HP P6000 clubhouse
Hoi
Wie kan mij helpen
Mijn computer niet meer as ie moet doen works
hij Pact mijn herstelschijven niet meer zegt ie dat ik moet contact opnemen met hp
Pact mijn cd backup ook niet hij
en ook dat mijn windows niet geldig zegt is naked moet ik elke keer code opnieuw SELGITUSKIRI
Start hij ook niet meer op met hp maar zwart witte scherm en letters heb er geen ballen verstand van irritating maar floor
Het een orginele hp pc wie kan mij yesterday was me helpen
Als er meer info nodig is hoor ik het wel ik hoop dat iemand mij kan helpen
Deze pc is heel feel voor mij
Jacqueline GR
HEB I geprobeerd puts color recovery partitie van.
Tik herhaaldelijk op F11-toets tijdens het opstarten, kan het een paar pogingen along. Vanaf daar moet I in staat zijn om uw computer you recovering.
Have you tried using the recovery partition.
Repeatedly press the F11 key at startup, it may take a few tries. From there, you should be able to restore your computer.
Tags: HP Desktops
Similar Questions
-
I have just connected my old office a hp 2755 Clubhouse. The problem is that I don't have the ability to access the network. I need to see what I should spend my office, so I can use wireless internet. The modem and connections are in another room, so I need to access the internet only to wireless... Thank you confused user
Hello
If you want to access the Internet wireless, then you must have an adapater wireless connected to the desktop computer and also you should have a router that can trasmit wireless signals. Therefore, buy a USB wireless adapter that must be connected to your desktop computer and will allow your office to connect to wireless internet.
-
HP Pavilion P6000 series (MN: p6710cs-m)
Hi guys
I have some problems with this desktop computer. This PC is 1.5 years. I bought an external graphics (GV-R725O5-2gi), but the new GC will not work. I ran the card on an old PC of 5 year with maybe end of 1 PCIe slot that it runs. I have suspected that the card is broken. Stock of 300W power supply, I changed to new 450W. Next step was instalation of the HW on the motherboard, then turn on the PC. This card has no external power supply. The fan on the card works. The PC does not beep ani signals but the screan is black and the PC is no W7 boot. I also have an old (Inno3d GF 7300GS) card for testing. I don't know what interface PCIe gen is the GF 7300 GS but the amd's PCIe Gen 3. The PC works and the start-up of W7 with the GF 7300 GS. I chcked the BIOS for Setup, but it is bad for the config. I turn off power save mode or something like that enable this opt: pic. My first idea was compatibility question maybe update BIOS version. But when the GF 7300 GS runs that the BIOS is not the problem I think. It is possible that I have to upgrade the BIOS? my version of the bios (2.10.1206) and the site of product extra have a new version (7.15 A Rev. 3.02 M). Slot PCIe on the PC is 16 X, but the card is only 8 X I have search for PCIe compatibility issues, but CESP 1 standard to the most recent must be compatible. In some cases the PCIe 1 may have some problems. You can put a 3 PCIe Card in a PCIe 2 motherboard and it wil run. Here is the motherboard spec. I think that this configuration should work but I don't know where is the problem. I don't know what to do. I also read a coment in this forum that the older generation of AMD cards worked well on HP Pavilion P6000 serias. Can you help me???
PEAK.
Thanks, Ervin
Based on specifications, your HP p6710cs is four years old and has a PCIe Gen 2.0 x 16 slot. The card you are trying to use is that GEN 3.0 PCIe may require a mother UEFI based that supports a certain level of specification. Please try to older pre-R7/R9 map as the HD 6000 / 7000 series.
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
Clubhouse x 2 10-n100nw: x 2 10-n100nw keyboard remove
Hello.
Three months ago, I bought Clubhouse 2 x 10-n100nw. At first, everything was OK, but as I used it for awhile now, I've noticed that will want to use it on my bed or any sweeter place, keyboard, where also additional hard drive is placed, detaches. In addition, the expansive even occurs when I try to type anything without any hard place to put the laptop. Is this a problem with the connection between the keyboard and the screen? It seems too short to connect properly those. Maybe it's nothing, but sometimes I really need to work on the bed and he casuses of problems such as: programs installed on additional planting, hard drive etc.
What could be a solution?
Kind regards!
Hi@M_Horreur,
Welcome to HP Forums forums. One-stop shop for all kinds of solutions, tips, and tweaks for your questions/problems.
For the best experience on HP forum, see our Guide to HP Forums to learn more.
Unstable connection to the keyboard dock. Is this fair?
I will definitely help you.
The laptop needs a hard, sturdy surface to rest because he has to balance the weight of the screen.
Any uneven surface, it could cause the imbalance of weight as a result of disconnects from the slot and port.
Please use the link below for more details of the same.
Browse the 'Security WARNING notice' sentence that explains the need for a hard surface for the PC to use.
Let me know how it goes.
Resolv_S
Happy to help you. I work for HP
Please click "Accept as Solution" if you feel my post solved your problem, it will help others find the solution.
