HP Pavilion Elite m9040n Desktop and Fire Wire 1394

Similar Questions

• HP Pavilion Elite m9040n Desktop PC card mother Layout

  I have a desktop HP m9040n and was tinkering autour inside. Long story short, I don't remember where the 2 hard drives and the cd player plug on the motherboard. All 3 are sata and can't seem to understand what command and ports as sata cables plug in. If someone could help me out here, it would be greatly appreciated.

  http://support.HP.com/us-en/document/c01077641

  Hello Bostel, when you look at the motherboard in the case, the lower right corner is where the Sata ports.

  The port0 is on the right of the Sata ports closer to the top of the Board of Directors. This is the port where the hard drive0 or hard drive must be connected to.

  The port in front is where I connect the second hard drive and the port under the port1 is where to connect the DVD player.

  It was suggested that the Sata port0 is the boot hard drive port, but I connected the hard disks and DVD drives at all of these ports at one time or another and found no difference in the performance of the system.

  This could make a slight difference if you have the hard drive configured in a Raid array.

• I have a HP Pavilion Elite m9060n desktop PC and want to have two monitors.

  1. I have a HP Pavilion Elite m9060n desktop PC and I have my monitor connected to my computer using the NVIDIA GeForce 8500 GT DVI - I port chart.  I want to use two monitors and on the back of the computer in dos I/O ports there is a VGA slot but there is a black top, lid that States do not remove.  This means that the port is not available?
  2. I have also a port HDMI as part of The NVIDIA GeForce 8500 GT can I use that and the DVI port on the NVIDIA GeForce 8500 GT to have two monitors?
  3. Can I use a DVI splitter with DVI-d port on the NVIDIA GeForce 8500 GT to have two monitors?

  NVIDIA GeForce 8500 GT

  

  

  1.I have a HP Pavilion Elite m9060n desktop PC and I have my monitor connected to my computer using the NVIDIA GeForce 8500 GT DVI - I port chart.  I want to use two monitors and on the back of the computer in DOS i/o ports, there is a VGA connector, but there is a black top, lid that States do not remove.  This means that the port is not available?

  YES, the white cover means that the port / ports are not available. Most HP consumer computers automatically disable the onboard graphics when a x 16 PCIe graphics card is installed

  2.i have also a port HDMI as part of the NVIDIA GeForce 8500 GT can I use that and the port DVI on NVIDIA GeForce 8500 GT to have two monitors?

  Yes, you can use the HDMI and DVI-channels simultaneously to support two monitors. Here are the specifications of your desktop HP Pavilion Elite m9060n. According to the specifications;

  1 - S - video *.
  2 HDMI
  3 - DVI - I (dual link) *.

  Supports two displays at the same time

  According to observers, you may be able to use your current configuration to drive two displays. You can use two HDMI screens with a HDMI and a DVI-HDMI cable. You can use two monitors DVI - D DVI cable with a DVI-HDMI cable. You can also use a monitor VGA and HDMI or DVI - D and VGA monitor with appropriate adapters and/or cable. Please provide the brand and models of two monitors for most accurate response.

  3. can I use a DVI splitter with port DVI on NVIDIA GeForce 8500 GT to have two monitors?

  N °

• With my HP Pavilion Elite m9250f desktop PC, I have problems to get the network and the other driver.

  With my HP Pavilion Elite m9259f desktop computer, purchased in 2008, I have problems to receive a network and other drivers. In addition, I can't find my recovery disks.

  Any help would be much appreciated.

  Rebecca O

  Hello:

  If you post them details of the device string ID for each device in the Details tab in XP, I can send you the link for the drivers.

  For now, I can send pilots based on the material in the manual, and if your PC has different hardware, so I could waste your time and mine.

  Always install the first chipset driver:

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20019&ProdId=2842&lang=eng&OSVersion=Windows%20XP * & DownloadType=.

  This should be your integrated graphics driver:

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18774&lang=eng&OSVersion=Windows%20XP%20Professional * & DownloadType=.

  Audio: Accept the agreement. Download and install the 3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Network: Download and install the 6th on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  If none of them do not work, please post the hardware ID so I can help you further.

  Paul

• Pavilion Elite M9040N turns on or turns off continues

  I have a Pavilion Elite M9040N media center desktop computer and it began to turn and turns off constantly.  The fans, the DVD player and the power that all light turns on for about 3-4 seconds then it turns off for 3-4 seconds, then starts the cycle again.  Does not get the bios start and nothing appears on the monitor.  I changed the power supply hoping that was the problem but no luck.

