HP Pavilion Elite e9120f upgrade of capabilities?

Similar Questions

• HP Pavilion Elite e9120f homemade my hotter than the Sun (first tl; dr material)

  Well Yes, I'm baaaaack with another question regarding the Pavilion Elite e9120f.

  This problem doesn't become apparent only a few weeks ago, when the outside temperature decided to jump the 20 degrees or more.

  My CPU runs very hot and I'm very worried.

  A nice cool day like today its IDLE at 56 degrees Celsius. On a hot day its 58-61 Celsius.

  It sucks for me because I do very high definition youtube videos and fitness puts them all 4 cores of default of the e9120f CPU, the AMD Phenom II X 4 910 dependents from 98 to 100 percent (in turn calls the temp to never bet greater than 65 degrees, during which the cpu fan goes supersayan and makes the room vibrates with the sound of a Jet engine that is not much, only keep the temperature constant, it don't cool does not desperately).

  First: get a temporary monitoring program that works with this terribly designed motherboard is hard; SpeedFan, cpu - z, nothing works except Core Temp v0.99.6 that works very well. (It is worth mentioning that the bios of the motherboard comes with does not any overclocking of any kind, whatsoever, and if you mention same fan control it is falling apart.)

  I found a number of things:

  The fan on the top of the radiator may be upside

  There is very little air flow in the case

  There is no empty fan on the motherboard connector (photo, page layout sketch)

  So I need to ask some questions to the base time down to a reasonable temperature.

  So:

  The CPU on the top of the radiator fan. It is supposed to blow air down on the radiator or suck air through it? (Blow into the case or suck case, blowing on the radiator).

  IF, for example, the seal of filth gray (sorry for the noob, I don't know what this kind of things question) which normally resides between the radiator and the processor itself was broken somehow, that would be the problem? (I had to remove so that I could lift several tons of dust in the trash, he was released and seems to work fine for a while until now).

  If the gray dirt is the cause, how do I fix/replace it?

  If it's not and it turns out that I need a new cpu fan/radiator, I could get suggestions for under $ 80?

  And would work this configuration:

  fan case normal cover, connected to a plug. Corsair H-50 attached to the CPU, using Connector CPU fan for the pump (pump uses a 3-pin cpu fan connector, which is what uses the mother Violet3 in the e9120f), change the case so the fan and radiator are attached to the area of practice 120 mm perforated on the case, and this is where is Gets a bit tricky : using a spare molex 4pin to PSU and converter who is actually making a 3Pin fan and this connector 3 connector case pin case fan, use another converter (I've SEEN ONE but I can't find the link more) convert the fan 3 pins to a contraption of connector 4pin case fan. I also ask if there is an easier way to put it in place but I can't find anything that converts a molex 4-pin PSU to this type of plug:

  

  I appreciate for any help. This pocket of plasma burning in my cpu MUST END NOW! LOL tl; Dr

  It should not be too much a problem with a 3 pin to 4 pin Just make you line insertion slots.

  Optionally, you could add as a case fan or change the power supply. HP power supplies have very small fans and the area of total air flow (grid holes) is also low.

  Thermal paste is gray grime. You need more than a slim gain of dab of thermal paste rice spread.  Insofar the processor coolers to go, you will need to do some measure the width and the height.  The Corsair and Thermaltake make a lot of CPU coolers.

• Pavilion Elite M9300T: upgrade geforce 9500gs

  I have a Pavilion Elite M9300T KZ854AV #ABA with CPU Q9300, 3 G of RAM and 750 GB 7200 RPM / MIN SATA 3 GB/S HD.  I want to improve the memory, the operating system & video card.  The current map graphic is a NVIDIA Geforce 9500 GS - 512 MB.  I don't do a lot of game but with Cyberlink Power Director 12 video editting.  Extremely slow rendering video during editing.  Is there a map 'step-up', I can go to without having to upgrade the POWER PC block?  Looking for some recommendations on the new cards.  Currently have Vista Edition Home Premium - 32-bit but want to upgrade to W7 Pro - 64-bit as part of the upgrade process.

  You are welcome.  Thank you for the additional information.

  The reason why I give you a recommendation of the video card is for the reasons I said.  Most of them won't be better than what you have, and it is difficult to find a retail map that will work with your power supply 350W. However, I talked to Technical Support EVGA (1-888-880-3842).  He said that the cards that are compatible with your motherboard 2008 are limited.  He recommends is an EVGA GT 640.  I recommend you call their Tech Support to ensure it will work with your motherboard and BIOS.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP pavilion elite m9500y: upgrade suggestions please

  Hello

  I have a HP pavilion elite m9500y.

