HP office jet pro 251dw: find the name of the network printer
Hello
I want to create a shortcut of the queue for the ability to quickly cancel a print job
To do this, I need the name of printer network such as:
C:\Windows\System32\rundll32.exe printui.dll/o/n HP6CC21747B66E
The above is incorrect. How to find the correct network name
Thank you
Frank C
I found the Brink tutorial on creating a shortcut of printer queue:
Shortcut of the print queue - create in Windows 7 and Windows 8
In my case, the name of the printer is "Printer HP Officejet Pro 251dw PCL 6 (network)"
It must be in quotes because of the spaces.
I did create it a shortcut in the location target using the following:
%WinDir%\System32\rundll32.exe printui.dll/o/n "Printer HP Officejet Pro 251dw PCL 6 (network)"
I ran a test with no paper in the printer, so it couldn't print.
I have performed the shortcut, the print job in the queue. I canceled it
And it worked!
Frank C
Tags: HP Printers
Similar Questions
-
Office Jet Pro 8600: office jet pro 8600 clear the display
I have an Office Jet Pro 8600 and need to know if there is a way to fix the screen faded. You don't see the options like print, scan, fax, tools... It isn't that I know where they are and who's who for the most part.
In addition, scanning is not clear. Everything is faded. However, it still prints and faxes by a fine. I hope I don't have to buy a new All In One Printer. I finally got most of the glitches and tricks when I have a problem with it. Is it possible that there is a light bulb needs to be changed or something? I appreciate your help & feed back as soon as possible. I use in an office on a daily basis.
Kind regards
Meredith
Hey @mere4340,
Welcome to the Forums of HP's Support.
I see that you have some problems with the copy and see the display on your Officejet 8600 e-all-in-one printer. I can help you with that.
To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute.
If after the above, that you can't always see the screen or copy clear, the printer needs to be replaced because it has no replaceable bulbs in the scanner or the display. You can contact the HP Support by clicking here and filling out the form below to see what options are available.
Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
-
8620: could not start scan to HP Office Jet Pro 8620 since the upgrade to Windows 10
I've updated to Windows Home 64 bit 10.
I can scan if it is started from the PC to the HP printer Assistant.
But impossible to start a scan of the front of the printer 8620.
It times out and gives errors
"The analysis has failed in one or more of the following problems
-connection to the computer is lost
-L' scanning on the computer application is currently in use
-Application OCR is not installed on the computer
See the computer for details screen'
Nothing is displayed on the computer screen.
How to do a scan to work on the printer without initiating the PC?
this to go to JohnGPB solved my problem
22/08/2015-12:18
Hey there,
One thing before you start, this solution won't work for (its of course HP) inkjet printers
Try the next step, I believe that this will help you overcome the problem.
1. start by dissconnecting the USB cable. (If its connecetd wireleslly, go to the next step)
2 remove the printer driver of "devices and printer" which is located in Control Panel.
3. download the complete solution for your printer.
4. extract the contents of the file. (Using winrar or any other method, you know)
5 open the "Utils" folder and choose in the "x 64"(ou le «x32"encas vous utilisez ce type de système) subfolder, you should be able to locate a file called 'RemovePreInstalledDrivers' > once you open this file black screen opens, wait for it to close, then move to the next step.". "
6. go to the main folder where you have already extracted the software and right click on the file x 64.msi (name is most likely your printer model), then choose the Option "repair". > Subsequently, you will be asked of preformed a reboot. (Incase you will get a Messege saying "this action is only valid for products that are currently installed" simply double-click the file instead)
7. after rebooting, the head in the drive Local C/ProgramFiles/HP/PrinterModelFolder/bin/USBSetupL uncher (or DeviceSetupLuncher if his wirellesly connected) and double click it.
8 follow the steps for you and connect the USB cable when you are invited to (if the wireless sound just choose the wireless option)Who should add the scanner to your imaging devices.
Best Of luck ~ -
Is it possible to exceed the HP printer Assistant homepage on the scans?
