HP Pavilion 500-164 playing through my TV station

Similar Questions

• HP Pavilion 500-164, upgrade the video card.

  I replaced the power supply in this area for a graphics card into the PCIE slot. I put a Nvidia 9600 GT in the box, not changed no settings, tried to start, and I get no bios and 6 beeps. Any advice?

  Based on specifications, your desktop HP Pavilion 500-164 has been bundled with Windows 8 installed and has a feature called 'Secure Boot'. You must DISABLE "Secure Boot" and ACTIVATE the standby mode 'legacy' in the BIOS before the computer will start with the nVidia 9600 GT installed.

  Please, remove the video card, make changes to the BIOS and turn off the computer. Then, reinstall the video card and turn on the computer. Your problem should be solved.

  Please see Computer Does starts is not after the installation of a videocard (Windows 8) for more information on the subject.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP Pavilion 500-164 recovery disks came with instructions in Spanish, don't read not Spanish

  Good afternoon everyone.   I have a HP pavilion 500-164, barely a month and a hlaf old, which came in a kind of loop to the HP after a few minutes loading screen, a pink screen came up with a frown face alomng with a message that I have never read coiuld because his was too fast. I now have my recovery disks, but they sent the instuctions in Spanish. I do not read Spanish very well at all. I need to know if there is anythign iNeed know are to make this recovery instructions to tell me if I could read smoothly. I hope it's clear enough for yall to get what im saying lol.   Also if someone has a link to the instructions I have but in English please . Thank you for taking the time to read this and have a nice day.     (also can I just throw the disc and it will take care of itself?)  Don't want to screw up this high and still learning everything so if you have info anyu willo help I would very much apreciate. New Z'al

  You are the very welcome.

  You do not have an additional drive or in addition to disks 1-4, there is one labeled accordingly.

  Thus, you would have answered no to the question asking if you have an extra recovery disk.

• HP Pavilion 500-164: the printer error HP Pavilion 500:511 - CPU fan not detected

  I have a HP Pavilion 500-164. Every time I start it, I get a 511 - CPU fan not detected error message.

  At the bottom of the screen, it says F1: Boot

  Then he begins to run smoothly. It becomes annoying.

  Examination of the aircraft, but when I find the two fans running?

  What is the problem and what I take in repairs?

  Hello

  Use a can of compressed air to clean any dust from the fans in the PC.  With the side panel, power on the PC and still observe the rotation speed of the fan.  What do you see? slow, medium, or high speed?

  Open the windows to RUN and enter: MSINFO32

  What level of your PC BIOS runs?

  Install the latest diagnostics for your PC. Start your PC and press ESC then F2 to run a diagnostic.  Run a complete set.

• Remove the hard drive and optical drive on HP pavilion 500-164

  Hello

  I was eager to build a new computer and was hoping to use the hard drive and the optical drive from the Hp Pavilion 500-164 to reduce their costs. I'm confused as to how to remove the optical drive, because I removed the two screws on the left and don't know how to get to the other side as it wouldn't come out. When you remove the hard drive, the SATA cable wouldn't come off, so I stopped here and would like some advice on how to remove the hard drive from its Bay.

  Thank you

  Hello

  Please use the following guide:

  http://support.HP.com/us-en/document/c04100685

  Kind regards.

• Pavilion 500-164: motherboard replacement raises Questions

  
  

  Thanks, Malygris1, for your very comprehensive answer.  Unfortunately, I'm looking forward and installed the new Board of Directors.  For those faced with replacing a motherboard HP, I will elaborate on my trip.  The most important step was in buying for the motherboard.  I have no HP, but from a dealer on Ebay.  I DID, however, carefully note the model of the motherboard AND the designated HP part number of alternatives on a small paper on the motherboard label.  The same motherboard model is used in several models of HP Office; but, if the number of HP spare parts is matched, the info on the model should be on the motherboard.

  My original problems were solved with the installation of the new Council.  After a router struck by lightning, the ethernet port had stopped working, and when told to stop, or in standby mode, the machine would invariably restart.  The new motherboard solved both problems, which seem to be related to the power surge.

  I installed the new Board of Directors of the Windows 10 updated 500-164 and held my breath I have it powered for the first time.  I was pleasantly surprised to see that everything looked the same as when I left it.  Recognized support assistant the new Board of Directors as part of a desktop computer 500-164.  I have not tried; but I hope that the recovery media will work, if necessary.  Malygris1, do you think that if Support Assistant recognizes the info on the model, the recovery disks will work?  I'm curious to know how it works, but, if not, no big deal, as I now have a new image Acronis 10 Windows installation, which works perfectly on the 500-164 Pavilion (without "Pitfalls", as some have reported with audio, etc. of the wireless card.).

  My second concern was whether or not Windows is always activated with the installation of the new Council.  He said that he "Windows is not activated.  ... Rats and other profanity.  I know it can take time to be put in correspondence with the info from Microsoft, so I updated the bios and checked the rest of the ports for the features of the machine.  I returned in configuration/system Panel and he told me that the activation information were "unavailable" - different from the message 'not active' sooner.  I've been waiting on this screen for a few minutes and the message changed to "Windows is activated"!  I was ready to make Microsoft telephone activation and I had run a keyfinder to get the original MS product key for Windows 8 from the hard drive, but I didn't have to use both methods.

  So, in summary, if you want a card mother 'replacement', shop for the exact number of spare parts HP; not only the MFG part number.  It will save you a lot of grief.  Obviously, if you want to 'upgrade' from your motherboard, all bets are off, because it's a totally different scenario with different issues to deal with.  My project was a complete success at a cost of $103 for the new motherboard and several hours of my time.

• the desktop pc Pavilion 500-164 to date of Windows 8 for windows 8.1

  My dealer told me that the 500-164 Pavilion had windows 8.1.  This isn't.  Even if the Assistant on HP site says that it has not been tested, has anyone successfully done?

  Hello:

  I do not have your PC but I don't see any reason why it wouldn't.

  HP provides W8.1 drivers for this model on its support page.

  Before moving to W8.1, I'll make sure to create the W8 recovery media so that if for some reason, something doesn't work well in W8.1, you can restore the operating system and software from the PC to its status of "out of the box.

  And you should do anyway even if you do not upgrade to W8.

  Check out this guide to make your W8 recovery media set.

  http://support.HP.com/us-en/document/c03481733

• HP Pavilion 500-164: the upgrade of the graphics card and power supply on a HP Pavilion 500-164

  I'll be upgrading my HP pavilions integrated HD graphics 8570 D a STRIX ASUS GeForce GTX overclocked 2 GB DDR5 128 - bit DisplayPort HDMI 1 750TI. 4 a/DVI-I graphics card. With that I also improve my diet to a Thermaltake TR2 500W 240 pins power power TR-500. I was wondering if it of ok to do on the computer and will not damage it. It is extra steps when I install these. Initially, I got the PC with windows 8 but have upgraded to windows 10.

  Hello

  If the ASUS 750 TI requires a 6-pin auxiliary power connector and your computer is running a version of HP 8 BIOS then you should be OK.  Open your PC and measure to make sure that graphics card fits.  In addition, open the command RUN and enter: MSINFO32

  Your computer is running a version of HP 8 BIOS?  If so, and if it is possible to install the graphics card then go ahead. Find out what the return policy is before you buy.

  Thanks for posting on the forum.

• Pavilion 500-164: bios update - no option to update

  Fan CPU and PC failure would not start unless the message "Fan failure. Fan has been replaced, but now always make mistake on blue screen BSOD, which reads "WHEA_UNCORRECTABLE_ERROR" and sometimes other errors. Windows tries to start in recovery but BSOD over and over again.

  What I tried:

  (1) reset BIOS default. DONE - behavior even after resetting to BIOS defaults.

  (2) I tried booting from USB drives (several) using the tools of recovery of Linux (Ubuntu Live, Kaspersky, etc.). KERNEL PANIC, etc..

  (3) downloaded BIOS update HP and created update BIOS USB. Restarted with USB (I turned off safe boot, etc. to allow booting USB.) - NOTHING. I tried the two BIOS to run untouched and by going into the BIOS options (by pressing ESC @ boot upward) - none of the options anywhere to read/set the BIOS updated.

  According to a doc Support HP, I tried updating the BIOS of w / in "HP PC Hardware Diagnostics UEFI. The version on this PC is 5.2.2.0 version: I see no option to update UEFI (Flash BIOS). Options like suites: information system, system, testing of components, Test Logs, language Tests, exit.

  What I'm trying next, please?

  BIOS: JA2 v80.35

  CPU: AMD A8-6500

  RAM: 8 GB memory DDR3, DIMM single into the Groove 4.

  NOTE: The system came w / RAM into the Groove 4. Only POST is it RAM DIMM in the location #1. Is this normal?

  Thanks for nothing, Support HP...

• JasmineR mobo in Pavilion 500-164: SATA connections

  Referring to this form:

  http://support.HP.com/us-en/document/c03757575

  The text says 1 SATA connection.  The photo shows the connections SATA 4 (or 6).