  Here is the link for the specification.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c01616194

  I want to update my pc because it became so slow these days.

  Please give me your suggestions for the upgrade, such as the change of memory cards or a graphics card, etc.

  Thank you

  Hello

  It is a machine for 8 years. Please note, new technology can come out every weeks or even days. You must update the motherboard, CPU, RAM, power supply, disk HARD and a few others and you won't get not the speed of the new machine to.

  I would give the option a miss and buy a new machine.

  Kind regards.

• Ram HP Pavilion Elite m9040n upgrade options

  Hi, my question has to do with what is the best ram to fill my ram slots with. I run windows 7 Ultimate 64 bit and I don't know that I can fit 8 GB total. I'm in recording music with a large number of devices. I have things like a console 003, a 11Rack, a Boss GT - 10, as well as a Piano Yamaha G-1. All are via USB except the 003 (Firewire connection).

  I have a report of sandra to take account of my diet and updates of graphics card.

  Sandra Report!

  SiSoftware Sandra

  Computer

  Model: HP-Pavilion, GN553AA - ABA m9040n

  Working Group: task force

  Host name: Marshall-PC

  User: Marshall

  Processor

  Model: Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz

  Speed: 2.4 GHz

  Cores per processor: 4 unit (s)

  Threads by heart: 1 unit (s)

  Type: Quad-Core

  Built-in data cache: 4 x 32 k, the size of online synchronous, Write-Thru, 8 channels, 64 bytes

  Edge L2 Cache: 2 x 4 MB, ECC, synchronous, ATC, 16 channels, 64 byte line size, 2 son sharing

  Computer

  Motherboard: Asus Berkeley

  BIOS: FRIEND 5.13 24/10/2007

  PCI, ISA use: X - Bus PCIe IMB USB FireWire/1394 i2c/SMBus

  Support multiprocessor (MP): No.

  Advanced multiprocessor PEAK (APIC): Yes

  Total memory: 3GB DDR2 DDR3 DIMM

  Chipset

  Model: HP P35/G33/G31 processor to i/o controller

  The front side Bus speed: 4 x 267 MHz (1 GHz)

  Total memory: 3GB DDR2 DDR3 DIMM

  Channels: 2

  Memory Bus speed: 2 x 334 MHz (668 MHz)

  Bars of memory

  Memory module: Micron 8HTF6464AY - 667 7 512 MB DIMM DDR2 PC2 - 5300U DDR2 - 666 (5-5-5-15 3-20-5-3)

  Memory module: (Hyundai) to Hynix HYMP512U64CP8-Y5 1 GB DIMM DDR2 PC2-5300U DDR2-666 (5-5-5-15 3-20-5-3)

  Memory module: Micron 8HTF6464AY - 667 7 512 MB DIMM DDR2 PC2 - 5300U DDR2 - 666 (5-5-5-15 3-20-5-3)

  Memory module: (Hyundai) to Hynix HYMP512U64CP8-Y5 1 GB DIMM DDR2 PC2-5300U DDR2-666 (5-5-5-15 3-20-5-3)

  Video system

  Video card: NVIDIA GeForce 9800 GTX + (128 SM4.0 1.7 GHz, 512 MB of DDR3 2.2 GHz 256 bit PCIe 16 x 2.00)

  Video card: NVIDIA GeForce 9800 GTX + (128 SM4.0 1.7 GHz, 512 MB of DDR3 2.2 GHz 256 bit PCIe 16 x 2.00)

  Graphics processor

  OpenCL processor: NVIDIA GeForce 9800 GTX + (128SP 16 c 1.84 GHz, 512 MB of DDR3 2.2 GHz 256-bit)

  Compute Shader Processor: NVIDIA GeForce 9800 GTX + (128SP 1.7 GHz, 512 MB of DDR3 2.2 GHz 256-bit)

  Storage devices

  Hitachi HDT725032VLA380 (320 GB, SATA300, 3.5 ", 7200 RPM, 7 MB of Cache memory): 298 GB (C (D)

  Generic-Compact Flash (USB): N/a (H

  Generic-SM/xD-Picture (USB): N/a (I

  Generic-SD/MMC (USB): N/a (J

  Generic-MS/MS-Pro (USB): N/a (K

  TSSTcorp CDDVDW TS-H653N (SATA150, DVD +-RW, CD - RW, 2MB Cache): n/a (E

  Logical storage devices

  SysReserved: 100 MB (NTFS)

  Hard drive (C : 289 GB (NTFS) @ Hitachi HDT725032VLA380 (320 GB, SATA300, 3.5 ", 7200 RPM, 7 MB Cache))

