Pavilion Elite M9040N turns on or turns off continues

Similar Questions

• HP Pavilion notebook15-ab035ax: computer HP Pavilion 15 laptop turns off suddenly on low battery

  I bought my hp laptop Pavilion in India. Now, I live in England. For the last month or two, I have problems with my laptop. Whenever the laptop is on battery power, it does very quickly. It randomly stops (no stops, just turned off with a gut wrenching tinkling of the hard drive) at any time under load of 50%. no notification of low battery or go into hibernation. It can happen in the middle of typing a sentence or you to browse.

  I ran the diagnostic. Software battery check HP first showed a result of "low battery." I was about to order a new battery, when I ran the software once again, who now says "main battery OK.

  It's very confusing, because even if we agree that the battery has developed a problem, I do not understand why the system is not detect low battery or putting the computer to Hibernate, depending on settings. I checked the drivers - updated.

  The laptop is just a year and 3-4 months.

  Should I replace the battery? Or is it a software error in the new upgrade of windows 10?

  Any help will be appreciated.

  Thank you!

  Hi@drsunny,

  Welcome to the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  Questions on the PC to charge the battery. Is this fair?

  Thank you for sharing the details of the problem. I want to help you.

  I recommend that you try to perform the diagnostic tests for the battery and check if that is any hardware problem. Use the link below to perform the diagnostics.

  http://HP.care/2eiMy8z

  I hope this helps. Let me know to learn more.

  Happy announcement.

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

• Pavilion dv6 Wireless turn off by itself

  Pavilion dv6 1140ew with Windows 7. Each drivers are up-to-date. The system has been reinstalled recently so no virus is present.

  And that is the problem. The computer turns off randomly wireless features. The blue light on the Power button tab will become Orange, as it has been disabled manually. I can't turn it on again for a while. Sometiems, it requires a reboot to re - activate. I found no specific reason why it happens. There is no model when it occurs. Sometimes during a movie, when the internet is not used at all. Sometimes during a game, online when it is certeinly. It takes 10 minutes to 2 hours to reactivate itself.

  Would appreciate any help, as it is very frustrating.

  Hello Schanez,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your wireless network is disabled and you want to prevent from happening. I'm you provide a document from HP support:laptops HP - Setup to solve Internet connection problems on a wireless network with Windows 7 and, which contains steps to help you solve this problem. I would focus on turn it off device power management section of the options I have installed wireless on below:

  Most wireless devices can be configured to turn off the power to reduce the drain on battery power. This is usually not a problem when the laptop is connected to an AC adapter. However, during battery operation, the adapter can be turned off to save energy. To disable this power setting, follow these steps.

  1. Click on start and enter the device in the search box, and then select Device Manager from the list.
  2. Double-click network adapters to lengthen the list, do a right click on the adapter for wireless (WiFi) in the list and select Properties.
  3. In the map properties window, click the power management tab, and then deselect allow the computer to turn off this device to save power option.

  Close Device Manager, restart the laptop and trying to reconnect to the wireless network.

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a great day!

• G6-2005ax Pavilion: Bluetooth auto turn off HP Pavilion g6-2005ax

  I have a HP Pavilion g6-2005ax with 10 64-bit windows. After the upgrade I have problems with the software resets. For example. The bluetooth is disabled automatically. When I enable it and restart the bluetooth system is disabled again. I want to know if there are any bluetooth driver being upgraded for windows 10 for my laptop. Or in any case in which I can use bluetooth.

  Hi @Yogizer,

  Welcome to the HP Forums!

  This is a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that you have upgraded your system from Windows 10. Since the upgrade, you have encountered problems with the software resets. An example is that your bluetooth is disabled automatically.  You need to activate every time that the computer restarts.

  When I checked the page drivers and software of PC Notebook Pavilion g6-2005ax there is not all the updated drivers for Windows 10.  This means that HP has not tested 10 Windows on your laptop. This does not mean that it will not only work the result is unknown.

  Here are two links that should help you in the acquisition of pilots.

  HP computers - update drivers and software with Windows Update (Windows, 10, 8)

  Download or update of software and drivers for HP computers

  Alternatively, you can try the following steps.

