HP Pavilion dv7-3190em problems with volume band and "base system device" in Device Manager

Similar Questions

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

• HP Pavilion dv7 6053er: problem with AMD graphics card.

  Hello. My name is Andriy. I use the HP Pavilion dv7 6053er of 2011 with win 7. I have updated my OS to win 10 in August 2015 and everything was good, but in September, I found a problem that I can't solve.

  As you know this laptop has two cards which ATI RADEON 6770 m video and its does not work. For example, in the Device Manager there are two cards:

  1 AMD Radeon HD 6700 M series

  2 Intel HD Graphics 3000

  In AMD Catalyst Control Center, I chose in the maximum capacity of all the options, but after I start, for example, Total War: Rome 2 the game see only Intel card. It is the same with windows I can't change the brightness using hotkeys (FN + F2 or F3). Keyboard shortcuts work because I can switch the WiFi, increase/decrease the volume and others.

  That's why I even reinstall AMD Catalyst Control Center, but it does not help.

  If someone knows how to fix this please help me.

  I have a solution:

  It was necesery to delet all software AMD and once mor reinstal AMD Catalyst Control Center after I did this all starts to work normally.

• HP Pavilion dv7 6c43cl: problem with HP Pavilion dv7 admin password request

  HP Pavilion dv7 with windows 10 with a log in request to enter the administrator password or power on password, disable the 69394915 code. Help please thanks

  @perezal12

  Enter 76092331

  Kind regards

  DP - K

• Pavilion dv7-6c95dx: problems with symtec press

  My Synaptics Touchpad back factory default whenever I turn on my computer. I can't find any update synaptics.com or windows help. Any ideas? My laptop is only 4-5 years. No error message. Problem happens whenever the machine stops. No software change or recent driver. Use wireless at home, for internet access. Thank you

  Hello

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• Pavilion H8-1205eo: Problem with 980 Ti and UEFI

  Hello! A few years ago I upgraded from the Radeon 7570 standard to use a 670 gtx graphics card in my H8-1205eo and everything went well. Recently I bought gtx 980 Ti to run the latest games at high heat. When I started the pc after installing the card, that it would not go beyond the blue HP screen and pressing ESC to enter the BIOS would show only a black screen with my characteristics listed. After reading a little online, I came to the conclusion that I need to change legacy to UEFI. I looked around a bit in the configuration menu, but wasn't able to find a way to change this in the UEFI. Should I buy a new motherboard, or I simply do not found the setting?

  Peter, welcome to the forum.

  You can't find UEFI because the computer is equipped with a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  There is no way to upgrade to UEFI.  The last series of video card that did not use UEFI was 640 gt.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Software with the Pavilion DV7-3190em

  Hello!

  Due to some problems, I had to format the entire computer and reinstall the operating system and updates. But time looking for downloads for my laptop (once again: Pavilion Dv7 - 3190em) I have not found all the software that I promised to buy. For example: MediaSmart Music, video, photos, SmartProtect, Cyberlink DVD and so on. So is the support site incomplete or these programs are not availible to everyone for downloading? As I said before, the computer is completely formatted, so I do not have the HP Recovery disk.

  Hoping to hear from you soon.

  Hello

  I do not know what HP MediaSmart software, you must so I write all latest versions 32/64 bit Win7:

  SmartMenu here (version 3.1.1.6)

  DVD here (version 3.1.3719)

  LineTv here (version 3.1.2206)

  Webcam here (version 3.0.2018)

  Music/video/photo here (version 3.1.3615)

  Internet TV here (version 3.0.1916)

  Cyberlink DVD - this software, you can not download from any site of HP. He finds only in the swsetup folder that is normally located on the C partition. You can get it by using the recovery disk in this situation who you are now. If you do not, then please get in touch with HP to get it. How all the information here (just choose your country).

  HP ProtectSmart Hard Drive Protection here (version for 32/64-bit Win7 4.0.4.1)

  If you are looking for other drivers or software do know us on this subject.

• Pavilion 14-v202tx: problem with the driver

  Hello

  I got a Win7 64 bit and I have a problem with a driver: network controller pci device and BCM43142AO

  My laptop HP Pavilion 14-v202tx

  Please help me

  Hello

  Broadcom Wifi

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66445.exe

  Broadcom Bluetooth software

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66402.exe

  PCI device

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Kind regards.

