The upgrade of the video for my desktop HP Pavilion Elite HPE-210y PC

Yes, I have two questions about my PC.

First, on the technical card for desktop HP Pavilion Elite HPE-210y PC, it shows a power 300 watt yet looking at the minimum requirments for the video card from the factory it require a 400 Watt power supply and the fact of the data sheet does not show the power suppy manufacturer he was wondering has.

Second, I'm looking to upgrade the video card and I was wondering what the card would be a good replacement for a game without having to replace the power supply but if I have to adapt what power? (With a ceiling of $ 200 - $350 on power supply)

SCLAW wrote...

First, on the technical card for desktop HP Pavilion Elite HPE-210y PC, it shows a power 300 watt yet looking at the minimum requirments for the video card from the factory it require a 400 Watt power supply and the fact of the data sheet does not show the power suppy manufacturer he was wondering has.

Yes, the power is 300 watts. Minimum 400 watts are for full power to retail graphics cards. The map provided by HP was custom designed to meet the requirements of power weaker and is is not the same as a retail card. HP has traditionally used Bestec and Lite-on original UPE.

SCLAW wrote...

Second, I'm looking to upgrade the video card and I was wondering what the card would be a good replacement for a game without having to replace the power supply but if I have to adapt what power? (With a ceiling of $ 200 - $350 on power supply)

To install a gaming grade graphics card, you will need to replace your power supply. The Corsair CX500 and CX600 are highly recommend and forum favorite. Further, these power supplies are only slightly larger than a block of power SUPPLY HP stock and are known to adapt. Power supply Idleness will put you back on the $50 - $75. For useful information on the selection of a graphics card that fits your needs, read Guide of Big_Dave of a discrete video card selection .

Frank

Tags: HP Desktops

Similar Questions

  • Which firewire cable do I need for computer desktop HP Pavilion Elite HPE-360uk

    Which firewire cable do I need for computer desktop HP Pavilion Elite HPE-360uk

    roches28,

    According to the specifications , it is an IEEE 1394 (aka Firewire 400) 6wire.

  • HP Pavilion Elite HPE-030sc: upgraded my desktop HP Pavilion Elite HPE-030sc computer

    Hi my product is a

    Desktop HP Pavilion Elite HPE-030sc (VS167AA-UUW)

    its kind of a simple question, but I can't find the answer anywhere

    I can opgrade my pc with the new graphiscard like this

    MSI GeForce GTX 2 960 GB of games PhysX PCI-Express 3.0

    If I can its large if not what is the most recent card I can buy

    I play Battlefield4 and I want to play with max resolution

    help me - thanks in advance

    Best regards, Torben

    Lazyboy_dk, welcome to the forum.

    The concern I have with the MSI GeForce GTX 960 Gaming 2 GB PhysX PCI-Express 3.0 is its length.  It's 10.5 ".  It is perhaps too long for the space.  In addition, it may require UEFI in the motherboard instead of a standard BIOS.  You can contact MSI Tech Support to see what they have to say.

    Most of the newer cards require UEFI, also.  The last card EVGA does not for UEFI was TG 640.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • "Freezes" the experience on my new desktop HP Pavilion Elite HPE - 578d

    Hello

    I had this problem haunting for the past two weeks. It's something minor, but extremely irritating.

    About 2-5 minutes after starting the computer, I noticed the HDD activity LED goes berserk for about 90 seconds, during this period, pretty much "freezes". I mean the mouse cursor could still pass a whole, but that's all. Nothing can be done. Most of the time I would be in my (Firefox) browser screen.

    Checks using Norton Internet security, with my PC came shows that no other program of 'suspects' is running other than firefox.

    My system is pretty much straight out of the box, except for the SSD that I replaced the primary transmission (had to install Acronis True image 2011 for this). I thought that the acronis could cause a few problems with the system so I went to the start to prevent to load initially. No joy.

    Is there another program I can install to diagnose this problem. It of not a big deal, only "freezes" for 90 seconds about a few minutes after I start the PC, but extremely irritating as it is a new system for me.

    Thanks for the advice given.

    Apparently, it's a problem documented with Intel 6 series motherboards and SSD Crucial drives.

    Complicated stuff.

    I applied the solution found here, to make a reg file to fix this problem, because I do not run win 7 with the mobo Intel H67 (Cleveland). It seems to have worked for now. Although I'm not sure how to "undo" it later when there is a problem of crucial / intel.

