HP p6-2130: my computer already has a network card installed?

Similar Questions

• Just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without certificate

  wireless problem

  just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without a certificate, any siggestions would be welcome

  Tom

  Hello, Bill Bates,.

  I would say to contact support with their router blank:
  https://help.virginmedia.com/system/selfservice.controller?configuration=1002&PARTITION_ID=1&TIMEZONE_OFFSET=&usertype=1&VM_CUSTOMER_TYPE=&cmd=ESCALATION_REQUEST

• The Linux host, guest of WinXP, host has 2 network cards, how to choose which NETWORK adapter to use?

  I know it's something of an FAQ, but several hours spent on these forums and Google search gave me nothing of what works.

  All the solutions I've seen assume Windows as host and (something) as a guest.

  In my case, the host is Linux (CentOS 6.4) and invited is Windows XP.

  The host has two network cards, one on a 10.x.x.x network and the other on 192.168.x.x network.  In the guest virtual network adapter connects to the network 10.x.x.x.  I want it on 192.168.x.x network.

  I would be happy if I added another virtual network card and one of them connected to each network, but two of them connect to the 10.x.x.x network (with 10.x.x.x different IP numbers).

  The solutions I've seen indicate that under the Virtual Machine-> network adapter settings-> network connection, you click on the button "Configure the adapter" and load of come from there.  It would be great, but I have no button "Configure the adapter" or something like that.  I have a button "Advanced", but that just allows me traffic into and out of the butterfly and set a new MAC address, that's all.

  Because the host is Linux, I have also no equivalent to vmnetcfg.exe, at least none that I can find.

  So, where should I go from here?

  VMware Player is the version 6.0.0 (freshly upgraded 5.0.2 this afternoon).  I tried with version 5.0.2 and got the same thing.

  Thank you...

  Eric / www.rkt-tech.com

  You will need to use the virtual network Editor, although first you may need to create symbolic links.

  The first symbolic link already exist in a Terminal using the following command. Note: If connected a root the sudo command is not necessary when the.  Tip: Copy and paste the commands!

  ls-l/usr/lib/vmware/bin/vmware-netcfg

  If it exists, the output should be similar to the following.

  lrwxrwxrwx 1 root root 13 29 Sep 08:17 / usr/lib/vmware/bin/vmware - netcfg->/usr/lib/vmware/bin/appLoader

  At this point, you can simply use the following command to bring the virtual network Editor.

  sudo/usr/lib/vmware/bin/vmware-netcfg

  However, if you want easier access creates a symbolic link in: / usr/bin

  sudo ln-s/usr/lib/vmware/bin/vmware-netcfg/usr/bin/vmware-netcfg

  If the symbolic link/usr/bin/vmware-netcfg does not exist, then use the following command.

  sudo ln-s/usr/lib/vmware/bin/appLoader/usr/lib/vmware/bin/vmware-netcfg

  Then, to facilitate access to create a symbolic link in: / usr/bin

  sudo ln-s/usr/lib/vmware/bin/vmware-netcfg/usr/bin/vmware-netcfg

  To bring up the virtual network in a Terminal editor use the following command.

  sudo vmware-netcfg

  In the virtual network editor disable automatic bypass on vmnet0 by selecting the network map target in the bridge to: list box.

• Message appear conflict of IP address at startup. Another computer already uses the network with the same IP address. How do I cure this?

  When my kids play online on the X - Box I get an error message on my laptop when I start after them. It is said there is an IP address conflict and that another device is already on the network with the same IP address. It does not affect me access internet even if. How can I fix thi.

  Hello

  1. which is the version of Windows installed on the computer? For example, Windows 7, Vista

  2. only the error message appears only when the Xbox is connected to the computer or at both times?

  3. have you made any software or changes to the material on the computer before this problem?

  Please answer these questions and provide additional information so that we can better guide you.

• Please can you tell me how DISABLE DELETE Firefox as my computer already has too much 'stuff' on this subject?

  Want to know how to REMOVE or DELETE Firefox.

  https://support.Mozilla.com/en-us/KB/uninstalling+Firefox

• If I put more lower memory card on a computer that has the memory card fast (just for the diagnosis of scenario) can damage the computer?

  Hello

  If I put a memory ddr3 or ddr2 has a speed lower than the an origin whch is on the motherboard (just to diagnose the scenario), which would damage the computer?

  Thank you

  Johan

  Hi Johan,.

  DDR2-400 has a transfer rate of 3200 MB/s. DDR2-533 has a transfer rate of 4266 MB/s.

