Pavilion dv6 - 2171 Wifi's stay, even with the Ethernet cable is plugged.

Similar Questions

• MB Pro restarts randomly with the ethernet cable is plugged

  I recently bought a thunderbolt reduction - Ethernet [1] and it works very well. The problem is that when it is plugged in, my MacBook Pro (13', 2015, i5, 8 GB) gets very hot. This isn't a problem, but the next thing is really annoying.

  Whenever I'm not load, but the ethernet cable is connected, and MacBook goes into sleep mode, the system turns off instead. Thus, for example, when I don't have the power cable and if go for 5 minutes, the system automatically sets the mode 'sleep'. When I come back, it is turned off, and when I hit the power button, a black screen with the Apple logo and a text in several languages, saying that the system restarted because of a problem. After that, MacBook starts normally.

  The same phenomenon occurs:

  • When the power cable is not connected and I close the screen
  • When the power cable is not connected and I SLEEP manually the MacBook
  • When the screen is closed and I plug the power or the ethernet cable

  I use OS X 10.11.

  [1]: shot of lightning-Ethernet reduction ter http://www.apple.com/shop/product/MD463LL/A/thunderbolt-to-gigabit-ethernet-adap

  The SMC reset may help:

  https://support.Apple.com/en-us/HT201295

  Ciao.

• What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

  Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.

• Pavilion dv7 Notebook - how will I know if I'm connected with the Ethernet cable or wireless?

  The notification area icon displays only a wireless connection, although the ethernet cable is connected to the laptop.  HP Connection Manager shows that both wired and wireless connections are active.  All of my previous laptop (not HP) had different icons for wireless to a wired connection in the notification area.  HP has a different icon for a wired connection?  If so, why it doesn't show in the notification area?

  obxperson99 wrote:

  Enrico, thank you.  I have installed Win7 Pro.

  The Network and Sharing Center says I'm connected wireless.

  Program of HP's "Connection Manager" shows that both the wired (ethernet) and wireless networks are connected.

  If I am always connected wirelessly with the ethernet cable plugged into my machine, how to move from the wired connection?

  Open the network and sharing Center. Look at the picture of what I have posted. Do you see where it says log in or out? Select it, and then disconnect from the wireless network. If you are also connected to the wired connecttion, then the connection should be almost transparent.

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• Satellite P300-173 never off when the ethernet cable is plugged or WIFI

  Hello

  I can't stop my P300 correctly.

  Whenever the ethernet cable is plugged or wifi is connected, stop work until the screen goes black but the power remains on: fan, always active LEDs. The only way to stop then is to press the power button.

  As the network is always connected, it's really annoying.

  Can you please help?

  Thank you!

  ER

  Hello

  Very strange problem
  First have you checked if you use the latest version of the BIOS?
  Please check this!

  On the European driver Toshiba page you will always find the latest BIOS and divers.

  Secondly, I would recommend disabling more upward on LAN option in the BIOS and in properties (device-> LAN properties-> Advanced tab management) LAN card

  Check if this may help solve this problem

• Pavilion dv6: Intel Centrino Wireless N2230 incompatible with the operating system Windows 10

  Following an upgrade to Windows 10 on a Pavilion dv6 notebook, functionity wireless is disabled because the Intel Centrino wireless N2230 is not supported for this OS.

  Is it possible to replace the WiFi card intel with a REALTEK RTL8188CE and enable wireless connectivity?

  I now have a card Realtek RLT 8188CE and installed the driver available from drivescape.com. Works on Windows 7 and Windows 10.

• NB100 - unable to connect with the ethernet cable

  My netbook works very well with the wireless connection (even if I get only 4 MB when I have 10 MB connection). I visited a House of friends the other day and she does not have a wireless router.

  I plugged the cable broadand on my machine. I disabled the wireless connection and activated the network connection in network connections. I turned off then the feature wireless on the keyboard with the keys Fn & F1.

  It shows that there is a link in my taskbar, but when I try to open the internet it does not connect.

  I thought it was his connection because she had problems so today I went to another friends house and got exactly the same response.

  I decided to try the same thing at home and I disconnected the ethernet cable from my wireless router and performed the steps listed above.

  Still no joy - am I missing something?

  Tips:

  Use a static IP address, and not using DHCP.
  Disable your firewall. It can block the network connection.
  Disable network cards won't do not. If you use wired LAN, turn off wireless and Bluetooth in the Device Manager.
  Check if their ISP requires a power of Attorney, if they don't, specify the Proxy and Port in your browser settings.

• Re: Satellite C660-1F1 won't turn on even with the AC adapter is plugged

  Hello

  I need help.
  I have a portable c660-1F1. It will come with the charger plugged.
  Trying to hook up without the battery and it will not turn on. I don't know what the problem is.

  I took the battery and took out the charger and you press the button power for 30 seconds and nothing.

  Did a CMOS reset and nothing.
  Took one on the memory and replaced it, but nothing.

  I don't know what the problem is. I even took the internal battery and see if that makes a difference.
  Nothing happened. Still won't turn.
  I think it may be the internal fuse if there is?
  Or if could be the port if the laptop? The charger works fine.

  The battery life is very good and I think I'm out of options and I'm afraid that it might be the motherboard and if yes, then I guess I can replace the card mother, but don't know if it works.