    [URL ="http://forum.crucial.com/t5/Solid-State-Drives-SSD/Solution-C300-Disk-Freeze-ups-in-Windows-7-solved-for-me/td-p/38766" "] http://forum.crucial.com/T5/Solid-State-Drives-SSD/solution-C300-Disk-Freeze-UPS-in-Windows-7-solved-for-me/TD-p/38766 [/ URL]

  • HP Pavilion Elite HPE-210y - upgrade power supply and graphics card?

    You just bought a new computer that I am generally satisfied, but it is not fit to play top games I like (for example Metro 2033).  I was looking into upgrading my graphics card and discovered that I have a 300W power supply.

    I heard that HP computers are notorious for difficulties in upgrading equipment thanks to the compact design the area.  What power supply and graphics card I should be able to use?  Information links and price would be very appreciated.

    I use my LG HDTV 32 "as a monitor and my current graphics card allows me to connect using an HDMI cable and play movies blu - ray via my PC.  I want to keep this feature.

    Thanks for any help!

    You need to open your PC and measure the physical dimensions of your diet.  Here is a list of the things to consider:

    1. Specifications
    2. Total power - important
    3. amperage 12 + v - important
    4. Modular - is not required, but I like the flexibility
    5. Warranty
    6. I7 and SLI ready
    7. Efficiency rating
    8. Cost
    9. The physical size - standard ATX PSU is 5.5 "by 5.9" by 3.4 "give or take a few tenths

    www.Newegg.com has many choices of power supplies.  Corsair, OCZ, Rosewill, Thermaltake...

    The amount of amperage + 12 volts is important when choosing a video card.  Depending on the size of the Cabinet from HP a 550-600 watt PSU should be plenty.  The NVIDIA GT 460 should be a good choice.

  • Video card (and others) upgrades for a HP Pavilion Elite HPE-510 t

    Hello... First of all, I just want to say that these forums have been an invaluable resource for me in my quest to upgrade my current PC. A lot of good answers and always at the top of the Google search results, you guys have been so super helpful. Without a doubt a very different experience from what I got when I bought my PC from a company that rhymes with 'hell '.

    I have a few specific questions, however, and thought I'd throw them to let experts weigh... For the record, I have a HP Pavilion Elite HPE - 510 t with all parts except for the video card, which is currently an ATI over-pants v4800. I am running three monitors 20 "(1 DVI and Display Port 2 at present, but who can be flexible). Also, I don't a few moderate games (FPS, MMO) and watch a lot of Netflix...

    1. I'm certainly looking to update my video card, but I do not know what actually fits. I'm ready to upgrade the PSU as well (probably to the Corsair CX-600 recommended elsewhere on this forum), so power should not be a problem. And money is not a huge problem either, as long as the card is less than $500 or more. I've been watching some of the newer cards (like a 680 GTX or even the new 770), but I'm afraid that they will not physically fit in the case, or will be not compatible with the motherboard (which seems to be the PCIe 1.0? Or I read wrong?). So basically, my ultimate question is: what is the best possible graphics card given my case current and potentially put to level power supply, motherboard, I could use? If it's important, SLI is feasible but not more.

    2. I also intend to add additional RAM. The page on the card to my PC to the HP support Site says it takes DDR3 1600 PC3 10600, but everything that I find these days in the RAM is DDR 3 1600 PC3 12800. My mother/PC card will support the 12800 or do I have to keep hunting to find 10600 sticks?

    3. and finally, I'll also put in a Pro 840 Samsung SSD. Do you know if the motherboard compatible with the SATA connectors suitable for speeds of 6 GB? Just plug page says "SATA" and does not specify a version.

    Any help you could give me on these questions would be greatly appreciated. This computer has served me well for a few years now, and I'm hoping to keep it for a few more years. Thanks in advance and have a nice day...

    Aaron

    Here are the specifications of plant origin and configurable options for your desktop HP Pavilion Elite HPE - 510 t CTO and here are the specs of his card mother IPISB-CH (Cleveland). According to the specifications, the motherboard uses the Chipset Intel H67 Express that supports an extension v2.0 x 16 PCIe and 3Gbs SATAII (SATA2).

    (1) SLI is not "feasible", so no need to go there. GeForce GTX 680 cards are going to be long, perhaps too long. You need to measure the space available at the back of the case more further along the x 16 PCIe slot to determine what can be installed. You will need to resign it a notch or two... until you find one that matches. The CX600 Corsair is a great choice and fits, even if you can buy the place CX600M. The CX600M is modular and allows much better management of the cables and so the potential for a better air circulation.

