HP Pavilion having problems connecting to the TV

Similar Questions

• Did someone having problems connecting to the functionality of adobe currently shipping?

  Did someone having problems connecting to the functionality of adobe currently shipping?

  Finally got the link: https://cloud.acrobat.com/send

• Dell Inspiron 15 is having problems connecting to the internet?

  Hello

  I had a problem with my Dell Inspiron 15, wireless connection to the internet for some time now. Almost daily, some time ago when I can't connect to the internet, no matter how many times I try to connect, and if I do connect, it remains only connected for a minute or two, and then I'm back to the tent to connect several times. I know it is not my router or my modem, because none of the other computers or devices in my House have the same problem. I'm the only one with these connectivity issues. I reset my router and modem regularly, thinking this may help, but it doesn't. I changed the channel on my router and which has in fact nothing, either.

  For any help or suggestion would be appreciated!

  Thank you!

  jkrawcke224,

  Start, Control Panel, device, network, Dell Wireless 1397 WLAN Mini Card Manager, advanced. Looking for antenna diversity. Change car for auxiliary voltage

  Rick

  Name of the operating system: Microsoft Windows 7 Home Premium
  OS version: 6.1.7601 Service Pack 1 Build 7601
  OS manufacturer: Microsoft Corporation
  Original installation date: 25/06/2010, 20:07:26
  Starting system: 29/12/2011, 09:27:28
  System manufacturer: Dell Inc..
  System model: Inspiron 1564
  Type of system: PC x 64
  Processor (s): 1 processor installed.
  [01]: Intel64 family 6 model 37 Stepping 2 GenuineInt
  El ~ 917 Mhz
  BIOS version: Dell Inc. A13, 29/03/2011
  Local system: en - us; English (United States)
  Input locale: en - us; English (United States)
  Time zone: (UTC-05:00) Eastern (U.S. & Canada)
  Network adapters: 3 interconnect installed.
  [01]: Dell Wireless 1397 WLAN Mini Card
  Name of the connection: wireless network connection
  DHCP enabled: Yes
  DHCP server: 192.168.0.1
  IP addresses
  [01]: 192.168.0.101
  [02]: fe80::28ed:4235:3 4 c: 2e5c
  [02]: Realtek PCIe FE Family Controller
  Name of the connection: connection to the Local network
  Status: Media disconnected
  [03]: Microsoft Virtual WiFi Miniport adapt
  Name of the connection: wireless network connection
  Status: Media disconnected

• Photo software is slow and having problems connecting to the internet.

  I installed photo software to my laptaop and it was running real slow try to connect to the internet and navigation. So I uninstalled it and it is still going real slow. I had a virus and spyware check check all that seems very well so I don't know what I did, but can someone help me? I don't have the money to have someone fix the so I will try my other options first. Thank you, Jamie

  original title: laptop slow

  Hello

  Method 1:
  Visit the provided link and run the troubleshooter.
  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter
  Method 2:
  You can optimize the performance of Windows, try the methods mentioned in the article by visiting the link:
  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance
  Method 3:
  You can run Microsoft Safety Scanner, check the link:
  Microsoft safety scanner.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  You can also run the malicious software removal tool. Check out the link:
  http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx
  Note: as precautionary measure, backup important data on your computer before running the analysis.

  Method 4:

  Step 1:

  Start the computer in safe mode and check if the problem occurs. Check out the link and follow the steps.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  If the computer works fine in the safe mode, being in Safe Mode, perform a clean boot, and then restart the computer and check. Visit the link and follow the steps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once the diagnosis is made, check that you follow step 7 of the article to set the computer to boot to the Normal startup.

• Having problems connecting to the Internet

  Hello, one and all!

  So, as of late I had problems connecting to Internet.  I can connect to the connection itself very well, although it shows as "Limited".  The thing that bothers me the most is that this problem is intermittent: some days, it appears, some days I have no problem with the connection to the Internet.
  I have tried all the following:
  -Reset the wireless network adapter
  -Contact network administrator (the link in question is a WiFi connection library; I'm the only one to have this problem, is not the connection itself)
  -Enabled Windows Update for updates and install them
  -Reset my computer
  At one point, I was getting an error message that says "Windows cannot communicate with the device or resource (primary DNS server).  I took measures to fix that (checked the option 'DNS server automatically get an address' under the screen properties V.4 IP (TCP/IPv4)), and now it's just going back to tell me that the error is with the network (which is not the case) or the wireless adapter (which I find more likely).
  I was wondering if anyone had any advice.  I have not yet checked to see if my computer can connect to the Internet via another connection, but I imagine that if it is a wireless network card problem, I have this same problem also.
  My computer is an HP laptop that I bought in January 2013, and it came with Windows 8 is installed.  I had previous problems with the Internet, but in the end, these problems have been resolved with a driver update through Windows Update.  There is no such update now, however.
  EDIT: I just tried another diagnosis with the troubleshooting tool, and it gives me the "Windows cannot communicate with the device or resource (primary DNS server)' once more.  I still have the "DNS server automatically get an address" option checked.