  Can someone help me?

  > The battery is fine and I think I'm out of options and I'm afraid that it might be the motherboard and if yes, then I guess I can replace the card mother, but don't know if it works.

  It looks like the motherboard.
  It would be the worst case, because the new motherboard is really expensive: about 300

  Do you think that its worth a try? I have not... in that case I would ask a technician to check the hardware.

  What would you do if you buy a mobo and finally you will discover that it is not question of mobo?

• Apple TV (4th gen) faster with 5 GHz WiFi with the ethernet cable

  When my Apple TV is connected to my network via 5 GHz WiFi it gives me a faster speed (about 120 Mbps) connections it makes when I plugged it on my network (about 45 Mbps) ethernet cable.  Why is this?  I thought that the ethernet would give me the fastest connection possible.

  The ethernet port on all ATVS (including the 4th generation) is only 100 Mbit/s. The actual speed depends on the quality of your network as the routers, switches and cables components and of course it depends on the length of your ethernet cable and if it is damaged in any way (folded or crushed). And finally, that depends on how fast you have actually measured, on your local network speed, or speed on your WAN.

• I just bought an Airport Extreme and try to put in place.  I have Fios cable with a router.  I can not get anything except a blinking orange light.  After reading the instructions, it seems that the problem with the ethernet cable but I

  Must not exceed the flashing orange light.  have tried three ethernet cables to the Fios router.  All thoughts

  What extreme version do you have?

  Test the cables connecting the airport to your Mac with them and see if the ethernet works on Mac. Green connectivity light should go... If it fails, then the AE died.

  Please do a factory reset, then try again.

  Sometimes Mac airport utility works well... If you have the preference or iphone ipad, download and use iOS version airport utility and try it for configuration... It is much less awkward.

• Assistant of migration with the ethernet cable?

  Hello! I have a new iMac and I want to use the Migration Wizard to transfer my old files from my old Macbook Pro to my new iMac. Love at first sight is not my old Macbook Pro only Firewire 800, USB 2.0 and an Ethernet port. So I thought I will use the Ethernet on Mac port with a CAT6 ethernet cable to connect directly to a faster transfer, but I don't know how it works, because the drive is not appear when you use Migration Wizard. I followed the instructions from Apple: https://support.apple.com/en-us/HT204350

  But when looking for sources, it does not find my Macbook Pro drive so it can start the Migration process. Do you need to set up something else to make it work? Or is it beter to this with Firewire 800, which is my other option. Hope someone can help me ;-) Thank you Cloe

  Ethernet requires both computers to be started normally

  FireWire should be started using the target to the source computer and the computer started normally host

  OS X Lion mountain: transfer files between two computers using target disk mode

• My Windows XP laptop does not connect to my 2WIRE router wireless, but do my other laptops. It will only connect with the ethernet cable. What is the problem?

  What I'm doing.

  1. my laptop is a Toshiba XP

  What serial number and model of Toshiba?

  What type of encryption 2wire router uses for now? Type of WEP or WPA? If the latter do you know if your XP laptop wireless card supports WPA (some older cards only). If you find that this is the problem, you can go to the WEP encryption or buy a WPA compatible device to use instead of the current device on the XP laptop.

  If you don't know how to find this information...

  The range and the model are probably on a sticker on the bottom of the laptop.

  I think that there is a sticker on the side of 2wire routers (leastways are those provided by BT) gives you the encryption key and this might also state what is the type of encryption. Or, if not, open a web browser such as internet explore/firefox etc and go to http://gateway.2wire.net, somewhere on the router admin pages, you will find information on wireless security/encryption.

  Regarding the card laptop wireless, I can help with this if you give me the range and the model as requested above. I can, also, be able to determine from the description of the device in Device Manager. Click Start, click Run, type devmgmt.msc and press ENTER. Network adapters (click on +) and transcribe the wireless adapter that there are listed in a response to this post.

  Tricky

• printer is not found when connected to the router with the ethernet cable

  My c6280 used to print wireless (not a wireless printer) because I had hooked to the router.  Now, it won't work - I'm on Mac OSX Lion.  I tried to delete the printer and reinstall.

  Hello

  Please make sure to remove the software completely, because there is no plans for Lion.

  While the printer is connected to your network,

  Go into System Preferences > print & scan and click on the sign more.

  Select your printer and the driver will download automatically the Apple software update.

  For more information, you can follow the document below:

  http://support.HP.com/us-en/document/c02911238

  If the update fails to install Apple servers, download and install the package of the latest version of the HP to Spple printer software:

  http://support.Apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers2.7.2.dmg

  After completing the installation, add your printer as explained previously.

• HP pavilion dv6 1241et: Wifi problem

  My computer hp laptop pavilion dv6 1241 and. Work of the laptop good but a little bit older. Computer laptop wifi card second time first time change error card error wifi with guarante the second time no guarantee that I use the ethernet cable. I upgrade ram and wifi card. Please give me advice

  for the wifi card I can't find anything on the replacement, then you want to stay with the one you've got, or buy an external

  For RAM, the requirements for the upgrade are:

  201 pine, at 800 MHz, PC2-6400, DDR2 SDRAM Small Outline Dual In-Line Memory Module (SODIMM)

  or something like that