HP Pavilion H9-1214: Pavilion H8-1214: graphics card update

Similar Questions

• H8-1214: h8-1214 graphics card update

  My h8-1214 starts to get a little old. The graphics card died a few months back and a friend gave me an old (even lower than the original spec) just to make it back to work again. Not long after the hard drive has failed too so I replaced which and also, I needed to put a new operating system on the drive I upgraded from the original windows 7 to 8.1. The problem is windows 8 don't like the really old graphics card. so I took the plunge one ordered a new one. I also had a new power supply, I have read that the original could not deal with any updates. The problem I have is I got the card is a Radeon R7 250 X http://www.powercolor.com/US/products_features.asp?id=528 doesn't seem to work with the system. Ive put the old back in and that works so I know Ive got all the power supply very well hung upward and that his problem with the card. Ive spent a little time to try to find answers and have read a few things about the compatibility of UEFI, but everything I find seems quite vague and I can't find a clear answer on what is or is not compatible, what can be done about it. Im hoping that someone could help me with, it is if the h8-1214 can use a Radeon R7 250 X? If there is a problem of compatibility UEFI is there something that I can update to make it work as the driver of the motherboard or even a bios update? If it cannot be implemented should I consider getting an old low spec graphics card or should I think about a motherboard more up-to-date, which is consistent with recent material? If this is the best option is it any particular reccomendation for most recent advice that I can put the FX-6100 in?

  Thanks in advance for any help

  Hello

  All Sapphire R7 250 graphics cards that are listed on the Sapphire worksheet indicates that all of these cards are not active UEFI.  You need a power of 500 watts.

• HP Pavilion 500-242ea: graphics card update

  I am an avid player of PC, when I try to play the new games IE cod blackopps 3 sound telling me that I have little memory, I think about buying additional ram, do I have to update my graphics card?

  System Pavilion 500-242ea

  mobo (jasmineR)

  chipset AMD A75 FCH

  MEM 4 x DDR3 Sockets

  a front side bus speed 4-way, 5 GT/s per lane

  processor socket FM2

  Exp 1 of slots pci express x 16 (ben2.0)

  3 PCI Express x 1 (gen 2.0)

  1 half-length mini-map

  Graphics

  235integrated Radeon R5

  AMD radeon 7560D 1440 x 900

  graphic mem 4 181 MB

  In the waiting

  You'll be glad you asked!

  This is your computer .  Power supply is 300W.  PROCESSOR AMD A8-5500.  D 7560 AMD graphics card.

  COD Black Ops must these requirements.   Your CPU meets the corrected value.

  The graphics are a serious difference... the comparison here is.  560ti vs the 760 and both are 170W.

  You will need at least a 500W PSU, but again, I would see that a 600W Corsair associated with a card EVGA.

  Finally, you need 8 GB of memory of motherboard.  Just 6 GB. Not sure about your Setup, because there are 4 locations, and you have 6 GB installed... Run the CPUID CPU-Z to analyze the 4 locations.

• HP Pavilion a320n needs graphics card update.

  I need to update the graphics card for my HP the a320n desktop. I need to know about how to proceed and how much it will cost me... and should I even bother? This old compy me has served well with not a glitch during the last 7 years or so, but now, it is flat refusing to run games like Second Life. It's a Nvidia GeForce 4 MX integrated GPU. Is there a way to improve this?

  Here are some generic instructions:

  http://support.HP.com/us-en/document/c00007413

  ... The choice is yours. You should be able to find much better used or old-stock 8 x AGP card for anywhere from $30 to $150: example... http://www.TigerDirect.com/applications/category/category_slc.asp?CATID=318 & SRCCODE = WEBGOOVID & cm_mmc_o = mH4CjC7BBTkwCjCECjCEL

  Memory must be inexpensive as well and can also help a lot. The thing is, if you think you can buy a new computer from an OEM, like HP, for about the same price... So, I leave to you to determine if XP is more reliable than vista or not. But more new games will be compatible with Vista... (or Win7).

• Pavilion dv6-2155dx: graphics card update

  After taking my laptop in a repair store (to explore a possible faulty HDD), they have installed Windows 7 Ultimate (originally I had window 7 Home Premium 64-bit).

  Now, I'm running in the error messages on the charts during the installation of games or even playing preloaded games like Solitaire - especially on the accelerator and 3D.

  Device Manager says I "Standard VGA adapter".   When I go to the screen resolution > advanced settings, tab troubleshooting shows acceleration to the maximum end of the scale.   Chiptype BTW: Intel Ironlake Mobile 8 8-bit.

  The original sticker on the laptop says that it was preloaded with Intel Graphics Media Accelerator 4500MHD.    When I go to Intel, they have drivers GMA by download, but suggest using pilots of specific manufacturers.  When I check for the drivers to support. HP.com they show two graphic drivers for this laptop, NVIDIA and Intel Graphics Media Accelerator (no series #)

  I downloaded and installed the version of HP Intel GMA.  Upon restarting, I got a black screen of death after Windows Welcome.   I rebooted in Mode safe mode and restored to an earlier point, so I'm back where I started with the Standard VGA adapter.  (actually tried this twice, same results)

  Is the Intel GMA at HP correct it / compatible with the download version?

