'Open doors' error on HP OfficeJet 6600

Similar Questions

• OfficeJet pro 8610: open door error ADF

  The ADF begins to pull on a page then stops and says that there is a door open ADF error.  I don't see where this would be. This is the first time I've ever used the ADF, so I can't tell if it worked before or not.  The cover is not closed tight on the glass... which means that there is like a 1/4 "crack all around.  I put the weight down on it and tried again, but which did not help. Any suggestions?

  Hello @Idempke, greetings!

  Thanks for joining the HP Forums. I would like to help

  I understand that you are getting the error ADF door open on your printer. Try following the steps and check them out below:

  Make sure that the doors of the ADF are closed on both sides. Please check the picture below. The red part surrounded by a circle is the ADF door. You can open the door and close the door with little force.

  

  If the problem persists, try to unplug the printer from the power outlet when the printer is turned on. Wait 2 - 3 minutes then turn on the printer and check.

  Let me know how it goes

  See you soon

  Please click on "acceptable Solution" on the post that solves your problem to help others to find the solution. To show appreciation my help, please click "Thumbs Up icon" below!

• HP Officejet 6600: Error in HP Officejet 6600 paper

  OfficeJet showing without paper loaded when the tray has a lot of paper in it. Have tried cleaning the rollers, but made no difference.

  Welcome to the HP Forums @hopuldey,

  I came across your post on your Officejet 6600 not detect the paper in the tray and advise you to load paper and wanted to tender hand with my own suggestions.

  Check out the guide below and try the steps in order. If the error persists, contact HP to discuss a replacement.

  Tip: Make sure that the printer is plugged directly into a wall outlet, avoiding bars power and surge protectors.

  • An "out of paper" Message appears and the printer is not Pick Up or paper source

  If you have trouble with the steps, let me know and I'll do my best to help.
  
  Click the thumbs below up to say 'Thank you' and 'Accept as Solution' if the problem has been resolved it please and thank you!
  
  All the best,
  
  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Reference Dell laser MFP 1815 door open door error

  The printer had this error coming and going for quite awhile and now it won't go more away when you remove the toner cartridge and paper from the tray.  I'm sure it's a switch, but I don't know where to find this type of error.

  I'm having the same problem. Have you found a solution?

• Try to print, PC says he'll send an Officejet 6600 fax

  My HP Officejet 6600, which I had to reinstall because of a connection problem, calles herself now FAX HP Officejet of the 6600 in the PC.

  No way to print. My PC is a HP Pavilion h8-1030be. He continues to ask for a fax number.

  No idea how to set up the printer on the PC, in order to print when I want for that.

  In any case, I will try now to restart the PC and see what happens.

  Best regards

  Thanks for the update, Paul.

  It seems that the installation did not properly this time and I advise to remove the printer software.

  • Click on the start menu in the PC
  • Click on all programs
  • Open the HP folder
  • Open the folder for the Officejet 6600
  • Click the uninstall option
  • Once the uninstall is complete, the program will disappear.
  • Click on the start menu in the PC again
  • Click on devices and printers
  • Remove the 6600 if she is always present
  • Select any remaining printer by clicking once to the left
  • At the top of the window, click Print Server properties
  • Click the tab drivers
  • Delete lists of the Officejet 6600

  Once the printer is deleted, then re-install with the latest drivers from the HP website.  To access the downloads page for the 6600 click on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-108845-3&cc=us&DLC=en&LC=en&OS=4063&product=5304873&sw_lang=

  This returns the printer to normal functionality?

• "Open door".

  Although my 6310 All in One Printer is out of date and guaranteed, all I want to know is; How can I get this message deleted? Otherwise, my printer does not work. I think it has to do with the cartridges, but I replaced both of them and the message remains in place blocking printing.

  Any suggestion would be appreciated.

  Hi Seamus123,

  Here's the link to a document that will help you get the error message. Let me know if you need help.

  'Open door' Error Message is displayed on the control panel

• OfficeJet 6600: Failure of printer, no error code

  Down printer, no code error.  Tried troubleshooting tips; Reset no has not worked and cleaning of copper on the ink cartridges, not working anymore.   Printer 3 years so out of warranty.   This printer is in a holiday home and I remove the cartridges in the winter.  Is this a problem?  Is there anything else to try, or do I need a new printer?  Tried to submit the form to contact HP 3 times for nothing helped... the site could use improvement.

  Remove the cartridges to store the printer for the winter is a major problem - which cause the printhead not replaceable to dry out, leaving probably clogged ink residues.  In the future if you have a printer with separate ink supply and print (like the Officejet 6600) heads the cartrdiges never be removed from the printer for more than thirty minutes at a time, and the printer should never be put off with the cartridges removed.

  The following may help recover the printhead (maybe 10% chance).  Turn on the printer, remove the cartrdiges impression and drip hot water on the screens on the print head which would connect the ink cartridges.  I put about 3 to 5 drops in each screen.  Let it sit for a few minutes, then replace the ink cartridges.  Run three cleaning cycles in quick succession the façade or the Toolbox.  Is there an ink at all on the page?  If yes let the printer sit overnight, then repeat the process.

