HP Pavilion p6-2310: update of the map Ghaphic
HP Pavilion p6-2310
Motherboard: AAHD2HY (Holly2)
Processor: AMD 3420
Speed: up to 2.8 Ghz
Number of cores: 2
1 PCI Express x 16 (Gen 2.0)
Memory: 8 GB (DDR3-1600)
Power supply: 500Watts
-------------------------------------------------------------------------------------------
QUESTION: I want to connect 2 two LCD monitors to my PC
... I am trying to improve my graphics card to my integrated AMD Radeon HD 6410 D to an ASUS HD 6450, 1 GB memory DDR3 (https://www.asus.com/Graphics-Cards/EAH6450_SILENTDI1GD3LP/) and so far I've failed!
Whenever I have install the card and turn on the PC it is a few beeps and the led turns orange PC and after that, nothing happens! When in normal times, the graphics card should replace the on-board!
Now, I did a search on: (http://www.pc-specs.com/mobo/Pegatron_Corporation/Pegatron_AAHD2-HY _ (Holly) / 1169/Compatible_GPUs) and the graphics card is supposted to be perfectly compatible! Now, I want to just connect two LCD monitors and do not make video games!
On the motherboard there is not to remove jumpers!
should I disable the software graphics card and if it if yes how.
Hello
Your could try the following HP display information when you test the 6450 and see if it solves your problem.
HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card
Check the information of INFOR32 once more. If your PC is running in UEFI mode so no graphics card EVGA NVIDIA GTX 7xxshould work. Choose the one that meets your requirements of video output, corresponds with the 300 Watt power supply in your PC and meets your pocket book.
Thanks for posting on the forum.
Tags: HP Desktops
Similar Questions
-
HP pavilion p6 2310: upgrade of the power supply
I was wondering if this diet will enter my pc hp pavilion p6 2310
http://www.NCIX.com/detail/EVGA-500W-80-plus-certified-5F-92643-1563.htm
Power supply I want
Hello
The standard ATX HP power measured 5.9 by 3.4 by 5.5. As posted by your link shows a good fit.
An examination revealed a problem of quality control but the other customers looked good.
-
Pavilion P7 - 1050t: update on the Best video card
Hello, I upgraded my Pavilion P7 - 1050t a G620 processor i7 - 2600S with 8 GB of ram. Then, I want to upgrade to a dedicated video card and a new PSU. The State plug a PCIe x 16 expansion slot does not 2.0 or 3.0. I want to make sure that I get the best card I can get maximum use of. Any suggestions?
Cgrech79, welcome to the forum.
New video cards require the UEFI in the motherboard instead of a standard BIOS / Legacy. HP didn't start using UEFI until mid - October, 2012. Your motherboard may not be upgraded in the UEFI. The last video cards that does not need UEFI were 640 gt. The PCI Express slot is 1.0 unless it is specified otherwise. The version 2.0 and 3.0 are backward compatible.
I suggest that you determine the video card from the manufacturer that you want to buy and contact their Technical Support to help you choose the best card for your motherboard.
You need to upgrade the power supply (PSU), also. The current PSU is 250W. Most newer cards require at least 400W to work properly. I love Corsair products. I recommend that you buy a power supply at least 500W.
Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.
-
Pavilion g6: no update of the download links for Windows 7 Home premium 64-bit?
I have a pavilion g6 and my hard drive has been corrupted. I had windows 7 Home premium 64-bit preinstalled, but could not find a new download links for the ISO, as they have all been removed. Anyone know where I can download the ISO?
I have not personally used these links, but the answers he is other people are positive:
-
Hello. Many games always tell me that I have the graphics drivers not updated.
Playing Overwatch, I uninstalled and automatically updated graphics drivers. But looking at the site (site for my computer laptop support technique hp) they are still not updated and there are 5 drivers choice. How should know which I expect?
Now, pilots have version 8.810.4.1000, but I guess I probably want the Rev 8.830.6.2000. or the 8.882.2.3000.
If anyone can help?
Specifics:
I have laptop HP Pavilion dv7-6080el Entertainment
switchable graphics with Radeon (TM) HD 6490 M graphics Mobile Intel (r) HD
the dxdiag gives this
If someone could help it will be greatly appreciated!
The driver you want for graphics switchable win764bit is indeed the 8.15.10.2476 8.882.2.3000.The is wrongly declared
for switchable graphics, it's for laptops that have only the map intel.
-
Question the p7 - 1207c HP Pavilion graphics card update
Hi, I currently own a HP Pavilion p7 - 1207c and I play NBA 2 K 15 on settings at 1600 x 900 in low and medium perhaps only 25 30 if I have the chance. The map I intend upgrading to is the GT 630 or 730 WG. My question is if my motherboard supports one of these cards and I see an increase in the rate of display in 2K 15? I have tried to find an update of the BIOS on my HP computer page, couldn't find. I was just wondering if the 730 GT would be compatible with my PC.
Thank you!
GarrickLee, welcome to the forum.