  Do I need to uninstall the VGA Standard before installing the GMA?

  Also I notice problems with control of the mouse and the slider: he is nervous and seems to be a hair trigger.  Maybe this related to problems of graphics card?

  Any help would be greatly appreciated.

  Hi there @vpbob,

  Thank you for your answer!

  At this point, I would like to start by hardware testing to ensure that the graphics card and the hard drive working properly. If there is no hardware failures than to move on to other steps. If there are questions and missing then it is material that needs to be replaced.

  I look online to see if there was anything I could miss out there on the Internet for troubleshooting. I found a forum on the Microsoft Web site that can some assistance.

  You can try a factory restore partition, but it may not work. The partition is perhaps already damaged because operating systems have already been switched back. You can order the recovery media and use instead.

  Another problem could be that the drivers from the HP website are not installed on your laptop.

  When you go into the Device Manager is there one or two graphics drivers?

  Do you see unknown devices in Device Manager?

  Even if you had taken to repair already and you still experience problems, you can always take the laptop back their and give them all the drivers in the computer correctly for you.

• Pavilion P6-2035uk: graphics card update

  Uprated the power 650w. Bought a graphics (GeForce GTX 960) that simply will not start. I followed all the advice previously given (UEFI/Legacy switch, reset CMOS etc.) but nothing.

  This card is too powerful for the Mo. Should I reduce the upgrade to a 750 GTX?

  Any advice would be apprciated.

  The Sapphire card should have the switch on this subject.

• Pavilion p6-2022uk: graphics card update

  I want to upgrade the graphics on this desktop computer to allow playback of some games.

  Because of the limited space in the PC case an Asus Nvidia Geforce GT740 seemed to be the best choice.

  When mounted, after activating the VGA in the BIOS, everything I get the screen is a screen startup HP saying "press ESC for whole upward.

  There seems to be nothing in the BIOS to change that would allow the operating system to load correctly.

  The PCi Express x 16 slot is enabled.

  Any advice would be welcome.

  Greetings to all who read this.

  Thank you for your answer to my question. It took some time to solve the problem because my PC is a different model from that of the video, but I have now managed using 'Alt + F10'. Once again thank you very much > best regards, David

• HP Pavilion Slimline S5202UK graphics card update

  Hello

  I have a HP S5202UK and upgrade to one card PNY graphic GT210

  The so-called specifications

  A minimum 300W or more power supply (with a minimum of 12V current rating of 18A)

  I only have a 220w PSU, but max power for the card is 30w so I should be fine?

  How can I find out how much my power amps can produce

  Thank you very much, Chris

  Hello

  Look here in HP Partsurfer for video cards that are used in the new Slimline models with a 220 Watt power supply.  These cards have been made specifically for the HP Slimline PC with a 220 watt power supply.

  The NVIDIA GT 520 or 530 are much better video cards from the GeForce 210.  There is no need to change the power supply with the HP NVIDIA GT 520 or 530.

  If you do not want to replace the power supply then look here. HP Slimline power of Athena. There are also mini-ATX converter cable.

• HP Pavilion p7-1534: graphics card update

  Can I put my HP with a ti of Nvidia 750 and 8 GB of ram with 300 watts of power, if not, the power supply can be improved.

  Thank you for your help,

  Andrew

  Andrew, welcome to the forum.

  Here is a video card that works in your computer.  Read the reviews to see what users have to say about it.  While it is said that simply by 300W to work properly, many members have said that you must have at least one power supply 400W (PSU).  Personally, I recommend at least 500W.  This will give you more space to upgrade in the future.  I love the Corsair PSU.

  I recommend contacting Technical Support EVGA to ensure it works before buying another card or it.  They were extremely useful for me and other members.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not!

  I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not! I also uninstalled and Reinstalled but I don't think that worked.

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)
  Mini092911 - 02.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 116
  BCP1: 9CEE7510
  BCP2: CA 8, 16700
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: ce621e4c-18c8-469e-8f97-42590f35c1d9

  AND:

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)
  WD-20110929-1029 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 117
  BCP1: 9CEE7510
  BCP2: CA 8, 16700
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: a59df662-85fc-45dd-a4b0-537bf6e212b3

  Hello

  Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) if the video device
  is integrated on the motherboard. Also check with Nvidia Support, their drivers and documentation online
  and ask in their forums known issues.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  -------------------------------------------------------------

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
  to reset the display driver and recover a time-out has failed.

  BCCode: 116 0 x 00000116<-- read="" this="" link="" read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  ----------------

  BCCode: 117 0 x 00000117

  Bug VIDEO_TDR_TIMEOUT_DETECTED control has a value of 0 x 00000117. This indicates that the display driver failed in a timely fashion.