  Step 1. Go into Device Manager and click on Bluetooth to expand the list.
  Step 2. Right click on "Bluetooth Peripheral Device" you want.
  Step 3. Select "Update driver software."
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)".
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  While you are in Device Manager, right-click on your Bluetooth device and choose Properties.

  Click the power management tab.
  If" allow this computer to turn off this device to save power' is checked, please delete, then click on apply.

  If you are unable to connect to a Bluetooth device, try the following:

  1. type of step' change device' in Cortana.
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device application option.
  Step 5. Click on save changes to save the settings that you select.

  So, you can try this:

  Step 1: Go to Cortana and type "services.msc" and press ENTER.
  Step 2: Now find 'Bluetooth Support Service' and double click on it (under the general tab you can change startup automatically if you wish).
  Step 3: Now click on Connect tab and type "Local Service" without the quotes, if it is not already displayed.
  Step 4: Now, remove the passwords and leave the password field blank.
  Step 5: Click on apply in the lower left corner.
  Step 6: Click on the Recovery tab, and make sure it is set to restart the service after the failure of the first and the second and change it if necessary and click on apply.

  As this occurred after upgrading Windows 10 and MIcrosoft offers support for Windows 10, you can contact them for assistance.

  Microsoft Corporation / customer service

  1-800-642-7676

  Microsoft contact us

  Please let me know if this helped.

  Good luck!

• Pavilion d4595.se turns off right after starting

  Have a Pavilion d4595.se that have suddenly started to fade.

  I can start it up, but after a few seconds to a few minutes it just turns off.

  I opened and cleaned all the dust, but the problem was the same afterwards.

  Checked the capacitors on the motherboard, but none seems to be broken (no signs of swelling)

  What can be the problem?

  I reset the Bios by removing the battery then start.

  Then stop, unplug the cable, then again with the battery.

  Restarted A > unsuccessfully

  I removed the big NVIDIA graphic card and plugged the monitor into the integrated Graphic card.

  > Success!

  Now it works, do not close itself a since I removed the external Graphic card.

  I set up everything I have parts previous dismouted

  I've updated the drivers for the integrated graphics card.

  Re-check the graphics card removed in another PC to see if it is the card or the AGP port

  on the motherboard which is broken, another day...

• HP Officejet 4500 G510: Printer itself turns on and turns off continuously and does not print because it's on if briefly

  OFFICEJET 4500 HIMSELF GOES TO MARKET AND STOP PERMANENTLY SO DOES NOT PRINT BECAUSE IT OF ON IF BRIEFLY AND TO BED 'WARM UP' WHEN TURNED ON THEN TURNS OFF.

  The troubleshooting in the here document steps can help solve the problems of power with the g510 printer Officejet 4500.  If you need to replace the power supply I got good results in purchasing supply power modules on eBay or Amazon.

• Airplane mode turns off (continuous WiFi turn on)

  I have this problem.

  I can not activate airplane mode because after a few seconds it shuts itself.
  I noticed that this is caused by Wifi. Every time I have disable Wifi (or activate airplane mode) comes on again after several seconds causing Airplane mode is turned off. Although bluetooth remains off.
  Does anyone know any solution for this?
  The computer is DELL XPS 12.

  Hi Robertas,

  Some computers have the ability to enable flight WIFI mode. You must use the help file on your computer to know how to turn off wireless. Dell computer mostly for example using the function keys with a turn on that radio icon.

  For more information:

  What is airplane mode?

  http://Windows.Microsoft.com/en-ID/Windows-8/what-is-airplane-mode

  Wireless devices are enabled once you enable flight mode in Windows 8

  http://support.Microsoft.com/kb/2793840

  Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• my HP Pavilion p7 - 1267c turns off during startup

  Hi, my HP Pavilion p7 - 1267c close while I was reading a Web site with no other programs running. When I turn it back on it will start to start and say "keyboard error" and I won't be able to choose all the options during the startup. Then it goes to a screen saying a recent change in software or hardware may have occurred and I would like to launch the implementation of fix. Because I can't use the keyboard after 30 seconds it automatically selects that tries to start Windows and then comes up with the fix it box. As he seeks the problem it click on and then stop. I tried a few things I've read these tips like making sure that the fans are running (which they are) and the cleaning of the dust. I could not smell any burned, I opened the tower and see nothing that looks like a short circuit. I removed the power supply and did not note anything inside that looked burnt. The computer is only about a year and clean inside. I tried to plug it into different outlets as well as with the same result. Any help would be greatly appreciated!