  Hi Jason,

  This problem can occur because of corrupted network, TCP\IP drivers, or due to the damaged network card.

  Method 1:
  I suggest you to check if the problem occurs with a connection cable or not.

  Method 2:

  If the problem persists, I suggest you install the latest network driver on the manufacturer's Web site and check if it helps.

  The link: http://WWW8.HP.com/us/en/support.html 

  Method 3:

  If the problem persists, I suggest you to reset TCP/IP and check if it helps.

  a. press the Windows key + X, select prompt (Admin) and on ENTER.

  b. at the command prompt, type the following command, and then press on ENTRY:

  netsh int ip reset c:\resetlog.txt

  Note: If you do not specify a path of the directory for the log file, use the following command:

  netsh int ip reset resetlog.txt

  c. restart the computer.

  See the links for more information.

  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• has anyone used gandi as a ftp host to launch the site of muse? I'm having problems connecting to the ftp server...

  I use gandi as my webhost, but unable to connect to their server ftp to launch my site... any who use before Gandy & have problems/suggestions for me to go on the launch? Maybe, I need to sign up for their package "basic accommodation", but thought before diving into this process, I would like to check if anyone has a similar experience... Thank you!

  Hello

  According to the details provided by you I guess you bought the domain at Gandi, but you want to host on Business Catalyst.

  In my view, that the field is thehivestud.io.

  And you have set incorrect NS records at the end of the Registrar as below:

  LV 1: ns3.worldsecuresystems.com - 54.252.148.151

  LV 2: ns2.worldsecuresystems.com - 54.246.209.121

  LV 3: ns1.worldsecuresystems.com - 54.236.190.129

  They must be as follows:

  LV 1: ns3.worldsecuresystems.com

  LV 2: ns2.worldsecuresystems.com

  LV 3: ns1.worldsecuresystems.com

  Properly update the Registrar of domain and you will be ready.

  Concerning

  Vivek

• Having problems connecting to the different versions of sql - VM?

  I'm a little rusty.  It's been about 5 years since I did my last CF site, used since.  So now I'm trying to get a dev server configuration again and do in VirtualBox.  I installed and tried CF7 and SQL 2000, CF 9 and SQL Express 2005 and 2008 and still get an error when you try to configure a data source CF.  I read on the realization that the IP and port 1433 is on issue and SQL 2000, it does not appear to be activated automatically.  I installed SQL in the mixed mode authentication but me made mistakes by trying to use the connection his I have install when installing SQL.

  Is there a problem with setting up a Windows Server 2003 or 2008 trial edition with SQL 2000/2008 and CF 7/8/9 in a virtual machine?  I should just use and old P4 machine I have available?

  If this is not the case, how/where can I get help to get this small but important problem solved?  Is there an etc video, tutorial,. ?  Looks like there are a lot of similar positions at this topic.  I cut and paste error here if anyone can help.

  Thank you.

  * use mixed mode authentication

  * Make sure that the user has appropriate permissions to DB objects to what he will need to access

  * is that make sure that TCP/IP is enabled in the network configuration

  * Make sure that the port on which it is listening.  From memory, there is a port/IP for each logic card Ref and one for the entire batch (or something like that... it's been awhile).  Make sure they are well positioned.  The dev, I just put it to the entire batch (not knowing any better, and "how it works").  It's the only step never caused me problems... just because I wasn't paying attention to the user interface correctly.

  You can tell us pls:

  (a) the settings that you use for the DSN (except the password);

  (b) the equivalent settings on the DB itself

  Can you telnet to the port/address DB to look, from the CF Server?

  --

  Adam

• having problems connecting to the internet through wireless 8.

  until the end of last month, I was able to connect through routers. but in mid-February routers have stopped working. so far, I have lived two different manufactuers of routers. Linksys e1000 and the netgear n3500l. When I run the windows of its saying network diagnostics, I have a server dns error. even when I run the diagnosis that physically connect to a modem while. internet im running via dhcp. I don't know what else to say to you guys while I get a dns error of connection through these two connection methods.

  Hey Geraldoxereok,

  Try to contact your ISP (ISP) to make sure that your router/network is configured correctly to receive the DNS they provide.

  Hope that helps, I look forward to hearing from you.

• DeskJet 3051 has - having problems connecting to the network of Verizon MiFi

  I have a wireless Deskjet 3051 a home printer. I use it with a Macbook Air. Our wireless network has changed, and I need to connect the printer to the new network, which is a Verizon MiFi network. Is there a way to do this? I tried to restart the printer, nothing helps. When I try to install the software from the installation CD supplied with your printer, it is said that the operating system I use is not supported by the software. Help me, please!

  Hello

  If you have already installed the software of HP full feature temporary connect the printer using USB, go to Applications > Hewlett-Packard > peripheral utilities and follow the HP Installation Wizard, you will be provided with an option to connect the printer to your network.

