HP pavilion dv6103nr, windows xp media center edition, recovery
I get this error message "Windows is not start because the following file is missing or corrupt...". Please reinstall a copy of the above file' the file name changed after I tried a system restore and is currently
My 10 year daughter, was the last who has used the laptop and said that she was just using ms word. Here's what I've tried so far. You press f10 to access the PhoenixBIOS Setup utility. A go from there ran a "first hard drive Self Test" this reported success, but still does not start correctly You press f11 go to the "restoration of the PC" (I think that I created years recovery disks when I bought the laptop, but have no idea where they are) went in the advanced-> Windows System Restore Options. That said it needs to restart and brings back me to the black screen You press f11 to go to the recovery of the PC again. This time only used the default value and click Next. Apparently this default option does not remove the data files on the pc. This lasted about an hour, rebooted and took back me to the black screen but with another missing file. Don't you remember what was the last file. Any ideas on what to try next? Maybe I should find a way to connect to the hard drive without the laptop? Thank you very much. I promised myself now not to delete images from my camera memory card/photo until I supported the up... twice Hello: I think you have to remove the HARD drive and put it in an external USB box to get the data out of it. If you try a system recovery, it would erase all files and restore the system as the day it left the factory. Something like that would be what you need for the portable player SATA that your PC comes with. Then just plug it into another PC and copy your files off the power. http://www.Newegg.com/product/product.aspx?item=N82E16817270028 I doubt you'll get up to start the laptop. Once you get the data out, and if you do not find the recovery discs, you did, you can get factory HP recovery of this 3rd third-party disks. http://www.computersurgeons.com/ProductDetails.aspx?ID=3022 I wish I had a dollar for how many times I said to my parents "I don't..." » Paul Tags: Notebooks HP Pavilion a1310n - Windows XP Media Center Edition 2005 I have a HP Pavillion, which had Windows Xp Yes. It can be done very easily if the Recovery Partition is still there as a D: in 'My Computer' or 'computer '. If this is not available, then use Recovery Disk set when the PC was new or order a set of Surgeons of the COMPUTER. Enter the model number in the search box. Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005 Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005 Important notes before starting: 1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed. 2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system. 3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it). 4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only 5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive. 6 - notice of disclaimer Steps to follow: 1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this 2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver". 3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site 6 - install the "Display Driver" of the Cd of drivers (no need to reboot). 7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site 8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date." 9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly. 10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -. Enjoy your PC powerful Qosmio Toshiba laptop. Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here. Ciao Satellite A100: Need drivers for Windows XP Media Center Edition Hi there, hoping someone can help me, just bought Windows XP Media Center Edition, had home installed, installed a new and I'm missing some drivers (Ethernet controller, mass storage controller, network controller, PCI device and video controller VGA) I have a satellite A100 PSAA9E and I was wondering if there is no driver for this edition of windows yet or if there is no alternative that is pro XP drivers should work? Thank you Hello On this page of Toshiba, you will find drivers for different units. Win MCE drivers are not available for Satellite A100, only Win XP. Will there be side effects to install windows xp service pack 3 update on my windows xp media center edition version 2002 service pack 2? Done correctly, installation of SP3 will have as a side effect, a very beneficial: Extended Support for WinXP (x 86) SP2 ends July 13, 2010. After this date, computers that run Windows XP SP2 will NOT be offered additional security updates critical (x 