HP pavilion 15-n005sx: Find sata cable model

Similar Questions

• need to replace the SATA cable, cannot find the right

  Hello

  My HARD drive to my motherboard sata cable is broken and I need to replace it and I can't find the right cable, I hope you guys could help me and give me the correct link, I would like to buy an alternative and not of HP parts store

  I have a hp pavilion 2255sb g7

  Thanks for the help!

  Jonathan

  Here is the part number you are looking for:

  Not illustrated material hard drive Kit (includes hard drive support and support)

• Pavilion a1700n: expansion of SATA for Pavilion a1700n

  How can I add a SATA drive to my desktop? I opened the computer and tried to juggle the SATA drive in the Bay, but do not have enough access to fix the 4 small screws. I tried to open a SIDE PANEL for GREEN, who seemed to be locking drive Bay. After reading the Pg 17 of the guide, I will try to identify the open with a screwdriver. Next problem: I found a SATA connector spare but a single POWER cable which is already set on the HARD disk. Is there an another power cable? I'll keep looking, but it must also attach to the motherboard - where?   There is of course the strap connectors master slave, but these do not have SATA connectors. When I get the above with your help, is there any necessary reconfiguration or MS 7 automatically detects the new SATA? Can I use this 256 GB SATA as an extension of memory because I'm already maxed out at 6 GB?  Or am I recorded to use as a shadow to the top?

  Your help would be greatly appreciated. Thanks in advance.

  First of all - the motherboard SATA profits are found down in the lower image irght on THIS PAGE.

  second - the power connector can be a bit harder to find.  If there is no other power SATA cables, then maybe an adapter will help you.  If there is a spare Molex power connector, you will need an adapter SIMILAR TO THE.  If not, then maybe A SPLITTER would be an option.

  Third - SATA drives should not normally the master/slave settings.

  As long as the ordinary reader works, then the added disc must be considered as additional storage space.  Assuming that MS 7 means that Windows 7, then it should recognize the drive.  It may take formatted to be usable.

• For HP 2000 protable PC sata cable

  I need to drive hard sata cable, I see some on ebay p #(informations personnelles par modérateur) but the part # on mine is (personal information by moderator) will one on ebay work? or how to make the right cable?

  Model HP 2000

  Hello

  You buy the right part. You can buy the right part of the store of the part:

  http://PartSurfer.HP.com/search.aspx

  Kind regards.

• HP dv7 6058eo second hardrive / sata cable

  Hallo

  where I can find kit sata cable to my second hardrive?

  Please consult the service manual (Page #56)

  http://h10032.www1.HP.com/CTG/manual/c02842278.PDF

  The manufacturer is 641306-001 , which can be ordered here

• The color of the SATA cables is important?

  Hello

  Can someone tell me if the color of the SATA data cables is important?

  I have a new Dell Vostro 270 MT and I took an old HDD from my old PC and installed in a new.  The new machine is a piece of spare SATA data cable so I took one of the old machine.  On both computers, data cables were blue to connect HARD drive and orange to connect to the DVD player.

  I had to use the orange wire from the old machine because the blue was not long enough.  Everything seems fine, the old HDD works well in the new machine.

  I don't see anything on the internet that implies that there could be a difference.  It seemed just strange that Dell use the same color scheme on two different models several years apart.  My concern is that in ignorance, I do something stupid.

  Anyone can shed some light on this?  Thank you.

  Hi Jackdaw13,

  SATA cables are available in different colours (red, blue, orange). Dell uses orange and blue as the standard for most systems.

  From a technical point of view, there is no difference and no matter what color they are. The functionality remains the same for each of them.

• How can I find this specific model is my Satellite Pro A300?

  I have a portable Satellite Pro A300.
  There should be 3 other characters after the "A300" bit, but I can't work it out.

  I need to know if I can order the good extra memory for it.

  Can anyone help?
  Thank you.

  Check the labels at the bottom of the unit.
  You will find the part model number like for example: PSAJ5E - 005001GR
  The first 6 characters (PSAJ5E) are important.

• Satellite A300-1Affichage (PSAG4E) - can't find SATA drivers for XP installation

  Hello :)

  I am tring to install Windows XP on a Satellite A300-1Affichage as in the object, but it is impossible, because I can't find SATA drivers to install during the installation of Windows XP. In the page drivers I can't find them.

  Can you help me please? Thanks a lot

  Hello

  What is the chipset installed on your laptop? If you post here, I'll try to find the sata drivers. How to decide for you, read here:

  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  You can also install Windows Xp, mode compatible, just switch to AHCI in Bios

• WHERE can I FIND the EXACT MODEL NUMBER for MY Notepad hp2000?

  I have searached through all of the documentation I received with my laptop HP 2000 with windows 8.  I can't find the identification number complete necessary to see if it's a blue tooth enabled.  Where can I find this number?

  Hello:

  Please consult this guide to find the full model # of your laptop.

  http://support.HP.com/us-en/document/c00033108

• Xw8200: Error on Boot to Sata cable

  During startup, the message begins by "mistake of the Sata cable 1796" and indicates the color of the cable and will there be a performance issue. " I have four hard drives and a player.  Anyway, I changed the layout of the insert and what ever I do the mistake of 1796.  In fact, I unplugged all the cables except for the main boot drive - sata and I get error 1796.  And Yes, the Bios is being updated - this machine, Windows 7 Pro works with 32 GB of memory.

  I would like to ignore the message, but I keep losing after starting my G: drive. In fact occasionally when the system starts to run a chkdsk on drive G. No bump in the road. However I'll end by time G drive missing. I then need to reboot to recover the disk G. I ran Chkdsk and SCP.

  Indeed drive G (WD 1 TB), I downloaded the WD Diag utility. All Western Digital drives, past and G drive I even ran the trial extended - and it happened.

  My conclusion is therefore that I defintely need address this situation of cable - and free of any error starting 1796 future. Is there a cure?

  Thank you!

  In several places, I found that the error occurs when the SATA ports are missing something on SATA (0) or SATA (1)

  

• Want 2 13 x: find the full model number

  How can I find the complete model number? I have a product # J9M64UA #ABA but I need the complete model including the info number after desire 2 13 x.

  This is the full model number - HP ENVY x 2 13-j002dx

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on Thumbs Up white on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Want to 700-414: SATA cable to drive 2nd on Envy 700-414

  In seeking to add a second internal drive, there is no motherboard SATA cable.   It's disappointing.  Where can I get a cable?

  Hello

  NewEgg.com or most electronics stores like Best Buy should have SATA data cables.  A cable SATA III about 12 "long should suffice.  In addition, wiil you need 4 x HP Compaq blue screw 6-32 SFF Hard Drive isolation mounting Guide-450712-001.  Review the results of Google for 450712-001.

  These HP How-to - articles should be useful.

• is it possible to set up a dual boot, so I don't have to stop, and then pass the SATA cables that I boot to change?

  Original title: Dual boot

  My XPpro on a former player, was upward. then, I got another new drive, installed Win7Ultimate.  Well, I got the OLD disk works with XP on it.  But, some of these apps DO WORK not on Win7.  so, at least for now, I have two drives installed on the same computer.  is it possible to set up a dual boot, so I don't have to stop, and then pass the SATA cables that I boot to change?   Operating systems already are on 2 different disks.

  Hello

  How to set up a Dual Boot Installation with Windows 7 and XP
  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  Definitive dual-booting guide: Windows 7, Linux, Vista and XP step-by-step
  http://apcmag.com/the_definitive_dualbooting_guide_linux_vista_and_xp_stepbystep.htm

  Dual Boot computer preinstalled Windows 7 with XP
  http://www.howtogeek.com/HOWTO/8790/dual-boot-your-pre-installed-Windows-7-computer-with-XP/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Try to find the exact model of the serial number. Presario 6000 series

  Have the serial number for a desktop computer compact presario 6000 series.  You will find exactly what model number, it is.  Tags are not on the computer windows only certificate.

  Hello

  Please, do not repeat your queries

  Concerning

• Find the esx model

  With commands powercli, how to find the esx model, without changing the Template (in) to vm?

  Thanks for your help

  Get-model | Select Name,@{Name="Host; Expression = {(get-vue $_.)} HostId). Name}}