• OfficeJet 6600: Office jet 6600 "Scanner failure" error

  I have a relatively new (9 mos old) Officejet 6600. When I turned on it today I got this error "failure of the Scanner: unable to scan, copy or send a fax."
  It is not connected to a computer or network, and is used only for the copy and fax.
  Help! It is in my office and we copy ASAP!

  Hi @wwah,

  Welcome to the Forums of HP Support!

  I understand that you receive an error message on the screen of your 6600 HP Office jet printer. I'd be happy to help you with this.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document that I recommend that you try, products HP all-in-one - a 'Scanner failure' Message is displayed on the all-in-one control panel and you can not scan, copy or fax.

  This paper addresses issues in which a "Failure of Scanner" message displayed on the printer control panel. If a different error message is present, follow the steps in the section "Some a software problem or connection when you try to scan?" to find a document that answers to your problem.

• OfficeJet 6600 uninstall error

  I have a workstation that has problems with scanning. I'm trying to uninstall the device software based OfficeJet 6600 with the hope that the resettlement will fix the problem. However, I can't uninstall existing software or install a newer version. In both cases, the installer provides the following error message:

  2081883393 failed to get devices

  Is there a manual removal method that will allow the resinstallation of the software. The printing functionality still works. Thus, some of the functionality is there.

  Furthermore, a method to reinstall scanner driver can operate a repair does not seem to do.

  
  OK,  If you find this useful or mean please make sure you click on the White Star under my name to give me congratulations.

  I really appreciate it!

  Follow this link and click on the link provided on the Web site. This will install Microsoft utility for cleaning.

  From there please go through the process and eventually it will ask to if you want to install or uninstall, select uninstall you.

  From there, you should be able to choose what you want to uninstall programs.

  Let me know if this has removed the software.

  THX

• OfficeJet 6600. Works as a printer, but not able to start the scanner.

  OfficeJet 6600. Works as a printer, but not able to start the scanner.

  I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

  I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

  Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

  But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

  However, despite the property intellectual not recognized the device functioning as a "printer".

  But I need to use it as a scanner.

  Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

  Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

  Can someone, please?

  Thank you in advance.

  Hey,.

  Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

  Have a great day!

• HP OfficeJet 6600: HP OfficeJet 6600 hangs

  Hello

  my HP OfficeJet 6600 just hangs (freeze) on every two days with WIFI and '? LED lights up on the display, no response to button presses and unable to stop using the switch, so I have to pull the power cord each time. The device also gets lost in the WIFI network, print clients show "connect to a printer" forever.

  This is happening now for months, began a few months after the purchase.

  Also the driver repeatedly rants on the use of non-genuine print cartridge, which is clearly not the case and delivers also warnings to the subject of print head blocked. No movement of the head at the opening of the front service door.

  How to proceed?

  I have not found a partner of local service in Austria via the search function of the HP Web site.

  Thank you.

  Hello

  Thanks for the reply.

  I'm a COMPUTER technician and so have already checked the options user as software updates day and follow-up of the FAQ/knowledge base documents without success. I finally found a way to communicate directly with HP support and today I got a response.

  Thanks for help

• HP Officejet 6600: problem with the printer or ink system

  I have a HP Officejet 6600. I replaced the black cartridge with a new HP black ink cartridge. This message keeps poping up, there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. It gives me as two solutions. Solution 1: Reset the product. Turn the product off, and then unplug the power cord. Plug in the power cord and then press the key to activate the product. I've done this three times. Second solution: contact HP support note the error code provided in the email (I looked and it does not give me one) then he says, supported to contact Hp. go to: www.hp.com/support. Needless to say that this message keeps appearing on the screen of the printer and I can't do anything with the printer. Can anyone help with an idea? Please, I beg you.

  Hey @popcorn101,

  Welcome to the Forums of HP Support!

  I understand that you get the error "printer failure: there is a problem with the printer or ink system' on the front panel of your HP Officejet 6600 e-all-in-one printer.". Thanks for the troubleshooting steps that you received before reaching out for support, including. Right now, you have completed all the troubleshooting steps available in your efforts to solve this error in accordance with the document of support here. The failure itself is probably due to a failure of the print head. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head does not, then the printing within your product system has failed. In this model of printer print head is a non-replaceable. Therefore, the resolution is a replacement of the entire unit.

  I highly recommend at this stage that you contact our Technical Support telephone queue for discover hardware replacement options.

  HP technical support are available by clicking on the following link:

  Contact HP support

  (1) once the page opens, please select the country in which you are located. Then, enter your HP model number on the right.

  (2) choose the 'Contact Support' tab at the top and scroll down to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click on the 'Show the Options' icon in the lower right.

  (4) Finally, scroll to the bottom of the page and select 'phone number.' A file number and telephone number will now fill for you.

  I wish you good luck going forward with this!

• HP Officejet 6600, uninstall problem 2081883398

  Hello

  I have a really frustrating problem with my printer HP Officejet 6600. I'm using windows 7, 64 bit.

  All of a sudden the scan function stops working.