86), automatic updates do not work, and Windows Update Web site is not accessible until SP3 is installed. How TO get a computer running WinXP SP2 fully patched Zune on Windows XP Media Center Edition 2002 software Is there anyway to get the Zune software to work on Windows XP Media Center Edition 2002? Hi Balram, If you are looking for Windows XP Zune application, you need Windows XP SP3. You can download the software from this link. http://www.Microsoft.com/en-US/Download/details.aspx?ID=27163 If Windows XP SP3 is not installed, you can download it from this link Xbox 360 and Windows XP Media Center Edition 2005 Hello Hoping to get help with this, because I searched everywhere and had not found an answer. All the work around the items, reference Windows 7 and 8 not XP my Dell Dimension C521 shipped with Windows XP Media Center Edition 2005 pre installed. I've upgraded to SP3 of XP. A friend of mine gave me his old Xbox 360 (bought a new unit). When I try to connect to the XBox 360 I get an error message in media library "uninstall the update for media center 2005 and then re-install the update of the site Web of Windows update. Then, re-run Setup for Xbox 360' I checked in my under settinds program control panel, but don't see any element for Media Center 2005, even with show checked all of the updates. I don't see Media player listed and 2 updates for it. I have disabled the Windows Firewall did not help. The Xbox 360 test shows that I can connect to the internet, Xbox Live (no NAT problems) and PC running Media Center. It fails on the media center connection test. I don't want to reinstall all of the Dell backup image software supplied with the camera, I'll have to back up and start over. Any help is welcome! Thank you Matt Hello original title: error with ehshell.exe I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me? This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option. You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them. Mouse and keyboard no longer works in Windows XP Media Center edition I moved my Gigabyte Media Center and start the keyboard and mouse are are suddenly stopped working. Works very well to access the BIOS key and F8 for safe mode - has also no feature mouse keybpard or. So with any form of Windows I have no input control. It is not a problem with the keyboard because it works in start mode. Tried other mouse USB and keyboards all to nothing does not. There are no PS2 port on the machine. I found a few examples of this anomaly on the web, but no real answers. It looks like windows for mouse and keyboard drivers are corrupt? But how can I get reinstall - machine is defunct Evesham, I don't have a recovery disk or a serial number. Any help would be accepted with gratitude! Hi Keith, Thank you for your response and keep us updated. I suggest you run the fix from the link next and if it helps. USB devices stop working in Windows XP Media Center Edition http://support.Microsoft.com/kb/890546 If the problem persists, feel free to let us know. We will be happy to help you. Problem, reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005
Assistance or management, you can provide me to solve this problem would be highly appreciated. A generic Package: 10/28/10. 21:32:48 A generic Package: 10/28/10. 21:32:48 Function (ExecCmdInThread) Message of Post for the Package id: 1045. A generic Package: 10/28/10. 21:33:02 Function (ExecCmdInThread) Message of Post for the Package id: 1046. A generic Package: 10/28/10. 21:33:02 Process creation: WindowsXP-KB895961 - x 86 .exe/quiet /norestart Function (ExecCmdInThread) Message of Post for the Package id: 1047. A generic Package: 10/28/10. 21:33:02 Function (ExecCmdInThread) Message of Post for the Package id: 1043. A generic Package: 10/28/10. 21:33:02 Function (ExecCmdInThread) Message of Post for the Package id: 1043. A generic Package: 10/28/10. 21:33:02 Function (ExecCmdInThread) Message of Post for the Package id: 1043. A generic Package: 10/28/10. 21:33:02 Function (ExecCmdInThread) Message of Post for the Package id: 1043. A generic Package: 10/28/10. 21:33:02 Function (ExecCmdInThread) Message of Post for the Package id: 1048. "Creative process: c:\0f7019deb34a2ccd3d5c2a4d9e4f3e57\bin\wmfdist95.exe/q: a/r: n /C:"wmsetsdk.exe/WMFDIST/q/r: n /DisallowSystemRestore. Function (ExecCmdInThread) Message of Post for the Package id: 1044. A generic Package: 05/12/11. 21:26:14 A generic Package: 05/12/11. 21:26:53 Function (ExecCmdInThread) Message of Post for the Package id: 1045.
A generic Package: 06/03/12. 21:27:50 A generic Package: 06/03/12. 21:28:23 Function (ExecCmdInThread) Message of Post for the Package id: 1045.