• Hello, I had a problem with my band. It does not really suppose he numbered scenes everything in order and he has so far in until I missed an and changed for the good order. But now when I go back to where I left and I have create a new scene

  Hello, I had a problem with my band. It does not really suppose he numbered scenes everything in order and he has so far in until I missed an and changed for the good order. But now when I go back to where I left and I have create a new scene number come up as * it and I need to change personally. is their any way I can change it to order normally?

  Hello

  You can manage this through the "Manage scene numbers" option in the menu 'Production '.

  There is a setting in this dialog box to assign scene numbers automatically to the new scenes.

• Pavilion dv7-1451nr: have Pavilion dv7 with instances of windows 8.1 there three missing for Base system device driver

  I have three instances of "Base system device" with a yello exclamation points, which is an indication that the drivers were not installed.

  I followed the advice of DK and copied the info below.

  PCI\VEN_197B & DEV_2384 & SUBSYS_30FC103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_30FC103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  @Obyrotz

  Try this one.

  http://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45180.exe

  REO

• problem with the base system device

  Hello! I have HP pavilion dv7-2250em, and I have a problem with the base system device. What should I do?

  Hello

  Maybe that's a problem with the card reader driver.  Try to download and install the driver from the link below.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45046.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. Mozilla Heve problem with images?

  Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. I have Sobipro for both the company and the logos and images without work!
  When I try to open the url is this:http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg

  whith mozilla is the following: /images/sobipro/entries\288\587_img.jpg when ichange it------with this / work.

  any idea?

  Thank you

  Hello, the URLS that contain-in their path are not valid. Firefox is less tolerant to errors in this respect than other browsers.
  Correct the path to http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg in the source code of this site or if you don't control the contact of the site their webadmin to do...

• Satellite Pro C650D - problems with the audio and game controllers

  Hello

  I recently had problems with my microphone and speakers/headphones and game controllers.
  Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Stakeholders sometimes still work when I connect headset.
  Some of the sounds are still coming through the speakers while some coming through the headphones.

  I have a usb game controller which also did not work everything properly.
  If I assign buttons in the program that they do not work in the game.

  All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

  Any body have similar problems or know what to do better?

  See you soon
  Laurin

  Hello

  Can you please send some details on the laptop model and the system you are using?

  With regard to the issue of sound/mic:
  > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Are you talking about internal microphone or external? This only happens using Skype?
  In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

  > Yet sometimes the speakers work when I connect headset.
  I recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295

  The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
  She wrote:
  + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
  + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

  + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

  Regarding the game controller:
  > I have a usb game controller which also did not work everything properly.
  > If I attribute buttons in the program, they do not work in the game.
  I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

• How can I return to 6.3 4.0 I have never had a problem with 3.6 and now 4.0 crashes all the time tell me how to go back

  How can I return to 4.0 3.6 I've never had a problem with 3.6 and now 4.0 crashes all the time tell me how to go back

  Downgrade to Firefox 3.6 first of all uninstall Firefox 4, but do not select the option 'remove my Firefox personal data '. If you select this option, it will delete your bookmarks, passwords and other user data.

  Then you can install the latest version of Firefox 3.6 available to http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your favorite courses, passwords etc.

  I recommend, to avoid possible problems with decommissioning, accessing your profile folder and delete the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Delete these files will force Firefox to rebuild the list of installed extensions, check their compatibility and cancel the toolbar customizations.

  For more information on how to find your profile folder, see https://support.mozilla.com/kb/Profiles

• Problems with wifi, bluetooth and gps in my iphone after updating iOS 6

  After that the last iOS 9.3 update my iphone 6 has problems with wifi, bluetooth and gps. Now, my wifi connection is slower and falls easily on a short distance. My bluetooth does the same. But the biggest problem is the GPS on my phone. I tried Island:

  -By doing a reset network

  -Do a reset total and restore my phone

  -To restart my phone twice.

  -Audit and third-party applications unnistalling

  Nothing works. I was in the apple store where they checked my phone and they say everything is ok with the phone. I'm not crazy, and I know when something does not work correctly. Also, I think it's iOS 9.3 update a reaponsible for my phone issues.

  Please fix bugs fast.

  Having the same exact problems since the upgrade. In addition, battery drains very quickly now, and sometimes the phone becomes very hot. It took to the Genius Bar and they told me everything was normal in the diagnostic tests. Restored, restarting, etc., and always the same problems. GPS locates me, but then don't follow my movement at all and told to go outside as the gps is not detected even if I am outside. Bluetooth connection to the car and watch grave intermittently. Signal WiFi is greatly reduced and falls easily.