HP Officejet 6600: Original charge

Similar Questions

• HP Officejet 6600 copy function - output offdset

  E-all-in-one printer, HP Officejet 6600 range

  The print function works fine.

  When you use the copy function, the image is moved to the top about an inch.

  Otherwise, the top inch of the page of the original is missing and there is an inch of white space at the bottom.

  Sorry,

  At took the second back to BestBuy. Referred and got an Epson WF-2540 and an $80 store credit.  I'm sorry. Closing this thead OK?

• OfficeJet 6600 paper jam won't clear

  I have a HP Officejet 6600 e-all-in-one printer and got a paper jam the other day, but even after removing the paper, I keep getting an error message saying remove the rear access panel and remove any paper. The jammed paper is not tear or rip so there is no bit left in the printer. I tried all the options on the support page - including the cleaning of the rollers and a power reset - to do this, nothing helps.

  I've only had this printer a few months and I am at my wits end. I have never had a printer with this issue before that wouldn't clear a paper jam error.

  I asked my brother-in-law to watch just to make sure that I had covered everything. He concluded that the sensor in the back that detects the paper jams was, well, stuck. He loosened it so she moved freely again and now it works perfectly. It must have happened that I was the original paper jam remove the rear access panel.

  Thanks for your help.

• 'Open doors' error on HP OfficeJet 6600

  Hello

  I have a printer HP OfficeJet 6600. After I changed the 932XL with a new black print cartridge (original), I get an error: door open, with the message: "the door or lid should be closed to print. Make sure it is completely closed. »

  I checked the front and rear, door as well as the top cover (copy/scan), and all of them are CLOSED

  Any help? Any clue? Any idea?

  Thank you

  CAT

  Yes. I solve the problem, but in a way no, proffesional.

  I discovered that, when changing the black cartridge, a small pin located in the upper right of the front door, was broken (reliability?, quality?).

  Then I discovered that the PIN around which the Panel is rotating... is not only a PIN (hinge), but, if it is pushed in (horizontal movement) can act as a sensor push-pull. I stuck the "pin" with a small piece of paper o, I closed the door (with the broken ankle and... it works.)

  Hope that my non-professional explanation has been authorized.

  Kind regards

  Catalin

• Portable printer HP Officejet 6600: need of digitization program

  I bought my printer HP Officejet 6600 in January 2013.  I've installed all the programs on my old computer (Windows Vista). With the installation, I was able to print electronically, and there is a stock of Scanner program that allowed me to scan a Document or Photo to my computer. I recently bought a new computer (window 10).  I tried to use my HP disc to download these printer programs but was unable to do that because I got a message that the disc did not support Windows 10.  Can you help guide to get the programs of HP that I could access and download to my new computer which would give me the possibility to print electronic and scanned documents and photos (not via the USB port)?

  Why don't you just download the software Win 10 out of the HP web site for your printer. A simple search returns... http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6600-e-all-in-one-printer-series---H7/4322968/model/4323587

• OfficeJet 6600 / Officejet 650: roblem recognition new printer when printing to adobe files

  Having a problem with my Officejet 6600 when I try to print a file "adobe". The problem is that the onl print window shows my previous printer that was n Officejet 6500 E709n. I NC does not change this in the print window. I have removed all traces of the Officejet 6500 E709n of my system and have reinstalled the current printer from the disk.

  Any ideas? Need help.

  TallPal1

  Hi @TallPaul1,

  Since you seem to be able to print from other programs, I think that the question has something to do with Adobe. Maybe you will find the following article, I found the site useful adobe: PDF print troubleshoot | Acrobat, Reader.

  If the problem persists, it may be preferable for you to reach the Adobe community.

  Good luck! If there is anything else I can hep you let me know. Please go on the HP Forums!

• Starting with HP Officejet 6600 and cannot change the page size

  Hello

  You have just purchased HP Officejet 6600 all-in-in-one and found that there not a duplexer, which is very very annoying! However, if I can just change the paper size, I can live with the disadvantage to the paper.  I have a Word document that is the flyer for our company, a document A4 which must be printed on A5 paper.  Old Canon printer I could make the A4 as an A5, but now I can't.

  Hope I explained the correct problem and the TIA for help.

  

  In my copy of Word 2007, I am able to evolve in A5 paper.

  Be sure to select A5 in 6600 preferences.

• OfficeJet 6600 connects to the wifi network

  Hello

  I bought an Officejet 6600 and effortlessly connected to my wifi network, print and scan for a day. And there are two days that he stopped conntecting to the wifi network. In the meantime, our router turned off and turned back on. That's the only difference.

  First of all, the printer would not even detect the wifi network. I solved that by changing the configuration of the router (Cisco 3925 EPC) and passed under the Setup wireless "Wi - Fi protected setup" to "manual". I can now see the network on the printer again.

  But after that I've selected my wifi network and enter the WPA password, the printer tells me that the network connection is impossible. I printed a page of diagnosis, which told me that the problem is perhaps related to the MAC filter. But I have no MAC filters. I also tried to pass of WPA/WPA2 to WPA only, but that doesn't change anything.

  I also tried to set the mode wireless via the USB cable, but no avail. Everything seems to work, until the moment when he tries to connect to the wifi (screen with 'configuration' with the large antenna and pulses of radio waves).

  Should I give up and bring it to the store? I'm getting desperate!

  Thanks for your help in advance,

  Raphaël

  OK, to make sure I understand - the printer connects effectively to your wireless network, and well it works for a while once the printer goes to sleep, your computer or router may not wake.

  If this is the case there are a few things that we can try:

  1. in the settings of your router, make sure that the multicast is enabled.

  2. set the 2.4 GHz router to 11 channels.  I know it sounds weird, but please try.

  3. set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.