  Hello

  You took part the PSU?  These days, it is almost unknown, and it is not recommended.

  Your PC is probably still under warranty, unless you have one of the youngest of the ship is not very likey.

  HP support number is 800-474-6836 or 800-HPINVENT or online here.

• HP pavilion dv7: computer turns off screen

  When I start my laptop after an hour becoming balnk display but the power light turns on, but after some cell time will close. When again I restart from the previous step, during which it will shut down.

  The next thing to try is the following:

  If you have two RAM chips in the system, remove one and try to feed IT.  If he succeeds the first chip of RAM that you removed is bad.

  If not successful, remove the second RAM chip then reinsert the one you deleted.

  It starts now?  If so, the second RAM chip is bad.

  The purpose of this is to try to start with a single chip of RAM at a time.

  I would like to know how it goes...

• Pavilion dv7: laptop turns off after 40 seconds of not being connected.

  I want to take my laptop on the move without worry about finding an outlit every 40 seconds. I looked through the ' power settings and sleep ' but nothing appeals to my problem. I don't know if it's just something that all the HPs do or if I have a problem. Help, please!

  @marissagi

  HP laptops - test and calibrate the battery (Windows 7)

  http://support.HP.com/us-en/document/c00821536

  REO

• Pavilion MC m8430f - turns off after 2 seconds then on tip of 2 dry and resumes the cycle

  I had checked power and it's good.  Also, if I remove the connector with 2 black and 2 yellow wires, power stays on but the computer does not start.

  The computer repair place said it was a bad mother, but I can't see the damage on the motherboard and think it's just a thermal switch on the motherboard which is bad, I could go around.

  Have you ever heard of this problem before and could I verify further?

  Found the problem.

  I took everything out, including the inner workings of power.  The power supply has a fan who was working, however when I pulled the plug and power circuit, it locks so slightly.

  That's all.  Apparently, the greater resistance made circuit think fan was bad and it does not think that the power supply fan is bad, in this case the circuit.

  Good to know for others in the future.  Saved me a lot of money.

  P.S. A computer repair place told me that the motherboard was bad, glad I checked again.

• Ram HP Pavilion Elite m9040n upgrade options

  Hi, my question has to do with what is the best ram to fill my ram slots with. I run windows 7 Ultimate 64 bit and I don't know that I can fit 8 GB total. I'm in recording music with a large number of devices. I have things like a console 003, a 11Rack, a Boss GT - 10, as well as a Piano Yamaha G-1. All are via USB except the 003 (Firewire connection).

  I have a report of sandra to take account of my diet and updates of graphics card.

  Sandra Report!

  SiSoftware Sandra

  Computer

  Model: HP-Pavilion, GN553AA - ABA m9040n

  Working Group: task force

  Host name: Marshall-PC

  User: Marshall

  Processor

  Model: Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz

  Speed: 2.4 GHz

  Cores per processor: 4 unit (s)

  Threads by heart: 1 unit (s)

  Type: Quad-Core

  Built-in data cache: 4 x 32 k, the size of online synchronous, Write-Thru, 8 channels, 64 bytes

  Edge L2 Cache: 2 x 4 MB, ECC, synchronous, ATC, 16 channels, 64 byte line size, 2 son sharing

  Computer

  Motherboard: Asus Berkeley

  BIOS: FRIEND 5.13 24/10/2007

  PCI, ISA use: X - Bus PCIe IMB USB FireWire/1394 i2c/SMBus

  Support multiprocessor (MP): No.

