.

  On the older airport, I connected to my printer wireless Brother via an Ethernet port on the router, but now it does not detect the printer. I changed the cables without result. I have finally connected via USB to the airport and wireless printing is restored, but why didn't he see my ethernet port.  The port works because I am connected via a cable to my laptop and it lights up. I have a problem with the port or printer?

  He does not see my printer via ethernet. What gives?

  Thank you

  Alexander

  You have entered the system preferences in printers and Scanners and added to the printer?

• Wireless connectivity problems: Windows Vista displays connected to the internet with good signal, but cannot access the internet more than a few seconds.

  Hello

  Recently, I brought a Dell with Windows Vista and a Belkin Wireless adapter in my house somewhere else. The computer has never had problems connecting to wireless internet on the other networks, however since the move I was not able to access the internet. Sometimes the network shows only a local connection and not Internet and other times, the network has a strong signal, a network identified and even an internet connection, but when I open any browser, it is only able to load the Google homepage and I cannot navigate anywhere else. I turned off all firewalls and even uninstalled all 3rd party software protection. I checked all my browser settings and made sure they detect automatically the IP settings and proxy settings. In other words everything seems in good shape, but I still have no navigation capability. Any ideas?

  It turns out that I had to remove all the old Wireless USB software that had been used previously (there had been other versions of Belkin and Linksys). I then used the computer from my friend to download suitable driver on the Belkin site for the internet adapter USB I used and BAM.

• I can connect to the internet through my browser, but cannot connect to an application based on a cloud

  We operate Windows 7 Professional and that you can access the internet via Google Chrome normally.  However, our hotel based on a cloud, RoomKeyPMS, property management system does not connect to our main office desktop (wired LAN connection).  We are able to connect to another computer on desktop (wired LAN connection) and a laptop computer (wireless connection).  All three machines access the internet through the same network.

  Apparently, there is a setting in the office that prohibited RoomKeyPMS to connect to a machine.  Can someone point me in the right direction to solve this problem?

  Hi Glen,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• Agent using which the user will connect to the file server?

  Hello

  We have installed odi stanalone agent on the file server. This autonomous agent using which the user will connect to the file server?

  Thank you

  Kondo.

  The user who started the agent in this server.

  Thank you

  Chantal

• Windows cannot access \\RIPSERVER. You are not allowed to access \\RIPSERVER... I can see the \\RIPSERVER on my network but cannot connect.

  Windows cannot \\RIPSERVERaccrss. You are not allowed to access\\RIPSERVER... I can see the\\RIPSERVER on my network but cannot connect. I'm running with 3 computers XP Pro windows SBS 2003 domain and a Windows 2000 (\\RIPSERVER) runs a computer to plate system that I use every day. I just added a new computer Windows 7 Professional and can see everything on the network (domain), I can access the server drives (where we keep the file sbs 2003), but when I click on the\\RIPSERVER I get error (cannot access...) If I do the same with any of the XP computers that he connects very well. Please help as I cannot connect I have to make my new computer an XP and I wanted to start to learn the Windows 7 operating system. Please let me know if you need more information on my systems.

  Thanks in advance for your help.

  Hi RC383,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum.

  Link, please refer to:http://social.technet.microsoft.com/Forums/en/itproxpsp/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP8500 A909A, the installation program recognizes printer, but cannot connect

  HP8500 A909A, the installation program recognizes printer, but cannot connect

  Ok.

  It is installed by USB on the other printer?

  Did you share the printer?

  have you set up a virtual usb port?

  Have you tried to use the diagnosis of HP printer installation utility to help Setup and configuration of your printer?

  It would have been simpler to use the LAN connector so the other PC online would not be a condition for its availability.

  (1) connect the printer with the LAN connector to your network switch or router and turn it on.

  (2) make sure that the IP address of the printer is your network subnet via the embedded Web server or printer print Panel menu.

  (3) set it up as a network on all PCs compuuter to make it available for use

• Can connect to the server (although very slowly) but unable to connect to the internet

  Original title: network connectivity

  I have a user who has been connected to the internet through our SBS server.  All of a sudden, it can connect to the server (although very slowly) but unable to connect to the internet.  The network and sharing shows that it is connected to a public network not by the domain server.

  I hooked another computer for network wiring and it worked fine.  I changed the wiring, and it still doesn't work.

  Any ideas?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• A general error occurred: could not connect with the password of administrator of vim cannot configure VIM account on the host

  Community salvation.

  Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...

  A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.

  Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found

  I searched and found several articles with similar questions, so I chose a course of action

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1007132

  http://communities.VMware.com/message/1168241

  As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.

  So - my first actions were to disconnect and reconnect one of the hosts.  The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.

  Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.

  Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.

  If - goes here - any ideas? I can give other details or screen caputres

  ESX3:

  #%PAM-1.0

  1. Automatically generated by esxcfg-auth

  /lib/security/$ISA/pam_unix.so account required

  AUTH required /lib/security/$ISA/pam_env.so

  AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok

  AUTH required /lib/security/$ISA/pam_deny.so

  attempts at password required /lib/security/$ISA/pam_cracklib.so = 3

  shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok

  /lib/security/$ISA/pam_deny.so password required

  session required /lib/security/$ISA/pam_limits.so

  session required /lib/security/$ISA/pam_unix.so

  ESX4

  #%PAM-1.0

  account required pam_per_user.so /etc/pam.d/login.map

  AUTH required pam_per_user.so /etc/pam.d/login.map

  /etc/pam.d/login.map pam_per_user.so password required

  /etc/pam.d/login.map pam_per_user.so sign in required

  -KjB

• installed Acrobat DC and get the error indicating the serial number is valid but cannot find any product calling on my computer

  installed Acrobat DC and get the error indicating the serial number is valid but cannot find any product calling on my computer

  As indicated, with an upgrade (apparently what you bought) you will get a request for both the new S/N in the old S/N - assuming that a qualifying product is not installed).

• I need to enter my billing address, but cannot select my country in the menu dropdown.

  I'm trying to upgrade a free membership to the membership of the only application on the Adobe web site. When I get to the point to get into the details of my payment, I asks me to enter my billing address, but cannot select my country in the menu dropdown. The only option I get is "Singapore" that I live in Hong Kong. How can I fix? This prevent me to upgrade my membership.

  I found a way around the problem by using PayPal.

• HP Officejet 4620 is disconnected from the network, how to re - connect?

  I went through all the troubleshooting steps, I turned it switch on the computer power. All my other devices are connected to the network very well except for this printer. It is less than 2 months old and has worked fine since I got it and I not made any changes to anything.  He only stopped to be connected.

  I'm so frustrated... Please help?

  In order to re - connect the printer to the network, you will need to plug in your USB cable.

  1. click on Start Menu

  2. Select all PROGRAMS

  3. choose the HP folder

  4. go to Officejet 4620

  5. add printer or software product Setup &, it should give you option (convert USB wireless).

  With this printer, you need to install the USB printer first, and then convert it to wireless.

  Let me know if this can help, thank you.

• OfficeJet 4620 - will be not printed black - HELP!

  I have an Officejet 4620 and the printer doesn't print black ink.  Other colors print fine.  After spending $ 65, I've replaced the ink cartridges, and it would not print!

  I found the link to ""printer prints a blank Page or print no black or color ink for HP Officejet 4610, 4620, Deskjet Ink Advantage 4610 and 4620 e - all-in - One Printer Series " and followed all the instructions, TWICE, if not three times! "

  I also cleaned the printhead several times, two rounds each, and again, it will not be printed.  What to do is print the calibration reports that continue to eat my ink!   Printing reports colored pieces, but nothing in BLACK!

  This seems to be a very common problem with these printers because I have read several forums that describes the same thing, and HP does not seem a good solution or offer of difficulty or the problem.  I noticed most positions with this question end up making a private offline message.

  Before I wonder, the printer is no longer under warranty and I live in the United States.  PLEASE HELP ME!

  Hi @VetteGuy,

  Welcome to the HP Forums!

  As you have provided all the relevant information, I need to give a hand, I'll go and send you a private message to discuss the next step from here. If you are unsure how to check your messages on the forum this post, has instructions

• Printer Officejet 4620: Officejet 4620 wireless connection problem

  I have just moved house and have a new wifi connection/router.

  My HP Officejet 4620 shows network status in offline mode on the network configuration report. On the connectivity report, he discovered the new wireless connection but does not seem to have really connected to it.

  I have restored the wifi settings to their default settings of the printer, but I don't know what to do in order to get the printer to connect to the new network.

  Please can someone help?

  I appreciate any help you can offer, thank you.

  Replacement/change your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• HP Officejet 4620: can not see the download link on the HP support Web page to download the driver for HP JO 4620

  Hello. Please help me I have been stuck for days.,

  I have a HP Officejet 4320 and I have in the past to the web page of the HP support and downloaded the driver so that I can install it a printer.  When I go to the page I see the printer and the section that says drivers, but there is no place to click on the page that says download

  Hello

  Please use the following direct link:

  http://ftp.HP.com/pub/softlib/software12/COL42011/MP-108821-4/OJ4620_1315-1.exe

  You can click 1 or 2 as shown

  

  Kind regards.