HP Pavilion DV7 BIOS configuration utility - 2010ev:

Similar Questions

• ProDesk 600 G1 BIOS configuration of the TPM secure through the BIOS Configuration utility

  We have a range of devices, computers HP desktop and laptops in our environment.  Devices are all running Windows 7 64 bit and should have Bitlocker enabled, but we found that some were not encrypted.  So I am trying to set up a remote BIOS and Bitlocker config activate software that we can get out via SCCM and then embed in a task sequence image for new machines.

  I use the Bios HP Configuration utility to check a BIOS password is set and then activate the TPM chip.  I took a BIOS config output of each of our models and created a settings file that has all of the TPM associated parameters of all models.

  At the moment I run Setup BIOS utility manually for testing.  On all models I tried that works very well, except for the 600 ProDesk G1 SFF.

  When I run the utility on the ProDesk 600 G1 MFS, it says that I have managed to update the settings, and when I check the BIOS, the TPM secure has been unhidden and the TPM Management was given to the operating system (two settings I change), but the TPM itself remains hidden.

  It's the release of the BIOS configuration utility (it uses the 2.60.13.1 version, which uses plaintext passwords.  I also tried with the 3.0.13.1 later version that uses password files - same result)

  C:\ > BiosConfigUtility64.exe /cspwd: "password" set: "TPM_Config.REPSET"
  
  < BIOSCONFIG Version = "2.60.13.1" Computername = 'HP600G1' Date = "24/07/2014" Time = "13:01:37 ' UTC '1' = >"
  
  < SETTING changeStatus = "pass" name = "Embedded Security Device" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [hidden device]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [device]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SETTING changeStatus = "pass" name = "Enable security on the next boot" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SETTING changeStatus = "pass" name = "The BONES of on-board safety management" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SUCCESS msg = "Successfully set BIOS config." / >
  
  < information msg = 'BCU return the value' real '0' = translated = '0' / >
  
  < / BIOSCONFIG >
  
  C:\ >

  And after a reboot (where it should activate the TPM), BIOS shows as disabled built-in safety device (see attachment for the image).

  I have tried everything I can think of to get this to activate, including:

  • Different versions of the BIOS configuration utility
  
  
  • Remove the password from the BIOS and the application in the same order as the parameters
  
  
  • Different passwords
  
  
  • Reboot and allowing the machine to start completely to Windows before checking if the setting took effect

  I also tried to add the utility and the commands for an SCCM package and it works directly and as part of a sequence of tasks to see if that makes a difference, but nothing I've done has activated the TPM module.

  I know that the TPM module works, as you can turn it on manually and then Bitlocker can be applied to the machine, but with thousands of devices in our environment, I need to get this job without the need for manual intervention.

  Has anyone else had this problem and found a solution?  Or has someone at - he managed to activate the TPM on the SFF of 600 ProDesk G1 using the BIOS Setup utility?  Any ideas / suggestions would be very appreciated!

  P.S. This thread was moved from the company PC - Compaq, Elite, Pro for HP PC Client management. -Hp moderator of the Forum

  This problem has now been resolved by HP.
  
  They provided a replacement motherboard for the test machine I was using that solved this problem. I don't know what kind of motherboard failure could prevent the activation via the script TMP chip but not prevent activation through the BIOS menu, but as a replacement solved the problem, then it must be a hardware failure.

• BIOS Configuration utility

  Hello
  I was wondering if Toshiba laptops have a Bios Configuration utility similar to what HP and Dells have. HP has a utility called 'Biosconfigurationutility.exe' which allows the switches to export the configuration file, maniplulate it and import back into the Bios. Dell has a named CCTK aswell.

  The main objective of the present is so that I can import a file of responses in SCCM to set up the laptop to turn on the TPM so that when the generation is here, I can run a windows task to activate Bitlocker with the TPM secure.

  Please help me.

  Thank you

  As far as I know laptop Toshiba don t have something like that. Only the tool where you can change some settings in BIOS is Toshiba HWsetup utility you can find in Toshiba Assist optionally optimize.

• The HP pavilion dv7 bios password reset help?

