HP Photosmart B209a is no longer connect wirelessly because change of modem/router

Similar Questions

• HP 6980 printer - cannot connect wireless with the new modem/router

  
  

  You're right, that it was not easy... 4 first steps worked well and then fell on a problem with the hpsetup, because it was not on my computer.   Download drivers and software Web site, such as the drive no longer works (I have Vista Home Premium 64-bit).  Doctor of the printer does not work either... in any case it is configured now, but it took about 30 minutes to complete the configuration of the printer.

   

• I've upgraded to windows 7 my netbook aspire one AOD250 and can no longer connect wireless

  I've upgraded to windows 7 my netbook aspire one AOD250 and can no longer connect wireless and downloaded the driver, but still no luck - any help would be appreciated.

  Thank you.

  Jen

  I just found out missed me an update of the driver when I was in the Device Manager and once I updated (obviously no has not updated the correct driver at the start) my wifi does not work.

  Thank you very much for your help!

  Jen

• Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Two possibilities:

  (1) your airport WiFi might have a network name that is not in line with best practices, wireless

  A good wireless network name is...

  ... In short no more than 20 characters

  Simple... no special characters like an apostrophe, dollar sign, asterisk, etc.

  Compact, without spaces in the name

  For example, a wireless network network name as... red .dfedoryk Apple wireless network... .is not what you want. Something like... .dfedorykwireless. .. masse are much more likely to connect to non-Apple devices.

  Same guidelines your password

  (2) Apple gives the same name to network 2.4 GHz and 5 GHz network that produces double router band.  Some non-Apple devices are confused by the present, you may need to use the option to assign a different name for the network of 5 GHz on the router from Apple. Then, 'point' your device to the network name specific to which you want to connect.

• HP Photosmart B109n-z can not connect wireless

  Sorry for my bad English (I'm from Belgium)

  I bought a Hp Photosmart printer and I can't connect to my router!

  I tried severell times, but nothing has worked

  I did everything as in the video and when it tries to download router configuration message appears it can not find the

  the router and the SSID.

  Networksetup program is allso connect to my router (even with the right user name and pasword)

  Allso the program USERHPNDU cannot find anything (no SSID, no WEP, no printer key)

  My pc is connected to my router with an ethernet cable. The system is win xp home sp3

  Router Linksys WAG160N IP is: 192.168.1.1

  I even disabled my firewall and no go!

  Networkconfig page: any IP address

  TestPage wireless network:

  -Wireless on: pass

  -Wireless function: pass

  -SSID: failure

  -Security: pass

  -connected: unfinished

  signal strength: not completed

  On the bottom of the page networkconfig is printed that he had found the SSID of my network!

  Now, my printer is connected to a print server and works fine but I want to connect wireless!

  What is the solution?

  Thanks in advance,

  Paul

  Thanks for your suggestions; It solved my problem

  changed from WEP to WPA and it works

  Thank you very much

• Unable to connect wireless after changing Internet providers, error res://ieframe.dll

  I just got AT and T U-verse, and now I can't connect wirelessly. I tried to reset the router, but that did not work. I get error res://ieframe.dll I currently have Windows XP and IE 8. I can connect through the LAN, but not wireless. Help, please

  Hello

  You have made no changes to the computer recently?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  Method 2:

  Check the proxy server settings are turned on. To do this, try the following steps:

  a. disable the proxy on Internet Explorer (IE)
  b. Click Start, type inetcpl.cpl and press to enter.
  c. click on the Connections tab, click the LAN Settings button.
  d. uncheck "Use a proxy server for your LAN" under proxy server.
  e. click ok to apply the changes.
  f. open Internet Explorer and check if the problem persists.

  Method 3:

  Try the following steps and try to serve DNS renew IP address and check if it helps.
  a. Click Start. Type cmd in the search box and press ENTER.
  b. at the command prompt, type the following command and press ENTER:

  enough to the command prompt ipconfig and press ENTER
  ipconfig / renew in command prompt and press ENTER

  c. close the command prompt and check if that helps.

  
  Method 4:

  Run the System File Checker and check if it helps.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  
  Method 5:

  Re-install the wireless network card drivers and check if it helps.
  How to change or remove a program in Windows XP: http://support.microsoft.com/kb/307895

• Our HP Photosmart Plus b209a-m this that it is not connected after a change of modem.

  Lightning struck the power line outside our House. We had to replace the modem. Now our HP Photosmart Plus b209a-m shows that it is not connected. Connect us wirelessly. What should I do to get this operational return.

  Go to Applications > Hewlett-Packard > [your printer model] > setting up the printer and software.  Run it to re - connect your printer to your wireless network.  Need you a USB cable temporarily.  Connect it only when the software asks you.

• Can I use my Iphone 4 to print on a hp printer: hp photosmart B209a-m? Printer is wireless

  Please clarify for me if it is possible to use my IPhone 4 to print on my hp Photosmart Plus B209a-m. The printer is set up on a wireless connection, but doesn't have the impression of Air.

  Hello

  You can print using the HP ePrint home & Biz app.

  You can find the instructions for mounting and use below:

  http://support.HP.com/us-en/document/c02775166

  Kind regards

  Shlomi

• Photosmart 6380: printer will not connect wireless

  Just downloaded all the software for the new laptop Dell and tried to connect it to the wireless printer.  Said that he was ready then tried to print.  the message was that he wanted me to try again by connecting the cable which he just told me to unplug it.  What?  Does this mean that I have to download it all again?

