HP OfficeJet5610xi: 5610 custom printed in win10 - rather fax dialog will appear

Similar Questions

• Cannot get Canon printer/fax to print with Windows 7. Shows only the fax dialog box.

  I have a Canon MX892 printer/fax/scanner and a new HP laptop with Windows 7.  It shows as Canon MX890 Fax in the peripheral area.  When I try to print, it displays the fax dialog box and will not let me print. How to recognize as a printer?

  Hi Lynn,

  Thanks for posting your question on the Forums of community of Microsoft.
   
  You did changes to the computer before the show?
   
  I suggest for the link and follow the steps in the article:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Note: Refer to the link and install the latest drivers from the manufacturer's website.
  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/office_all_in_one_inkjet_printers/pixma_mx892#DriversAndSoftware
   
  Also, contact the printer manufacturer for assistance.
  Reference:
  http://USA.Canon.com/Cusa/consumer/standard_display/support
   
  Hope this solves the problem.

• Help! How can I configure 8.5x5.5 custom print A2 size printer

  We recently purchased a HP Photosmart 7510 e-all-in-one printer and now my Hallmark card program does not recognize custom calibration. My OS is Windows 7 64 bit. I look forward to hear from your part, thank you.

  Since I have still not received a response to my messages, dated December 7, 2011 and January 2, 2012, I phoned again the technical support line.  Although I was on the phone today for more than 2 1/2 hours (2 calls), I finally received the necessary assistance when I spoke with the 2nd person - Chelsea.  She was WONDERFUL, PLEASANT, a GREAT ability to LISTEN and was prepared to find a SOLUTION to my problem of not being able to print formats customized to my all-in-one HP Photosmart 7510 x.  Since the 7510 does NOT support custom print sizes, she downloaded the HP9500 that supports custom print sizes.  Now, all I have to do when I print from my Hallmark Card Studio program is to choose this printer and my A2 size card prints perfectly.  Thank you, Chelsea - you are awesome!  I always think with all the technologies available that HP needs to update the driver for the 7510 (that prints great plain paper and not great with printing photos) and include formats customized option as do their previous printers.

  Congratulations go to Chelsea to the Technical Support Telephone Center

• 5610 mistakenly print w / appearance "solarized".

  Paper using Photo HP Premium, my 5610 started printing with a "solarized" look, but it prints very well if I select 'Plain paper' & use plain paper. It is perhaps that it is not the application enough black ink. If I select "plain paper & use photo paper, it applies to more black ink, but it prints all colors strongly, while maintaining a"solarized"appearance." This occurs by using HP Photosmart Essentials 3.5 and PhotoStudio6. Windows7 operating system. I have uninstalled & reinstalled the drivers for the printer, as well as the PhotoStudio software. These steps don't correct the problem.

  HP Tech help person solved the problem by recommending to initiate a cleaning cartridge, even if after cleaning, the printer would not print anything, (elements kept in queue), so had to uninstall/reinstall all software & drivers again. Test printing later resulted in the mainstream press.

• After the transition from XP to Windows 7, the custom-printing size selection box has failed.

  I always was able to use my C5180 Photosmart to print pictures of custom size on my old computer with XP.  After getting a new computer with Windows 7, the custom size box says "the custom paper that you have just set will become unavailable for selection until you have left and returned in the preferences to print/properties." (I did too many times to count!) All except 'Cancel' choices are grayed out.  This feature still works on my old computer, even if the box selection and formulation are different.  I have checked and checked the drivers and we have tried many other solutions.  I have worked in this market for a week or two and see that many other people have similar problems.  I would like to buy a new hp printer, but see that even with the new hp printers people have problems with paper sizes custom, which is very important to me - I print a lot of cards of various sizes, mainly of 6.5 X 10 inches.  Of course, no support is available for this printer "obsolete". (It may be "obsolete", but it works fine with XP). I also can't get any definitive information on this feature in the new hp printers and have noted that some people have problems with this feature on the new printers also.

  Thank you so much Shane R. for your expert advice.