  What spec is correct please?  Thank you.

  Hello

  The documentation is incorrect. Must read: 6 x SATA 6 Gb/s, this has been verified by reviewing another source of HP documentation.

  Good fishing!  I ask HP to look at this web page.

• Desktop HP Pavilion 500-164 wifi keeps declining.

  Hello. I just bought this computer two days ago and since last night I seem to have a problem with my wifi. I opened the store and reset my router at least 5 times and my wifi always keeps dropping. I checked for new drivers and checled for the updates on Windows and I updated and restarted my computer several times. All other computers works for me, except that it is wifi keeps dropping. I have no idea why, and I can load barely a minute long video of YouTube in 480 p. Any suggestions? It worked PERFECTLY the first day and a half. Maybe I should get out swap for another at best buy?

  Hey! In fact, I swapped out for the same computer... And it works! Perfectly. ::) Must have been a bad batch, but I appreciate your comments. : )

• Office Pavilion 500-164: usable RAM less installed

  
  

  Hello

  Are you running VM? If so, then change the values of your allowance.

  The operating system may be corrupted which would make the MSCONFIG setting ineffective.   It's a matter of low probability. Although there are values of registry in this case that could be changed, I'll inform normally not posters on how to edit the registry.  Open (admin) command prompt it and enter the following: SFC/scannow

  Restart the PC after the SFC scan process is completed. If the process of SFC scan found errors that it could not correct then reload the operating system using external HP recovery disks.  Don't forget to backup your data.

  Restart your PC and check again the MSCONFIG setting and make sure it is not checked. Repeat the test.

  Try this memory bootable Diagnostics CD. Download memtest86 iso file and burn the disk using Imgburn.

  Memtest86 4.20 more Installer USB.

  It is possible that the new memory is not compatible with your existing memory, even if it seems to be recognized. This happens often.

  That these suggestions in this order:

  Remove the new DIMMs. Start the PC and check the area of material. You should see a small amount in the reserve.  How do you see now in the area of material?

  Clear theCMOSand repeat the test. If no joy, then try the following suggestion.

  Remove old DIMMs and place the new DIMMS in the blue slots.  Clear the CMOS. Repeat the test. You see 16 GB with only a small amount of material area reserve? If no joy, then the DIMM modules are not compatible with your PC.  If OK, now install the original DIMMs in the black sites. Repeat the test.  If no joy, then clear the CMOS and repeat the test.

  If you have reached this point, then I suggest that you return the DIMMs.  See the information below.

  Your first consideration should be Support HP or HP sales during the consideration of upgrades or replacement of memory. If you want to consider other manufacturers of the best way to avoid memory problems is to contact one of the leading manufacturers of memory. I would recommend that you try the tools of these manufacturers: Corsair, Kingston andCrucial. Once you have determined the DIMMs that you need, then contact commercial or technical support to check that you have selected the correct DIMMS. If you buy directly from manufacturers, then they will stand behind their products.

• HP pavilion 500-164 hard drive transfer

  HI I am wanting to replace many components in my computer, but instead of buying a new hard drive and the operating system and the file transfer. There are problems in that I'll run or can I just plug it in and start the computer? If Yes is there everything works that I should not.

  No, if you replace everything else the hard drive, you will not need to reinstall windows. All what you need to do is install the hard drive in the new computer (if there are two sata slots) or buy a caddy and remove the optical drive, the best thing is to buy a hard drive enclosure.

• Pavilion 500-164: new GPU, 6 beeps

  I bought a new PSU (500W) and GPU (Sapphire AMD Radeon R7 265) to replace the integrated graphics card (also AMD), but at the start I'm hearing 6 long beeps cable VGA card does not show anything on the screen. Any help?

  Hello:

  Have you changed the two bios settings must be changed before adding a new card video on a PC that comes with the W8 or newer?

  If this isn't the case, please read the info on the link below for the settings to be changed.

  http://support.HP.com/us-en/document/c03653200

• HP Pavilion 500-164: compatibility cards mothers HP and CPU

  I have read around and would like to know, did I not only upgrade options specified for my CPU, or can I use any socket FM2 CPU?

  Also, it is true that I need to update my BIOS if I want to use the EVGA GTX Superclocked Edition 750Ti?

  (Link to the GFX card: http://www.newegg.com/Product/Product.aspx?Item=N82E16814487024&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Ju... )

  Thank you for your time.

  There may be some intermediate model, but the way it is detailed that list contains all processors Socket FM2.

  These processors are whitelist BIOS supports, in my opinion.