  Please come back to me @Theresa11.

  I would say runnig the print and Scan doctor. If the driver needs to be reinstalled again the PSDR should solve this problem.

  Let me know the results.

  Thank you.

• laptop to connect wirelessly with the printer new router is installed cannot be obtained

  the printer is a hp3050A J611

  Hello

  1. What operating system work?
  2. What exactly happens when you try to connect to wireless printer? You get the error message?
  3. What is the brand and model of the router?

  Try to connect the printer directly to the computer and see if that helps.

  Try adding Assistant printer on the laptop and check if the printer can be added. Consult the mentioned below to the links for the same thing.

  Install a printer

  Install a printer on a home network

  Please come back with more information so that we can help you better.

• HP Officejet Pro 8600 more N91: Printer crashes with 0xB845D7DC when connect to UPC Ubee cable modem/router EVW3226

  Printing: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

  SN: [personal information]

  REF: CM750A

  FW: CKP5CN1516AR

  Then try to connect to the router wireless (active DHCP), the printer LCD display starts to blink and a second, it displays B845D7DC.

  After that, the printer asks to reset and it restarts with wireless off.

  I have a cable modem with router wireless of my cable TV UPC provider called UPC Ubee EVW3226.

  I tried to connect the printer to the router using the WPS button and provide the password. In both cases, I have the same behavior.

  I have a dozen other wireless home devices that connect without problem to the router. But not the printer.

  Please let me know what other information will be good for you to solve the problem. Or, please provide a workaround solution.

  I found the solution:

  connect to your printer cable (you can use a direct eth between your computer and your printer cable), access the web interface and disable support IPv6 (let the IPv4 only verified): network > General > protocols > only IPv4 verified. Save and restart the printer.

  In 80% of cases, it will work on the wireless connection. For the other 20% when it does not work, try to assign a static IP address to your printer (network > Wireless > IPv4) in a second time. Take data from your router (IP, gateway, DNS).

• No internet connection with C6300 only cable modem/router - No. Ethernet cable plugged

  About once or twice a week I wake up my desktop PC and see an icon (bottom right) which indicates that I have no internet connection. When I run the troubleshooter network (right-click on the icon) it says to plug in my ethernet cable. I replaced the cable with another know good cable, but the problem continues to return (though intermittently). If I unplug the ethernet cable from the port of my C6300 Netgear and plug it back in the same or another port, the internet connection is restored. I'm on Windows 10 edition 64 - bit OS on my desktop tower PC (Dell). My internet provider is Cox Communications through their cable with up to 100 Mbps of speed. My Netgear firmware version is V1.02.20 to help you can provide me to solve this problem would be appreciated.

  Well, it has been a few weeks of performance without error since I replaced the Netgear C6300. So I close this investigation as "FIXED."

• Unable to connect after you change a new router and created a homegroup

  I myself locked up on one of my two computers while changing to a new router and creating a home group.  I apply my finger to fingerprint logon and I get a checkmark succeed.  After that the screen changes and it asks for a password.  I have a password for this unit, Dell XPS M1530, but it failed, I tried the password to the new host group and it failed.  The only thing on the screen after that failure is a bit and that is; "XPSM1530 index password".  Below, please sse list attempts;

  Fingerprints succeeded

  Original password of my journal, has no

  Password assigned to group living unit by me, has no

  Don't have a password for collective housing by the software,

  I even tried the password of the router, doesn't have to

  Should I call to Microsoft @ $99 per event or Dell $$?  It is not unclear to me as to who I should contact.  If anyone out there not a remedy which the company should I go to?

  Harry

  Software Windows 7

  Original title: lockout

  Thanks, I used the disk and it worked, I don't know why, but he did.  I have to find a way to remove the need for a password.  The computer never leaves the House and I have insurance to cover.  I found what I believe is the removal of password, but I think it's to administer it, me!  Kinda got cold feet.

  H'

• Photosmart 5220 went offline, not connected to the pc

  Photosmart 5220 is no longer connected to the PC. Used to work perfectly, assistance contacted, can not help you.

  President made,

  Here is a link to a document that should help you resolve your problem.

  http://support.HP.com/us-en/document/c02221706

• Unable to connect wireless DNS server is not recognized.

  My laptop won't connect wireless does not have the DNS server has never had a problem before

  Hi Roger,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the issue you are unable to connect wirelessly because there do not recognize the DNS server. The problem may be caused, if there is a miss match the IP address configuration. Then, I suggest you to try the steps below and see if it helps you to solve the problem.

  Method 1

  Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save your time and efforts.

  Run the network troubleshooter utility:

  Method 2

  If the problem persists, I suggest you to release and renew the IP address. For this you can see the steps below.

  1. Go to Start, click all programs and open the Accessories.

  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.

  3. In the command prompt, type the following command and press ENTER:
     enough ipconfig and press ENTER.

  4. Then type ipconfig / renew and press ENTER.

  5. Type Exit and press ENTER.

  Method 3

  If the problem persists, try to reset the TCP/IP stack and see if it helps you to solve the problem. To reset TCP/IP, you can refer to the procedure described in the article mentioned below. If fixit does not help, try to follow the manual steps.

  How to reset TCP/IP using the NetShell utility

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards