HP m9500z is crushed, able to reboot and restore, now no start HP screen, just hangs

Similar Questions

• Computer recently downloaded and tried to run a update and system now cannot start Windows

  As the title suggests, there was a failed an automatic update attempt.  System attempted to automatically repair the problem, couldn't.  I tried to restore to a checkpoint before the update attempt.  This was failed several times.  Each time the system reboots and the tent to start windows but ends with the blue screen crash every time.

  I am able to go into windows in safe mode, but it ends up doing what I was doing outside of windows.

  The blue screen is not displayed for a long time, but when he does has what I think is an error code or something... This code is always the same - as I saw it several times, I managed to write it: 0x0000007F.

  Any ideas?  Help!

  Thank you

  The f

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And read this:
  

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Installation of XP Mode on Windows 7 Enterprise x 64 fails to reboot and restore the settings

  I just got my new machine that has Windows 7 Enterprise x 64 SP1.  I try to install XP mode.  Following the instructions on the Windows XP Mode download on this site. I was able to install XP Mode using the installation program downloaded, it (WindowsXPMode_en - us.exe). I rebooted the machine.  Then I tried to install: Windows6. 1 KB958559 - x 64 - RefreshPkg.msu

  The package installs and then want to reboot.  After the reboot, when it arrives at the end of the installation. It-error and return rollers.  What I am doing wrong?  I tried to uninstall and reinstall XP Mode, including going back to my restoration shows until I started this.

  After XP Mode installed, I get all the entries for the XP mode in my Start menu under all programs.  I do not have the folder C:\Program Files\Windows XP Mode

  I read this page.  I understood the question.  When I got my new machine, they had installed Windows Virtual PC 2007, which shows only as Windows Virtual PC on the start menu.  I watched the video on installing it and noticed that the Virtual PC, I had in my Start menu was not a record.  Looking at the installed programs showed me this gap. Uninstall allowed KB958559 must be installed.  Everything worked as expected from there.  Thank you.

• Hi, after about half an hour I can not select the open tabs or see new tabs. When I reboot and restore previous session new tabs appear.

  Unable to activate the existing tabs. I have no problem with the restoration of a previous session or by opening the previous tabs, but although the new tabs are created - because I see them when I restart Firefox - they are invisible until I restart. In addition, some, but not all menu options are not available, until I restart.

  Any advice would be appreciated,

  See you soon,.

  Ian

  Hi philipp and cor - el, thanks for advice on my problem with the tabs on Firefox gel. After the safe boot mode, I think I have identified that the problem was an add-on, which enabled me to manage and save Firefox sessions.

• Computer hangs when rebooting and intermittently does not start power

  When you restart the computer, it stops but does not restart. At the stop, the fan continues to run, and is turned on. To start the computer, hold the power for several seconds, waiting and power of the machine back on. Sometimes it takes several tries to get the computer to boot. Two things: there must be an easier way, and if I damage your computer in any way with this manual extinction?

  Hi head of I-d-10-T.

  Try toclean boot to see if it's a program or process that is causing the problem to stop. Also, in Safe Mode, run your antivirus. If you do not have an antivirus installed, you can useMicrosoft Security Essentials to scan you computer.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Xbox 360 update has been cancelled in the Middle until the update and is now glued to the screen saver.

  UPDATE XBOX 360 HAS CANCELLED IN MIDDLE NOW SA DOES NOT WORK

  I tried to update my xbox 360 to connect JOIN XBOX LIVE BUT MY BROTHER TURNS IT OFF BY SWITCH please TELL ME WHAT to DO. I'm blocked some how it's stuck to the xbox screen saver... Help, please.

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to the Xbox 360 and would be better suited to the Xbox technical support community. Please visit the link below to find a community that will provide the support you want.

  http://support.Xbox.com/support/en/us/NXE/default.aspx

• I am trying to download and install CC - Help programs! It just hangs.

  Does anyone else have this problem? I've been watching the circle going for about 10 minutes and nothing happens in the creative clouds. How to install and use Creative cloud if you can't get on your system?

  Xtabs salvation,

  Please try these steps mentioned in this link, it can solve the problem.

  http://helpx.Adobe.com/Creative-Suite/KB/troubleshoot-creative-cloud-installation-download .html #click_download_try

  http://helpx.Adobe.com/Creative-Suite/KB/troubleshoot-creative-cloud-installation-download .html

  http://helpx.Adobe.com/creative-cloud/KB/troubleshoot-CC-installation-download.html

  Please feel free to Inbox private in case of any question.

  Kind regards

  Baudier

• Satellite C855 - update Windows AMD 7610 GPU causes restart and restore

  On a TOSHIBA Satellite C855 with graphics AMD Radeon HD M 7610, I'm getting repeat ' Advanced Micro Devices, Inc. - Graphics Adapter WDDM1.3 - AMD Radeon HD 7500/7600 Series "update problems when installing the Windows 8.1 (64-bit).

  During the installation of the update, restart the laptop and only a restore option is available.
  Every time this update causes a reboot and restore.
  A very miserable situation.

  Toshiba knows why in this case, what is the solution?
  Update Microsoft recommends this update for users of Toshiba.

  Toshiba has official advice on satellite users should apply Windows updates like these?
  This problem has been ongoing since late December;
  [http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/problem-with-graphics-driver-update/a7a6da38-6575-405b-86c2-71a620be06b7]

  Kind regards.

  Before you begin to discuss your problem, I would like to know if you have updated Windows by following the instructions on http://www.toshiba.eu/innovation/generic/windows8_1-message/?
  You will find detailed instructions for the Win8.1 update.

• window mail contact restoration of system backup and restore files

  I backed up my system on a portable hard drive, he said, he would return to the top of my window vista email contacts and emails, but when I tried to restore themn he wasn't able to find it can help any one?