    (2) with regard to memory, the State of the plug;

    Four DIMM DDR3 240-pin connectors
    Supports the PC3 10600 connectors DIMM DDR3 (1333 MHz)
    Memory non - ECC, unbuffered

    Then, two sets of most of these (2 x 4 GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Kits should do the trick. You can also go to the website Crucial.com and use two of their 'guaranteed compatible memory upgrade'.

    (3) your computer supports speeds SATAII (3Gbs) and this is the best it will do. However, the SATA connector is identical to what is found on a SSD SATAIII and it should be compatible with your computer.

    Please send BRAVO

  • HP Pavilion Elite HPE - 500f D: SSD replacement for HP Pavilion Elite HPE-500f to original desktop PC hard drive

    Hi all!

    I would like to replace the original hard drive came with my desktop HP Pavilion Elite HPE-500f with an SSD, but when I tried, I got the error message that my SSD drive was not big enough. The original hard drive is 1.35 TB. What size an SSD should be to replace the original CT 1.35 supplied with my HP so that I could use the 1.35 disc as my second drive and the ssd as my main drive?

    Thank you!

    Hello

    Yes I think a 240 GB SSD would be sufficient.  Using the hard drive for storage is a good idea.

    These articles HOWTO HP should be useful.

    You should be able to install the SSD in the existing hard drive cage as it is put into service for three hard drives.  Use a 2.5 "to 3.5" adapter.  You also need a SATA data cable.

    Don't forget to create the external recovery media and backup your data.

  • Upgrading the PSU and GPU for my HP Pavilion Elite HPE-510 t

    Operaring system: Windows 7 64-bit

    CPU: Core i5-2500, 3.3 GHz

    Memory: 10 GB

    Video graphics card: GeForce GT 420 - OEM

    Hard drive: 1 TB

    Computer case: height: 38 cm (14.96 inches), width: 17 cm (6.69 inches), length: 41 cm (16,14 inches)

    Power supply: power supply 300W

    Several features of the product: HP Pavilion Elite HPE-510 t

    due to the diablo 3. I updated graphic setting the lowest. FPS is between 15-22 so I'm interested in upgrading my power supply HP Pavilion Elite HPE - 510 t(specs are above) and graphics card with the following, respectively:

    GPU: ASUS GeForce GTX 560 (Fermi) 1 GB 256-bit GDDR5

    GPU size: 9 "x 4.4"

    Power supply: Antec High Current Gamer HCG-750 750W Series

    "Power supply Dimensions: 7.1"x 5.9"x 3.4"

    I wonder if these prodcuts will enter the computer, as is or if I should look for other products.

    Thank you

    The ASUS GTX 560 should adapt and work very well. The Antec PSU is great and very likely to have problems in the space provided. It can interfere with connections to the motherboard and push against the CD/DVD discs. Please look at the Corsair CX600 instead. It is only slightly larger than the block of power SUPPLY HP stock and is known to adapt.

    Frank

  • Can I get the videos for all of the concepts of photoshop learning?.

    I have an account paying adobe... Can I get the videos for all of the concepts of photoshop learning?.

    All I see is that links like

    CC Photoshop tutorials | Learn how to use Photoshop CC

    Above links are available even without an account.

    Should I have any extra advantage to access additional videos (as in lynda.com where they have the series of videos that explain how to do something with explanation of the concept)

    Originally, there was a selection of 'members only' videos on the Adobe Web site. But this project was abandoned and all content has been made public.

  • Prepare the video for Flash

    I have some videos that I prepared to play Flash on a website, but I have mucho problems get Flash to recognize the files that I want to play. I use Final Cut Studio - preparation FCP and compressor to encode. Should I do something bad encoding or prepare the video for Flash. I would use Adobe encoder, but is not compress anywhere near the necessary efficiency, so I'll try to properly prepare their in the compressor.

    Any suggestions/advice?

    you create flv files?  If so, you use the flvplayback component in flash to play the flv file?

  • HP Pavilion Elite HPE-575 has: the graphics card upgrade

    Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated

    @W1976, welcome to the forum.

    W1976 wrote:

    Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated

    No, the GTX 950 requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  There is no way to update the motherboard in the UEFI.  Latest video cards do not for UEFI were the GTX 660/670.  I suggest that you choose a manufacturer and contact their Technical Support to help them choose the best card for your system.

    You will also need to upgrade the power supply (PSU).  It is only 300W.  Most newer cards require at least 400W to work properly.  Although status map specifications at least 300 w, members reported that they had at least to 400W.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • HP Pavilion Elite HPE-555sc desktop PC - will not get past the first screen of the BIOS

    Hello

    Since yesterday my PC, a HP Pavilion Elite HPE-555sc desktop computer, does not start. It freezes at the start screen "HP".

