HP Pavilion 15 laptop: Cannot install the driver/adapter wifi

Similar Questions

• Re: Satellite L850-1EK: win 7 - cannot install the driver for Wifi

  Hello! I hope someone can help!

  Bought a reconditioned model Toshiba L850-1EK of PC World in Novemember - its been great! so much better than my old netbook! Lighter too!

  However, due to a media blank Superhub that keeps falling speed wifi, I remembered something that worked on my old laptop - uninstall the wifi adapter in the Device Manager and have windows "find" and reinstall/update driver. This, you will agree, was a mistake.

  Annoyingly, the driver was not installed correctly (the popup box said this) and each time I try another driver even if Toshiba, Atheros or Google, none will work correctly - if she is completely installed, there is still no wifi (impossible to find networks - as if the wifi is turned off).

  Also tried activating / disabling the wifi enabled, deactivation / activation of the adapter directly, connect the network cable to find other versions of the driver (as above), even the system restore did not work as he could not find a file, then it did not restore.

  Is there a driver especially L850 ships with? At my wit's end! The driver gets up in what concerns the Atheros AR9485WB-EG

  Plans currently do a full backup/restore - a system of image recovery should replace all good, right? Back at the factory-fresh, with working wifi?

  Would have done this if my external drive was big enough for a full system image, or if my LaCie ethernet disk had USB... sigh.

  If anyone can help, let me know!
  Thanks for reading,
  Coz.
  tendermonster (at) gmail (dot) com

  Your WiFi chip should be Atheros b/g/n WB225 BT support also.
  If you need an Atheros WLan card driver.

  Visit the page of the Toshiba UE driver
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?

  Choose:
  Satellite
  Satellite L series
  Satellite L850
  PSKDGE

  Check now the Atheros WLan drivers available

  By the way: what Windows system do you use?

• Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

  Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

  I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

  Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

  This solved my problems. Good luck with yours.

• HP Pavilion dm4 2165dx: cannot install the wireless driver

  I improve my OS to windows 7. While trying to install the drivers, everything has been installed successfully except the wireless. I tried all the drivers wireless for my product and he just immediately close after extraction. I also tried Windows 8.1 and tried to install wireless driver for the operating system but has always failed.

  HP Pavilion dm4 2165dx

  Windows 7 Ultimate 64 Bit

  Hello:

  You should see a device labeled network controller listed under other devices in Device Manager if necessary the driver wireless card.

  There is something wrong.

  1. the wireless card needs the HP Connection Manager software installed so it can be activated by using the software, then you should be able to install the driver or the Terminator post will be installed.

  HP connection manager

  File name: sp54945.exe

  2. the wireless card is bad and must be replaced, or must be removed and reinstalled because of an oxidized connection.

  3. the motherboard is bad.

  Also install software quick launch to ensure that all Fn keys work correctly.  There's a chance outside that might be the problem, but I doubt it.

  HP Quick Launch software

  File name: sp54001.exe

• Cannot install the driver for Radeon R5 230 graphics card in laptop Lenovo G50-40 with AMD APU A8

  Hello everyone.

  My name is Manu.

  Recently, I bought a laptop computer lenovo G50-40. The specifications are the following:

  8 GB RAM

  1 TB HARD DRIVE

  AMD Quad Core APU A8

  Card Radeon R5 M230 chart with graphic 2 GB memory card

  I installed Windows 8 Enterprise 64 - Bit Edition. The problem that I am facing is that I'm not able to install the drivers for the graphics M230 R5. I've updated the BIOS, tried to download the latest drivers from the Web of AMD site too. Yet, the system is simply not recognize hardware. The screenshot below should give you the image:

  

  It appears as a video controller. But I can't install the driver even after you use the update driver option. Please help me.

  Concerning

  Mahesh

  Well, what I did downgrade from windows 7.1 and the drivers worked well. I was a bit hesitant on windows 8.1 and there is no upgrade to Windows 8 Enterprise anyway. The games are now place beautifully. Thank you guys.

• Pavilion dv3: cannot install the driver for graphics (Clubhouse dv3)

  Hello! I can't find and install the driver for graphics card. I see on the device manager that without "ATI radeon 5400 series.

  someone help me! Thank you

  Hi @QuanTrinh

  Welcome to the Forums of HP Support! I want you to meet some problems to find a graphics driver. I'll be happy to help you with that. Let me start by getting your product number , there are a number of dv3 models in this series. I also need to confirm that you are using Windows 7 32 - bit as well.

• L750D-14R satellite - cannot install the driver for the TouchPad Win7

  Hello

  I have a problem with drivers for the touchpad. I downloaded v 15.2.11.1 Synaptics and me couldn't install them.
  "Installation of Synaptics (sync TP) ranked" I've got Windows 7 x 64. I've looked everywhere but I can't find any information on this problem.

  If someone knows what can go wrong and how can I fix this problem I would appriciate it.

  Never had any problems with installing the touchpad driver.
  I guess its not the touchpad driver problem but the problem with your system.

  First, you must uninstall the old driver for the touchpad.
  This can be done in the control panel-> programs & features

  Clean the system using some freeware like for instance CCLeaner tools.
  Restart the laptop between procedures.

  Then download driver Synaptics driver Toshiba UE page.
  Alternatively, you can try to install the driver for the Synaptics driver page: http://www.synaptics.com/resources/drivers
  In my case it worked and this driver has added some additional options that I would change in the Synaptics touchpad settings

• Satellite A100-599 - cannot install the driver for nVidia GeForce Go 7600 graphics card

  Greetings to all!

  Try to install the driver for Nvidia GeForce Go 7600 after reinstallation of the entire system, but without success. Only safe mode is available after this pilot plant, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result always :(

  Would be happy to be aware of how this problem... Thank you very much.
  Satellite A100-599
  Current OS: Windpws Vista Home premium sp1.

  Post edited by: Airtoground

  Hey,.

  > but without success.
  Does that mean exactly? You get an error during installation or what exactly is going on?

  > Only safe mode is available after the installation of this driver
  Why only safe mode is available? What happens if you start Windows in normal mode?

  And before you start a lengthy discussion: what laptop do you have?

  You may notice no problem if you install Windows recovery disk Toshiba?

• Cannot install the driver/software package

  HI (sorry for my English, I'm a Spanish speaker).

  I have an all in a psc 1315 and cannot install the software/driver from the site in a new 32-bit Windows 7 PC.

  I tried everything I could find in the forum and on the outside.

  I downloaded the driver from:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=ES&CC=ar&DLC=es&sw_lang=&product=3745...

  and it can run fine.

  When the instalation starts fine, after the license agreement, when the installation is always "system analysis", he shutdow. Close the installation without an error message. Don't just run the next step.

  So I can't install anything, can not get the HP Solution Center and other software for analysis.

  Is not the antivirus, I tried to close the shields in time, not if.

  I guess the Installer (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) in the site's just failed.

  I extraxt .exe files and tried to install the Solution Center in the "setup" folder inside, don't let me do. And it has a lot of files with configurations of software I don't know what I need those.

  Can I connect the printer without the software, while adding in windows and it works for printing and browse the WIA, but in this way the "Scan" button on the HP psc 1315 do not work.

  Hello

  Still, the installation problem you are facing, in order to avoid any installation problem, please also make sure that the USB printer is disconnected, enter the control panel > devices and printers, remove any printer PSC 1310 listed and restart the PC before the installation.

  And regarding the specific error:

  Start the installation and follow the steps.

  Once reached the license agreement window, click the 2nd link above (using the Internet).

  Make sure that the two options set as No, thank you.

  Accept the license agreementt continue following the install.

  You see a difference by changing these settings?

  Kind regards

  Shlomi

• HP Laserjet M1522 nf - cannot install the driver (print spooler is stopped)

  -installed driver using the installation disc, but when I tried to add the printer to the wireless network, all THE existing definitions of the printer disappeared and print spooler has stopped. I restart the spooler, but when I try to install the driver, the error message says "cannot install printer - Print Spooler App stopped. Please start the spooler or restart the computer. ") Operating system Vista).  I've upgraded to Windows 7, but the problem persists.

  So is the printer connected to the router or you are going through the router to a shared printer on another computer.

  Whatever it is, the printer driver must be executed in the process of printisolationhost rather than the spoolsv process if the spooler will not process that is corrupting the print driver.

  When you have Pro and Ultimate is easy.  If you have home made me know if gpedit.msc launches Group Policy Editor.

  For Pro and home run printmanagement.msc

  Drivers, find the 1522, right click, pilot of isolation, isolated

  Now, start the spooler service.  Since the driver does not work, you must remove it by using any HP software used to install the driver.  Normally in the programs, you can find the installation of HP and select uninstall.  Reset.  HP.com head, pick up the HP driver published last month and start again

  version 4.3

  4.3 March 23, 2010

  220,7

  March 23, 2010
  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Cannot install the driver for Deskjet F4500

  I get the error message: "the system cannot find the specified file' where to install the driver for F4500 to a new race of ASUS ZEN widows 7 64 bit and install then fails." Everything works fine on my old Lenovo (also Windows 7). Help!

  You try to use disk or have you downloaded the latest drivers on the website of HP series?

  Here is the latest version of the drivers for your printer and the full OS features:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-73705-2&cc=us&DLC=en&LC=en&OS=4063&product=3944758&sw_lang=

• Error 39 XP on dat72 tape driver code - cannot install the driver

  Help! In an IBM computer running Windows XP Pro SP 3 I am looking to replace a defective DAT72 IBM (Seagate) drive with another band DAT tape drive - the replacement drive came from Dell, but it's the exact same Seagate drive. For some reason, the new tape drive is first detected as a Seagate drive, then askes for a quantum qdatwin.sys file - the former disc one driver IBM). I downloaded the latest drivers for Quantum, Dell and IBM, and any driver I install I get the same message that "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I should mention that when I started this process trhe CD player had mysteriously disappered. I had the Code 39 error on the CD player as well at the time - but not on the tape drive. I went to States support of info on it and choose the "have them fix it" (or whatever it is) and it did fix (problem of CD which is). Now it seems I have the same problem with the Unwinder - but I can't find any info on how to fix this. Also, I tried resdtorign the computer at a checkpoint before the problems started - not question how I chose, I get the same error Windows cannot restore to the restore point - choose another. I tried 7 different restore points with the same results. I ran a full antivirus scan who come clean. Furthermore, I use Acronis backup software that does not all drivers of his own band - it relies on the drivers for the tape drive. Everything worked fine for a good year before it happened. At the end of my rope here.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Photosmart C410A: Cannot install the Driver

