HP Photosmart B209a-m 2 wireless

Similar Questions

• WPS connection for hp photosmart B209a more

  yesterday, I downloaded the printer driver to my laptop to make impression on our 2nd printer: hp photosmart b209a more.  my laptop is wireless. Our 2nd computer impressions on the photosmart wireless, but the #2 computer is connected to the internet.  I remember now that the technology said that there no photosmart Island connected from my portable office.

  When I use the printer setup menu it just look for connection wps and then message "wps has expired". do you have suggestions on what to try?

  Your router has WPS.  It is the button on the top forward.

  WPS (push-button) on the printer, then breast push 2 minutes the Start button on the front of the router.

• '0xc19a0042, ink system failure' on HP Photosmart B209a-m

  Printer: HP Photosmart B209a-m

  Computer: HP Vista

  I followed all the directions for turning printer works; turn off, unplug, plug in the unit, then by restarting. Restarted the computer. Always got message for ink system failure. What to do next?

  Thank you!

  For the failures of the system of ink and 0 x type codes, please see the document located here.

  Hope this helps, Taffycat.

• How change HP Photosmart B209a default scanning, such as changing .jpg at the exit of the .png file?

  Since upgrading my all-in-one HP Photosmart B209a, I can't find any more a link to the dialog box used to change things like .jpg .png output files, or the folder in which the Photosmart stores.  How to make these changes now?

  are noffkehw, you referring when you save scanned images? If Yes can you scan from the printer to the computer or through the software on the computer? If you use software on your computer, then you should be able to designate which files should be saved in format.

  If you use the printer to scan to a folder on your computer, you will need to use the printer software to activate several formats for the file to be saved as. This should be under actions to scan in your printing software - normally under the Scan of the computer.

  Let me know!

• Error ink system Oxc19a0042 after installing new ink cartridges 564 in Photosmart B209a

  After installing real 564 HP cartridges in a printer Photosmart B209a, screen reads incompatible cartridges, and the printer went to err Oxc19a0042 ink system. Have you tried to unplug it, put the old cartridges, etc. and yet cancel the error and print. It's unused cartridges HP 564. Why are they incompatible and what can I do to solve the problem?

  This document on the 0 x.rror can help:

  http://support.HP.com/us-en/document/c03081973

• old documents printed on new printing - photosmart b209a?

  Neww installed ink cartridges photosmart b209a printer and an old printed document appears on each new document to print.  Performed a realignment and a product cleaning but it appears stll on the new print jobs.

  Not quite sure what you mean here: If the printer did reprint a document already printed whenever you print a more recent document?

• change the language on photosmart B209a more

  I have an all in one printer, copier, scanner Photosmart B209a more - I had machine the language in English but by accident, it was changed to the Korean or Japanese, and now I am unable to return to English - can someone please help me get back to English again? have tried everything I think to do, but not good - would be grateful for any suggestion, leading to a solution - thanks a lot in advance to anyone.

  Hi Alexander40,

  I understand that your printing language has been changed.  I would like to try the following steps.  Let me know how it goes.

  To set your language and country/region
  1. on the home screen, press the right arrow to view more options.
  2. press Setup.
  3. touch preferences.
  4. press on the desired language.
  5. press on the down arrow to scroll through the languages. When the language you
  want to use appears, press on this language.
  6. When prompted, tap Yes to confirm your selection.
  The Preferences menu reappears.
  7. press set country/region.
  8. press on the down arrow to scroll through the countries/regions. When the country.
  region you want appears, touch this country / region.
  9. When prompted, tap Yes to confirm your selection.

  * If you find this useful or mean please make sure you click on the White Star under my name to give me congratulations. **

• Can not access to the solution Center HP for Photosmart B209a using wndows 8

  After you have installed windows 8 I could not access HP Solution Center to scan my all-in-One Photosmart B209a printer. I tried to uninstall and reinstall the software using the Installation Wizard of HP printer for windows. When reinstalling the software/driver, he encounters an error and cancels the installation of the software.

  Any suggestions on how to get this printer/scanner working again?

  Lucas

  Select the driver correct win 8 and install for this model via the link below

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=3777182&

• Photosmart all-in-one wireless B109n - problem with detection of the cartridges

  I just bought a Photosmart all-in-one wireless B109n. implementation proceeded without problems (including printing test photo).

  When I tried to use it later, he said that the cartridges were not detected.
  Strange thing is that when I take one of 4 cartridges, it says that one is missing. After you have added the last of them, he says that none of them are detected.

  Also, I need to re - enter the language and area whenever I turn it on. As if it's reset instead of make a cut...

  How this can be solved?

  Back to the store where I got it.

  They saw the same thing I had met and gave me a new without much fuzz

  The new works very well

• HP photosmart B209a print double

  My HP photosmart B209a Office jet recently started printing 2 copies of everything that print. number of copies is 1, but it still shows a second copy. Even if I go to feel that and immediately remove the print order, it will always display a second copy. The only way I could stop it is to turn off the printer when the page is printed before the following spell.

  I tried searching print preferences, but can't seem to find that.

  I work with an iMac with the latest OS.

  Thanks for your suggestions.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• HP Photosmart B209a is no longer connect wirelessly because change of modem/router

  I recently had to change a modem Motorola Surfboard, router Netgear (both at least 5 years). The new modem/router combo is a C3700 Docsis 3.0. My printer HP Photosmart Plus B209a model is no longer connects to the wireless network.  I tried the push button and pin. I get a WPS, unable to connect. When I print the network settings, my network is listed but the printer shows offline with no active conection. Firmware is EIL1FNO926AR and stands as the last revision of the printer. Wireless 802.11 under the mac address is given, and status is offline.  In addition, the printer and modem/router are about 3 feet apart on the same desktop.

