Windows 7 - the DV 6000 Driver quick launch buttons

Similar Questions

• Display problem on the dv7 series laptop quick launch buttons

  Hello

  I have a new pavilion dv7-6b55dx laptop and I put windows 7 Professional (64 bit). Since that time (because before there home edition of the best buy store) everytime when I use a function key I don't see no display on the screen, for example, if you want to mute the sound, not sure if it worked or if you want to manage the brightness of the screen, you don't see anything on the screen (icon (, image, etc.).

  I downloaded the quick launch software and bottom of quick launch, but nothing has worked.

  How can I solve this problem?

  Thanks for your help

  Hello

  Download and install the HP OSD utility on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52956.exe

  Once the installation is complete, you pouvez must restart the laptop.

  Kind regards

  DP - K

• Windows 7 drivers for HP Quick Launch buttons

  Windows 7 drivers are available for the portable DV9700 HP Quick Launch buttons?  If Yes, where?  If this is not the case, they are planned?

  99Prez wrote:
  Windows 7 drivers are available for the portable DV9700 HP Quick Launch buttons?  If Yes, where?  If this is not the case, they are planned?

  The same QLB software runs on each series of HP laptops.  (Latest Version: 6.50.7.1)

• HP - Fail quick launch buttons

  Laptop HP Pavilion dv7-1000 series

  Microsoft Windows Vista (64-bit)

  HP Quick Launch Buttons don't work correctly... the sound (Mute) button is stuck on... It still works but stays on. More embarrassing, then nothing. Any ideas? I tried to reinstall the driver without change.

  Codec IDT high definition

• Quick Launch buttons work well after the upgrade to windows 7

  Hi everyone, I have computer computer laptop compaq presario v3000 (v3518tu) series. A few days ago that I upgraded my computer to windows 7 32 bits, but the quick launch buttons do not work very well. in fact, the function is OK (mute, volume up and down), however, color doesn't change (blue to red, blue or red) when I touch the button mute. Can someone help me solve this problem? Thank you

  He is not on the Quick Lauch buttons, your problem is related to his driver.

  Install Vista driver audio on your support page, it will fix the problem of light.

• HP Quick Launch buttons is not compatible with Windows 7

  Windows 7 Upgrade Advisor has reported that the driver for the HP Quick Launch Buttons 6.40F1 version is not compatible with Windosws 7. Does this mean that I won't be able to use the quick launch buttons. My laptop is a Pavillion dv 2410 us.

  I solved the problem by uninstalling the QLB from the Control Panel, then the upgrade with Windows 7 went through without any problems.

  The QLB work well with W7

• Windows 7 quick launch buttons - Reg

  Hello

  I use HP Pavilion laptop dv5-1102TU.

  I have recently upgraded to Windows 7 Ultimate from Windows Vista Home Basic by results of Windows 7 upgrade advisor.

  After the installation of Windows 7 quick launch buttons work for me, but light does not change its status (red white) instead its just in white always.

  I installed the driver provided in the link below

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=in&DLC=en&sw_lang=&product=3814...

  If I need to take some other driver?  Also, in the drivers section, I see 2 unknown devices (drivers not installed). When I checked its properties, so I found driver for this device "Intel(r) ICH9M LPC Interface Controller - 2919" is not available. ". So where can I find this driver?

  Kindly help me out in the present.

  Waiting for solution!

  Thanks in advance

  Kind regards

  Swami

  Hello

  I installed ' ENE CIR Receiver ' of link HP driver for my laptop and it fixed both my questions below, I mentioned in my previous posts.

  Fast light number of launch button - after installing the driver referred to above, its works for me

  Unknown device with yellow check mark for "Intel(r) ICH9M LPC Interface Controller - 2919" - he disappeared once I installed the driver above. "" I found this, after a lot of searching on Google.

  Kind regards

  Swami

• Quick Launch button remains constant and every time the computer goes into mode 'sleep' and wake up to the top, it does not close properly.

  Original title: MediaDirect problems

  I have a Dell Studio 1535 under Vista Home premium 32-bit. My computer has Media Direct installed, and lately the Quick Launch button stays on permanently. Whenever I put my computer in mode 'sleep' and then wake him up, I am presented with the problem of my computer being off does not correctly... How can I solve this problem?