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD APU A8-3820 with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5844
  Graphics card: AMD Radeon HD 6550D, 256 MB
  Hard disks: C: Total - Mo 940455, Free - Mo 855102; H: total - Mo 305234, Free - 170309 MB; Total I: - 7 MB, free - 0 MB;
  Motherboard: gateway, SX2370
  Antivirus: Norton Internet Security, updated and activated

  Apparently after a Windows Update, computer of my wife, which is connected to our printer via ethernet through our Linksys E3000 router connection, lost that connection. As the driver was out of date anyway, I downloaded just the updated driver and tried to install it after checking that all traces of the old version have been removed using the HP uninstaller program.

  Inummerable times today, tried to install the driver. I either get the the point where installation asks what kind of connection I have and when it shows via ethernet I get an error message about the MpsSvc (Windows 7 firewall) be stopped or the installation fails generate a message that says missing a setupfile. I tried to disable the firewall in Norton Internet Security and AV and the installation always fails. I tried to turn on the Windows Firewall, via the the Task Manager (with the NIS firewall off) nothing works.

  One of the solutions I found on this forum with an HP Expert was to use the complete package to install the driver. Even if I'm NOT all the programs that come with it (there is the possibility to choose what you wanted but not more) I tried. I still received the message to set firewall scenario and then had to uninstall all the programs I didn't want in the first place.

  There are two other computers in the House connected wireless to the printer and both work very well. I even tried the road wireless with this computer, nothing is done.

  I know I'm not the only one we encounter this problem as I saw other postings but I have yet to see a solution that works. I'm trying not to get both frustrated and angry but it must be an otherwise difficult problem to solve. Before the update Windows and update the driver of HP, this computer worked fine with this printer. There is a conflict between HP software and Windows 7. Please give me a solution that actually works.

  I finally found a relatively simple solution that worked. First of all, I unzipped the driver of a CD-based package. Then, I clicked on the Start button and open "devices and printers". Then I clcked on "add a printer".  I chose "add a network printer". As Windows did not have the selected HP C410a among the choices of the printer, I have disk driver and connected to the CD file. Windows finds the driver, installed and everything works as it should. Certainly, the icon of the printer is not the C410A but all the functionality of software works so I don't care.

  On my wife's computer, I followed the same procedure except that I chose the option "Local printer", as his office is connected to the router via an ethernet cable. For some reason, his computer also had the HP C410A among printers whose drivers available and Windows loading automatically good. Everything is fine with his computer in terms be able to print. Again, not the cool little icon C410A under "Devices and printers", but it works.

  The really good part of doing it this way is that I didn't have to install all the unwanted HP softerware which comes with the "complete package".

  I appreciate everyone's help.

• OfficeJet Pro l7580 on Windows 8: cannot install the driver

  Try to install the full 64-bit of Windows 8 funtion driver to restore the analysis features

  OfficeJet Pro l7580 (connected ethernet)

  Windows 8 64 bit (clean install)

  Everything worked fine on Win7 64 bit

  Print with 8 default windows driver

  When you install the driver, the driver installation tells me to "uninstall L7300.

  I do not have a L7300, and the printer's ethernet, not USB connected.  I unplugged from the wall and ethernet, but can not go past this error message to install the complete driver.

  The driver might be broken, but I am betting that Windows 8 regenerate the problem will be solved.

  Do a Refresh of Windows 8:

  1. Stand the mouse at the bottom or top right of the screen (if you have a touchscreen, you can slide your finger to the right of the screen to the left) to bring up the bar of charms.
  2. Click settings.
  3. Click on ' change computer setting "below.
  4. Click general.
  5. Scroll down to "Refresh your PC without affecting your files" and click on "Get Started" after that.
  6. Who should start a wizard that will guide you through the update process.

• Cannot install the driver for DV6-6c11nr wireless network

  OK, I've been on this thing for the last hours 8 tries to install the driver for wireless network.  I downloaded all the drivers from the HP website and whenever I try to install the downloaded file, it opens, then closes without installing.  I can't say I'm surprised because I've always had problems with the HP drivers, but this one is by far the worst.  Bluetooth driver also did the same thing and miss me the bus sm with usb driver that is not listed on the site.  I went to the website of ralink unsuccessfully.  I have a new install of windows 7 ultimate with all windows updates installed.  Any help would be greatly appreciated.

  Hello

  Download and install:

  • Graphics driver AMD from here.
  • Realtek Wlan driver here
  • Here validity fingerrint sensor driver
  • AMD USB 3.0 driver from here

  If you will ask you to restart the system after you install a driver, please do it before you install the other.