  Can I try your solution in the future, but right now I'm satisfied by another solution, I realized with the help of a thematically response on a Windows 7 forum.

  First of all, I'm pretty positive, I used the correct driver because I downloaded the most recent, verified and recontroler, etc.  And, fortunately, most of the features all-in-one is working well.  Because of this, I hate to try drivers for another model - as I have solve my problem. I could end up with another problem - as no function of scan or something.

  Here is how I was able to get custom formats:

  'Start' to 'control panel' for 'Hardware and Sound' ('View drivers and printers')

  Click on the printer

  Choose "Print server properties" at the top of the screen

  Click 'create a new form.

  Give form a new name, for example 7-10 card and put the name into the box just above

  Complete custom down, for example, print size 7 x 10

  Click 'save form '.

  Click "close".

  The custom name and size is then appeared in the photo program I feel for and I was able to use it.

  Thank you, again. (Where can I provide Bravo?)

• When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  You probably use drawing markup tools. There are options to print with or without annotations. You can not change this.

  If you don't want them to see the prices, either remove the original document and recreate the pdf without them there or you can use the redaction tools in the full paid for version of Adobe Acrobat Pro.

• How to print Photo Info in the custom printing package

  I use LR CC, the newer version on a Windows7 PC.

  I'm trying to print Photo Info in the custom printing package. I have no problem if you select Photo Info in the Style of single Image/Contact sheets available, but when I move the custom printing package, the news picture checkbox in the Page Panel, disappears. There is no reference to this in the manual to know why this should happen, or may not be available.

  Appreciate help any with this case.

  Best regards

  Steve

  Hello

  Take a look on: help Lightroom | Print the module layouts and models

  Only on the single Image and Contact layouts sheet can you "... to print information about the photos, such as the file name, title, caption and keywords..." »

• How to print individual differences rather than individual pages? CS4

  I do a booklet and I want to print the first broadcast on a different paper type then the rest of the spreads. I hope that the InDesign allows you to print a gap rather than only certain pages. Do you know where I would go to do that?

  I don't know how to automate this process, but I could do this:

  Put 1 sheet of paper cover on the top of the paper in the tray and print the booklet normally. It may take some work to continue to add cover paper as needed if you print a lot of these booklets.

  Or do the 2 files for printing: cover, inside cover, inside cover and pages of coverage in one - print in a brochure on the cover stock. Inside pages in the other file, print on plain paper. Assemble by hand.

  Edited to add: I just noticed that the booklet is 53 pages long. Logically, it should be a number that is divisible by 4, because each sheet of paper will be 4 pages printed on it. If you have a back cover which should print on the same side of the same sheet of paper as the front cover, it must fall on page 56 (or 52 if you can adapt the text on one less page).

• Output print goes to Officejet Fax

  Printing from PSE 8 on Officejet 8500 appears Fax window rather than send the job to print.

  I found the following reference to this problem:

  Printing output always goes to fax | Photoshop Elements 9

  However, this does not explain where to go to change the name of the fax. I have not found a way to get the name of the fax in the Win7 Panel or in the fax settings in the HP Solutions Center. The appropriate printer name has been defined as default in the control panel and PSE.

  Any help would be appreciated. Thank you

  Sorry, I'm wrong. You are right. I immediately jumped at the usual location of the "Properties" at the bottom of the list of options. I did wake up and see the suggested "printer properties" and found the name of fax.

  Changed the name and everything works as it should.
  Thank you muchly.

• Why facebook will appear in a very small font with firfox? It started just a few weeks previously and that with this site... the print is so small, that it is unreadable

  Firfox 5

  Windows 7

  occurs only with facebook. no other site has this problem

  works very well with explore

  Try to zoom in (CTRL '+') until printing is big enough. Firefox will remember the next time you visit facebook.

• OfficeJet 6500 a Plus: printer shows as a fax machine

  I unplugged my printer about a month ago and when I rebooted and tried to add a printer, it shows just like a fax machine. I've tried different help topics, nothing seems to work.

  Hi @Swissmizz,

  Welcome to the Forums of HP Support!