    It only allows me to enter the BIOS and it meets no other entry.

    I thought it might be the motherboard.

    Is anyone know about this problem? Is it already happened?

    It comes to my PC

    My PC was already supposed to be an upgrade, but I would like to know if this can be corrected before I create a new.

    I knew no more probably is not on warranty.

    Thank you.

    Hello

    Which is usually caused by a corrupt BIOS. You can clear the CMOS. Sometimes, but not always, which solves the problem.

    It is of the card mother reference web page.

    Look for the clear instructions of the CMOS. The instructions do not specify this, but it is best to remove the RTC battery before performing the clear procedure of CMOS.

    While the RTC battery is out and the PC unplugged, press and hold the power switch of the PC for about 15 seconds. When you replace the RTC dough the + must be facing upwards.

    Best regards

    ERICO

  • HP Pavilion Elite HPE - 337c: right click on the taskbar for programs no longer works.

    1. product name and number: HP Pavilion Elite HPE - 337C

    2. operating system: Microsoft Windows 7 Edition Home Premium (64-bit); Service Pack 1; Build number 7601; Version of DirectX 11.

    3. error message: None; wish that it is.

    4. all changes made to your system until the problem occurred: Geez, there was so much.

    Problem: It used to not be that way.  Whenever I right click on a program open on the taskbar, and move the mouse to the added elements or recent-objects, disappears from the list.  The mouse does not work, but I can still use the cursor up/down arrows to select the item, press ENTER, and it works.  But there may be other problems related to the use of the mouse; We'll save those for later.

    Thank you

    Hank

    There is the possibility that there is a third-party shell extension that is the cause of the problem. You can analyze that yourself with a free utility called ShellExView. This may take some trial and error, deactivation and activation on your part.

    Only disable a single extension, both for troubleshooting, then turn it back on. If too many extensions at the same time, more specifically shell extensions Microsoft is off, then you might get a operating system unbootable.

  • the HP Pavilion Elite HPE-410y desktop PC supports more than one hard drive

    topic says it all...

    the HP Pavilion Elite HPE-410y desktop PC supports more than one hard drive

    Hello

    ' HP ' how-to ' article should be useful.

    My e9280t has the same firm and the drive cage holds two drives.

  • Update the bios HP Pavilion Elite HPE - 480t CTO Desktop PC

    I just bought a hard drive 3 TB to my HP Pavilion Elite HPE - 480t CTO and he only sees a drive 746,52 GB under Windows 7 pro 64 bit. My main drive is a 1.5 to and he sees very well. where can I find an update of the BIOS using the new drive? I have been to the page "downloads of software and the driver" and it does not list one. Am I out of luck?

    When I ran Paragon booted from a USB stick to copy my 1.5 TB drive it given the disk as a disk of 2.7 to so I think the bios is seening it?

    EDIT: The Intel rapid storage technology software sees as 2 862 TB, but windows doesn't see 746,52 GB.

    Thank you

    Curtis

    Solved!

    Update card mother sata drivers and program "Fast storage Intel technology" and it now works fine.

    Went to ma-configdotcom and ran their detection app and it recommended JMB36X_WinDrv_R1.17.65_WHQL_eSATA.zip of JMicron and Intel's SetupRST.exe. I ran both, restarted the computer and viola! He works and see all the new drive.  I hope this helps someone else.

Maybe you are looking for

  • Apple lost ID

    My mother made me an Apple account Id just now and I bought a lot of things on their. My mom deleted her email she used in the apple ID and I can now connect new in it and I need to know if it is not possible to reconnect

  • appearance of the text on the Web page

    text on Web pages is thin / fragile appearance / hard to read. Is not the size of the police here. is after the download of Firefox on my computer

  • Satellite L655 - keyboard problems (toolbar space, #6 and #4)

    space bar, #4, and #6 do not work... I have to use ALT + 32 for each space, do you know if there is a problem of production?... Can I replace my keyboard under warranty? Hope you can help me

  • Override pre-batch reminder

    Hello TS 4.1using the batch process model - pre-batch is a two-step 1. tell the dialogue for the next DUT 2. wait for the dialog box. I need to change the #1 step, but still want to use step exsisting #2 - waiting for sous-suite of dialogue. How to c

  • Cannot install scanner driver to scan Brother MFC J430W.

    Hi all I have a problem installing the driver for the scanner to MFC J430W.  It happens on my Windows 7 PC. For XP, Vista and Win 8, I managed to install the driver to scan successfully. In the process of installation, I got the following errors "ISO