  Anyone encountered this before?

  Anyone know what is happening?

  Thank you

  John

  Final update

  Thus, the slot and off tension of the issue was due to a fault on the motherboard.  In order to get what they functional system once again I have had to replace the motherboard and video card (I don't know why, but this card is not as well).  I also replaced both of the hard drives, upgrade to the C: 1.5 TB drive and a D: 2 TB drive and power.  I bought a new copy of windows 7 64 bit and did a new install and updated all the drivers.  I was able to transfer all of our data, photos, music, etc. among the old readers on the nine with an external SATA cable.

  I'm happy to be up and running again but in hindsight, I have pretty much rebuilt all of the computer.  I hope that this will last a few years.

  Thanks for all your help and suggestings

• HP Pavilion Elite m9470 Desktop PC VISTA' "XP need drivers for XP!

  Hello, before sorry all abaut my inglish.
  
  I bought this "HP Pavilion Elite m9470 desktop PC", but it comes with VISTA and VISTA and just don't get along... so I format and install XP, the problem is I can not find drivers anywere for chipset, audio network... etc.
  
  Can someone help me?     And tanks anyway...
  
  Best regards
  
  Edgar Afonso
  
  

  I meant the full model number...

  m9470a
  m9470es
  m9470gr
  m9470it
  m9470nl
  m9470pt
  m9470sc

  I guess that's m9470pt, since I took the time to look through the plug of each and it is the only one with Nvidia 6150se Chipset?

  NVIDIA Chipset:

  http://www.nvidia.com/object/nforce_winxp_15.24.html

  Realtek HD Audio:

  FTP://66.104.77.130/PC/audio/WDM_R212.exe

• HP Pavilion Elete m94021: 64-bit Windows 7 keeps freezing without error on HP Pavilion Elite m94021 desktop PC

  Windows 7 64 bit continues to freeze without error on HP Pavilion Elite m94021 desktop PC.  He'll go sometimes for several hours without freezing it sometimes minutes. The problem seems to become more common.

  Thanks for the reply and information. I had read the document before and tried different options, including a resumption of systems.
  I brought the PC to a specialist, so far, they have not been able to find the problem. Would it be the Mo or graphics card?

• Running 4 monitors 1920 x 1200 on a Pavilion Elite I7 desktop PC (a double graphics - GTS 250 cards)

  Update (November 14, 2011): there is a happy ending at the bottom of this thread. In a Word, I needed to upgrade my 700W power and install a ~ XFX HD 6870 (AMD/ATI) $ 200 video card, connect 2 monitors to 6870's connectors 2 mini DisplayPort and connect the other 2 monitors to 6870's DVI connectors.

  In the original post, I went to get a second GTS 250 but I was able to do it with a single card.

  Original message:

  I have already noticed that my system (HP Pavilion Elite e9180f desktop PC) supports dual Nvidia GTS 250 in the thread next where I'm looking for advice for upgrading my system to 4 monitors:

  http://h30434.www3.HP.com/T5/desktop-monitors-and-video/how-do-I-upgrade-my-Pavilion-to-4-monitors/t...

  I need to buy a second card Nvidia GTS 250, but they are hard to find.

  The 250 GTS that came with the PC has 1 GB or RAM on it. I've only been able to find a 250 GTS with 512 MB of RAM above. Both cards will co-exist on my system if I can run 4 monitors?

  I'm tempted to just bite the bullet and order 2 new cards as the GTS 250 that I find can take up to two weeks to get.

  Can anyone recommend a modern replacement model for the GTS 250 (1 GB RAM) I can buy 2 and then installed in my machine (Elite e9180f) with a minimum of hassle?

  I ordered (and received) a new PSU POWER 750 watt and 3 additional monitors to 24 "(et un stand)."

  Thank you

  Because I'm a spread for the penalty, I went ahead and ordered the XFX HD 6870 and returned the XFX HD 6850.

  Only after you have installed the 6870 I realized this video card requires 2 PCI express power connectors. Of course, my stock PSU only has a PCI express slot so I went down to Staples and bought a power supply 700W (a RetailPlus PS700W). I installed myself (without the help of a technician that I had seen what the technician had to do when I hired one to try to replace the stock power supply with a Corsair 750W) and it worked. It was last Thursday and the machine works since then.