  Hey, I have a problem with my bios password for my hp pavilion dv7 key is 55173340. Thanks to all those who can help you

  Hello

  Try to enter: 40851986

  Kind regards

  DP - K

• HP Pavilion dv7 bios power on password

  I have a HP Pavilion dv7 that requires a password on boot up - I have no idea what it is cause of my son entered something and does not know that he came. Please help I need to get into the laptop. The code I have is 76320194...

  Thanks for any help you can provide Thank YOU >

  Try to Ed.

  69088110

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• HP pavilion dv7 bios password reset please

  My oldest son took my laptop to school and use it to surf the "questionable" sites on schools open a wi - fi connection. To stop this I put a BIOS password on the system. The problem stopped, but I have the password forgotten presence.

  The system is a HP Pavilion Dv7. Unlock it Passoword (key: 68439207).

  Help, please!

  Thanks - Pinger

  Hello:

  Restart and enter the code:

  77591829

• HP pavilion dv7: Bios pwd

  Hi I forgot my bios pwd and my key is 72452766

  @julien4847

  Enter 63530368

  Kind regards

  DP - K

• HP pavilion dv7: bios password

  When I want the bios, it says I need a password.
  When I fooled a number there: 61805809.
  
  THX,
  Hypnos

  Hello

  Enter: 74763229

  Kind regards

  DP - K

• Pavilion dv7 1140ec: 1140ec Pavilion dv7 BIOS password

  Hello, should what password I use to unlock the BIOS on this laptop? My key is 53655814

  Hello:

  Please read the first post on the link below for what to do with the system off (halt) code given by the PC.

  http://h30434.www3.HP.com/T5/notebook-operating-Sy...

• Pavilion dv7: Re: Hp pavilion dv7 bios password reset help?

  Need BIOS password help

  59066686

  @stattikilla

  Enter 46944208

  Kind regards

  DP - K

• HA pavilion dv7: bios password

  I need the bios pwd my code is 65575196

  Hello:

  Please read the first post on the link below for what to do with the system off (halt) code given by the PC.

  http://h30434.www3.HP.com/T5/notebook-operating-Sy rods Softw...

• HP Pavilion DV7 BIOS - need to change AHCI IDE, but don't have no option to do so. The F.1A BIOS version

  I get a blue screen STOP after the replacement of SSD drives. I had taken a picture SpotMau the week before so, fortunately, (I think) I will not lose a lot of work. Now, after the restoration of the image on a new SSD, I get a blue screen with:

  STOP: 0X0000007B 0XFFFFF880009A97E8

  I have looked for help on this STOP and tells me that I need to change the setting from AHCI to IDE, let the operating system pick up the new device driver and then update after reboot. I know where to do on Dell and Lenovo machines, but this HP doesn't seem to have this option.

  Can I update a BIOS later (the latest is sp55068 - F.1B) or make another change to allow me to make this change?

  If it helps, Win7 x 64 with 4 GB of RAM on a 128 GB SSD. The old, defective, SSD was also 128 GB.

  I tried to put in a 'normal' 320 GB 'plateau' HARD drive but get the same error so assume (with care) that it is relative to the creation of the AHCI/IDE.

  Any ideas?

  In case someone is interested, problem solved.

  It had nothing to do with the BIOS or defective material. SpotMau (for some reason any) created a partition of 100 MB to the front of the drive during the process of the image. This is in addition to the "SYSTEM" partition that creates Windows 7. Using the partition tool that comes with SpotMau I deleted this partition, fixed the boot record (also with a SpotMau tool) and hey-presto, everything works again.

  Thank you for taking the time to read these ramblings. I hope this helps someone else.

  EDIT: Spelling and a final sentence.

• Pavilion dv7: bios unlock code

  bios need unlock code

  error has been 68097028

  @PaulGD

  Enter 77995008

  Kind regards

  DP - K

• HP Pavilion DV7: Hp pavilion dv7 bios password reset please

  Can you please give me a code to unlock the BIOS?

  Didn't have to be there for a long time, I forgot what I put it with ;-)

  Code is: 51446025

  Thank you!

  Hello

  Use the code to reset below

  44524001

  Or generate it from the link below

  http://BIOS-PW.org/

• Pavilion dv7-1103ef: HP Pavilion dv7 bios password reset help

  Hello

  I forgot my BIOS password and my code is 60472553

  Can you help me please?

  Thanks in advance for the help!

  Hello

  Enter: 75550595

  Kind regards

  DP - K