HP officejet pro 251dw: officejet pro 251dw gather

Similar Questions

• OfficeJet pro 251dw: usb printers disconnects

  OfficeJet pro 251dw disconnects after a print job

  If I do a power cycle, I can print a job then the printer goes offline.

  The printer is USB connected.

  I disconnected the power and the USB and reconnected them.

  I rebooted without results. The printer is set as default printer.

  Hello
  
  Now, my problem is apparently solved.
  I had the help of the ' Geek Squad'. " The agent showed me how to limit the address that could be assigned dynamically using the pool of router.
  In the distribution of addresses IP mode on the network (home or office), we have developed the distribution of IP addresses 182.168.1.2 to 192.168.1.174.
  This is the address 192.168.1.200 available for the printer. We have changed the address of the printer in the IPv4 configuration in the
  Office jet pro 251dw printer web site (192.168.1.200) at this address and assign the static - in the router.
  He did assign port 9100, I'm not clear as to why it was necessary.
  The printer has worked since July 25 without becoming disconnected.
  
  Frank C

• OfficeJet Pro 251dw: Officejet Pro 251dw printerhead damaged

  Hello!
  
  New here.
  
  My printer may explain his printerhead is damaged or has a defect. What can I do about it?
  
  Thank you
  Jesper

  The troubleshooting in the here document steps can help solve the "damaged print head": message for printer Officejet Pro-251dw.

• OfficeJet Pro 251dw not connected

  I have my new 251dw HP Officejet Pro connected wireless to an Apple AirPort Express router. The router is also connected to two Mac computers, both running on OS - X 10.9 Mavericks. For a week, I had no problem printing on the desktop computer, and I had not tried printing from the laptop. Today, the printer refuses to print anything from computers, even if everything is turned on. When I click on the printer icon in the Dock, I get a message "printer offline". The printer thinks it is connected; the wireless test page and the pages of network configuration all went brilliantly. What could happen?

  In fact, we have solved the problem. And it was so simple, none of the tech experts I treated supposed to check on her. The driver has not been installed. The reason: in my setup previous Parallels Desktop 6 and Windows XP within my Mac, I was able to print in Windows with the pilot only installed on Mac, because the program Windows would capture the printer, which was connected to the computer by USB cable. In my new Setup, the printer is connected wirelessly to a router, and so I need drivers for the Mac and Windows applications on the same machine. But I didn't know that, and no one thought to tell me. Somehow, I made a wild guess which may help a Windows driver, and it solved the problem.

• HP officejet pro 251dw: hp officejet pro 251dw displays incorrect time

  the printer screen shows incorrect time

  Hello

  Please try to touch printer,

  1. Scroll right, and select Configuration
  2. Preferences or configuration of the printer,
  3. Date and time.

  Enter the time to your watch.

  Kind regards.

• HP office jet pro 251dw: find the name of the network printer

  Hello

  I want to create a shortcut of the queue for the ability to quickly cancel a print job

  To do this, I need the name of printer network such as:

  C:\Windows\System32\rundll32.exe printui.dll/o/n HP6CC21747B66E

  The above is incorrect. How to find the correct network name

  Thank you

  Frank C

  I found the Brink tutorial on creating a shortcut of printer queue:
  Shortcut of the print queue - create in Windows 7 and Windows 8
  
  In my case, the name of the printer is "Printer HP Officejet Pro 251dw PCL 6 (network)"
  It must be in quotes because of the spaces.
  
  I did create it a shortcut in the location target using the following:
  %WinDir%\System32\rundll32.exe printui.dll/o/n "Printer HP Officejet Pro 251dw PCL 6 (network)"
  
  I ran a test with no paper in the printer, so it couldn't print.
  I have performed the shortcut, the print job in the queue. I canceled it
  And it worked!
  Frank C

• OfficeJet Pro 8600 N911A: fax wireless

  I need to be able to SEND faxes.  Is it possible to configure my Fax on my Wireless HP Officejet Pro 8600 model N911A?

  Welcome to the community of HP @BARBEO,

  I understand that you are looking to set up your HP Officejet Pro 8600 fax functionality. I'll be happy to help you.