Click on ' Bravo Thumbs Up ' to say 'Thank you' to help! -
Upgrade HP Pavilion P6000 series
Hello, I think the upgrade of processor for play in the settings 'Ultra' for various games such as Diablo 3, World of Warcraft and Guild Wars 2 and graphics card in my computer. I'll list the product name and number, the map graphics, processor, motherboard and monitor type. Any additional necessary information please ask. I'm looking to upgrade the processor and graphics compatible with my motherboard.
Windows 7
The product name and number:
HP Pavilion series P6000
BV532AAR #ABA
Current motherboard:
FOXCONN 2AB1
Card adapter/graphic of the current view:
ATI Radeon HD 4200
Current processor:
AMD Phenom II X 4 840 T with 2.90 GHz, 64-bit, four hearts
Monitor:
ViewSonic VX2739 series at 1920 x 1080 p
Hello
Consult thispublication of documentfor general information on the selection of a video card.
I would not recommend an upgrade of the processor until you install a new video card. Upgrading the CPU may be an unnecessary expense.
The P6000 PC has only a power supply 250 watt so that will have to be replaced. I would look at the Corsair CX600 because it has the power and the appropriate physical dimensions.
Ultra settings can be a little complicated depending on the game. I use the NVIDIA GTX 460 with some modern games (COD, BF3 and HAWX 2) with parameters utra without problems. Right now, I recommend the Sapphire HD 6870. The 6870 is better than the 460, so you shouldn't have any problems.
' HP ' how-to ' articles should be useful.
-
HP P6000 - model: P6624y
Hello
My HP Pavilion P6000 - model: 6624y
I lost my recovery disc. If someone would direct to download me an if it is available.
Thank you
WNDI seems that HP has defined recovery media. GO to THIS PAGEand scroll down to "the order recovery media.
The cost is usually not much $25 - $30
-
Exchange of energy supply a m9350f to a p6000
I want to add the hard drive of a m9350f p6000 unit.
Power supply(5188-2625) of the p6000 doesn't have enough connectors, so I would take the
power of the m9350f(5188-2862) and replace it.
The p6000 will accept this power? If so, there other things to do to achieve this?
Thanks in advance,
ivsl
You are welcome.
If the DVD and hard drive are both connected now, disconnect them and use the 'Y' to connect the new drive. You would make two cables one.
If the p6000 POWER supply does not have so much power, the Exchange would be better.
-
Pavilion p6000: upgrading Pavilion p6000
Hi, I just got the Pavilion p6000 on ebay for around $ 200 and I want to change the graphics card and possibly add more ram. So I would like to know if it is correct to what I intend to do.
There is some information about the computer that I know:
: HP Pavilion p6000 series
Product number: BT493AA #ABC
Motherboard: N-Alvorix-RS880-formfat (Alvorix)
RAM: 4096Mb non ecc
Processor: AMD Athlon (TM) II X 3 445 CPU (CPU 3), ~3.1GHz
Graphics card: ATI Radeon HD 4200 (1916 MB)
I would like to know if I could use a Nvidia GTX 980 graphics card and what is the maximum RAM (ram) the motherboard can support on a 64 bit system.
Thanks in advance.
Hello
You can search the forum "Alvorix" and see what has been already stated.
-
HP Clubhouse G6 problem starting 64-BIT (Windows 8)
HP G6 8 64-BIT Windows clubhouse
PRODUCT: C4M16EA #ABU
MODEL: g6-2241saWhen starting my laptop I get the message ' Loading/Starting Windows' or 'prepare auto repair.
It will always stay as such indefinatly.
My keyboard is also sense is unresponsive, I can't access all the screens that can help, even if for some reason any 'ctrl + alt + del' seems to work before the HP Logo loads, but causes just the laptop to reboot.
I tried to turn my cell phone off, remove the power cable and the battery, now the power button for 15 seconds, plug the power cable while leaving the battery and pressing the power button to turn it on, but nothing.
Now, this problem seems occor after the fall of the battery, I suppose that he would be wrong with the clips.
but before even the pack fell, the laptop started to freeze, for the first time since I bought it, unfortunaty battery fell as he was frozen, adding probably more to the struggle of laptops every start.
as I'm just young and still in education I am not proven flexible meaning I don't have an income either.
So if I need to replace my laptop or any computer component of such, please suggest the cheapest possible you...
Thank you.
Unfortunately, my warranty has expired, I thought I was doing he extended but a year and a half, according to moore's law, I should be able to buy a brand knew portable with double technology for the same price as this one. So I decided just let expire and take care of it.
But overall, the problem has been solved, I left my laptop on one night while I was sleeping and it fixed itself, I guess it was just a matter of waiting.
In the future, I'll wait and see what happenes before posting for help here.
Thanks a lot for your suggestion however.
(I don't know how to mark a thread as solved or resolved).
-
Driver problems Clubhouse g6-2240sh
Hello!
I bought a g6-2240sh computer laptop yesterday Clubhouse!
Windows 7 Ultimate has been installed on it. I realized the hp site that make the driver I remove but ran into problems!
The problem is this: there are only supported above abandoned by Windows 8 pilots, managed to get a large part but not the ethernet card and the video driver for the bus series / usb / drivers not!