  The 3 HP ZR24w monitors I ordered came with a regular DisplayPort cable but I needed 2 Mini DisplayPort to DisplayPort cable. I have ordered them to my place of local parts (OEM Express) and they came today.

  I plugged praying them, and then they played.

  So to get 4 monitors running a single card, I had to put my diet to 700 watts, install a XFX HD 6870 (it's a Radeon ATI/AMD with 2 x connectors DVI, an HDMI connector and mini 2 DisplayPort connectors) and order 3 HP ZR24w monitors. 2 monitors should be connected via the adapter mini DisplayPort to DisplayPort Cables and the other 2 are connected via DVI.

  From what I can tell, HD 68 x series video cards can drive only 2 DVI monitors at a time and if you need at least 2 aswell able DisplayPort monitors.

• HP Pavilion Elite m9340f desktop PC, want to upgrade of the GeForce GT 545 1536 MB DDR3 PCIe 2.0 x 16 video Ca

  I have a Hp Pavilion Elite m9340f desktop Pc, I want to upgrade to a Geforce GT card 545 1536 MB DDR3 PCIe 2.0 x 16 video, my pc has a 350 Watt PSU, but the video card requires a 300 watt with 18A on the + 12 Rail. The PC will support it?

  Looks like it should work perfectly... just open the side cover and check that your power supply provides a minimum of 18Amps on the 12 v rail. My HP (HP p/n 5188-2625) 300 Watt POWER supply has a power of 19A on the 12V rail.

  Frank

• I have a HP Pavilion Elite e9250t desktop PC and I want to upgrade my video card

  I have a PC desktop, HP PAVILION Elite e9250t with the specifications below. What graphics card can I go to? I currently have the Radeon HD 4650 with 1 G memory in the form of video card. I want something more grand, better and faster to run Borderlands 2 on high ground. I'm burning my card at 1920 x 1080.   Help, please.

  Processor: Intel (r) Core i5 CPU 750 @ 2.67GHz

  Graphics card: ATI Radeon HD 4650

  Total RAM: 12.0 GB

  The Kinder answer is that you must decide what is important.  Go to this site and use the section "I can run." You can put in different maps and display the results. But the game you questions about the needs at least the GTX560.

• I have a HP Pavilion Elite i7 Desktop w Windows 7 and I want to add a 3 TB hard. I can?

  I have an i7 HP Pavilion Elite Desktop w 2 year, Windows 7 and I want to add a 3 TB hard.  Can I add a 3 TB hard (probably known as the Segate Barracuda XT 3 TB HD) as a secondary disk without changes.  If this is not the case, what should I do?

  Short answer is not really. You need UEFI BIOS to do, and your system did not come with it. You could add it, but only 2.2 to be visible as a single drive. Using utilities... etc. of the manufacturer of the HARD drive, you could partition to see the rest, but as hard disks get bigger, the BIOS must change to adapt. They changed, but still yours is the older BIOS inherited, and there is no way to change it to a UEFI version.

  Sorry

  Bill

• HP Pavilion Elite e9120y desktop PC and compatibility with video cards

  Hello

  I hope someone can help me: I tried to find the answer to this question, but can't seem to nail a definitive answer.

  I need to update my video card as soon as possible and I need to know if the mother of desktop PC HP Pavilion Elite e9120y (plug herehttp://support.hp.com/us-en/document/c0174290) supports a Sapphire 1 GB Radeon HD 5670 video card

  I know I have to upgrade my power supply at least 400W

  I'd appreciate any help

  Thank you

  This widget could not be displayed.

• HP pavilion elite m9500y desktop: power HP pavilion elite m9500y

  Hello

  I have a HP pavilion elite m9500y.

  Here is the link for the specification.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c01616194

  Suddenlty, it starts with black screen.

  After the filming of the power, I can't hear any sound out of the computer.

  My keyboard does not work. So I can't access my pc.

  I checked the memory cards and replace the motherboard battery.

  Nothing happened.

  So, I guess that the power supply is the problem.

  I wonder what food I buy.

  It requres 350W psu.  I'm not sure that it is acceptable to replace with power supply higher than W, such as 450W or 500W.

  So, here are my questions.

  1. What is wrong with my computer?

  2. If the power supply is the problem, should I replace 350W psu or W higher for the future?

  3. If I want to up grade my pc in the future, what would be the best option?

  I look forward to hearing your advice.

