HP Pavilion dv6-7040tx: Pearl of silica gel in the earphone Jack

Similar Questions

• Pavilion dv6: Intel Centrino Wireless N2230 incompatible with the operating system Windows 10

  Following an upgrade to Windows 10 on a Pavilion dv6 notebook, functionity wireless is disabled because the Intel Centrino wireless N2230 is not supported for this OS.

  Is it possible to replace the WiFi card intel with a REALTEK RTL8188CE and enable wireless connectivity?

  I now have a card Realtek RLT 8188CE and installed the driver available from drivescape.com. Works on Windows 7 and Windows 10.

• Pavilion dv6-2170eo: UEFI does not work on the Pavilion dv6-2170eo

  I updated the BIOS on my Pavilion dv6-2170eo of the e.17 release (I think) for F.1CA, the last of them. I have installed Windows 8.1.

  As there was no partition HP_TOOLS, I could not use the BIOS Setup. I created a HP_TOOLS partition and installed the HP System Diagnostics UEFI, sp52093.exe, but I can't always run the tools of diagnosis or the configuration of the BIOS. When I press ESC, F2 or F10 when booting the computer locks.

  If there is no other solution, I would like to go back to an older version of BIOS, without EFI, because it worked well before. Where can I find such a version?

  Forget it. I misunderstood the problem.

• Pavilion dv6 - 2171 Wifi's stay, even with the Ethernet cable is plugged.

  Hello

  I just did a clean install of Windows 7 Ultimate 64 bit on my Pavilion DV6 - 2174ca, installed all the drivers of necesasry and worked on almost all of the bugs.

  But I had problems with my network drivers. I have all the drivers available of Net installed and activated, but when I plug in and ethernet in to a wired connection Wifi stays on. In order to show him a wired connection, I need to go to Device Manager and disable the driver Broadcom 43225.

  I installed the network drivers are:

  -Bluetooth Device (personal area network)

  -Bluetooth Device (RFCOMM Protocol TDI heading)

  -Broadcom 43225 802.11b/g/n

  -Realtek PCIe GBE Family Controller

  I do not want to go in Device Manager every time I plug an ethernet. Can you offer any suggestions? We hope to hear soon. Thank you!

  Hello

  No need select Manager of Devive to disable. 3 clicks and the wireless will be stop.

  (a) click # 1: the icon wireless (lower-right).

  b click on # 2: SSID

  (c) click n ° 3: disconnect

  Or try please answer to Diana on the following discussion:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-make-win-7-to-prefer-wired-over-wireless/97ae998b-5743-E011-9767-d8d385dcbb12

  Kind regards.

• HP Pavilion Dv6 win 7 will not connect to the internet (WiFi Atheros AR9258 adapter)

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Hello.

  I have a HP Pavilion Dv6-2110AX Windows 7 Home Premium and one a few days ago I had a problem with the internet/network connection.

  It was working normally and then, suddenly, just collapsed. I tried everything I know: System Restore, update the wireless driver (Atheros AR9258 wireless adapter - ftp://ftp.hp.com/pub/softpaq/sp48001-48500/sp48488.exe), reset the driver (I don't know if I did it right), but nothings helped to y for remedy.

  The only message I get I can't try something there: "Windows has not automatically determine the network proxy settings." I tried to do it manually, but it won't let me change any configuration in there, I don't know why.

  In the Device Manager, it indicates that the wi - fi adapter is not working properly and I can't access internet and network with my smartphone and 2 other computers at home, so I guess that the problem is not the router and I don't know what else to do.

  The only thing I have not tried to change IP address, because I don't have the Setup for this network and I don't know if this will help also.

  I appreciate all help. Thank you!!

  Spoiler (Highlight to read)

   

  Hi.I have a HP Pavilion Dv6-2110AX Windows 7 Home Premium and one a few days ago I had a problem with the internet/network connection. It was working normally and then, suddenly, just collapsed. I tried everything I know: System Restore, update the wireless driver (Atheros AR9258 wireless adapter - ftp://ftp.hp.com/pub/softpaq/sp48001-48500/sp48488.exe), reset the driver (I don't know if I did it right), but nothings helped to y for remedy. The only message I get I can't try something there: "Windows has not automatically determine the network proxy settings." I tried to do it manually, but it won't let me change any configuration in there, I don't know why. In the Device Manager, it indicates that the wi - fi adapter is not working properly and I can't access internet and network with my smartphone and 2 other computers at home, so I guess that the problem is not the router and I don't know what else to do. The only thing I have not tried was change IP address, because I don't have the Setup for this network and I don't know if this will help also. I appreciate all help. Thank you!!    