  I see that your printer of HP Officejet 6500 a more re-won't add to the Mac as a printer, as a fax machine. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you are experiencing. HP doesn't have the full functionality of software and drivers for Mac OS X 10.10. Apple has a software update for the HP Officejet 6500 E710n driver, but it is only the print driver.

  That being said. I recommend reset us the printing system and add new printer using the driver update from Apple.

  Reset the printing system:

  To begin, I will have you reset the printing system on your Mac. Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under"Reset printing in OS X Lion system" because the steps are the same for Mac OS X 10.10. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do not add your HP Officejet in now.

  Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Once the reset complete, restart the Mac.

  Uninstall the drivers and the software (if installed):

  Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down list 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps under two method to complete uninstallation.

  Once the uninstall is complete, please continue on.

  Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Add device:

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  6. click Add to add the printer to the list. Do not add the AirPrint driver.

  7. try to print again.

• I want my mail hot calendar to print like a monthly calendar, as it appears on the screen. The only option I get is a list of every day. How to change that?

  Calendar printing problems

  I want my mail hot calendar to print like a monthly calendar, as it appears on the screen. The only option I get is a list of every day. How to change that?

  I could get a link that I sent to my work email, but I wouldn't have to so roundabout. I should be able to go on my hotmail home account, update my calendar and print it like a standard monthly calendar. Help.

  Hello

  Please see the post below for the links to support for all popular Microsoft e-mail programs.

  Where can I get help with my questions by e-mail? (Windows 7)-Microsoft Answers:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/where-do-i-get-help-with-my-email-questions/461490c7-302b-4cc8-bcd9-127e177d71c3

  Concerning

• Confirmation page when faxing directly from the printer, but not when fax from a computer in network

  I have an Officejet Pro 8600 more network (using the wireless) all-in-One.

  If I fax directly from the printer (using scanning and fax), I receive a confirmation page.

  When I fax from my computer in a network (using the 'Fax - Hp Officejet Pro 8600 (network)' pilot), the status display shows 'composition', 'connection' and 'send '. However, no confirmation page is printed.

  How can I set up the printer to publish one page of confirmation if the fax printer OR my computer using the wireless connection?

  Thanks for your help and your time.

  Planckster

  Hi Planckster,

  A report by Fax of Confirmation is an available option when sending the device itself.

  When sending a fax from your PC, you can find the most recent history of fax by opening the HP software.

  Click on manage the Fax setting, and click Fax history.
  The screen list a report on the recent work of fax, a printed report is not an option for this task, however.

  Shlomi

• OfficeJet 8600: using "Send a Fax" in the companion printer into default printer changing to the fax printer

  Problem with the default printer, changing the Fax 8600 8600

  Windows 10 with the latest installation of the 8600 software

  This problem occurs in the printer Assistant software when you use "send a Fax".

  By clicking "Send a Fax" will cause my default printer change to the 8600 fax.

  I don't know how to change it in devices and printers, but hopes to fix the problem.

  Thanks for the reply.
  In fact, I found the solution. It was a setting of Windows 10.
  Apparently, 10 Windows will change the default printer to the printer last used (in this case, the printer named as the "fax" printer).
  To fix this, I went to:
  Beginning
  Parameters
  Devices of
  Printers, Scanners &
  and turned off the coast "Let Windows manage my default printer"

  This solves the problem. Coming from Windows 7 I wasn't aware of this setting.

• RightFax Print Option - does not open the Fax dialog box

  Currently using Word 2003 with RightFax 9.3.  Word and RightFax are offered through Citrix.  When choosing, file, print and by selecting the printer RightFax the fax dialog box is not open to allow the user to enter the recipient, fax number, etc..  The document goes through the server, but cannot be sent because there is no reference to a fax number.

  Any suggestions?  (could not get Open Text support).

  Hello

  You should maybe contact your system administrator and check with them. Also, follow the link that gives suggestions for updating the RightFax feature.

  http://www.Captaris.com/support/documentation/RightFax/9_3/RightFax9_3FeaturePack2Readme.htm

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.