I have a lot of scans that I have to do, still on scan 1 completion system keeps bring me to the home page of Print /Scan/ Fax. I want to stay in the dialog screen Scan Scan 2... 3... etc.
Thanks, RobD3
Hello
Thank you for using the HP forum.Do not know if the next video would be helpful:
Scan multiple pages to a PDF document
Once you have saved the document, you can click on 'Back' (instead of 'fact') to return to the user interface to scan and search again without closing and everywhere from the homepage of rint /Scan/ Fax.
Hope that helps.
-
HP Office jet Pro 8600: 8600 all-in-one does not print
First of all, I'm very technically challenged...
My printer is connected by radio to two computers. The two are not able to print anything. They have all two printed up to that we have a new computer in and then we worked for a little while and the other older. Currently, no work.
Light on the port in the back where the ethernet cable is connected is in the lower part of the port and flashes intermittintly on top. The connection does not snap-in.
It's probably a harware problem? Is there something I can do a simple test? Replace the port which can be done at Best Buy or other? The printer has 2-3 years and we loved so far... Thank you
HI @Rosetree,
I noticed that you are having problems printing to your printer HP Officejet Pro 8600. I understand that the problem started when you got a new computer. I would like to look into this for you today.
We are considering the possibility that the new computer interferes with the IP address of the printer on the network. Let's see if we can identify the cause.
I see that you mentioned in your message, wireless and wired. How is the printer connected? (Ethernet/WiFi)
Here is a document that I recommend that you try, a view of the error "Unable to Find printer" for the HP Officejet Pro 251dw, 276dw and 8600 Printer seriess. "
Try the HP print and Scan Doctor to identify and solve common problems when installing or using s HP on your home network. What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages).
Note: You may need to follow this guide for both computers. I recommend following it all the way and then try to print from both machines.
Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!
-
Office jet pro 251dw: turn on the duplexer
Hello
I followed this procedure on page 24 of the HP Office pro jet 251 dw users guide
To turn on accessories (Windows)
1. click on start and then click Printers or printers and faxes or devices and
Printers.
-Or-
Click Start, click Control Panel, and then double-click Printers.
2. right click on the printer icon, and then click printer properties.
3. Select the device settings tab, click on the attachment you want to turn on,
Click installed from the dropdown below and then click OK.
the correct appearance settings. (device settings)When I try to print double-sided it is not available.
He says no, will flip or turn up.
(the printer options)I need help to use the duplexer
Thank you
Frank CHello
Both turn they average Flip [are the] duplex options. Normally we use Flip on to Portrait and Flip up to the landscape.
Kind regards.
-
Office Jet Pro 8600: problem of authentication on a Android phone net Office Pro 8600
Hi my name is Jack and I get an authentication problem when setting up my Android smartphone version 5.1 Lollipop printing to Office Jet Pro 8600 with the last service Plugin from Google HP play printing store
Hi Banhien
After two days of frustrating trying to get my Motorola Smartphone connect and print on my HP Officejet Pro 8600, I finally saw the light. He seems to think I didn't need to change my home network (SSID) as suggested by the consumer cell phone support to overcome the problem of authentication. Thinking as the phone OS was ANDROID 5.1, it is the necessary IP to it see the printer. My problem was that I kept entering my IP Phones ANDROID for it to see the printer instead of the IP to printers for the phone to connect to the printer. Once I realized that and I replaced the printer IP in the phone, Bingo, it worked 'awesome' with the print service plugin. I want to thank you for the suggestion to use HP Eprint app that I don't know who would have functioned as if I got the IP address in the configuration without the telephone.
Jack1121
-
HP Office Jet Pro 251 DW: placement of envelope
Hello
HP Office Jet Pro 251DW
Microsoft Word 2007
The model of envelope in the status bar displays the envelope centered, face down with the flap to the left.
Is the default value of the envelope word 2007 - envelope tab > Options > print options are face down with flap on the right in the status bar.
That worked fine until recently. I can only put an envelope in the tray this printer-centric.
If I choose face up or face down in the print options, printing is always on the side of Rabat. The envelope always passes through the duplex unit.