  It is possible to configure your HP Officejet Pro 8600 to fax, however, fax can be used through your wireless network, so the printer will be connected with a telephone cord. Below, I've posted a link to a document that has some instructions on how to configure the functionality of your HP Officejet Pro 8600 fax. Please try all the steps in order and get back to me with the results.

  HP Officejet Pro 251dw, 276dw, and printers of the 8600 series - set up the all-in-one to send and receive faxes

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• OFFICEJET PRO 8600 Plus: OFFICEJET pro 8600 more

  I have been using my OFFICEJET pro 8600 more for a few years with no problems until now. It is connected wireless to my network and it is unusual. I can print a single item and then it loses the connection. I have to turn the printer off and power turn it back on, then I can print another point and it disconnects again...

  very frustrating that someone knows how to fix this?

  I use Apple and PC. Same question with all devices and computers.

  Thank you

  Greg

  Hello! Welcome to the HP community @WilSwann,

  I have seen your post on how your printer is disconnect your wireless network and wanted to answer with my suggestions.

  Check out this link and try all the steps that are listed here. Normally, they help with this type of concern and hope that they will help fix yours too!

  HP Officejet Pro 251dw, 276dw and 8600 Printer Series - printer keeps no connection Wi - Fi
  
  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  If there are any problems, please let me know
  
  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• my HP Officejet Pro 8600 more is always offline and no longer print

  I use my HP Officejet Pro 8600 with wi - fi.

  He worked for 3 months, Las week that it no longer works.

  I checked the Ip address, I checked the connection... Nothing works

  It's really frustrating

  Thanks for the help

  Chiara

  Hi @Mizia , welcome to the HP Forums there!

  I saw your post on your Officejet 8600 more disconnect it from your wireless network, and I hope to help. I have some suggestions for you to try below which might help to restore the connection between the two.

  Try power cycling network devices:
  Turn off the printer and the computer and unplug the router for 1 minute (do not press the buttons on the router).
  Plug the router back in and wait another minute, turn on the printer and the computer.

  Try the procedure described in this document:

  HP Officejet Pro 251dw, 276dw and 8600 Printer Series - printer keeps no connection Wi - Fi

  I hope that the connection is when you have completed the steps above. If there are any problems, please let me know the details and also include with which operating system you use on your computer.

  Have a great Monday!

• HP Officejet Pro 8600 Plus: HP Officejet Pro more than 8600 mysteriously went offline today

  Hi all.  Hoping that someone out there has experienced and solved the problem, I will describe.  We have a desktop computer with Windows XP Dell, a Dell laptop with Windows 8 and several iPhone 4.  We also have a quantum Verizon FIOS router, which we installed a week ago.  (We were able to print to the printer HP of all of our devices, once the new router has been installed).  Until today, all of our devices connected to the router and our range of HP printers.  Today, we cannot print anything for the HP printer.  We uninstalled and reinstalled the printer software.  We have followed all the steps HP print and Scan doctor.  We have unplugged the printer and the router and plugged them both back.  We rebooted all electronic devices.  We ran the network Test on the printer wireless and did get the message 'no problem found.  Congratulations on the success of your wireless printer setup. "All the results of the test came as a 'PASS '.  Still no luck.  The printer is 'offline' and none of our electronic devices even recognize it.  Any help would be welcome!

  Welcome to the HP community @FedupinVA,

  I saw your post on your connection on your HP Officejet Pro 8600 more problems, and I would help him.

  Try the steps in the link below, it offers the solutions to this problem. Please try all the steps and let me know the results, as well as the problems or the error codes that you met.

  HP Officejet Pro 251dw, 276dw and 8600 Printer Series - printer keeps no connection Wi - Fi

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Mac cannot print wireless HP Officejet Pro 8600 Premium

  I have a wireless network of office with some Mac and some PC and an HP Officejet Pro 8600 Premium.   During the initial Setup, the first Mac was able to print fine, but today, he was not able to print.

  Two PC can print wireless with no problems.  Macs are struggling, but it's different for each:

  Mac #1-OSX 10.8.5) printer installed via the installation CD.  He worked for a week, then stopped working today.    I sent a print job, and he was sitting in the buffer always 0%.  He never gave an error, but it has never printed.  Then I uninstalled the printer and added via system preferences and got the message "Unable to communicate with the printer right now" while the installation failed.   However, I am able to navigate to the IP address of the printer from a browser and see all the parameters.  I am also able to scan FROM the printer to this computer, then it is certainly communication he...

