Wireless connectivity problems: Windows Vista displays connected to the internet with good signal, but cannot access the internet more than a few seconds.

Similar Questions

• Vista wouldn't boot - the system starts for a few seconds and powers down.

  I have a laptop computer HP6915 under Vista Premium. When I turn on the system starts for a few seconds and turns back. I don't know if there is a hardware problem or if Vista is somehow corrupted. I tried to enter the net bios, but the machine does not respond to the F2 command. Ideas?

  Hello

  Symptoms, especially since it will be impossible to access BIOS, mean that you need a real computer
  Shop (not the leeks and the glances at a Best Buy or other stores) or HP support.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

• How a wireless internet you can say, it is connected with good signal, but is not at all connect to the internet?

  A few months earlier, towards the end of February, my diet flashed for a few seconds, and when I rebooted my windows xp professional sp3, internet connection would not work at all (it was working fine before). So, I have been in charge of research and looking to see if there was some kind of reason for what happens.

  If anyone knows, please do not hesitate to say.

  Hello

  · What is the number and the model of the computer?

  · Who is the internet service provider?

  Try the steps listed in the link below: how to fix wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

  Repair your network connection: http://windows.microsoft.com/en-US/windows-xp/help/networking/repair-network-connection

• Cannot turn on Atheros AR928X Wireless Adapter in Windows Vista Edition Home Premium g71gx rx05 with F50SF MB

  Hey so I know this post is old and likely dead but I have the exact same kind of problem he described above, and patches replied did not do anything. the wireless card, I have however is a network adapter atheros AR928X running on windows vista 64 bit on an asus g71gx rx05 wireless. I can't real tech help because the windows sticker I became unreadable on certain parts of the code, so I can't get online. help would be appreciated.

  I had this same exacct problem and I fixed after constant trial and error by reinstalling the (ASUS Wireless Switch (Wireless Console3) utility) http://support.asus.com/download.aspx?SLanguage=en&m=G71GX&p=3&s=136&os=24&hashedid=j9EAEJubYZtCZDcP 3.0.11

• When I connect to Windows Live Hotmail, I see my emails but cannot access that everything is frozen. A message appears while Live does not and asks me to refresh.

  When I connect to Hotmail, I see my emails but cannot access that everything is frozen. A message then appears that direct does not and asks me to refresh. Windows looking for a solution and after a new wait everything is accessible. Very annoying, how to cure it?

  Hi techcnophobe1,

  Thank you for visiting the Microsoft answers community.

  The question you have posted is bound using Windows Live and would be better suited in the Center of Windows Live Help solutions. Please visit this link to find a community that will support what ask you

• WIFI disabled on windows vista and cannot wireless connect to the net

  WIFI disabled on windows vista and cannot wireless connect to the net, but bluetooth wireless Wi - Fi and fine switch is activated. Have a problem with ISATAP #5 who is incapable of solving that can be bound.

  All of a sudden I lost my internet connection wireless and I am unable to return.  May be because recent windows update.  Error messages on the wireless assistant say WLAN offshore or disabled.  I have tried every fix.

  In device Manager (under network adapters) shows also that MS ISATAP disabled with "Windows cannot load driver (Code 31).  When I try to update the driver, "Best driver already installed" appears.

  Is there a way to FIX?

  http://support.Microsoft.com/kb/932520

  Read the above re ignore this error message.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• my windows vista computer keep saying the user profile cannot be loaded.and I can not connect with my password. And I need a floppy disc or usb flashdrive.please free help to change password

  I can not connect and it says failed to connect to the profile.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Password problems / Windows Vista

  Hello

  Changed login password, however, when incoming re did not work. Password and I tried f10 change pressing f12.

  Changed the password / reboot / had black screen with the key / entered recently changed password and log into the page emerged, but password has not been

  has changed.

  Tried to enter f10 once more, but I'm now completely stuck and can't get into the computer at all. Homepage only...

  Pls help what to do. Thanking you in advance.

  E-mail address is removed from the privacy *.

  Hello

  This is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  _______________________________________

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  _______________________________________

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  ______________________________________

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• 5520 HP usb and a wireless connection at the same time

  I have set up my new 5520 HP with USB connected to my desktop (Vista) for maximum reliability and can print via printer share from my laptop (XP), but I'm obviously missing out on HP web services.  Can I have the USB connection or wireless connection at the same time?