With the face down it shouldn't go through the duplexer. The only way I can print properly on the face is charged to the surface of the envelope with the flap to the right.
I would like to come back as it was of the operation - face down from Rabat to the left as shown on the template. Any ideas?
Frank CHello
I worked with HP Support for the Office Jet Pro 251DW. (1 800 334 5144)
We walked in a shared session and after many expeiments, we concluded that there
to disable the duplex in word before printing the envelope. Then the envelope could be loaded as
prescribed by the model of Lac to paper. It is face down with the flap to the left.
Missing this step the envelope goes through the filter of referral and prints on the side of Rabat.
Word > Office button > print > properties > print on both sides > no > OK > close printing diagloge
Don't say OK to print because it will print until the envelope is ready.
Now choose mailing and envelopes. Enter the address and print them. Do not forget to return the duplex setting before
a normal print job.
Either way, you can manage addresses envelope and letter with Grahm mayors insert address.
http://www.gmayor.com/InsertAddress.htmFrank C
-
Office Jet Pro L7580, Windows 7 64-bit Installer
I have a Dell Studio Desktop, which I updated to Windows 7 32-bit to Windows 7 64 bit. Now, I'm trying to reinstall the drivers for my Office Jet Pro L7580. The Office Jet and the Dell Studio are on a cable network.
I tried to use the HP printer install Windows Wizard, but whenever I use it, I get the message "the wizard has detected a problem with the software driver for the selected printer. If I continue I then I get a message "the system cannot find the file specified" or a message indicating that an error has been detected and the system must be closed. Once, I don't have the progress bar, but it did not move past the first step.
Before performing the installation, I disabled the TSRs terminate and stay, erased from records and trust temporary and disabled my McaFee firewall. Just as it had all but recommended no advantage.
I also tried to use the utilities to remove the driver, two of them, but this made no difference either. The documentation says that the driver removal utilities will run at 4 levels. I do not know how, because it doesn't seem to be an exe file. However, when I run the batch file "Uninstall" Windows, it seems to work at level 2 and ask as I restart the system. Deleting driver utilitiesboth I raced my attached printer and not connected to the network.
I guess the message "The wizard has detected a problem with the driver software" must disappear before I can get a positive result. I guess also that this message is displayed because there is some residual remaining Windows 7 32-bit software that utilities to uninstall Windows not delete because they are not executed correctly.
Any suggestion would be appreciated.
Having investigated a bit more, there are a couple of logs who recommend using Revo and CCleaner to remove songs flying over a previous installation. I've loaded and executed these two and Revo has found a large number of entries that I deleted.
I then ran the wizard again and after a lapse of acertain time and a recommendation to turn my anti virus software I know succeeded. I will think long and hard before repeating this procedure.
-
HP Office Jet Pro 8600 help how do I enlarge the print on an original when it is in copy mode?
I find it on my help screen how do I enlarge the print on a copy of an original document that I want to copy. I have Windows 7 on my computer and printer is HP Office Jet Pro 8600 wireless. I have a printer HP (3 in 1 officejet) before and it was much more user friendly. Is to use the online mode?
Here is a link to the user manual. To get the possibility to enlarge the copies, press this option on the display of the printer, then tap SETTINGS and then select resize, use the right arrow key to scroll through the sizing options on the printer. Changing the settings of copy is covered on page 59 and 60 in the manual. I hope this helps.
-
HP Office Jet Pro 8600: Error Message: Scan in use - wait until the job is done
Have used my scan function without problem since the purchase of machine and one year on Microsoft Windows 10. Last week I did some scans - now this week when I try to use my scan function I get the following error message: Scanner is busy. The scanner is currently in use. Wait until your previous task is completed, and then try to scan the image.
-There is no unfinished business and I can't find anywhere to clear the error or erase any task the scanner thinks he's working on. Has anyone met and solved this problem?
Thanks in advance for any help you can provide!
ritao
Hello
Thank you for using the HP forum. You can try the following:
Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU
If this does not work, you need to maybe uninstall and reinstall the software COMPLETE features:
Please uninstall and reinstall the software COMPLETE features, follow these steps:
1. download and save the software COMPLETE features (do not install online)
Before you download, choose the right model, the operating system and complete software functionality.