There is no update of the BIOS of the computer. HP expand them once the computer is more than a year.
Yes, the GT 730 is compatible with your motherboard. However, I can't tell you for certain if she will provide more FPS.
Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.
-
cannot update my graphic map of 6770 m on my computer hp pavilion dv6 laptop.
cannot update my graphic map of 6770 m on my computer hp pavilion dv6 laptop.
Hello
You need to download the driver from HP (x). It will not work if the downloaded file has been otherwise.
Good luck.
-
Hey, I have an Iphone 6 s(16GB) in which the maps does not show me the nerby location; For example. (If I find CCD in my area it will show the CCD in the my location (in India) otherwise, it will show the CCD everywhere in the world) I thought it could get better in the next software update, but not had until now. Apple needs to improve maps. Otherwise, please send me the solution for the problem.
Software I use: I am currently using IOS 9.3.4.
Aditya.Bobde wrote:
Hey, I have an Iphone 6 s(16GB) in which the maps does not show me the nerby location; For example. (If I find CCD in my area it will show the CCD in the my location (in India) otherwise, it will show the CCD everywhere in the world) I thought it could get better in the next software update, but not had until now. Apple needs to improve maps. Otherwise, please send me the solution for the problem.
Software I use: I am currently using IOS 9.3.4.
-
When we try to open Google Maps with Firefox, it blocks our browser. Please close and try again. Problem started after we updated our Firefox. Working with Windows 7.
Please upgrade to the latest version of Firefox:
And please:
-
Hello
I have a HP Pavilion dv4-1120br, I know that this model of HP laptop is old, but I instaled the 64 bit of Windows 10 on my machine and saw that my BIOS is version F.30 and the last of them available on the site of HP F.66 has.
The problem is that this model is not suport for Windows 10 because, as I said, is too old. Can I download and run the update of the BIOS for Windows 7 64-bit available in the Web site, or I need to downgrade my OS to Windows 7, update the BIOS and then pass it back to Windows 10?
Thanks for the help!
Hello;
Let me welcome you on the HP forums!
Your second proposal is correct - as the updates to the BIOS on the HP site are specific to the OS version and if you try to run one for Win7 in Win10, it will refuse to run.Good luck
-
The HP Pavilion a6560z bios update
I have a HP Pavilion a6560z. Product #: KZ851AV
I tried to upgrade the processor of double base installed to a phenom x 4 9550, that my research shows is compatible as long as I have updated the bios. I am currently running bios version 5.14 20/06/2008. My problem is the OS original on this PC is Vista, I erased this OS and now run Win 7. I found an update of bios, version 5.49 but she said do not be there except if Vista is installed. Will install this bios brick Council since its desingned for vista?
I can't enter the bios with the 9550 installed but it does not start in windows. The bios shows that it is a blah blah Phenom quad core, so at least he acknowledges that, but when I try to load windows it says "the file is maybe damaged. The file header checksum does not match the checksum calculated. "I read that had a memory problem and tried 8 different sticks, all with the same result, so I thought it was a bios problem. Anyway, any help on a version of bios, I can try without bricking advice would be greatly appreciated. Even if its for Vista that I am always willing to try. This pc is not much of value. Thank you.
You are welcome.
oldhppos wrote:
Thanks for the quick response. Last question, if I could somehow reinstall Vista (system recovery is not an option) and then perform the bios update I was able to install windows 7 and then continue with the new (er) cpu?
I checked the page download software & driver of the computer for an update of the BIOS for Vista and Vista 64-bit. It seems not to be available. You cannot use a retail BIOS update. Where did you find a BIOS update?
-
HP PAVILION 1015TX M6: failure of the BIOS update F.26 F.27
My machine was originally Windows 7 Home Premium, and then when Windows 8 came out, I bought a license for Pro 8.1. Updated the FW since then to F.26A and no problems at all.
Now Windows 10 was released, updated for the new OS, put an SSD to give more subsidy, adding memory and 16 GB is now running on a Micron 256SSD.
Recently, Windows 1607 came out, I got the update and noticed that my internal webcam does not work. I thought about updating everything I can find and saw a new firmware version F.27. Downloaded, run the executable file, looks very promising and then restart that he arrested! If there was a way to do it using a USB via Windows executable, I can do it but it's too late.
Can you please help me restore / recover my BIOS of laptop computers? Now if I turn on my laptop, the screen is blank and I cannot see that the WiFi led is lit in orange. I tried windows + B key too and if I do that I can see the caps lock flashes two times goes off, Wifi led remains lit in orange, then after a few seconds caps lock flashes again. I am so desperate to fix this again and I don't want to throw it.
Can someone in the HP please help or anyone who has the experience to restore / recover my BIOS?
I downloaded sp77669.exe and sp66782.exe, followed steps http://support.hp.com/nz-en/document/c02693833 but it does not give me the next step to extract it on USB, it just runs and tries to attempt to run the executable insyde. Of course it will fail because I use a HP device just for this previous bios on a USB key. Step in here is misleading in some way, because I don't get the option to create the usb bios recovery. I tried to use 7zip to open the executable file and I can find all the files Roma or bin inside.