  Any ideas for what to do to get my printer back online or is not compatible with the new modem/router?

  Thank you

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Can I use my Iphone 4 to print on a hp printer: hp photosmart B209a-m? Printer is wireless

  Please clarify for me if it is possible to use my IPhone 4 to print on my hp Photosmart Plus B209a-m. The printer is set up on a wireless connection, but doesn't have the impression of Air.

  Hello

  You can print using the HP ePrint home & Biz app.

  You can find the instructions for mounting and use below:

  http://support.HP.com/us-en/document/c02775166

  Kind regards

  Shlomi

• HP Photosmart B209a - lost wireless connection

  I use the printer above and it worked perfectly on a BT Home Hub 2-57GM. I recently added a Time Capsule from Apple in the network and now use it as my default around the home wifi even if it is connected by a cable to the BT Home Hub. I operate two apples two OS x 10.6.8

  I ran a report on the printer problems and the only 'FAIL', it's that the printer settings were not consistent with the settings of the wireless router. If I change my wifi on the home hub original only it still comes back with the same error message.

  Any ideas as to what I should do?

  Make sure all your devices are connected to a router, probably the time Capsule.  The BT home hub will give probably different IP addresses that the router from Apple.  The BT Home Hub will probably give 192.168.X.X.  Apple will probably give 10.0.X.X.

  If the B209a has the wrong IP, reinstall it, connect to the router from Apple.  Make sure that the wireless BT is disabled (recommended) or has a different network name.

• Photosmart b209a more: re: getting wireless work again

  I had to do a hard reset on the router wireless last night.  Now I can't get my printer to talk to my laptop via wireless mode.  The printer works fine on the usb cable.  But it is not convenient keep the printer on the usb cable running through the cord of the room. The wireless network test report is attached.  The router works well or I wouldn't be here typing this question.  I can not find via the printers screen, these are the ip address.  When I press the icon wireless on the printers screen, I get the error message. Unable to connect to anything.

  Steve

  I had finely the printer to talk to my laptop.  He had 1 point in the router that has not been activated (start Simple Config) see below of the attachment.  I add this info incase someone forgets this step after doing a hard reset of the router.

  Steve

  

  

• HP Photosmart C4780 connects not (wireless) on Mac or wireless network

  Sorry for the long post, but please someone help me!

  I bought my new printer a few days (actually 14th) and began to implement on my MacBook Pro with my Wi - Fi, which is routed through a Linksys router and mainly through my desktop computer (a PC with Windows XP). I used the CD that came with the printer to set it up on my Mac and it has set up the fine by USB, but when I try to set up the wireless, I get the following message:

  "Device not connected: to configure the network settings for the selected device, please connect via USB temporarily." The device can be disconnected from the USB once the network settings are transferred. »

  I reconnected and got the same message over and over again, so I decided to set up on my desktop computer instead. This does not work either and I got the same message on my desk I have on my laptop. Uninstalled on both computers, reinstalled and I STILL got the same message. At this point, I'm about to throw all the electronics in my bath tub and be done with them but on the contrary, I checked (and double checked - and triple checked) my router via my browser settings, fact that I know the SSID and the password and reconnected to the network through my laptop... Once again, the same message. I tried the network installation of push, the installation of the network PIN, I feel I have tried everything! Probably miss me something small, but eyes fresh is always an asset.

  Can someone help me? I printed a Test report of the network so that a Page Network Configuration and settings I received both... if need be, I can post the information from my router, in order to verify to implement, but after two days of trying to implement something that should have taken ten minutes (sometimes) I'm at my wits end.

  Network Test report:

  "Your HP printer cannot find your wireless router. Check our wireless router has power. Make sure that your network (SSID) HP printer name exactly matches your router (SSID) wireless network name. If they do not exactly match, run the installation of the wireless network to set up your HP printer. »

  How to change the network name of the printer to match?

  Summary of diagnosis:

  Wireless on: PASS

  Wireless work: PASS

  Find the network name (SSID): FAILURE

  Security: PASS

  The printer settings compatible with the wireless router settings: does not work

  No filtering: does not work

  Related: Does not work

  Signal strength: does not work

  Other networks detected matching your network name (SSID): does not work

  Detected wireless networks: 1

  Downlink Count: 0

  Channel: Does not work

  Although I was given my SSID (which does not match my home network - but how can I change this?) and my MAC address (I guess for the printer), so I didn't have the IP address of my printer has no way for me to get online to check all the settings! Is there another way to get this IP address?

  Summary of configuration:

  Communication mode: Infrastructure

  Authentication type: open

  Encryption: no

  ______________________________________________________________

  Network Setup page:

  General information:

  Network status: offline

  Type of connection: no

  URL to Web server integrated: http://0.0.0.0

  Firmware Version/Hostname/serial number were all given

  Admin password: not set

  802.11 wireless

  Hardware address (MAC): data

  Status: disconnected

  Port 9100

  Status: enabled

  mDNS

  Status: enabled

  Service name: Photosmart C4700 Series [6 last digits of my MAC address]

  SLP

  Status: enabled

  Microsoft Web Services

  WS discovery

  Status: enabled

  WS Print

  Status: enabled

  PC connected (s)

  Address IP/hostname: (nothing is here) Time since last access (mm: SS): (nothing is here)      

  Number of 802.11 networks discovered: 1

  (my correct information of wireless network is here, including the SSID, Mode (Infrastructure), BSSID, Channel, privacy (RSN), Auth (WPA - PSK), Encrypt (TKIP-AES), Signal and WPS (no))

  Help!

  Did you read this on your Verizon FIOS router? : http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Connection-problems-with-Verizon-FIOS-Actiontec-routers/td-p/892967