  With the case open and observing the CPU fan and projector, try the suggested PSU convenience store.  What is going on? If you decide to replace the power supply, I would suggest the Corsair CX600W. The system will build only what suits him, and you will have POWER supply that is quieter and more effective.  If no upgrade (GPU) is already planned, the Corsair CX500 is for sale.

• Ram HP Pavilion Elite m9040n upgrade options

  Hi, my question has to do with what is the best ram to fill my ram slots with. I run windows 7 Ultimate 64 bit and I don't know that I can fit 8 GB total. I'm in recording music with a large number of devices. I have things like a console 003, a 11Rack, a Boss GT - 10, as well as a Piano Yamaha G-1. All are via USB except the 003 (Firewire connection).

  I have a report of sandra to take account of my diet and updates of graphics card.

  Sandra Report!

  SiSoftware Sandra

  Computer

  Model: HP-Pavilion, GN553AA - ABA m9040n

  Working Group: task force

  Host name: Marshall-PC

  User: Marshall

  Processor

  Model: Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz

  Speed: 2.4 GHz

  Cores per processor: 4 unit (s)

  Threads by heart: 1 unit (s)

  Type: Quad-Core

  Built-in data cache: 4 x 32 k, the size of online synchronous, Write-Thru, 8 channels, 64 bytes

  Edge L2 Cache: 2 x 4 MB, ECC, synchronous, ATC, 16 channels, 64 byte line size, 2 son sharing

  Computer

  Motherboard: Asus Berkeley

  BIOS: FRIEND 5.13 24/10/2007

  PCI, ISA use: X - Bus PCIe IMB USB FireWire/1394 i2c/SMBus

  Support multiprocessor (MP): No.

  Advanced multiprocessor PEAK (APIC): Yes

  Total memory: 3GB DDR2 DDR3 DIMM

  Chipset

  Model: HP P35/G33/G31 processor to i/o controller

  The front side Bus speed: 4 x 267 MHz (1 GHz)

  Total memory: 3GB DDR2 DDR3 DIMM

  Channels: 2

  Memory Bus speed: 2 x 334 MHz (668 MHz)

  Bars of memory

  Memory module: Micron 8HTF6464AY - 667 7 512 MB DIMM DDR2 PC2 - 5300U DDR2 - 666 (5-5-5-15 3-20-5-3)

  Memory module: (Hyundai) to Hynix HYMP512U64CP8-Y5 1 GB DIMM DDR2 PC2-5300U DDR2-666 (5-5-5-15 3-20-5-3)

  Memory module: Micron 8HTF6464AY - 667 7 512 MB DIMM DDR2 PC2 - 5300U DDR2 - 666 (5-5-5-15 3-20-5-3)

  Memory module: (Hyundai) to Hynix HYMP512U64CP8-Y5 1 GB DIMM DDR2 PC2-5300U DDR2-666 (5-5-5-15 3-20-5-3)

  Video system

  Video card: NVIDIA GeForce 9800 GTX + (128 SM4.0 1.7 GHz, 512 MB of DDR3 2.2 GHz 256 bit PCIe 16 x 2.00)

  Video card: NVIDIA GeForce 9800 GTX + (128 SM4.0 1.7 GHz, 512 MB of DDR3 2.2 GHz 256 bit PCIe 16 x 2.00)

  Graphics processor

  OpenCL processor: NVIDIA GeForce 9800 GTX + (128SP 16 c 1.84 GHz, 512 MB of DDR3 2.2 GHz 256-bit)

  Compute Shader Processor: NVIDIA GeForce 9800 GTX + (128SP 1.7 GHz, 512 MB of DDR3 2.2 GHz 256-bit)

  Storage devices

  Hitachi HDT725032VLA380 (320 GB, SATA300, 3.5 ", 7200 RPM, 7 MB of Cache memory): 298 GB (C (D)

  Generic-Compact Flash (USB): N/a (H

  Generic-SM/xD-Picture (USB): N/a (I

  Generic-SD/MMC (USB): N/a (J

  Generic-MS/MS-Pro (USB): N/a (K

  TSSTcorp CDDVDW TS-H653N (SATA150, DVD +-RW, CD - RW, 2MB Cache): n/a (E

  Logical storage devices

  SysReserved: 100 MB (NTFS)

  Hard drive (C : 289 GB (NTFS) @ Hitachi HDT725032VLA380 (320 GB, SATA300, 3.5 ", 7200 RPM, 7 MB Cache))