  High speed DDR2 DIMMS are compatible with low speed DDR2 DIMM, although the motherboard or controller memory CPU will be bound to the limits of the low-performance modules.

• I bought a new computer and want to import all the bookmarks from my old computer that has Firefox 6 is installed. How do I do that?

  My old computer using Vista.
  Windows 7 Professional a new.

  Bookmarks > show all bookmarks-> import and backup - Export HTML... - on a USB
  
  then
  
  Bookmarks > show all bookmarks-> import and backup files on this USB - import HTML... -

• HP computer laptop 15-afl54sa: network card for computer HP laptop and the wireless adapter drivers

  Hello

  My name is Andrew and I currently installed the operating system windows 7 on my HP laptop. However, I'm unable to connect to internet via cable and wifi network. I have included all of the hardware ID and my computer laptop make and model below.  Is it not possible for a technician to send me the links required for these special as soon as POSSIBLE drivers. Thank you very much.

  15 - afl54sa
  
  Laptop
  
  [Personal information]
  
  N7J75EA #ABU

  PCI\VEN_10EC & DEV_8136 & SUBSYS_80CB103C & REV_07
  
  
  
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80CB103C
  
  
  
  PCI\VEN_10EC & DEV_8136 & CC_020000
  
  
  
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  
  
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01
  
  
  
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C
  
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  
  PCI\VEN_14E4 & DEV_4365 & CC_0280
  
  
  
  
  
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
  
  
  
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
  
  PCI\VEN_1022 & DEV_1537 & CC_108000
  
  PCI\VEN_1022 & DEV_1537 & CC_1080
  
  
  
  PCI\VEN_1022 & DEV_780B & SUBSYS_80CB103C & REV_42
  
  PCI\VEN_1022 & DEV_780B & SUBSYS_80CB103C
  
  PCI\VEN_1022 & DEV_780B & CC_0C0500
  
  PCI\VEN_1022 & DEV_780B & CC_0C05
  
  
  
  PCI\VEN_1022 & DEV_7814 & SUBSYS_80CB103C & REV_11
  
  PCI\VEN_1022 & DEV_7814 & SUBSYS_80CB103C
  
  PCI\VEN_1022 & DEV_7814 & CC_0C0330
  
  PCI\VEN_1022 & DEV_7814 & CC_0C03
  
  
  
  ACPI\SMB0001
  
  * SMB0001
  
  
  
  ACPI\MSFT0101
  
  * MSFT0101

  Hello:

  It is a model that is difficult to install W7 on.

  See if these drivers work...

  PCI\VEN_1022 & DEV_780B install this driver first and then restart.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127691_1

  PCI\VEN_1022 & DEV_7814 installation of these drivers and reboot.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_139250_1&swEnvOid=4058#tab1

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_150879_1

  PCI\VEN_10EC & DEV_8136:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609962&swItemId=ob_148639_1&swEnvOid=4063

  PCI\VEN_14E4 & DEV_4365:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609962&swItemId=ob_151873_1&swEnvOid=4063

  You will also need driver bluetooth for this card template...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_155436_1

  PCI\VEN_1022 & DEV_1537: This driver may need to be manually installed.

  Download and run this driver...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_153451_1

  If it does not automatically install unit above, go to Device Manager and click the controller PCI E/D who need driver.  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp72675.   Make sure that the include subfolders is selected and the driver should install.  Then restart.

  ACPI\SMB000:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609962&swItemId=ob_154783_1&swEnvOid=4063

  ACPI\MSFT0101: There is no W7 drivers for this device because it is only used for certain security features that can't be find in W8.1 and W10.  W8.1 and W10 were the drivers for this device included with the operating system.

  Some books of class cases may have a BIOS setting to disable this security feature, but I doubt that yours is.

  No no not this installed device will have no negative impact on your PC.

• Unable to connect to the Internet, error: this computer does not have a network adapter installed and configured

  Original title: basic computer.

  I have a Dell with windows vista. He has been in place and slow so I reinstalled the program. Now I can't access the internet. I get an error message that says that this computer has a network card installed and configured. I have a linskeys wireless router and we have two laptops that work very well. Don't know what else to do.

  Hello

  Go to the Dell website and download the drivers for your model computer.

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection?FKEY=Drivers_PS

  Use one of your other machines > download and save the drivers, network adapter, etc > copy of Flash Drive > transfer and install them.

  See you soon.

• Can I install on a computer that already has photoshop CS 6 without damaging SC 6.