A generic Package: 12/02/13. 09:44:39 A generic Package: 12/02/13. 09:45:16 Function (ExecCmdInThread) Message of Post for the Package id: 1045. A generic Package: 12/02/13. 10:11:58 A generic Package: 12/02/13. 10:12:30 Function (ExecCmdInThread) Message of Post for the Package id: 1045. Hi kwanray, Welcome to the Microsoft community. According to the description of the problem, you can not reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005. I'll help you with this problem. I suggest you follow the steps in the article. Update Rollup 2 for Windows XP Media Center Edition 2005 Reference: Support for Windows XP Media Center Edition 2005 Let us know if you need help with Windows related issues. We will be happy to help you. picked up my computer and does not, Windows xp media center edition service pack 2 update I got my computer and now it will not refresh, I'm under version2002 service pack 2 for windows xp media center edition, I did another time and of the load down a service pack and don't remember what you Hi DeirdreGrimes, Windows Update no longer works if you haven't installed XP SP3. To check your level of service pack system, click on start, run and type "Winver" in the Run dialog box and click on 'OK'. If your system already has XP SP3 installed, you can try reset the windows update components by referring to the link below. There are prerequisites for the installation of Windows XP SP3. You can find them by reading the link below. Steps to take before installing XP SP3 http://support.Microsoft.com/kb/950717 How to reset windows update components http://support.Microsoft.com/kb/971058 If your system does not already have SP3 installed, you can: Download and install XP SP3 fron the link below. (Ignore the warnings on THIS subject the professionals and network facilities). Windows XP SP3. http://www.Microsoft.com/en-US/Download/details.aspx?ID=24 Windows XP SP2. http://www.Microsoft.com/en-US/Download/details.aspx?ID=28 If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure. How to troubleshoot a SP3 Installation fails. http://support.Microsoft.com/kb/950718 Let us know if this is useful to provide feedback. Good luck. Original title: Okay, I bet no one has ever heard of it... At the Media Center 2005 Rollup 2 loads, my Lifecam Microsoft HD Webcam turns on and I guess that starts recording. WHAT? What is happening with this? I have Windows XP Media Center Edition 2005, SP3. Hello -Did you change on your computer due to which the question has begun? I recommend you to start your computer in a clean boot State and turn off Microsoft Lifecam Webcam to run at startup HD. Note: Don't forget to restart your computer in normal mode by following the steps described in the article. Windows XP Media Center Edition computer will not start. When it starts, I get a BootMagic screen that allows me to choose the normal Windows operating system or partition DOS6. The next screen is text offering choices such as: Safe Mode, last known good Windows, normal windows, etc. None of the choices do something else that restart the boot process. Well, almost a month since the gateway computer's dead, and I do not have anything on it. Spent a lot more time for the new computer with Windows 7 to run my most used programs: WordPerfect and Lotus 1-2-3. According to me, that you gave me a choice when I reinstalled Windows 7 to use either 64 or 32-bit. If I had a choice, it is 64. At this point, I wish I had chosen 32, due to all the incompatibilities resulting in 64. I doubt that there are real benefits for me. One thing they point out is his ability to deal with > 4 GB of RAM. This computer has 2. What I installed was XP HP discs received with a laptop period of 2002. Probably violates some policy Windows, but my rationalization was that bridge should have on giving me the opportunity to re - install the Windows XP Media Center edition. I prefer to get this OS works because it has a smooth operation built in encryption system. The XP system is running on a 40 GB IDE drive that I had added to the computer. There are too many error messages trying to install an operating system on theoriginal 250 GB SATA drive. Usually the installation of software did not see the SATA drive. He is currently disconnected. It work pretty well in the new computer from HP in the 2nd SATA slot for to retrieve me my data. I have a client who has a Dell Dimension E510 with Microsoft Windows Media Center Edition 2005. Failure of their hard drive, so I installed a new hard drive and reloaded Windows XP Media Center Edition 2005 collection of Technet. I'm now start using the Microsoft key update tool to update the product key in the product key of the client on the system chassis. Unfortunately the Microsoft key update tool is not supported in this version of Windows XP. The client doesn't have their media. Any help would be appreciated. How to activate Windows XP See the section titled: "how to activate Windows XP by phone. Blank page to activate Windows in the wizard of Windows Product Activation How to contact a Microsoft Product Activation Center: Microsoft Activation centers worldwide telephone numbers: The phone number is not working: Once Windows activated / Genuine Advantage Notifications: J W Stuart: Http://www.pagestart.com Of Windows Media Player 11 in Windows XP Media Center Edition (SP3) I AT & T U-Verse, and I am trying to download video clips at home in my online account so that I can display on the TV. When I select the option on the TV using the remote control that would search my computer for the files, I get a message that I need to select sharing on Windows Media Player 11 before U-verse can download files. I have Windows Media Player 10 on my math so I went online to download Windows Media Player 11. During the download I get the message that I have Windows XP Media Center Edition 2005 version and I have Windows XP Media Center Edition version 2002 Service Pack 3. What should I do to download Windows Media Player 11 with success? The link above for the forum of social responses seems to be an incorrect link. I can find no record of a response. You will need to start your own, new topic in this forum and ask for help with your problem, whatever it is. When I type www etc. firefox season sites Web-how to disable this option? When I chose a website and start typing www etc, firefox will suggest various sites Web-how can I disable this feature? Guarantee rules to recreate the image Hello I recently bought a Lenovo ideapad Z580 (in India). It comes with Windows 7 Home Basic Edition. I want to know if the hardware warranty will void if I remove the preinstalled OS (I'll keep the intact although OEM partition) and install another Photosmart C7180: Photosmart Software Suite I have a Photosmart C7180 all-in-one printer. I just got a new laptop and am trying to install the printer driver. The Software Suite, has it that the base driver is not working? I don't know which one to install. Apache error log is 146gigs because of the online game I think, how it remove? I was online game. I keep losing free space on the disk. My apache error log is more than 146 GB. How can I delete? I tried. I read about resetting my journal from the mistakes of 'prevent' to 'emerge', but I couldn't save this parameter or the other Since recently update my computer the appearance of my widgets for office incl., of Web sites, document files, email same icons have changed everything. For example, internet sites fill the entire screen, the fonts in the document files are all diffe
Similar Questions
Ctr Media edition 2005 as its original windows software but some time after purchase I reformatted the hard drive and installed Vista Business. I want to reinstall the xp of plant origin, but I do not have a CD. I have the original product key. Is this possible?