  FACTORY (D : 9 GB (NTFS) @ Hitachi HDT725032VLA380 (320 GB, SATA300, 3.5 ", 7200 RPM, 7 MB Cache))

  Removable disk (H : n/a @ generic-Compact Flash (USB))

  Removable drive (I : n/a @ generic-SM/xD-Picture (USB))

  Removable drive (J : n/a @ generic-SD/MMC (USB))

  Removable disk (K : n/a @ generic-MS/MS-Pro (USB))

  Optical drive (E : n/a @ TSSTcorp CDDVDW TS-H653N (SATA150, DVD +-RW, CD - RW, 2MB Cache))

  Devices

  LPC Hub Controller 1: HP (ICH9) LPC Interface Controller

  LPC Legacy controller 1: Asus F8000

  Audio device: HP (ICH9) HD Audio Controller

  Audio codec: Realtek Semi 888 high definition Audio

  Serial Port (s): 1

  Disk controller: HP (ICH9) 4 port Serial ATA Storage Controller 1

  Disk controller: HP (ICH9) 2 port Serial ATA Storage Controller 2

  USB controller 1: HP (ICH9) USB Universal Host Controller

  USB controller 2: HP (ICH9) USB Universal Host Controller

  USB controller 3: HP (ICH9) USB2 Enhanced Host Controller

  USB controller 4: HP (ICH9) USB Universal Host Controller

  USB controller 5: HP (ICH9) USB Universal Host Controller

  USB controller 6: HP (ICH9) USB Universal Host Controller

  USB controller 7: HP (ICH9) USB Universal Host Controller

  USB controller 8: HP (ICH9) USB2 Enhanced Host Controller

  Controller FireWire/1394 1: HP FW322/323 IEEE1394 OHCI FireWire controller

  SMBus/i2c controller 1: Intel ICH SMBus

  Printers and faxes

  Printer: Microsoft XPS Document Writer (600 x 600, color)

  Fax: Microsoft Shared Fax Driver (200 x 200)

  Printer: Adobe PDF Converter (4000 x 4000, color)

  Devices

  Network services

  Network card: Intel(r) 82566DC-2 Gigabit Network Connection (Ethernet 100 Mbit/s)

  1 wireless adapter: USB wireless 802.11 b/g adapter

  Power management

  (AC) line status: online

  Operating system

  Windows system: Microsoft Windows 7 Ultimate 6.01.7600

  Compliance platform: x 64

  Windows experience index

  Current system: 5.7

  Increasing tips

  Tip of 2546: memory large-capacity Modules must be ECC/parity.

  Tip 2: Double click on advanced or press ENTER, while a tip is selected for more information on the tip.

  Hynix and Micron produce good RAM modules. I suggest that you go for 4X2GB DDR2-800 memory sticks. Here are the specifications of memory supported by the motherboard:

  Dual channel memory architecture
  Four connectors DIMM DDR2 240-pin
  Supported DIMM types:
  DDR2-800
  DDR2-667
  Memory non - ECC, unbuffered
  Supports DIMM DDR2 2 GB modules
  Supports 8 GB on 64-bit PCs
  Supports 4 GB * on 32-bit PCs
  NOTE: * actual available memory may be less

• HP Pavilion Elite M9047C: Upgrade graphics card

  I put upgraded my computer to windows 7 64-bit home premium.  I have just a nvidia geforce gt 610 that does not play well with the computer as it is.   disk failures and crashing.

  I change to power 500 w of power.  put a 250g SSD and a secondary hard drive of 1 terabyte.  I have contributed to a maximum of the ram with 8g.

  Can anyone recommend a card that works better than what I have now?

  Thank you

  PB

  You would be better served by the following: 1) 600W PSU Corsair and 660) 2 of the card EVGA GTX.

  Your GS 8400 original is in the margins of the GT 610.  Not really an upgrade.  Although the GTX 660 declares a min of 450W, your drives additional all add up to the load.  Collectively 'we' usually recommend air power.  This allows the new PSU to run time 1) better and 2) more effectively.

  Now on this OS, good choice.  You will have until 2020, before there is no support.   You will have until the 29/07/2016to upgrade to WIN10, if you want, for free.  I would upgrade the new SSD for WIN 7.  Then clone it on the original HD.  This way you will have WIN 7 on the original hard drive, the system security.

• Bluetooth to a Pavilion elite (e9270f) upgrade to Win 8.1

  I had been using a USB-based Bluetooth device on this machine as a 7 BONE system. I just upgraded to 8.1 Win and the Bluetooth does not work with my Android phone more. HP will come out a driver for Win 8.1?  Thank you

  Hello

  This site may have a driver Windows 8.