  Hello

  1. What are you referring to whn that tell you immediately the Quick Launch button remains on constantly?

  2. are you referring to the Dell docking station?

  You can try to update the graphics card and check if it helps to solve the problem.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also check out the Dell support link to download the drivers:

  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&cs=555&l=en&s=biz&ServiceTag=&SystemID=STUDIO1535&OS=WLH&OSL=en&CATID=&impid=

  Hope this information is useful.

• Quick Launch buttons doesn't work on 8710w after fresh Windows 7 install

  Hi all

  I recently did a clean installation of Windows 7 Ultimate 64 bit on my 8710w.

  After you have installed the latest drivers available: HP Quick Launch Buttons v.6.50.12.1 (sp46731.exe) when I press a button, the corresponding light turns on for less than one second, turn and nothing happens. The wireless button does not work even on light.

  I reinstalled the driver and still nothing.

  Quickluanch buttons worked perfect with the previous Vista Ultimate 64 bit OS.

  Someone knows something about this issue?

  I already have google without success, there are references to other models of laptops and drivers which supposedly do not match the 8710w.

  Thanks in advance for any help.

  Kind regards

  Cristhian Anaya

  HP Compaq 8710w Mobile Workstation

  Windows 7 Ultimate 64 bit

  So useful to someone:

  I tried one last thing which was to 'hide' TPM Embedded Security Device Availavility go BIOS, also disabled the «Vista Live App Launch»

  After that the changes made to the above BIOS I have re-installed Windows 7.

  Now, the quick launch buttons work without any problem.

  I have not really now what was wrong, but the problem has been resolved.

  Kind regards.

• his quick launch button does not work when I installed windows 8 in my computer hp laptop pavilion dv3z

  1. number and product name
  laptop HP pavilion dv3z

  2 operating system installed (if applicable)
  Windows 8

  3. All changes to your system until the problem occurred
  installed windows 8

  When I installed windows 8 in my pc laptop hp pavilion dv3z, the quick launch of the volume button is always red and the sound is mute... the driver for quick launch buttons and pilot for the sound is also up-to-date... can you help me please?

  When installing the audio driver, it installed following the instructions or mode of compatibility as shown here?

  Based on the software and drivers page for this device, the device was not tested and certified for Windows 8.  This means that some features may not be the same as the device was not designed for Windows 8.  See this site for more information and to find out if it has been tested for Windows 8.

  If the audio driver has not been installed in compatibility mode, I recommend using the 64-bit Windows 7 found here driver and using the related steps above to install in compatibility mode.

  Let me know what happens.

• HP Quick Launch buttons for Windows 7 to work a bit now, they have stopped working

  So I installed windows 7 x 64 on my HP Pavilion DV9700t. I had no problem using the Upgrade Advisor. My current rating is 4.9
  Everything is much more vivid and works fine, except the HP Quick Launch buttons.
  Initially, they worked so I could control the volume buttons, mute and media. So I don't remember exactly what I did and I installed an update or a specific package of the software HP Quick Launch buttons and they stopped working.

  I do not use the system restore and I mixed through several HP software packages including: SP40139, SP44777, SP39425. These seem to install fine and starts the process of quick launch control. However, the buttons do not always work. I even started the HP Quick launch in Windows Vista compatibility mode buttons.

  So I was wondering how I can return to pilot initial KB that happened when I installed Windows 7. Which seemed to have done the trick, but I don't know what it was.

  HP is too lazy to support my laptop brand, even if it is more than enough to run Windows 7.

  Thank you!

  -octi

  Hi Covrigus Deus,

  I will suggest you to uninstall and reinstall the HP Quick Launch button software and reinstall it back. You can check the latest HP Web site package.
  For help with respect to uninstall and reinstall, you can visit the HP website for the instructions.
  If, however, the Quick Launch button still doesn't work after you have performed the steps in the abvoe, I will propose you to complete the restore of the system.

  To restore the operating system to an earlier point in time, follow these steps:

  1. System restore click Start, type in the search box and then click on the system restore listed programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  1. In the System Restore dialog box, click on choose a different restore point and then click Next.
  2. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  3. Click Finish.

     The computer restarts and system files and settings are back to the State they were in when the restore point was created.