  Advanced multiprocessor PEAK (APIC): Yes

  Total memory: 3GB DDR2 DDR3 DIMM

  Chipset

  Model: HP P35/G33/G31 processor to i/o controller

  The front side Bus speed: 4 x 267 MHz (1 GHz)

  Total memory: 3GB DDR2 DDR3 DIMM

  Channels: 2

  Memory Bus speed: 2 x 334 MHz (668 MHz)

  Bars of memory

  Memory module: Micron 8HTF6464AY - 667 7 512 MB DIMM DDR2 PC2 - 5300U DDR2 - 666 (5-5-5-15 3-20-5-3)

  Memory module: (Hyundai) to Hynix HYMP512U64CP8-Y5 1 GB DIMM DDR2 PC2-5300U DDR2-666 (5-5-5-15 3-20-5-3)

  Memory module: Micron 8HTF6464AY - 667 7 512 MB DIMM DDR2 PC2 - 5300U DDR2 - 666 (5-5-5-15 3-20-5-3)

  Memory module: (Hyundai) to Hynix HYMP512U64CP8-Y5 1 GB DIMM DDR2 PC2-5300U DDR2-666 (5-5-5-15 3-20-5-3)

  Video system

  Video card: NVIDIA GeForce 9800 GTX + (128 SM4.0 1.7 GHz, 512 MB of DDR3 2.2 GHz 256 bit PCIe 16 x 2.00)

  Video card: NVIDIA GeForce 9800 GTX + (128 SM4.0 1.7 GHz, 512 MB of DDR3 2.2 GHz 256 bit PCIe 16 x 2.00)

  Graphics processor

  OpenCL processor: NVIDIA GeForce 9800 GTX + (128SP 16 c 1.84 GHz, 512 MB of DDR3 2.2 GHz 256-bit)

  Compute Shader Processor: NVIDIA GeForce 9800 GTX + (128SP 1.7 GHz, 512 MB of DDR3 2.2 GHz 256-bit)

  Storage devices

  Hitachi HDT725032VLA380 (320 GB, SATA300, 3.5 ", 7200 RPM, 7 MB of Cache memory): 298 GB (C (D)

  Generic-Compact Flash (USB): N/a (H

  Generic-SM/xD-Picture (USB): N/a (I

  Generic-SD/MMC (USB): N/a (J

  Generic-MS/MS-Pro (USB): N/a (K

  TSSTcorp CDDVDW TS-H653N (SATA150, DVD +-RW, CD - RW, 2MB Cache): n/a (E

  Logical storage devices

  SysReserved: 100 MB (NTFS)

  Hard drive (C : 289 GB (NTFS) @ Hitachi HDT725032VLA380 (320 GB, SATA300, 3.5 ", 7200 RPM, 7 MB Cache))

  FACTORY (D : 9 GB (NTFS) @ Hitachi HDT725032VLA380 (320 GB, SATA300, 3.5 ", 7200 RPM, 7 MB Cache))

  Removable disk (H : n/a @ generic-Compact Flash (USB))

  Removable drive (I : n/a @ generic-SM/xD-Picture (USB))

  Removable drive (J : n/a @ generic-SD/MMC (USB))

  Removable disk (K : n/a @ generic-MS/MS-Pro (USB))

  Optical drive (E : n/a @ TSSTcorp CDDVDW TS-H653N (SATA150, DVD +-RW, CD - RW, 2MB Cache))

  Devices

  LPC Hub Controller 1: HP (ICH9) LPC Interface Controller

  LPC Legacy controller 1: Asus F8000

  Audio device: HP (ICH9) HD Audio Controller

  Audio codec: Realtek Semi 888 high definition Audio

  Serial Port (s): 1

  Disk controller: HP (ICH9) 4 port Serial ATA Storage Controller 1

  Disk controller: HP (ICH9) 2 port Serial ATA Storage Controller 2

  USB controller 1: HP (ICH9) USB Universal Host Controller

  USB controller 2: HP (ICH9) USB Universal Host Controller

  USB controller 3: HP (ICH9) USB2 Enhanced Host Controller

  USB controller 4: HP (ICH9) USB Universal Host Controller

  USB controller 5: HP (ICH9) USB Universal Host Controller

  USB controller 6: HP (ICH9) USB Universal Host Controller

  USB controller 7: HP (ICH9) USB Universal Host Controller

  USB controller 8: HP (ICH9) USB2 Enhanced Host Controller

  Controller FireWire/1394 1: HP FW322/323 IEEE1394 OHCI FireWire controller

  SMBus/i2c controller 1: Intel ICH SMBus

  Printers and faxes

  Printer: Microsoft XPS Document Writer (600 x 600, color)