  MR. B

  Well well, after 1 month trying to get assistance from HP and after 2 weeks in this forum (thanks to everyone who saw the subject and tried to help ) I just gave up and did what I have done since I had the problem.

  My solution was to use the recovery discs to "Reinstall" everything and now the laptop is like when I bought it, but works.

  If you decide to do, REMEMBER to backup all your files before otherwise you goanna lose everything, because the recovery system returns your computer to the factory settings.

  The best thing is, it took less than an hour to do. If I'd known...

  Good luck people, c is the next time (hopefully not soon)... hehhehe!

• Pavilion dv6 7040tx: replacing the battery in my dv6

  I am looking for replacement of the battery for pc, as I am unable to find the necessary 6 cells, I want to know which is the code of the component 9 cells MO09 H2L56AA is compatible with my pc. And how much autonomy can I expect.

  I was able to find the 6 cell battery replacement of a number of suppliers looking for next web I did.

  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=DV6%207040tx%20replacement%20HP%20battery

  If you buy a battery 9 cells from a seller, just ensure that they guarantee the compatibility with your laptop and give a one year warranty.

  The battery life depends on how you use Notepad. It is not the same for everyone. Power options settings are the key to this. This is why the battery warranty is always a year. Usually, I managed to get three years or a little more fromet batteries for laptops.

• No Turbo Boost on HP not Pavilion DV6 7040tx

  HP Pavilion 7040 has a processor Intel 3610QM which is capable of TBT until 3,3 Ghz. It'smentioned on almost all websites purchases there TBT. But after the purchase, there was no TBT associated drivers installed on my system. When I tried to install a driver he ives an error "the system does not meet minimum requirements to install this software. The same mistake withU application Intel TBT monitor too. When I used an app (CPU - Z) to check if it synchronizing up to 3.3 Ghz, my processor is not above 2.3, even at 100% CPU usage.

  Everyone please help. No use talking with HP support team...

  See if this T-monitor works

  http://www.CPUID.com/softwares/TMonitor.html

• HP Pavilion DV6-6117dx - horizontal flickering lines appear after the display turns off automatically

  The DV6-6117dx model (as well as other HP Pavilion laptops) have experienced a problem where the screen will display a flickering, horizontal line to the top of the screen, after it has been automatically disabled (note: not in sleep or Standby Mode).

  There is a setting to "off the display of [X] minutes" in power options.  I have my DV6-6117dx value dim the screen after 10 minutes and turn it off after 15 minutes of inactivity.  Sometimes, but not always, when I move the mouse to turn the screen back on, a couple of flickering horizontal lines will appear at the top of the screen.  It is very annoying, and the only way to remove them and to have the screen back to normal is one.) put the computer to sleep and wake it or b.) restart the entire system.

  Everything by putting the laptop to sleep and wake-up is not a huge problem, I wouldn't do that, period.  I owned a laptop Toshiba for about 6 years and never had a problem with her like this (the reason why I bought a new laptop was because my old man was 6 years old and the technology was outdated a lot, a lot).

  HP says it's a software problem, but it did come with a way to fix it yet (at least not that I've found).  I ask all the 'Experts' out there if they have a final way to solve this common issue experienced by some models of HP laptops?  I said to uninstall and reinstall video drivers without success.  I said to install video drivers only to AMD, and then only to HP, and then only from Windows Update, but none of these solutions worked.  I said to update BIOS, but it does not solve the problem.  I told him to try to restore the system to the factory settings, but this did not help.  It is obviously a software problem, but nobody at HP seems to have a definitive solution, how to fix it.  Is my only hope to return to my laptop to be replaced by a different model entirely?

  I hope that someone out there has an answer, it's a common issue that I know a lot of owners of portable HP experienced.  Thank you!

  Hello
  I think it's the right time to get in touch with HP and use the guarantee. How to do?
  Click on the link below and choose your country:
  Contact HP worldwide

  You can also try the suggestions from the link below before you send it to the service:

  Common issues with the screens

• Pavilion DV6-2140ED: Pavilion DV6: 10 Windows does not start after the upgrade memory (4 GB-> 8 GB)

  After I upgraded the RAM in my HP DV6 from 4 GB to 8 GB (2 x 4 GB Kingston KTA-MB1333 / 4G), Windows no longer starts. I get a blue screen and it keeps restarting.