  Hello

  The WindowsMail.MSMessageStore file is the file of database of WinMail. You will not be able to backup and restore that easily. You should back up the registry keys and the entire message store and no not only the database file. The WindowsMail.MSMessageStore file is only the database and does not contain messages. The messages are in the same directory, but under the directories that correspond to message folders in WinMail. Old Windows Mail would be apt file to search for.

  For more information, you can consult the following article:

  Messages may be stuck in the Outbox when you use Windows Mail on a computer that is running Windows Vista

  Hope the helps of information.
  Please post back and we do know.

• "Backup and Restore Center" I cannot access the drive c: for backup

  I'm attmpting to make a backup using the "back up and Restore Center."  On the screen, which asks "which disks do you want to include in the backup?" it shows my C: drive but does not allow me to select.   C: drive is 254.1 GB and nothing 416,7 GB of free space on my external hard drive.  Please let me know my options.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Help required with error 0 xC0000001 when opening DULL of the start menu and also impossible to create the recovery Dell backup and restore file.

  I use computer dell laptop inspiron 15 5558 with 8.1 windows preinstalled in it.

  I wanted to reinstall windows but I have no recovery media. Also I'm unable to create a new recovery media from Dell backup and restore. Also, I am unable to open feel of backup and restore in the start menu as this error comes up on screen

  Its always not available on him would happen, rumors were that he should have been made available yesterday, but Microsoft decided not to release it yet:

  http://winsupersite.com/Windows-10/Windows-10-build-10586-heads-slow-ring-insiders

• I get the message that adobe InDesign CC 2015 has stopped working. I updated and rebooted and still not be able to get.

  I get the message "Adobe InDesign CC 2015 has stopped working". I updated and rebooted and still impossible to get. Help me!

  Hello

  See the following topics:

  Adobe InDesign CC 2015 has stopped working

  Adobe indesign cc 2015 has stopped working

  Adobe Indesign CC (2015) has stopped working error

  Let us know if you need additional assistance.

  Kind regards

  Shelly

• Satellite M50D-A-10W - error "reboot and select proper boot device."

  I have a Toshiba Satellite M50D-A-10W passing me all nuts "reboot and select proper boot device."

  This has happened before and it was solved by ctr-alt-del and F12 to get into the BIOS where the date went back to some time in 2010 - after put so far and to change the boot device, everything worked fine... until the next day.

  Now I get the screen "reboot and select good boot device ', but the F12 key does not; I also tried F2... the message keep multiplying, no BIOS...
  Help, please!

  In some cases the BIOS is only accessible by pressing the button turn off force on the lower side of the unit.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  After that you were able to start the windows system, its highly recommended to update the BIOS as BIOS update would solve this annoying problem.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB4903N50000R01.htm

• Reboot and select good Boot Device problem - my PC does not start!

  Hi all

  Whenever I turn on my computer I get the message "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key.

  I checked the diagonistics material and these are the results:

  Test CPU-

  Hard drive: failure of the connection Test - Error Code: BIOHD1

  Memory - past

  I don't think that the issue is a faulty connection. My reason to believe so because I think that I had a virus on my computer (I was not able to confirm) I tried to delete the last time I was able to use the computer. Then I turned off the computer to restart, but unfortunately, that's when I got this error message.

  I had this problem once before (about 3 years ago) and I was not able to solve this problem, so I just stopped using the PC. Then one day my Dad turned on the computer (a few months later) and it worked all of a sudden.

  Anyone know what this problem is? How can I solve this problem?

  Any help is greatly appreciated! Thank you very much for your time and effort!

  Additional information:

  It was originally a windows 7 PC, but I have upgraded to windows 10, which is the current operating system.

  Product: HP p6620f

  I managed to start my PC again.

  I have unplugged all connections and left it that way for about 24 hours. Then I plugged everything back in and all of a sudden the PC worked again. I don't know if it will last, but right now it works.

  I'll write another post if something changes.

• When we turn the or after mode 'sleep' my motherboard will load but then nothing else... White screen. If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  When I turn on my PC or after mode 'sleep' my motherboard will load but then nothing else... White screen.  If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  I have this pc for 3 years.  My system was full of unused and unwanted programs, so I rebooted to Vista, deletted all my old files that Vista had moved into the "old." This is when I started having this disorder.

  (I made this process more yet to see if it would help with no luck)

  My first thoughts were video driver... downloaded the new drivers 3 times.  scanned all the other drivers for updates ect. nothing seems to help...

  Anyone have any ideas?

  Thank you

  Dave

  I have

  I was able to download these files.  Rthl64.sys point - one component of your network cable in pictures device driver memory.  Interestingly, the dates of the 2006 pilot (Rtlh64.sys my Sep 26 07:20:23 2006 (45190CF7)), so it's most likely your problem.  Follow these steps:

  -Download a new copy of the software/drivers on the website of Realtek here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2

  -Uninstall the current software/drivers on your system

  -Install the newly downloaded drivers

  -Monitor for more BSOD

  Here is a summary of the BSOD:

  BSOD BUGCHECK SUMMARY

  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 16:23:07.947 Sun 31 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 13:18:38.380
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03de3a30 fffffa80 '05bf1050 fffffa80' 072dc010
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 22:49:49.007 sat 30 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 5:12:31.440
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03def060 fffffa80 '05bdf050 fffffa80' 04aeb2d0
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6001.18000.amd64fre.longhorn_rtm.080118 - 1840
  The debugging session: 21:48:58.144 Wed Oct 27 2010 (UTC - 05:00)
  System Uptime: 0 days 9:49:32.487
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03a1ca30 fffffa80 '05-99050 fffffa80' 039c8c60
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

  -John ( http://www.carrona.org/index.html )