Last updated October 3, 2006
In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).
I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.
"If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.
To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"
When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.
A Q896256
DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
B Q910437
DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
C Q889673
DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
D - Q896243 (very Important, this will make SD and MMC cards for work)
DIFFICULTY "ADD Support high-speed SD card"
Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.
(Restart your PC after Installation)
Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.
Note: To avoid annoying Messages to drivers during Installation to do the following: -.
Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'
Your Internet may need one of the following drivers (depending on your Modem)
A if you your Internet through LAN then install the 'network' of the driver Cd driver.
B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.
Atheros Client Utility "no need".
Bluetooth Monitor "do not install, install only the"Bluetooth Stack".
Andy.
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU
Jasmin said, you can try to use the Windows XP drivers as the Win MCE is a WinXP with additional features.
Check it out
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows.
Looking for an existing installation of the generic package
Looking for an existing installation of the generic package
Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
Process returned 0 x 00000000
Looking for an existing installation of the generic package
Process creation: WindowsXP-KB891593 - x 86 .exe/quiet /norestart
Process returned 0 x 00000000
Looking for an existing installation of the generic package
Process returned 0 x 00000000
Looking for an existing installation of the generic package
Process creation: WindowsXP-KB899337-v2 - x 86 .exe/quiet /norestart
Process returned 0 x 00000000
Looking for an existing installation of the generic package
Process creation: WindowsXP-KB899510 - x 86 .exe/quiet /norestart
Process returned 0 x 00000000
Looking for an existing installation of the generic package
Process creation: WindowsXP-KB888795 - x 86 .exe/quiet /norestart
Process returned 0 x 00000000
Looking for an existing installation of the generic package
Process creation: WindowsXP-KB902841 - x 86 .exe/quiet /norestart
Process returned 0 x 00000000
Looking for an existing installation of the generic package
Creation process: KB900325.exe/quiet /norestart
0x00000bc2 returned by process
Process returned 0 x 00000000
Looking for an existing installation of the generic package
Looking for an existing installation of the generic package
Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
Process returned 0 x 00000643
Looking for an existing installation of the generic package
Looking for an existing installation of the generic package
Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
Process returned 0 x 00000643
Looking for an existing installation of the generic package
Looking for an existing installation of the generic package
Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
Process returned 0 x 00000643
Looking for an existing installation of the generic package
Looking for an existing installation of the generic package
Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
Process returned 0 x 00000643
I have backups of the C: drive in real Image files and ntbackup. I would like to make a bootable cd or dvd with the files needed to be able to copy the data on another dvd or on the local network to another computer. This computer was made by the gateway. No real installation CD were provided, just a "operating system Disk' which is of no use. The disk has been partitioned as C: D: K: etc. I added a 40 GB IDE drive, which is where half the data is I want back. I can 'see' readers when I boot from an old CD disk to Image, but may not see the LAN or write in the CD burner. Basically, should what files I put on a cd to boot?
I tried to use the provided gateway recovery cd again, but not long after starting it fails with a 'memory overflow, please insert another disk' message. Gateway support has not been cooperative, so I can try again. I think that they have it for me.
http://support.Microsoft.com/kb/307890/en-us
Also, make sure that you do not confuse the product key numbers and letters
(number 8 for the letter B, etc.)
http://support.Microsoft.com/kb/314935
http://support.Microsoft.com/default.aspx/KB/950929/en=us
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx
http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
(This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)Maybe you are looking for