  FACTORY (D : 9 GB (NTFS) @ Hitachi HDT725032VLA380 (320 GB, SATA300, 3.5 ", 7200 RPM, 7 MB Cache))

  Removable disk (H : n/a @ generic-Compact Flash (USB))

  Removable drive (I : n/a @ generic-SM/xD-Picture (USB))

  Removable drive (J : n/a @ generic-SD/MMC (USB))

  Removable disk (K : n/a @ generic-MS/MS-Pro (USB))

  Optical drive (E : n/a @ TSSTcorp CDDVDW TS-H653N (SATA150, DVD +-RW, CD - RW, 2MB Cache))

  Devices

  LPC Hub Controller 1: HP (ICH9) LPC Interface Controller

  LPC Legacy controller 1: Asus F8000

  Audio device: HP (ICH9) HD Audio Controller

  Audio codec: Realtek Semi 888 high definition Audio

  Serial Port (s): 1

  Disk controller: HP (ICH9) 4 port Serial ATA Storage Controller 1

  Disk controller: HP (ICH9) 2 port Serial ATA Storage Controller 2

  USB controller 1: HP (ICH9) USB Universal Host Controller

  USB controller 2: HP (ICH9) USB Universal Host Controller

  USB controller 3: HP (ICH9) USB2 Enhanced Host Controller

  USB controller 4: HP (ICH9) USB Universal Host Controller

  USB controller 5: HP (ICH9) USB Universal Host Controller

  USB controller 6: HP (ICH9) USB Universal Host Controller

  USB controller 7: HP (ICH9) USB Universal Host Controller

  USB controller 8: HP (ICH9) USB2 Enhanced Host Controller

  Controller FireWire/1394 1: HP FW322/323 IEEE1394 OHCI FireWire controller

  SMBus/i2c controller 1: Intel ICH SMBus

  Printers and faxes

  Printer: Microsoft XPS Document Writer (600 x 600, color)

  Fax: Microsoft Shared Fax Driver (200 x 200)

  Printer: Adobe PDF Converter (4000 x 4000, color)

  Devices

  Network services

  Network card: Intel(r) 82566DC-2 Gigabit Network Connection (Ethernet 100 Mbit/s)

  1 wireless adapter: USB wireless 802.11 b/g adapter

  Power management

  (AC) line status: online

  Operating system

  Windows system: Microsoft Windows 7 Ultimate 6.01.7600

  Compliance platform: x 64

  Windows experience index

  Current system: 5.7

  Increasing tips

  Tip of 2546: memory large-capacity Modules must be ECC/parity.

  Tip 2: Double click on advanced or press ENTER, while a tip is selected for more information on the tip.

  Hynix and Micron produce good RAM modules. I suggest that you go for 4X2GB DDR2-800 memory sticks. Here are the specifications of memory supported by the motherboard:

  Dual channel memory architecture
  Four connectors DIMM DDR2 240-pin
  Supported DIMM types:
  DDR2-800
  DDR2-667
  Memory non - ECC, unbuffered
  Supports DIMM DDR2 2 GB modules
  Supports 8 GB on 64-bit PCs
  Supports 4 GB * on 32-bit PCs
  NOTE: * actual available memory may be less

• Pavilion Elite HPE150f desktop: windows 7 64 bit desktop

  someone can answer my question please, when I first bought this desktop computer in April 2010 labeling software Lightscribe disc was pre installed, Lightscribe start-up, Direct disc Labeling, Lightscribe Public SDK, Lightscribe Control Panel, utility window diagnostic of Lightscribe, lightscribe labeler of simple drive Lightscribe Lightscribe demo site, I could click on any one of these and they would take me to the site where I could download the updates and new drive models labelling, I used them several times during my own films.

  Now when I click on the links I get a 404 message, it is still on my laptop husband who bought at the same time and it can burn its records with the models.

  I downloaded the trial version of Audio Labeler, but they want me to pay for the models, I always have my username and password for Lightscribe but can't find it anywhere.

  I contacted Labeler Audio on the forum here and they say that HP holds the license for Lightscribe for life, but they have no record of my user name and password, at the end of 14 days, I'll have to no longer use of the Audio unless labeling software I buy it. How can I get my own Lightscribe return? If anyone can help, I'd appreciate it.

  Hi there @emma22
  
  I understand that you are looking for assistance with the Lightscribe software. I'm happy to help you.

  Try this site, they have the latest version that created HP and other tools.

  LightScribe System Software - lightscribesoftware.org

  Let me know if it works for you.