  Fax: Microsoft Shared Fax Driver (200 x 200)

  Printer: Adobe PDF Converter (4000 x 4000, color)

  Devices

  Network services

  Network card: Intel(r) 82566DC-2 Gigabit Network Connection (Ethernet 100 Mbit/s)

  1 wireless adapter: USB wireless 802.11 b/g adapter

  Power management

  (AC) line status: online

  Operating system

  Windows system: Microsoft Windows 7 Ultimate 6.01.7600

  Compliance platform: x 64

  Windows experience index

  Current system: 5.7

  Increasing tips

  Tip of 2546: memory large-capacity Modules must be ECC/parity.

  Tip 2: Double click on advanced or press ENTER, while a tip is selected for more information on the tip.

  Hynix and Micron produce good RAM modules. I suggest that you go for 4X2GB DDR2-800 memory sticks. Here are the specifications of memory supported by the motherboard:

  Dual channel memory architecture
  Four connectors DIMM DDR2 240-pin
  Supported DIMM types:
  DDR2-800
  DDR2-667
  Memory non - ECC, unbuffered
  Supports DIMM DDR2 2 GB modules
  Supports 8 GB on 64-bit PCs
  Supports 4 GB * on 32-bit PCs
  NOTE: * actual available memory may be less

• Laptop turns off continuously.

  Separated from this thread.

  After step 1, if it is persistent, what would I do to keep my laptop running without the automatically stop... should I just turn on my laptop in safe mode? or by other means?

  Hello

  It may be an overheating problem and it is normally the main reason for your problem.

  .

  If it's a hardware problem, it would not not to restart.

  That said, it is possible to have a hairline cracks in the motherboard, etc, which becomes obvious as soon as it warms up

  Check vents for hair, dust, etc. and do not use a laptop when it is based on material surfaces: bedspreads, blankets, etc.

  If the problem persists, because it of a laptop, bring it to a local computer and reliable repair shop and get them to open and clean the dust inside...

  Here is an interesting discussion about the reasons for your problem:

  http://PC-trickandsolution.blogspot.com.au/2011/07/fix-laptop-overheating-shutdown-problem.html

  NB: > however 9 out of 10 cases of overheating are caused by obstruction of the air flow.

  See you soon.

• HP Pavilion Elite m9040n Desktop and Fire Wire 1394

  I have the above mentioned Office. It has a plugin from 1394 to the front of the case. The Pavilion comes with all the software to pull wire work? I backed up my hard drive on a Toshiba external drive with a USB cable, the other day and it took 6 hours. Is not fire wire suppost to transfer data faster than a USB cable? Are there special things I need to know when buying FireWire 1394.

  I was looking on the internet the other day and they showed the son of fire with pins 4 and 6. Looking into the hole on my computer, it only looks like 3 terminals?

  Thank you

  Rick, welcome to the forum.

  There is no necessary software for Firewire (IEEE 1394-a).  The driver is installed with the operating system.

  Here is the page of the following motherboard for the computer.  It only shows that there is a Firewire (IEEE 1394) (# 11) port in return IO ports.

  Here is an article that shows the comparison of speed vs. Firewire USB.  FireWire was developed by Apple.

  I hope this information answers your questions.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• HP Pavilion Elite m9040n Desktop PC card mother Layout

  I have a desktop HP m9040n and was tinkering autour inside. Long story short, I don't remember where the 2 hard drives and the cd player plug on the motherboard. All 3 are sata and can't seem to understand what command and ports as sata cables plug in. If someone could help me out here, it would be greatly appreciated.

  http://support.HP.com/us-en/document/c01077641

  Hello Bostel, when you look at the motherboard in the case, the lower right corner is where the Sata ports.

  The port0 is on the right of the Sata ports closer to the top of the Board of Directors. This is the port where the hard drive0 or hard drive must be connected to.

  The port in front is where I connect the second hard drive and the port under the port1 is where to connect the DVD player.

  It was suggested that the Sata port0 is the boot hard drive port, but I connected the hard disks and DVD drives at all of these ports at one time or another and found no difference in the performance of the system.

  This could make a slight difference if you have the hard drive configured in a Raid array.