  Hello f1charlie,

  Its new r: YES, because it would be 2 printer icons. One for the USB and the other for the wireless.

  The icon of the printer wireless would be similar to Hp 5520 (network).

  You can set these printer (USB or network) icon to by default.

  But again, every time that you want to print using any application. Click file > print, which will display a dialog box, where, in, you can select the printer icon.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• Failure of wireless connection to the router to the desktop

  I use Windows 7 and a router/modem method. The wireless connection to the internet recently stopped working in my HP Pavilion desktop computer. He still works for my tablet, but I can only connect to my desktop by Ethernet cable. It would seem that the fault lies in my office. The icon in the bottom right of the screen shows the wireless internet available as internet access card. I can't find any disabled dialog box display the Wi - Fi connection and troubleshooting shows no defects with network cards. Does anyone have any suggestions?

  If I understand you correctly, when you click the icon in the system Notification area, you can see a list of the available connections, including the SSID of your wireless network.

  If this interpretation is correct

  • Unplug the Ethernet cable
  • open network and sharing Center
  • Click on the link 'manage wireless network '.
  • Select your network
  • Click 'delete '.
  • Now close the window manage wireless networks
  • Click on the network icon, select your network
  • Click on connect
  • Enter the security password when prompted.

• Wireless connection to the network home

  I recently bought a Tecra8200 with free Wi - Fi. I have a XPprof Windows installed on it. When trying to connect to my home network with wireless lan functionality, I am not able to connect to my router Sitecom WL-025. (cables) In exceptional cases, the system does not recognize the wireless network. In two cases only have been recognized my Sitecom and the Belkin to my neighbor. I've only had the SSID for routers. No connection. What settings should I enter to make this thing work with the version of wireless network card?

  Hello

  You can check the router if a MAC address verifivcation is enabled? You have any other PC with wireless connection to the router and look in these wireless settings?

  Goodbye, Meier

• When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

  Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

  Hi Ashutosh,

   
  You did changes to the computer before the show?
   
  This error indicates that the boot sector is corrupted or missing.
   
  I suggest for the link and follow the steps in the article:
  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
  http://support.Microsoft.com/kb/2622803
   
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• My wireless connection says "no internet access.

  Original title: Network question

  Hello
  I noticed a change in my system. My wireless connection says "no internet access. The other connection, presumably one wired, is OK.
  I have no problem on internet and computer my son who is temporarily connected to the same router is also online.
  But I wonder what can happen to change that, and what I can do about it. I noticed this when a little yellow exclamation point appears on the network icon in the systray /taskbar.

  I spent a lot of time with the guidance of the internet, Cisco install CD, ipconfig and its switches, update drivers for the network adapters, uninstall the card network wireless and relocation, etc.. But the situation remains the same.

  I will link to some images what I mean (hope it works).

  Thanks a lot for your suggestions.

  Jack

  https://SkyDrive.live.com/redir?RESID=BF9482F6B726F60C! 133 & authkey =! AMKjZQs1wxoJ6ac&ithint=folder%2c.png

  Hello methacrylate.

  Yes, you are right. See my response to PML. I guess I got both wireless and ethernet capability all along and didn't understand why.

  (My system is a desktop computer).

  But the problem is solved.

  I appreciate your response.

  Jack

• Upgrade Windows Vista Home Premium (not the valid product key problem) to Windows 7 Home premium

  My friend gave a laptop computer whose OS is Windows Vista Home Basic Edition.  I format the computer and install a Windows Vista Home Premium I have for my desktop computer.  Now, I have a problem with a product key.  When I start the laptop, it indicates a product key requirement.  I enter my desktop OS product key, but I still see the declaration valid product key.  My question is this.  If I buy the upgrade to Windows 7, the operating system will work in the laptop even if she has a problem with the product key.  If I buy Windows 7 upgrade, there will be no problem with the product key?  Or do I have to buy a new Windows Vista Home Premium for the laptop?  Or if you know anywhere I can buy a product key for Windows Vista with a reasonable price?  Thank you

  You cannot transfer a license from another computer to another computer, especially if the license came with this machine. You will need to purchase a new license.

  Yes, you can purchase a license of Windows 7 Edition upgrade Home Premium and use it.

  Where can I still get Windows 7?

  Full version - Microsoft Windows 7 Home Premium

  Version upgrade - Microsoft Windows 7 Home Premium Upgrade

  Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)