  I think that the memory specifications are similar to the Samsung M471B5673EH1-CH9 original memory: Ghz 1333, non - ecc, 1.5 volts, case latency 9 etc.etc.

  It's a laptop DV6-2140ED HP with a processor Intel i5 - 430 m and Intel mobile chipset HM55.

  The bios detects 8 GB and it also passes the check/test of memory. As far as I know that I have also installed the latest bios firmware: F.1D. Reinstall my Windows 10 64 bit does not work either: with 8 GB I also get blue screens, after I try to boot my Windows 10 bootable USB drive.

  I read other people having the same problem, but I have not read a solution yet. What can we do about it?

  Hello:

  Please see this discussion.  You buy a very specific memory for any HP laptop with Mobile Intel 5 series chipset.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/memory-upgrade-6550b/m-p/5340551/highlight/true#M207994

• HP Pavilion DV6 - 2057CL: Maintenance and Service Guide for the HP Pavilion DV6 - 2057CL

  Normally, HP helps a user/customer search for a maintenance and Service Manual for their computer, but I'm unable to locate a manual for my DV6 - 2057CL.  (???)  If anyone knows where I could find one of them, or maybe not even a link for me to be able to go to?

  I appreciate all help.

  Hello

  Normally CL machines are for the Club. You did by the machine of a club? Unfortunately, no maintenance and Service of Guide for this model/product:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&product=4041728

  You can try other books of the same generation dv6 (year 2009):

  http://www.HP.com/CTG/manual/c01744837.PDF

  http://www.HP.com/CTG/manual/c01859609.PDF

  Kind regards.

• After a clean install of Windows 7 pro on the Pavilion dv6-6147tx I have no access to the Universal USB po

  After a clean install of Win 7 pro on Pavillion DV6-6147tx I have more universal access to USB ports.  I can't find a driver to download HP downloads or disk 3 recovery disc. 3 USB ports o.k.

  I finally solved my problem of usb 2 with a NEC driver downloaded from HP believe it or not... He took a large sum oh hunting via other websites. My contact with the HP service is a waste of time.

  The pilot is SP47677. EXE from HP, it does wonders, but it does not appear on a search in the HP website.

  I solved my problem.

• HP pavilion Dv6 problem of fan - want to know the number of spare part

  Hello

  I bought a HP Pavilion dv6t QE in December 2011. Just after the warranty expired in December 2012 its fan stopped working. Whenever I go mobile I get error this laptop fan does not work properly. I'm ready to get the fan/radiator changed, but I'm not able to find the spare on the HP website. Please let me know the number of replacement HP Fan & Heatsink heat for model below:
  Series: 2CE14903X3
  Product: QJ912AV
  Model - dv6t - b 6, 00

  You are the very welcome.

  OK, the specifications indicate that since you have AMD and Intel switchable graphics, you must have an Intel processor in your machine. The tool shows 1 GB (1024 MB) of video memory for discreet video of AMD HD 6490 M

  Based on the specifications of your screenshot, it's the Fan/Heatsink combo that you need.

  Only for model computers with an Intel processor and a graphics subsystem with 1024 MB memory discrete HP Part # 665308-001

• I have a Pavilion dv6 laptop and I want to upgrade the graphics card

  I'm the product: HP Pavilion dv6t - b 6, 00 CTO Quad Edition Entertainment Notebook PC

  Product number: QJ912AV #ABA

  Operating system: Windows 7 Home Premium (64-bit)

  Graphics factory-installed: Radeon HD 6490 m + Intel(r) HD Graphics Family (but I spend the Intel 3000 drivers)

  My graphics were problems since I got my laptop and I didn't realize what a few months after when I did a check on why my graphics running on low FPS. I called customer service and they could not solved the problem, so I started to do the research and updating my drivers for each of them and switching them too. I have finally fixed them and instead to run Minecraft on 22 FPS, I was there at more than 60 FPS.

  Now, this graphics card is good and all, but there are not adapted to the new games (and I've had this laptop 1 year). What don't get me, is why HP installs some old graphics chips in a new laptop. in any case, I want to see what I can put in the new card. I really want to install and Nvidia 650 m, but I don't know because I don't have any information on my motherboard and it is manufactured by HP. Why I want to improve it is because that 1.) This chip sucks and can't play the games of 2005 and more than 2). He cannot run newer games like I'm a player PC of BF3. I get a strong brand of 28 FPS on BF3-ultimate low quality on this game, he reached sometimes 30 but not much. I want this thing to run as good as my game desktop computer that is custom built, so I really want to know what works with this laptop.