I fixed it now! hoooooray!
Here are the steps so I did... and then summarize
(1) removed the CMOS battery for a day (24 h), battery not attached either.
2A) set the CMOS battery
2 (b) connected AC, you press the Windows key + B, then held the power button for 3-4 seconds and then release
(3) did not work
(4) tried again, repeated step 2, still nothing
I went desperate... you need a HP HDD to another machine that still have the recovery partition.
(5) power removed, removed my SSD drive temporarily took my netbook HP HARD drive and put it on my computer pavilion laptop of m6.
(6) repeat step 2
(7) not working, lock shift always blink and light up orange Wifi signal
(8) turned off, which held the power button for 30secs or more
(9) repeated a step 2 again and viola, the LCD turns on again, then I got an invalid checksum error CMOS and says it will reset the bios Setup with its previous version and I saw it from 0 to 100%. I don't have what it does in time so I let him finish and it restarts and started access my OS HARD drive, of course I don't want to start from it, so I just shot it extinguished/turned on and tested so it will try to start now and he did.
(10) off, place my SSD back and restarted
(11) happy again...
Just so to be sure it it will always start upward and to confirm what version of bios, ive got, I stopped him again.
Check the bIOS version and I got the latest bios version f.27 LMAO! This thing happened to step 9 0-100% must be a continuation of the update stopped. It didn't reset it instead it just finished off the coast of the update. isn't that great! Perhaps maybe this a defect on the update of hp in the process. (With 1) win10 OS and 2) an SSD is maybe a problem with the update process if you do the OS, I'm just speculating. The operating system that is supported on the site isn't until Win8, although technically, they are the same win8 family and 10 but who knows. I suggest if you got the same setup as mine, do the update regardless of the OS, start from a USB Pendrive and up-to-date in this way if you'll be lucky to find a bootable version.
-
After an automatic update of the HP BIOS a few minutes ago, the speakers and the microphone does not work
No error messages at all
System controls function without problems
My laptop is a g6-1b79dx Pavilion
OS: Windows 7 Home Premium
Any help will be appreciated
Thank you
Ernesto
Thanks for the reply
I'm not using any HDMI component connected to the computer
What I did to install a version of the BIOS previuos published 2011-05-27
Here is the link where I downloaded it.
After I reinstalled the BIOS, I wound up off the PC, and now the speakers and the microphone are ok
Thanks for your help
Ernesto
-
Update the maps does not work after 10.3.2.440 blackBerry 10
My Z10 has recently been updated with ATT 10.3.2.440. Since the update, "Maps" do not work properly. The opening, I see the map, with my current position, but I'm unable to find anything or to plan directions. The application displays "content is not available. The content of my site is currently unavailable. »
I tried to reset the device using the volume keys, but no improvement with this problem.
Thanks for any help / advice.
Well D
Hello
BB today released a new version of MAPS... I suggest get via BBWorld and then try again.
Good luck and let us know!
-
I have a HP Pavilion dv6 notebook PC (product number: XZ082UA #ABA) running Windows 7 Home Premium 64-bit. I was installing the updates through the HP Support Assistant and a message appeared on the screen saying that it was "flashing" system and that the keyboard and the touchpad work not for the next minute or so, but the message box has some points of grammar that just made me a bit paranoid that it wasn't true... "The touchpad, keyboard would be no function during the flash process". My laptop has been really hard and as a windows command prompt were popping up then open Windows Installer. I don't know, I could just be acting paranoid for no reason, this is my first time installation updates through this program, so I don't know if this is normal... Just be careful because an error message containing a bad computer destroyed English of my brother... So I was wondering if it is normal that the update process.
Hello Skunk,
If the update takes place through the Support Assistant, you are fine. "Flashing" is the correct term for this type of update. It is always better to prevent than cure.
Good luck!
Maybe you are looking for
-
SA60: What really causes the constant overheating problem?
We purchased 2 Toshiba Satellite about 16 months ago. Both started to feel constantly overheating ensure downs after about 1 year use. Both have been cleaned professionally. A SA60-106 was a BIOS update that has well except the fan runs continuously
-
mouse for Pavilion dv1000 drivers
I have an old laptop Pavillion dv1000 with OS XP Professional. The operating system on the bottom is XP Home Edition. I don't know who installed the professional edition, but I can't install a driver for a PS/2 mouse. Can someone help me please! This
-
Hi, come the E15 Aspire. Which cable HDMI should I expect?
Hi can someone Advisor, which HDMI cable, I should get, in order to connect to my TV. ?
-
My computer automatically did an update of Sam and immediately after it rebooted I received the message "the service user profile Service failed the log on.» User profile cannot be loaded. I am now in safe mode to try to figure out what to do if I
-
Click with the right button on dialog question
When you right click on a file, you see a dialog box that contains the things that you can do with it. Back at the turn of the century when we had win 98 and XP, these dialog boxes have been stored on the computer and you can rearrange or delete the