  2 mac - OSX 10.7.5) installed system Prefreences without problem printer.  Sent a print error-free job, but he blocked indefinitely in the buffer to 100% and never printed.   This Mac was able to print via USB.

  We are on the same wireless network.  The printer is configured with a fixed IP address.  Any ideas?

  Hello whatkatiedoes,

  I understand your frustration I want to gather some information so that we can begin troubleshooting.

  Did you update firmware for your OfficeJet 8600 Premium? If this isn't the case, I wish that install you this, it was released 23/7/2013 click here to update the firmware.

  Also we will go forward and restore the default network on your printer, go to the front panel of your printer and follow the steps below:

  Menu Configuration > Tools > restore default settings

  Now that we have a 8600 OfficeJet updated premium and have restored the default values. I want to you now to connect wireless using the Wireless, Setup Assistant which is also found in the front panel of your printer. Steps listed below:

  Menu Setup > network > Wireless Setup Wizard

  Once these steps have been performed, you can now try to re run the installation software. Here's the direct link for HP Officejet Pro Full Feature software and driver - Mac OS X 10.8. Please let me know the result and if it was successful, I hope to hear from you soon.

  Thank you

• HP OfficeJet Pro scan is no longer with Sierra

  I am running OS X Sierra on 2012 MBA with an HP OfficeJet Pro 8600 printer / scanner.

  I noticed that after the upgrade to Sierra that the scan function no longer works... I tried to uninstall / reinstall the device, but the problem continues... I have checked the Apple Web site and notice that the HP OfficeJet 8600 is listed as a compatible scanner.

  I note also that the 8600 OfficeJet is connected as a printer via WiFi network and worked perfectly with the captain.

  With:

  1 has anyone else experienced this problem?

  2. What if anyone has found a solution / workaround?

  TIA,

  Joel

  responsibility to provide drivers to work for an update of the OS is with the developer of this device, not Apple. visit the page of the developer for your make and model camera and see if they offer drivers, otherwise contact the developers. Apple will sometimes provide printer drivers, but if a device is a legacy printer the developer may choose to retire it from use.

• HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

  I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

  It is said:

  "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

  I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

  HP Officejet Pro 8600 +.

  Product number CM750A
  Sequence number {content removed}
  Not under warranty

  Please notify.

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
  http://goo.GL/BXDFf
  
  It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

• After installing hp officejet pro 8600 I can't access the toolbar at the top to access all my favorites? How do I get back them?

  My son-in-law installed the hp officejet pro 8600 and cannot access the toolbar above or get it to sit still without moving. So I can't access my history, bookmarks, etc..
  Even with the toolbar at the bottom as well.

  Right-click in the empty area (next to the tabs) and make sure that the option 'Bar' personal is selected. I hope this helps.

• HP Officejet Pro 8600 Plus doesn\ ' impression on network t...

  Two weeks ago, I set up a HP Officejet Pro 8600 more using two USB & ethernet cable connections... Everything works very well on all devices - iPad, iPhone, MacBook Pro, Win7 desktop PC and portable Win7... until the printer goes to sleep.  We does not display every day, so it may be a few days between printing / scanning.

  As I kept an eye on to do this, it has happened twice now, it may take a few days before the printer is unresponsive.  When laptops Windows 7 need to print, the printer does not respond until what feed us the cycle.  The INVESTIGATION period has not changed on the printer and the software HP Update says that everything is up-to-date.

  From what I can tell, other devices - Win 7 Desktop, iPad, iPhone, and MacBook Pros seem to be the problem.

  Win 7 laptop 1 - connection WiFi AP w / cable for printer

  Win 7 laptop 2 - cable ethernet to AP w / cable for printer

  Win 7 Desktop - USB cable for printer

  MacBook Pro - cable ethernet to AP w / cable for printer

  iPad/iPhone - WiFi connection AP w / cable for printer

  Printer Firmware Version - CLP1CN1232AR

  Set a static IP address in the printer out of the router's DHCP range.  Use a channel wireless fixed like 1.6 or 11 never 'auto '.   Power at the same time.  Power on router wait 2 minutes.  Please turn on printer and connect.  Try now.