Those who have an idea of what to do, please help!
Thanks in advance for your answers.Hello:
He has only W7 x 64 drivers for this model of the graphical interface of your laptop.
You can use all W7x64 drivers and software for this model.
For the graphics, you install only the graphics drivers AMD, who will install the drivers for the Intel and AMD notebook graphics cards.
DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK
I see that your laptop computer equipped with Bluetooth. If your laptop has a Ralink WiFi card, then you must use the Ralink Bluetooth software and driver.
-
HP pavilion p6000: memory upgrade
Have a Pavilion p6000, SN MXX0490MHH, product # BT543AA #ABA. Provided 4 x 2 GB with 8 GB of ram installed on the chips. Operating system is Windows 8.1. Upgrade to 16 GB and bought 4 x 4 GB DDR3 1333 MHz, DIMM parts. Does not seem to accept the new memory. Question: Is this good memory, and this system will support 16 GB.
Hello
Explain what "is not except" means. Windows is not except the new memory or the BIOS does not recognize the memory or the PC does not start with the new memory?
We cannot answer your question, given the information you have posted. You can certainly search the forum for others who may or may not have success the upgrade of your particular PC model to 16 GB.
Try to clear the CMOS memory. If this does not solve the problem then test each one dimm at a time. Don't forget, with the former PC HP DIMMs need to be a game.
Try this memory bootable Diagnostics CD. Download memtest86 iso file and burn the disk using Imgburn.
Memtest86 4.20 more Installer USB. Test each dimm one at a time then as a complete set.
-
Clubhouse dv7 notebook memory upgrade
I'm doing an upgrade memory on a clubhouse dv7 notebook and the back is solid. How can I replace the RAM?
Hello:
Here is the link to the service manual for your laptop.
Chapter 4 are the procedures for removal and replacement.
http://h10032.www1.HP.com/CTG/manual/c03099448.PDF
Paul
-
No Pavilion P6000 desktop no signal to follow after the lightning
I had a lightning which has taken on my desktop HP P6000 computer.
The model number is QN641AA.
It would not be a signal to the screen. I left the power cord DVI on the graphics card to the motherboard DVI port and it worked for a few minutes.
I replaced the motherboard with a modernized one and a new graphics card. The renovated is not the same, there a few more places to plug things in exacptly. It is supposed to be compatible and it's HP.
I also replaced the processor with a new since I damaged the old a. He has been blocked for the cooling fans and I broke 2 pins.
I don't always get a signal. The hard drive is running, I can hear it. There are no beeps and no lights on the keyboard.
Any ideas?
I took it to a computer store. The guy he just tested and said that it's a bad mother "renovated".
He said he gets a lot of people bringing them after that that they install 'renovated' mothers purchased online to E - Bay.
He said he thinks he gets as much is because online sellers made test used motherboards that they sell as "refurbished". They just plug in the power outlet and if the LED lights, they say, it's OK.
-
How to install windows 7 in windows pre-installed 8 hp Clubhouse 15-B001EE
How to install windows 7 in windows pre-installed 8 hp Clubhouse 15-B001EE
She asked first on a pilot
So I removed the harddesk and installed windows 8 on the other PC. When I returned the harddest computer and just when to start loading windows it gives me a blue screen
Don't know what to do because I removed the recovery partation
Hello:
See if it works for you...
Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).
Extract the files on a usb flash drive.
With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.
After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.
You should now see the storage driver files listed.
If you check the box, it only includes the compatible driver.
Follow the prompts and hopefully, W7 should install.
-
Como quitar contrasena del del BIOS hp ze4300 clubhouse
Hola, Necesito UN saber como quitar contrasena del Bios del portatil hp ze4300 clubhouse, are that I need formatear y cuando voy an entrar al setup me pide clave. Gracias
Me dijeron quitando her pila del CMOS themselves could remove the clave tenia el SETUP para luego poder formatear mi portatil pero luego varios question, quite her pila y lo connected several veces pero NADA... no satisfied esto!
Maybe you are looking for
-
How to delete the web address that appears at the top of the page on all my printed documents?
When good impression in a program called Red Cheetah we web address at the top of the page. How to remove theis information?
-
Broken Fan on the heatsink for Pavilion e9110t
Editing for this heater broke causing the CPU overheating and close. The part # for the fan of 1322-006D0H2 but it seems his is no longer recognized. Someone can suggest a suitable replacement or can any fan heatsink 3inch work on this? Thank you
-
Satellite C660D boot - update of the BIOS has not
Hello In recent days, I get a blue screen of death with the error 'whea_uncorrectable_error', I read something about the BIOS update, because the error is probably caused by the previous version of the BIOS. I gave the updated correctly, but as soon
-
Required: a portable charger for an iPhone 4 that can be used in Germany and the United States
Required: a portable charger for an iPhone 4 that can be used in Germany and the United States Does anyone have recommendations?
-
X 220 hotkeys not working do not since the system update
Hello I used the system update this morning and checked all the updates, including the newest driver Intel for my X 220. After that, most of the Fn keys and the info on the screen has stopped working. I uninstalled the Intel driver and Hotkey driver