  I tried to uninstall the HP Officejet 6600 Basic programs, but when uninstalling this has place of message:

  Error - 2081883398: failed to uninstall the device with serial number: C939DARJIJ05RN.

  If I choose ignore, uninstall the software, but the driver "HP Officejet 6600" are still there, but does not. In addition, this driver are listed in the device 30 Manager - 40 times.  I tried several methods to remove the driver.

  If I ignore this problem to uninstall and reinstall the programs basic HP Officejet 6600, everything is OK until I try to install the wireless printer. The program finds the printer and printers IP address, I mark a press "next". The message "Network Installation missed" takes place. "

  I have installed and uninstalled programs several times, tried to remove the drivers not working not (also in the 7z-cards back), but I have not managed to come around the problem.

  Please - I need help!

  OLHO

  Hi olho.

  This occurs due to malware or other non legitimate software on your PC, please follow the following steps to resolve this problem:

  1. From the control panel > uninstall a program. search for the following keywords:
     Bandoo, IAC, APN, SweetIM, iLivid, Ask Toolbar, SweetIM, Appshat, movies Toolbar and remove any existing result.
  2. Restart your PC and go to the Device Manager, check if these instances can now be uninstalled.
  3. Click the view menu and select Show hidden devices and then continue to search for and remove the printer from the printers / print queues / imaging devices / multifunction adapters / other devices.
  4. type % temp % of the start menu search bar. Open the temp folder, and then open the most recent installation folder that begins with 7z, then open the Utils folder.
     To open the X 86 a 32 bit OS, open the X 64 folder for a 64 bit OS... If you are not sure of your operating system type, follow these steps:
     http://support.HP.com/us-en/document/c03666764
     Run the RemovePreinstalledDrivers file and allow it to reach 100%
  5. Go 2 folders back to the 7z folder and locate the MSI Setup file:
     Research of * x86.msi or * x 64.msi, depanding on your type of operating system.
  6. Right-click on the largest MSI file out of the 2 resutls, then click on repair. If you get a prompt that it is no longer valid for select software installation instead of repair.
  7. Restart your PC.
  8. Open the Officejet 6600 software and follow these steps to reconfigure the device, check for the difference.

  Please let me know if this is useful,

  Shlomi

• HP OfficeJet 6600: Printer Office scanning does not work

  I have 3 PCs that have been updated with 10 windows and all had the upgrade to the software and drivers proposed for 10 Windows of the software of the printer.

  Alone is capable to scan himself. This is done by using the HP Officejet 6600 icon to access to the

  "C:\Program HP HP Officejet Officejet 6600.exe 6600\Bin\HP" - launch UDCDevicePage

  (also available in an earlier version of the software and not available on the other pc).

  This open a page with a sweep, a document or a Photo option, which allows me to scan a document.

  Can you help me please why scanning works on a pc and not the other 2

  Managed to find a doctor Print & Scan and problem solved and can scan all 3 printers

  Thank you

• OfficeJet 6600: officejet 6600 will not be installed

  I have a computer that is running Windows 7 (updated) with a 6600 Officejet attached via the USB port. It worked fine for 3 years, BUT I had to reinstall the printer 7 times in the last 2 weeks. When I turn off the computer at night and turn on the next morning and I begin to print something, I get "no printer installed." It SEEMS to make no difference if I turn the printer off or leave it on when I shut down the computer.

  Any ideas?

  Rusty

  Hi @RustyDHH,

  Thank you for reaching out to the forums! I understand that whenever the computer is restarted, you must reinstall the printer software. I'd love to help you.

  I have provided a few steps to try to see if we can solve this to happen again in the future.

  Here are the steps to completely uninstall the printer from the computer.

  In devices and printers, click once on any icon listed and select the printer at the top of the display server properties, click the driver tab.

  Select the 6600 Officejet then click on delete, the pop up dialog box.

  Select Remove driver and driver package, click OK, click Yes in the confirmation pop up message. (if they are not in the list, it's very well)

  Then in the printers and devices window, right-click and select remove device for Officejet 6600 drivers.

  Unplug the USB cable from the computer.

  Uninstall the printer software.

  Restart the print spooler:

  Click Start, run, type admin in the search programs and files box and then click on the list management tools.
  Double-click Services.
  Right click on print and left spooler, click Properties.
  Click on stop to stop the print spooler.
  Click Start to restart the print spooler.

  Run the Microsoft Fixit Tool: diagnose and automatically repair Windows files and folders problems.

  Reregister Windows install:

  1. Quit all programs.

  2. Click Start, run, type msiexec / unregister in the Open box and click OK.

  3. Click Start, run, type msiexec/regserver in the Open box, and then click OK.

  4. Restart the computer.

  Disable all startup programs and temporarily disable the Antivirus software. There might be something running in the background cause of conflicts. How to use MSCONFIG. Click the Startup tab, and then click Disable all.

  Make sure that you are connected to the computer with Admin rights, and then reinstall the printer using the latest drivers. Here is the link: 6600 Officejet HP e-All-in-One Printer series - H711 full feature software and driver.

  If the problem is resolved and that you appreciate my help, please click on the button "Accept as Solution" and the "Thumbs Up". Let me know how make you out. See you soon!