  BCCode: 117 0 x 00000117<-- read="" this="">
  * 1276.html http://www.faultwire.com/solutions-fatal_error/the-Display-Driver-failed-to-Respond-in-timely-Fashion-0x00000117-

  1. update the video driver - also look for the BIOS and chipset of low level drivers at the manufacturer of system
  of (card mother manufacturer custom systems). Check with Nvidia Support and forums.

  2 are looking for Virus/Malware.

  3 check the hard disk for errors - run Checkdisk (see below)

  --------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all the)
  possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• JPEG and RAW is more displayed on my screen. even after the graphics card update

  JPEG and RAW is more displayed on my screen. even after the graphics card update

  Click on edit and click Preferences, and then choose the last option which is camera raw.

  on the camera raw preferences, in the lower window, uncheck the box use Gpu option and then restart Photoshop and try again

• H8-1214 graphics card upgrade problem

  I have Pavilion h8-1214 and problems for the upgrade of the GPU.  I first tried an EVGA 750-ti, who could start on the HP splash screen, and then go no black and go further.  After a bios update and communicating with EVGA, said that the card would not work just not in this model and it was a known issue with EVGA.  I have since bought a MSI radeon r9 270 x and this map does not work either.  My computer turns on, everything seems to work, but nothing will happen on the screen.

  My question is this: I'm going to be able to use a newer GPU model in this machine, or should I look at something a little less powerful?  If the latter, any suggestions?

  Alrin, welcome to the forum.

  Most recent most of video cards requires UEFI firmware in the motherboard instead of the standard BIOS.  HP didn't start to fully use UEFI firmware until mid-October 2012.

  EVGA cards before the GTX 650 should work with your computer.

  Graphics card XFX with n beginning with '0' serial don't require UEFI firmware.  After 2013 these beginning of series # 1 to 8 need.

  MSI could not give me that information.  They have simply said that if the customer has a problem to call them to the 1-626-271-1004.  My suggestion is, if you find a card MSI, you want to buy, call them first.  They should be able to help you.

  My advice is to call the Technical Support from the manufacturer before buying any video card.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Pavilion h8 - 1260t: graphics card does not work.

  I just bought a Zotac Gtx 750 ti graphic card, but when I tried to install it in my HP Pavilion h8 - 1260t, its beeps six times and displays the hp screen then it starts. My computer's power supply is rated at 460 watts and the card requires 400. The card says it takes 12V 20A, but food does provide that 15A 12V. Do I need to get a new power supply? Or did I make a mistake and buy a card that is not compatible with my system. In addition, if the card is not compatible, how can I make sure the next card, I have to buy is compatible?

  First, I blocked your other post so that confusion does not prevail.

  Your original operating system was WIN 7 to January 2012. The BIOS is:

• HP pavilion slimline s3632me graphic card problem

  It's my computer: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01552288 & lang = to & cc = us & conte...

  my graphics card has a fan that is not working, and I don't get any signal on my monitor after 20 minutes of start... so I decided to get a new graphics card which is better.

  so I want to know what is the max graphics card that I can put in this computer and should I go for the same type (AC express graphics card) or get any type that can work with the computer?

  Here are the specifications of your HP Pavilion Slimline s3632me desktop computer and its card mother M2N61-AR (Acacia). Based on the specifications, this model has a power of 160 watts, a graphics card NVIDIA GeForce 9500 GS PCIe x 16 HDMI and DVI - I outputs and integrated nVidia GeForce 6150SE graphics with a VGA output. Note that the discreet graphics card and the built-in graphics card is not usable at the same time.

  You need to replace the graphics card NVIDIA GeForce 9500 GS PCIe x 16 with a x 16 low profile PCIe graphics card (the card must have a power system recommend assessment of 160 watts or less). All purchased card that has a higher recommended system power supply requirement will require the purchase of a new power supply, follow the recommendations in cards. Your computer's power supply is not a standard ATX power supply and can be difficult to find.

  Please send Bravo

• HP Pavilion P6-2065UK graphics card problems

  Hello

  Have HP Pavilion P6-2065UK, with 8 GB of Ram and have installed the new power supply Corsair CX430 Watt.

  When I install the new graphics card Nvidia Geforce GT 630, blank screen appears, you can hear Windows 7 startup screen open, but not the current view.

  I spent in mode Bios to confirm the x 16 slot is enabled and that sometimes the PCI Express card is shown. I tried enabling and disabling onboard video in Bios, no joy. Cannot go to Safe Mode.

  I also tried to use Google Remote Desktop connect the HP device to another PC so that I can try and see office, but as soon as you turn off the power, the unique necessary 12-digit PIN is reset to zero and I lose the connection.

  I am still able to use the onboard video of origin but not the Nvidia card.

  Been going on for a while now.

  Any help with this would be really appreciated.

  Thank you.

  Hello Easyd,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you have installed a new graphics card and now will not start. I would like that you go back into your BIOS and disable Secure Boot and turn the traditional Mode.

  Please re-post with what happens when you reboot if you need extra support. Thanks for posting on the HP Forums. Have a great weekend!