  I have photoshop CS 6 for students and teachers on my computer already. I felt optimistic about the time and attention that I would have to learn all the complications of a full version.  I used only items in the past and do not have a user experienced and to whom.  I need to quickly edit a few photos of the school.  I can't install the version of the items that I already have without damaging version CS 6?  My installation for CS 6 disc has a small crack in the Center, and I don't know if it will work again.

  Yes, all versions of the Adobe software install in their own separate files on your hard drive and will coexist with happiness.

  If you can install components without interfering with the CS6.

  My installation for CS 6 disc has a small crack in the Center, and I don't know if it will work again.

  Is not serious. You don't really need still other than a coaster of drink. It contains probably obsolete software in any case.

  You can always download the CS6 Installer on Adobe's site when you need to re - install CS6.

  http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

• Catalogue catering to new computer that already has photos

  I understand that I need to backup the catalog on my 'old' computer, install the items and then restore this catalog to the new computer. The 'old' computer had 10 items, I will install 12 items on the computer of 'new '.

  I got my data saved by Carbonite, so when I set up the new computer and restore data from Carbonite, the pictures on the 'old' computer are now on the computer of 'new '.  It seems to me that when I restore the catalog, it will also restore the photos, which will give me duplicates, or I'll have to give permission to each photo must be replaced.

  Should I take pictures on the computer "nine" to another location and then restore the catalog and photos?

  I intend to use the same folder structure.  The pics are in the photo library.  If I need to move photos, can I also move the images folder so that the same folder structure can be restored?

  Thank you

  George Butchee

  The structure of folders, "gouged" suggests you look at "My Folders" view, which is a list in alphabetical order. For the structure of the tree, as in Solution Explorer, click on the yellow litle icon on the right side of the title bar of 'My Folders'. This will show the view "folders." Note that by default, only subfolders with media in the caytalog will be displayed. Right click on the top-level folder opens a context menu, then you can choose to display all empty subfolders included.

• Windows 3.1 can be made to run on a machine that already has Windows XP OS on it?

  I have a legacy written in FORTRAN 77 program. I am trying to load MS FORTRAN Profession Workbench on my computer that has the Windows XP operating system.  But Ms. FORTRAN Professional Workbench runs under Windows 3.1, but I don't know if or how it is possible to run on a computer that already has OS XP.  Any guidance is greatly appreciated it.  Thank you.

  Hello

  Try to run it in DosBox: http://www.dosbox.com/

  And here is some other information I found:

  http://www.techrepublic.com/forums/questions/Fortran/#.

  See you soon.

• When you try to turn on my computer which has windows vista, I get this error code '! 0 * c0190036! 535/95417 (explorer.exe)

  When you try to turn on my computer which has windows vista, I get this error code '! 0 * c0190036! 535/95417 (explorer.exe)

  Hello

  -Remember to make changes to your computer, after which the issue started?

  I would recommend that you follow these steps and check if the problem persists.

  Step 1:

  Start your computer in safe mode.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   

  Step 2:

  If the computer starts in safe mode, there must be a third party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: Put your computer in normal mode (step 7).

  Step 3:

  If you haven't already done so, I would say doing a full scan on your system.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• relocation of cs5 or cs3 both have been upgraded to d/l engraved on asked to insert the cs3 and drive 5 but he was already in the drive I installed to win 10. CS5 has already been installed and turn off before the attempt to re - install. I then tried my

  My computer crashed and I tried to reinstall cs5 or cs3, both have been upgraded to d/l engraved on asked to insert the cs3 and drive 5, but he was already in the drive I installed to win 10. CS5 has already been installed and turn off before the attempt to re - install. I then tried my copy of CS3 same results. Then I tried CS2 it installs and works, but cannot activate online and the phone activation is no longer available it tells me to check the forums?

  First of all, that the software is old enough so that it does not at all with Windows 10... but

  An idea that MAY work to install or run some programs in Windows old 10

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  CS2 (or earlier version) software activation server replacement

  NOTE that CS2 will not install on a Mac "modern."

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• I'm unable to access my LR5.7 of my recent holiday catalog. I am running Windows 7 (64-bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot open another application already has its opening.» Leave the

  I'm unable to access my LR5.7 of my recent holiday catalog. I am running Windows 7 (64-bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot open another application already has its opening.» Leave the other copy of Lightroom before trying to launch' the problem is, that I can see a copy of the open LR5 and cannot locate the "." lrcat.lock"the specific catalog I want to open the file. I tried to re-boot my computer, but it did not work.

  Thanks Geoff. I was finally able to locate the "." lrcat.lock' of the relevant folder to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. Thank you