  If there is no Hewlett-Packard folder under applications do not connect the printer using USB, download and install the software below. Be sure to select the HP recommended software and you will be provided with the option to set up the connection Wireless during installation:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107372-1&cc=us&DLC=en&LC=en&OS=219&product=5117616&sw_lang=

  Shlomi

• Laptop started having problems connecting to internet connections Wi - Fi

  in recent weeks my laptop new (6 months) started having problems connecting to wireless devices after spending hours ranging from hollow forums, check the settings in device etc, computer managers them laptop turns off, restarts said there was a problem that caused the laptop to the stop and then when it restarts it connects to the wireless device fine. If I stop back on the laptop, the problem when I turn it on.

  Not only it will pick up my wireless network, it says no wireless networks found despite her grateful normally about 15 other wireless connections, that my neighbors.

  Does anyone have a solution in the long term to this problem. I am a student and spent more than 3 hours trying to fix today and I don't have the time to deal with this all day.

  Thanks in advance

  > in the last few weeks my laptop new (6 months) started having problems connecting to wireless devices
  Have you changed some settings or perhaps updated driver WLAN? I mean, I can't imagine that problems start without reason.
  It is not easy to say what may be the problem. Perhaps, you must reinstall the recovery image and test the feature with the factory settings.

• "Problem connecting to the Server Web Services." - HP Envy 100

  Hello world

  I wonder if anyone has the same problem as me. I just got a HP Envy 100 and went through the process of setting up without problem. The printer is connected via Wi - Fi for wireless network, I can ping the printer from my Mac successfully and I can print within the network without problem.

  However, regarding ePrint and Web features, it seems that nothing really works. I can't even turn on Web services, I always get the message "problem connecting to the Web Services server.

  I tried the following:

  -Restart the router and printer

  -Change the manual IP address and manually set the DNS server

  -Reapply automatic IP and set the Google DNS (8.8.8.8 and 8.8.4.4) servers

  .. .with no chance whatsoever. If this is a problem with the firmware (from what I understood, I do not have the latest firmware, but I can't ask her update, because it requires, you guessed it, a connection on the server of web services, that is the whole of the problem.)

  Anyone else having the problem? Everyone had it and fixed it? Is this just a temporary problem with HP servers?

  Thanks in advance!

  Hey, for me it works as well, and I didn't, just retried that I had tried before and it connected to the Web Services without problem.

  So I think it's safe to say that the original problem in this topic only lied to a HP Server-side problem. Not cool it took so long for them to solve and in particular the fact that we did not really have feedback appropriate about the problem.

  Anyway, I solved (for now, at least).

• Problem connecting to the server

  Whenever I open the pictures, I get an alert that reads: 'there was a problem connecting to the server "my-server", which is another Mac on my network.

  If I close the dialogue box, Photos keeps trying to connect and it appears again a few seconds later.

  Does anyone have an idea as Photos is all this and how I can stop doing?

  No idea - don't forget we can not see you if you have details

  We do not yet have an idea what software you use or you use 'MyServer' for

  What are the versions of the operating system and Photos do you use? What is your server? How are you connected to it?

  LN

• Problem connecting to the server after moving

  Hi, I keep getting the message "there is a problem connecting to the server"192.168.0.19"etc. This happened after I moved. New ISP, new router. I have an Airport Express and a NAS connected to it. Time Machine and Icloud on the NAS. I think that the NAS has this IP address before moving. There are now 192.168.10.176. Everything works, but I get the pop up frequently.

  I look at the accounts and start but nothing. I reboot safe mode does not remove the problem. So, what can I do?

  I'm on Yosemite with MBR.

  Can you connect using the new IP address?

• There was a problem connecting to the server 'SERVER NAME' error guard appearing

  There was a problem connecting to the server 'SERVER NAME' error guard appearing even though the server is not on my current network.  I recently moved my iMac to a different location and a different network, and now he constantly tries to connect to the old server.  This message appears every 30 seconds and several of those who appear (see pictures) it's extremely frustrating because it makes the machine almost useless because I am constantly closing them.  No matter how many times I try to stop the activity monitor it it keeps reappearing, and I even tried a few terminal commands that I found online, then restarted the computer, but still had no success.  I would appreciate all the advice really.

  I hope that gives you an idea of what I got!

• Check error: there was a problem connecting to the server Apple ID

  When I try to connect to my iTunes on my Windows laptop account it is said there is a problem connecting to the Apple ID server. This problem did not begin until 2 days. I have the latest version of iTunes and Windows.

  What is the number of the version of iTunes?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  Start by missing error MSI.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Leave a post by: turingtest2

  On the PC, when connecting each device, it loads a separate driver. You can try this trick when you want to get iTunes recognizes the iPhone 6. Thanks to the user of the CSA turingtest2 for the tip.

  Try the following:

  Open Control Panel > Device Manager

  Plug in your device

  Locate Bus USB Controllers > Apple Mobile Device USB Driver.
  It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.

  Right-click and select software update of the driver...

  Click Browse my computer for driver software

  Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
  C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers

  Click on let me pick from a list of drivers for devices on my computer

  Click on Apple Mobile Device USB Driver

  Click Next, then close and exit the Device Manager

  Leave a post by: ChrisJ4203