  Please help me to know what works so I'll be better satisfied with HP products.

  -Spencer

  Read this document. This has been implemented by one of the community experts (erico).

  The answer is usually going to be no upgrade that has been done on the graphics card as this is usually soldered to the motherboard and designed to work with specific chipsets. The fact that this example uses the switchable graphics actually still less likely. I'm sorry.

  PC hardware is changing at a rapid pace, so you get a day probably will be obsolete in a few months if not sooner. I personally ordered a laptop and there was already a new model of the series which has a better processor and graphics card to this topic. Alas, I was outside the return period and could not take advantage of the new model.

  This largely depends on the software used, but cell phones are not usually able to achieve the same performance as a desktop game PC. My laptop performs as well as my office during playback of half-life 2, but there is a big difference when I play Crysis. The experience will depend on how the program is written and how the game engine is optimized. It varies from game to game.

• Pavilion DV6-3000 series - is unable to restore the system to factory State

  Hello

  Could you please help me with Factory System Recovery.

  I think I accidentally erased one of the three local disks (about 2 GB) with HP tools.

  Then when I used the HP System Recovery tool, the system told me that he did not find the files necessary for HP Recovery tool and offered me uses the compact disc of recovery with this tool. But I do not have this disc.

  Please provide me with instructions and files to the recovery of the factory system.

  Model: dv6 - 3082sr with Windows 7 x 64

  Thank you

  Alexander

  Hi Alexander,.

  There are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  Also, if possible, back up the folder swsetup which lie at the root of the C drive.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Regarding the drivers etc, you must, if you were able to save the swsetup this will contain all the software installers and drivers for your laptop - if you were not able, drivers and software, you may need can be found here.

  Best regards

  DP - K

• Webcam HP Pavilion DV6 has stopped working, it worked before, the message says webcam not started.

  The pre installed webcam works perfectly, but somehow, it works now so I;  I have re-insatalled Cyberlink software, but the webcam is not listed in devoce Manager, I get a message saying that the webcam is not started or is not found.  CyberLink Youcam software opens well, but the camera seems not to turn on. Is there a switch for the webcam harware? As there is a work around and turn off the WiFi? Perhaps a system configuration that controls what devices at boot time startup. It's as if the unit is just off, not activated, the close the lens light now, it used to.

  Your help will be very appreciated.  How can I activate my WebCam HP pre-installed?

  TIA

  It comes to my HP Pavilion dv6and the problem of my WebCam suddenly stopping.  I have posted two previous requests for assistance, does NOT see much in the way of answers.

  If I had held my breath waiting for some help or answers to this place - I'd be dead now days.  I tried everything I could think of; reinstalled the software, drivers.  But the error message was always the same saying that "the webcam was NOT turned on."  Back, through some other posts, that I could see that others have also had the same problem and all the guys from HP that mentions his HP job; has said was to reistall the software, or choose the webcam in the CyberLink WebCam software. but this option is still grayed out.

  So I just bit the bullet, because I had to do in the past.  I took off the inside of the plastic frame for the screen at the top and sides.  I had to unscrew two screws at the bottom of the screen frame to the hinges, under self-adhesive pads oval plastic/rubber.  In the Center, you can see the small Assembly of camera and microphone, with white wires, it will.  At that time, I had to put on a second pair of reading glasses, because the parts are so small.  I finally found a tiny multi wired plug-and - taken right of camera lens Center.  I loosened and then pushed with a small bamboo skewer.  When I buttoned up things up; and restarted the CyberLink WebCam driver program came to light on near the lens and the camera showed a live video image which aimed directly at me.  This plastic frame is very fragile and the two small screws will immediately far jump on the floor that you haven't cleaned vacuuming lately.  Has disappeared!

  I must say that I have had absolutely NO help from anyone at HP, I is uncomfortable taking my laptop apart to fix a poorly designed plug/plug obvious for the WebCam.  I like really this computer basically, perfect Beats Audio work for my deafness, I get more and more clear than any other volume laptop that I have tried over the past 20 years.

  I added Ram 16GBs of memory, but I have not noticed that much improvement, maybe when I make more digital video, CAD/CAM and photographics.

  I hope HP can get the image into the connector on the WebCam release and let us know how to fix it with a technology tech or something.  I tried searching and was NOT able to find the answers for my laptop either, I had the chance-out to allow him to run again, I hope you can get yours working again too.

  See you soon,.

  R & R