How to print individual differences rather than individual pages? CS4

I do a booklet and I want to print the first broadcast on a different paper type then the rest of the spreads. I hope that the InDesign allows you to print a gap rather than only certain pages. Do you know where I would go to do that?

I don't know how to automate this process, but I could do this:

Put 1 sheet of paper cover on the top of the paper in the tray and print the booklet normally. It may take some work to continue to add cover paper as needed if you print a lot of these booklets.

Or do the 2 files for printing: cover, inside cover, inside cover and pages of coverage in one - print in a brochure on the cover stock. Inside pages in the other file, print on plain paper. Assemble by hand.

Edited to add: I just noticed that the booklet is 53 pages long. Logically, it should be a number that is divisible by 4, because each sheet of paper will be 4 pages printed on it. If you have a back cover which should print on the same side of the same sheet of paper as the front cover, it must fall on page 56 (or 52 if you can adapt the text on one less page).

Tags: InDesign

Similar Questions

  • How to print individual pages of a pdf package combined?

    How print individual sheets of a several page pdf, so my print program can not handle the format combined? I would like to at least be able to Save the individual leaves in a separate file.

    You can extract pages from a pdf file in the Document menu.

  • How can I get a multiple scan of page rather than each page individually? Want D110, windows XP

    How can I get a multiple scan of page rather than each page individually?  Want D110, windows XP

    Hello

    To scan multiple pages into a single file, be sure to run the scan of the PC and not from the device:

    1. From the desktop, click the icon of 110 HP Envy.
    2. Under the Action of the scanner, click the Scan a Document link or the picture.
    3. In the left pane, select the Document file (the PDF icon) and click on scan...
    4. Use the Plus button to scan additional pages.
    5. When you have finished scanning the pages, click on the button Save to complete the analytical work.

    Kind regards

    Shlomi

  • How to change the graphics rather than the windows screen resolution

    Hello

    Intel graphics card;
    In response to the question of size screen. How him alter the graphics rather than windows.

    Granniebiker

    Hello

    I m not very well what you want to do?  :|
    You want to change the resolution of your laptop screen?

    I assume you have an XP operating system.
    If you can make them using two different ways.

    (1) go to-> graphic display Manager Control Panel Intel-> in one available tabs, you can change the display settings

    (2) using a second way to make a right click on the desktop-> properties-> settings tab
    There is also a setting to change the display resolution.

    Good bye

  • How to print a file of the 8 page to this page after 2 follow 7, then 6-3-4-5?

    How to print a file of the 8 page to this page after 2 follow 7, then 6-3-4-5?

    Use file > print booklet and go through the settings.

    It's perhaps a bit of trial and error - also don't forget to check your printer for duplex printing options and the size and orientation of the page too.

  • Html code for opening rather than web page

    I use Firefox 8. I have a simple html file named test.html stored locally.

    When I double click on the file to open in Firefox as html rather than the web page code. What I am doing wrong?

    I solved the problem. The file work properly. I made the mistake of coding html in a text file, and then save the file in html format. It resulted in the html tags being encoded a second time with html. So to be able to display html tags in the web page.

  • 8620 print any materials other than test page

    Hi all

    Just hung up a 8620 on wireless and everything communicates and the printer test pages work fine. The question cannot print other documents, it goes to the printer says print then does not. It's with anything other than diagnostic pages printed from HP or coil the printer test page.

    It shows in the coil and then disappears, never to be printed. I signed up for ink instant is this cause a problem? This shouldn't be something I need to go into windows to repair. I ran the fix HP software that it says that the printer is not yet on the network, but prints the test pages, as is recognized by all programs. Printer is set as default as well printer. May need to return this thing, I need it for my business and my other printer never had these problems. It's instant ink which was interesting for me.

    Hi TACFirearms,

    Welcome to the Forums of HP Support! I see your will HP Officejet 8620 does not print it goes to the spooler and then stops, I would like to return to the top and print, but require a bit more information:

    1 it IS all programs or a certain?

    2. What is your current version of the Windows operating system?

    3 have you tried to plug in a USB key?

    4. do you get an error message when you try to print?

    If you have a Windows operating system later than XP, please start here: HP print and Scan Doctor- it was designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

    Please let me know what the PSDR find, I'll watch for your reply.

    Thank you

  • Simply submit a region rather than a page

    Hi all

    Is it possible that would submit just one region rather than the entire page when I change a value of an element? I'm going to need to use dynamic actrions for that I guess?

    Thank you!

    Hi Samooray92,

    You are right, that we can do this by using the dynamic action,

    Create dynamic action as follows,

    Event: change
    Selection_type:item (s)

    Article (s): select the name of the item you need.
    Action: Refresh.

    Selection_type:region.
    Region: select the name of the region you need to refresh.

    Thank you
    SreeNithi.

  • How to print a message longer than that of the computer screen? I tried to scroll down to print the rest but it still prints only the upper part.

    If it please help as soon as I'm in a billing dispute regarding & e-mail that I try to print an electronic receipt.

    Hello

    When you have multiple pages to print, when you click on print, you'll get a configuration of the printer option, you can select the range of pages at all.

    If you select the scope of all pages you can print all pages.

    It will be useful.

  • How to remove specific cookies rather than mass - delete all the?