• HP Officejet 6600: hp6600

  Anyone know the heavier weight of paper that goes through this printer please? (In gms)

  The heavier, I tried is 160gms, but I really need something thicker, but I don't want to take the risk of breaking my printer.

  Thank you

  The document here , said the Officejet 6600 can handle 200 g/M ^ 2 notecards and 250 g/M ^ 2 photo paper.

  E-all-in-one printer, HP Officejet 6600 range

  NOTE: The e-all-in-one printer HP Officejet 6600 doesn't have a duplexer.

• HP OfficeJet 6600: Printer Office scanning does not work

  I have 3 PCs that have been updated with 10 windows and all had the upgrade to the software and drivers proposed for 10 Windows of the software of the printer.

  Alone is capable to scan himself. This is done by using the HP Officejet 6600 icon to access to the

  "C:\Program HP HP Officejet Officejet 6600.exe 6600\Bin\HP" - launch UDCDevicePage

  (also available in an earlier version of the software and not available on the other pc).

  This open a page with a sweep, a document or a Photo option, which allows me to scan a document.

  Can you help me please why scanning works on a pc and not the other 2

  Managed to find a doctor Print & Scan and problem solved and can scan all 3 printers

  Thank you

• HP Officejet 6600: Error in HP Officejet 6600 paper

  OfficeJet showing without paper loaded when the tray has a lot of paper in it. Have tried cleaning the rollers, but made no difference.

  Welcome to the HP Forums @hopuldey,

  I came across your post on your Officejet 6600 not detect the paper in the tray and advise you to load paper and wanted to tender hand with my own suggestions.

  Check out the guide below and try the steps in order. If the error persists, contact HP to discuss a replacement.

  Tip: Make sure that the printer is plugged directly into a wall outlet, avoiding bars power and surge protectors.

  • An "out of paper" Message appears and the printer is not Pick Up or paper source

  If you have trouble with the steps, let me know and I'll do my best to help.
  
  Click the thumbs below up to say 'Thank you' and 'Accept as Solution' if the problem has been resolved it please and thank you!
  
  All the best,
  
  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• OfficeJet 6600 Fax confirmation date and time fields zeros

  When I send a fax directly from the printer that prints the confirmation record has a field for the date and time, but it shows all zeros (see below)

  Is it possible to fix these so that they are accurate? If I need to prove that a fax has been sent, it must show when.

  With the help of 6600 OfficeJet on WiFi with Windows 7 64 bit

  

  Hi CJChristian,

  Welcome to the HP Forums!

  I understand that your date and time of confirmation fields are equal to zero with your HP Officejet 6600, and I am happy to help you!

  Please have a look through this guide. Implementation of the hardware of the printer for e-all-in-one printers HP Officejet 6600 and 6700 Premium H711n. Select the Officejet 6600 and search for step 7 set the Date and time.

  Also this guide can help too. Setting up the device HP all-in-one to send and receive faxes.

  I hope that these guides are useful to you and have a nice day!

• OfficeJet 6600: iPad suddenly can not find wireless HP printer.

  iPad, suddenly cannot find a working HP officejet wireless printer!  He worked recently.

  Hey @dburbage,

  Welcome to the Forum from HP Support.  I understand that you are unable to print from the iPad using your HP Officejet 6600 e-all-in-one printer.  I want to help you with this and can have steps that you need to restore this functionality.  What you describe, it seems that you use AirPrint.  I will answer my advice for this type of installation, but if you use ePrint, please let me know and I'll give the information you need.

  You have confirmed that your printer is connected to your wireless network?  Button on the front panel of the printer the wireless icon and make sure that it is connected and displays an IP address.  If this isn't the case, run the Wireless Setup Wizard to restore connectivity.  If you are connected, powercycle your equipment as explained below:

  1. Unplug your modem/router
  2. Turn off your printer and your iPad
  3. Wait 60 seconds
  4. Plug in your modem/router back in and wait that he reconnect to internet
  5. Turn on your printer and once it starts up as normal, confirm that it is still connected to your wireless network
  6. Turn on your iPad

  After completing these steps, you are able to connect your printer with the iPad?  Please let me know the result of your troubleshooting by responding to this post.

  Have a great day!

• OfficeJet 6600: Failure of printer, no error code

  Down printer, no code error.  Tried troubleshooting tips; Reset no has not worked and cleaning of copper on the ink cartridges, not working anymore.   Printer 3 years so out of warranty.   This printer is in a holiday home and I remove the cartridges in the winter.  Is this a problem?  Is there anything else to try, or do I need a new printer?  Tried to submit the form to contact HP 3 times for nothing helped... the site could use improvement.

  Remove the cartridges to store the printer for the winter is a major problem - which cause the printhead not replaceable to dry out, leaving probably clogged ink residues.  In the future if you have a printer with separate ink supply and print (like the Officejet 6600) heads the cartrdiges never be removed from the printer for more than thirty minutes at a time, and the printer should never be put off with the cartridges removed.

  The following may help recover the printhead (maybe 10% chance).  Turn on the printer, remove the cartrdiges impression and drip hot water on the screens on the print head which would connect the ink cartridges.  I put about 3 to 5 drops in each screen.  Let it sit for a few minutes, then replace the ink cartridges.  Run three cleaning cycles in quick succession the façade or the Toolbox.  Is there an ink at all on the page?  If yes let the printer sit overnight, then repeat the process.

• HP Officejet 6600 Guard giving the message there is a problem with the printer or the ink

  HP Officejet 6600 Guard giving the message there is a problem with the printer or ink. We have already tried to turn off then, have you tried unpluging and nothing works

  OK so I solved my problem normally my printer tells me what was low on ink im although there no and homesick, that I had to replace an ink catrige and his works now