• A usb 3.0 card can be upgraded to the HP Pavilion Elite e9150t CTO desktop computer?

  I have a HP Pavilion Elite e9150t CTO Office, which has been upgraded to Win7 64-bit.  Could I move to the newer and faster usb 3.0 by purchasing and installing a card with usb ports?

  Hello

  Based on the following specifications, it has a few free PCIe connectors:

  http://support.HP.com/us-en/document/c01792852

  You can add a card PCIe USB 3.0 on your computer such as:

  http://www.eBay.com.au/BHP/USB-3-0-PCI-e-card

  Kind regards.

• Pavilion Elite HPE-170f Deskto: Memory Upgrade

  I have the HP Pavilion Elite HPE-170f desktop.

  Motherboard: Pegatron IPMTB-TK (Truckee)

  Processor: Intel Core i7 CPU 920 @ 2.67 GHz, 2668 Mhz, 4 Lossnay, 8 logical processors

  Storage media: 6 x DDR3

  Memory type: Types DIMM PC3-8500 (DDR3-1066)

  I currently have 8 GB of memory.

  What is the maximum I can install?

  Operating system: win 10 Pro 64-bit

  Thank you

  John

  @jmwright1058

  Memory upgrade information

  • Architecture memory triple channel

  • Six DIMM DDR3 240-pin connectors

  • Supports types DIMM PC3-8500 (DDR3-1066)

  • Memory non - ECC, unbuffered

  • Supports DIMM DDR3 4 GB modules

  • Supports up to 24 GB on 64 bit computers

  • Supports up to 4 GB * on 32-bit computers

• HP Pavilion Elite HPE-575 has: the graphics card upgrade

  Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated

  @W1976, welcome to the forum.

  W1976 wrote:
  

  Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated

  No, the GTX 950 requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  There is no way to update the motherboard in the UEFI.  Latest video cards do not for UEFI were the GTX 660/670.  I suggest that you choose a manufacturer and contact their Technical Support to help them choose the best card for your system.

  You will also need to upgrade the power supply (PSU).  It is only 300W.  Most newer cards require at least 400W to work properly.  Although status map specifications at least 300 w, members reported that they had at least to 400W.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP PAVILION Elite: No Sound post-implementation upgraded to Win7Pro

  Finished smoothing new & hard disk install upgrade to Win 7 Pro of Win Vista.  All good - but no system sound, no music or video games. Sys administrator installed (as described previously on this site) drivers for Nvidia & Realtec - works very well (make me look stupid)!

  Home: able to test Nvidia with PC Doctor, sounds produced. Audio Realtek Highdef - however - is unable to produce a sound with PC Doctor test.  This system has speakers built into the monitor; all the sounds that functioned properly under the old system of Win Vista;  Checked plugs, all properly plugged in and connected.

  PC HP Pavilion Elite M9517C

  AMD Phenom x 4 processor the Quad Core 9550

  8 GB of memory; Hard disk 1000GO

  NVIDIA NFORCE 10/100 Mbps ethernet
  Replaced by (PNY brand) - graphics card NVIDIA GeForce GT630
  NVIDIA High Definition Audio
  NVIDIA nForce System Management Controller

  Realtek High Definition Audio, current driver version 6.0.1.5910, 04/08/2009

  I do not understand why sounds the function on the tech site - but not at home! I got speakers and headphones to try troubleshooting on the question, but my guess is it's problem of driver (s).

  All tips and steps to solve problems and resolve this problem?

  Hello:

  The only suggestion I can offer would be to:

  1. install the driver for the motherboard nvidia chipset in your model and restart.

  http://www.nvidia.com/download/driverResults.aspx/30520/en-us

  2. install the latest Realtek HD audio driver from the link below.

  Accept the agreement.  DL and install second driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

• HP Pavilion Elite HPE-450f: HP Pavilion Elite HPE-450f upgrade

  Greetings,

  Just a curious question about upgrading from my HP Pavilion Elite HPE-450f

  I am interested in getting a new video card, high-end and was curious about compatiability with my current card and the motherboard.

  Any help much appreciated.

  Data sheet:

  Mother: MS-7613 (Iona-GL8E)

  Processor: Intel core I7 870

  Memory: 12 GB PC3-8500 (DDR3-1066)

  Video: ATI Radeon HD5770

  OS: Win 7 (64)

  Hello

  Some models of the NVIDIA GTX 660 have a 2 GB memory.  Looking for a map of graphics used on eBay or Amazon. Another solution is to go to the card manufacturer recommendation.