     For more information, see:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• Microsoft Sidewinder Gaming Mouse (not X 3, X 5 or X 8) change the function of the Quick Launch button?

  Dear Microsoft, I have a mouse Microsoft's Sidewinder, this one to be exact: http://www.microsoft.com/hardware/en-us/d/sidewinder-mouse

  I was wondering if there is absolutely anyway to change the function of the quick launch on the mouse button, it opens the folder of the game, but it is rather useless since the Games folder is in itself pointless. Tell me there must be something? The Intellipoint software allows me to change the functions of button on it EXCEPT only one darn button.

  If it's any help this quick launch button is ALSO present on all other iterations of the Sidewinder gaming mouse.

  Any information or advice welcome.

  Hello

  I suggest you to reschedule the thread for the possible answers and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/question-about-SideWinder-x8-DPI-buttons/aef0ed98-cc3b-40Ca-8438-50c1b6392a66

• Where are the quick launch buttons?

  Hello

  I have a ProBook s 4710 and I had app called "Quick Launch Buttons" pre-installed on my computer. The thing is - where these buttons are on my laptop? There is a button next to the Start button, which launches the application quick launch buttons, but how can I configure this key for something else and where is the rest of the buttons?

  See you soon.

  Hello

  Depending on each application, some applications (games, mainly) allow you to reprogram the function keys. Alternatively, you can assign the macro to your function keys:

  http://support.Microsoft.com/kb/237179

  and you can change your keyboard layout using the following instructions:

  http://support.Microsoft.com/kb/258824

  Kind regards.

• Tx1000 and quick launch buttons

  Hello
  
  I have a Tx1000 (REF RX695AV) on which I did a clean install of Windows 7 ultimate x 64.
  
  The touchscreen works can I open/close and drag the programs with the stylus.  So do the buttons (Play, following precedent and Stop) multimedia.
   
  What does work are the four quick launch buttons (screen rotation, display settings, start the QuickPlay, DVD).  I tried to install Vista 64 (sp38171.exe) for the latter and while I now have a driver listed for the buttons located under the computer management, on the triggers of associated program starting a 'known compatibility issues"of Windows 7.  (If I run it there seems to be problems with Windows Explorer.)
   
  The button that I really want to work is the screen turn.  (The display settings are nice to have).  Can I do to get this key work?

  Finally, as an aside during the work of the touch screen, multi touch does not work.  Do I have reason to assume that it is a hardware problem?

  Thank you Tim

  I have the same problem on a tx1340ea.

  After that I extracted sp38171.exe ran setup.exe in Windows XP (SP2) compatibility mode, and it works very well.

• Quick Launch button uninstall (or fix)

  HP Pavilion dv4 - 1365dx

  
  

  s/n: [text removed for privacy]

  p/n: NM037UA #ABA

  OS: Windows 7 Home Premium x 64-put update from Vista Home Prem x 64 via HP upgrade

  Details: Ok... So, I'm about to pull my hair out on this one.  I did everything HP has told me to do (re - install HP QLB soft/drivers, update BIOS, update of IDT Audio) and even tried to remedies, I read on the internet (unscrew the battery with the power cable, etc.).  My button mute is stuck red.  Even system restore will be the only use it for a day at the most. Basically, great laptop but I cannot wait until this network button is stuck red.   Which is why I'm asking... anyone know how I can completely bypass QLB and great glory?  Also, I can use my shots audio but as I said, if the button Mute control speakers... what happens if this network never button stays red?

  Summary: I need help bypassing QLB completely or at least how I can solve this problem.  Thank you!

  Before your upgrade to W7, the quick launch buttons were functioning normally?

  What I read he sound like you've already tried this, but reinstall your sound driver IDT. Just humor me.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&LC=en&DLC=en&cc=us&lang=en&OS=2100&product=3919634

  This one is for Vista and if that one doesn't work, try this one.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75537-1&LC=en&DLC=en&cc=us&product=3919634&OS=4063&lang=en

  If she says that one of them is already say 'Yes to replace all' reinstall after a restart of course.

  In addition, your net work button works, but you're worried that it will begin to do so, correct?

  The only problem is now so just with the mute button?

  If none of the works above, let's try a more radical solution.