    Firefox for Mac OS and iOS Safari both allow the user to choose the cookies to delete and keep. I can't find how to do this in Firefox for iOS. I found 'Clear private data', but which removes all cookies, not just the ones I choose.

    Hello

    As far as I know you can't do that. However if you wish to provide feedback about this you can do.

    Click here to submit your comments

  • How to buy Adobe products rather than join the Cloud? [was: I've always bought my Adobe products...]

    just get back into the world of graphics and to see there is no upgrade? Is this correct? Y at - it an older version that I can buy so I don't have to do the creative cloud? I have Photoshop, GoLive, Illustrator, and Flash. (previous edition of MM). Is there something out there, I buy to get the version I want now, upgrades - produced hard VS cloud and monthly fees?

    Thanks in advance for your advice.

    Adobe still sells non - Cloud CS6 for those who want and have the hardware and the operating system to run it.

    Creative Suite 6

    GoLive is dead. Sells Adobe Dreamweaver (version CS6 and cloud) and Muse (cloud only) in its place.

    Just keep in mind that CS6 is exceeded for several years and no longer be updated beyond the Camera Raw updates for the new camera support. No new functionality.

    This Adobe and the future is in the cloud to Adobe.

  • ADF 11 g - how to tell the difference between an entire page and an AJAX request

    Hello

    I noticed that a ControllerClass (an instance of oracle.adf.controller.v2.lifecycle.PagePhaseListener, which I defined in the ControllerClass of the pageDefinition property) also get a life cycle AJAX request. The question is how did I get the difference between a request for a full page and a PPR/AJAX application from inside the afterPhase() or beforePhase() method?
    Thank you.

    Rgds,
    Rudi

    isPartialRequest going to do: http://www.oracle.com/technology/products/adf/adffaces/11/doc/adf-richclient-api/apidocs/oracle/adf/view/rich/context/AdfFacesContext.html#isPartialRequest (javax.faces.context.FacesContext)

    John

  • How to print 4 different pictures on one page with Windows Photo Gallery?

    Could not find any way to add different photo once I chose one to print (so I can print 4 different photos on A4 only once.)

    Select 4 photos in the photo gallery
    In the top of the page, click on print, then print again (or just do CTRL P on your keyboard)
    When print photos screen opens upward, on the right-hand side, scroll down to 3.5 x 5 in. (4)
    Make sure that in the bottom of the box for photo to Fit the frame is selected
    At the top, you can adjust the PaperSize, quality, Type of paper and that printer.
    Once completed your settings, click print at the bottom

    That should do it... If this solved your problem, please mark this as the answer.

    Thank you..

  • How to print 4 different pictures on one page in the order I want them to appear?

    I have selected the 4 photos to print on a single page (3.5 x 5) but cannot arrange them in the order I want them to appear.

    Create copies of the four pix and rename
    in the order desired to print.

    Size
    B.jpg
    C.jpg
    D

    Select (highlight) the four renowned pix and
    in the menu choose print.

    They will print as follows:

    A AND B

    C D

  • Personas do not work with firefox 3.6 and yet he directs me to the personas rather than themes page why?

    I've recently updated to Firefox 3.6.3. and I was wondering why I can't use personas, I discovered that they are not compatible with 3.6. But my problem is that whenever I click on 'Get themes' in the section modules, I've redirected the page to personas and tells me I need to upgrade to get the most out of the site (essentially, downgrade to version 3.5) is there any other way around this?

    == I upgraded to 3.6

    Personas (light themes) are integrated in Firefox 3.6.

    Where did you see that they are not compatible with 3.6?

    This is the reason why they probably do not work for you is your Firefox User Agent string is marred by another program you have installed, or maybe a failed attempt to usurp IE 6.
    http://en.Wikipedia.org/wiki/USER_AGENT

    • Type of topic: config in the URL bar and press ENTER.
    • If you see a warning, you can confirm that you want to move forward.
    • Filter = general.useragent.
    • Preferences that are bold, one line at a time, right-click and select Reset.
    • Then restart Firefox

    Check out the Web sites or modules incorrectly report incompatible browser and find what version of Firefox you are using

Maybe you are looking for

  • Can I delete all my photos from iPhone camera roll without having to remove them from my library of Photos?

    I activated for my photos to iCloud and imported all my photos from my iPhone in my library of Photos. Now, I want to erase my Album of pictures of my iPhone because I have too many pictures on my iPhone (4,000). I'm nervous to delete all my photos b

  • Call a sub VI VI main

    Hello As title, I have a lot of sub vi in a main vi, is there any method I can call one of them by sub name of vi? Currently I use test cases to define all the sub name of vi, I think it is too complicated for my autonomous work in the future. Thank

  • Unknown files

    What is 'UtilityOnlineMarch09' and $Windows, ~ BT

  • Import the project as a result of project makefile by mistake

    Hello I followed the steps described in this link to import a project c / c++. https://developer.BlackBerry.com/native/beta/documentation/com.QNX.doc.native_sdk.QuickStart/topic/i... but it gives me this error: make: * [all] error 2 C/C++ problem sol

  • BlackBerry Smartphones Blueant S4

    My daughter has a Blackberry Bold 9650.  I want to get him a car bluetooth speaker.  One that really interests me is the Blueant S4.  The only question I have is the Bold 9650 supports all features (voice dialing over bluetooth) which offers the s4?