2 uninstall the software from your computer
3. install the FULL feature software "saved".Here are some resources for you scan:
Quick Guide for scanning needs
Hope that helps!
-
Office Jet Pro 251 DW: HP 251DW Photo printing problem
Hello
My printer HP Office Jet Pro 251 DW does not 4 X 6 paper Photo of HP.
The choice of papers on the print job include not just any photo paper.
The error on the printer is:
"Paper detected does not format selected.
Make sure paper size is correct continue the work. "The choice of papers is:
16 K, A4, A5, B5, and letter cards postal Japan, five envelopes, Executive, legalThere is no choice of photo paper.
The current printer driver is class PCL6.
The operating system is Windows 10
How to make the choice more paper?Thank you
Frank C
I received help from HP to solve the problem.
The solution is to download and install a new driver:HP Officejet Pro 251 dw printer full of features
Software and drivers 32.2 April 8, 2014Done on both Windows 10 machines.
Frank C
-
Trouble installing the software and the driver for Office Jet Pro 8600
I get error that "additional software is necessary to continue' when I try to install the software and drivers for my wireless printer Office Jet Pro 8600. I just got a new laptop and had at first no parameter problem the printer and it prints fine, but now for some reason it is not print at all. I tried to restart my laptop and printer several times, but it keeps saying printer offline even if it is connected to my wireless. I followed the recommendation of an assignment that suggests to abolish the printer and reinstall, which is where I am now. Now, I can not install this printer at all by the above error message. Help, please!
Thank you!
Hi HSchulz,
When you try to install with the CD, try installing the latest Windows 7 driver from the HP website. Restart the computer, turn off the printer, then reboot your router and then launch the installation. Here is a direct link to the driver file:
http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe
Select the connection Wireless option during installation to get the printer on the network and associated with the laptop. Let me know if this helped at all...
I work on behalf of HP.
-
Office jet pro 8620: should I disable the printer without cartridge installed?
I removed the original HP ink that was defective and took it back. Now I have the inkjet (Office jet pro 8620) without cartridges installed. The printer says not to disable so that it does not get damaged but I'll be away for a week and want to turn the printer off. I will cause damage if they do?
Thank you. I guess I'll have to keep on like this for a week then. Too bad.
-
Office Jet Pro 8600 that printing of the iPad
I am running Linux Ubuntu 12.04 LTS and have recently have not been able to print from it. My printer is the Office Jet Pro 8600, and on the first week I got it Setup print without problem. Now, I can only print from my iPad and when I try to print from my computer it says that it completed the work.
Hello frashure11!
About your problem, I suggest you check if you receive the internet signal or uninstall and reinstall your HP printing software again. The reason of why I tell you to do these is because when you try to print wireless, then you know how much you receive signals. For example, if you do not receive the maximum amount of the signal, then the chances are that printing occurs slowly. Sometimes, you can also try to uninstall the printer software and reinstall it again. But before you do that, re - check that your internet connection is to give a signal properly. I prefer lets you choose a password that has a security code, so that you can receive the maximum signal, somewhat, rather than having several people use it. Thus, your internet will go slowly and your impression will slow down.
I hope this works!
Maybe you are looking for
-
I'm still running 10.7.5. Is this OK to upgrade to the latest version, or should I go each on the order of victory until I'm there?
-
Hi all I am trying to run the Vi attached, but after a few seconds it return this error: Possible reasons: Attempted to read samples that are no longer available. The requested sample was already available, but has since been replaced. Increase in th
-
MS Dynamics CRM custom fields as varchar
The two single line of text and multiple line of text are stored as nvarchar in db schema, how do I store as varchar
-
Deletion of data (step by step) USB storage device
I need to know how correctly, step by step, remove a usb port connected data storage device. I am currently using, Windows visit Home Premium. Thank you...
-
Whenever I try to install a new version of Java, but also apply for income tax, my computer basically freezes and I have to stop it manually after that I finally get the message "cannot access the windows service install. This can happen if windows i