  Thanks for posting on the forum.

• HP Pavilion Elite HPE 547c: upgrade graphics card for HP Elite

  I tried to replace/upgrade to update my graphics card for my desktop PC. I tried several video cards, but with each one, once it is installed and the computer turned on, the image does not register with the monitor. Everything else seems to work, but the monitor gives no answer. It was only a problem once the original video card has been removed. The current video card, I am trying to install is the NVIDIA GEFORCE GT 730.

  In the course of the years, I added a memory and the power supply has been upgraded, but all the rest are always original parts (http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/5035344/model/5074426/do...

  Is this a problem with the other parties, who will need to be replaced or is there something else I forget?

  Thank you.

  Hello

  You're dominant, in your case, the most important factor-BIOS compatibility... more recent maps, like the gt730, require the UEFI BIOS to run... you have a LEGACY BIOS system, and cannot do anything, unless you change your motherboard... your pc is a model of early 2011... UEFI standard HP in their systems of end of 2012...

  You can watch other maps, if... the 700 series card youre looking at is a maxwell model 2014... There are in this region that come with a feature of hybrid bios which offers wider compatibility on legacy systems... or you can look at maps more old pascal/fermi architecture that work exclusively on legacy BIOS systems...

  Hope this helps

  This answer solve your message or question?

  If Yes, then share the good news! Inform others that this response was helpful in accepting this solution.
  You can also show your appreciation by giving congratulations.

• Pavilion Elite m9340f: m9340f windows version upgrade from Vista 64

  I bought the Pavilion Elite m9340f in 2008, and the computer continues to work very well with the originally installed Vista 64-bit.

  I get notifications that both IE-9 that Google-Chrome 48.0.2564.103 m are no longer in charge and not working properly with many Web sites.

  I see a lot of people on the forums of the historical problems with Windows 7, 8 and 10 updates on the m9340f.  The HP support site clearly states that the m9340f has not been tested with Windows 8, and I don't see anything about HP confirming the test he m9340f with Windows 7 or 10.

  I am very careful about the updates of Windows does not properly with the hardware configuration of m9340f.  Can someone please give me some advice on the modernization of this machine for a version of windows that will allow me to have the features Google Chrome and IE, but will not do something elese to become non-functional.

  Thanks in advance,

  dberberick

  dberberick,

  The main reason I don't like the upgrade, is that the problems you had with the previous operating system tend to make their way in the new OS. You also have the previous residual files, which can cause problems.

  (1) what would be the result?

  If you haven't experienced or unfamiliar problems with Windows Vista, the upgrade to Windows 7 should be simple and without problems during migration.

  (2) what version of Windows 7?

  Unless you need functions of class Affairs (unique encryption, join a domain, etc.), it is not really a necessity for professionals.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• The upgrade of the video for my desktop HP Pavilion Elite HPE-210y PC

  Yes, I have two questions about my PC.

  First, on the technical card for desktop HP Pavilion Elite HPE-210y PC, it shows a power 300 watt yet looking at the minimum requirments for the video card from the factory it require a 400 Watt power supply and the fact of the data sheet does not show the power suppy manufacturer he was wondering has.

  Second, I'm looking to upgrade the video card and I was wondering what the card would be a good replacement for a game without having to replace the power supply but if I have to adapt what power? (With a ceiling of $ 200 - $350 on power supply)

  SCLAW wrote...

  First, on the technical card for desktop HP Pavilion Elite HPE-210y PC, it shows a power 300 watt yet looking at the minimum requirments for the video card from the factory it require a 400 Watt power supply and the fact of the data sheet does not show the power suppy manufacturer he was wondering has.

  Yes, the power is 300 watts. Minimum 400 watts are for full power to retail graphics cards. The map provided by HP was custom designed to meet the requirements of power weaker and is is not the same as a retail card. HP has traditionally used Bestec and Lite-on original UPE.

  SCLAW wrote...

  Second, I'm looking to upgrade the video card and I was wondering what the card would be a good replacement for a game without having to replace the power supply but if I have to adapt what power? (With a ceiling of $ 200 - $350 on power supply)

  To install a gaming grade graphics card, you will need to replace your power supply. The Corsair CX500 and CX600 are highly recommend and forum favorite. Further, these power supplies are only slightly larger than a block of power SUPPLY HP stock and are known to adapt. Power supply Idleness will put you back on the $50 - $75. For useful information on the selection of a graphics card that fits your needs, read Guide of Big_Dave of a discrete video card selection .

  Frank