HP photosmart C4580 Mac cannot print double side

Similar Questions

• E-all-in-one printer HP Deskject 3520: Print Double side problem

  When I printed double sides with the printer 3520, for some reason, he created margins huge on my paper as well as did the smaller font. I saw a forum about this problem, but it has not really helped. So is there a driver or something I can download to fix this problem?  I have a Windows Vista Business - 32-bit!

  I don't want to sound sceptical, but you can see again? I have the same version of Vista installed on a computer here, and the button is there on the Advanced tab. The button, but just in gray? If this is the case, you can not be saved as an administrator.

• Cannot print 2 sides on 8600

  Cannot print two sides on 8600 with duplex unit

  Thanks for the reply. The night last someone told me to unplug the power cord from the printer and wait for 15 seconds. I did a walh it now prints both sides via the duplexer. Thanks for your help

• HP photosmart c4580 program cannot find the installation 7zs7e9a file

  HP photosmart c4580 after installation at the start of problem cannot find the 7zs7e9a Setup file.

  cancellation of the attempt to install the software will run without problem.

  tried to extract files without 7zs7e9a file in the temp directory

  all solutions?

  I solved this problem. It was the error of Microsoft Installer program tried to run the corrupted original due to an MSI installation. the quickest way to fix the problem was to uninstall and reinstall the hp software.

  PS

  OS vista Home premium 64-bit

  Thank you for your quick response

  concerning

  clhxo

• DOE to Laser Epson c1100 printer does not print double side or more than one page

  Original title: windows 7 64-bit

  Hello

  Someone help please? I have an epson c1100 laser printer... .works fine with xp but now with win7. The best I can get is the driver by default that automatically loads if I understand correctly that there is no specific driver for this machine available in win 7. Prints a sheet ok, don't double side or on several pages. Has anyone found a way around that?  Otherwise, I have another pc using vista, I could link so when I print the win7 machine it transfers data on the other pc and print it! Seems a long way round but I really need my laser works as it is a great machine. Epson does not offer help, unfortunately

  Hello

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error message or error code?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest to run the printer Troubleshooter and check if the problem persists.

   

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also see the following article for more information:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2: You can search the print settings and make sure you are able to print double sided and more than a page.

  Choose printing options

  http://Windows.Microsoft.com/en-us/Windows7/choosing-print-options

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

• HP LaserJet P1102 cannot print both sides of the paper

  I updated my Windows 8 Windows 8.1 and now I can't print both sides of the paper.

  In my old Windows 8 my printer HP LaserJet P1102 printed the odd sides of the document, then a pop-up window appears and when I click on the 'next' botton and submit the documents to the printer printed the sides of the document. After that the Windows update in the context menu does not appear, so the printer simply prints the odd sides and then nothing happens (just the red flashing on the printer).

  I tried to update the driver (downloaded from your site), but nothing has changed.

  I hope that you can add some useful tips and I can solve this huge problem.

  Thank you!

  Hello

  I understand that you can print is more on both sides.

  When the light flashes try and open and close the lid to see if continues to print.

  (there is no button for the printer but which will resume print jobs)

  I would do a complete uninstall and reinstall the printer software to see if that makes a difference.
  You can download the drivers from this url.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=4110396&

  Win8 and Win8.1 drivers are the same Version9.0.

  If you need more simply make assistance let me know.

  Please let me know if the printer is connected by usb or the installer on a wireless network.

• Photosmart HP 6510 cannot print in Parallels for Mac using Windows 7

  Currently, I use the model above the printer with my Macbook (OS x Mountain Lion) and have no problem printing with the Mac.

  The problem is when I'm in (Parallels Desktop 8) mode of the virtual machine and I am trying to print from Windows 7.

  Although it seems to be recognizing the printer it tells me the printer is "offline: 1 document waiting."

  Parallels support pages say that printers should operate automatically.

  Can anyone help?

  Looks a bit like a mixed configuration here, where you are using a Macintosh with Windows loaded on the system. My first question is on the profile that you are working with you have loaded the appropriate drivers on the site for the Windows machine? Here's a link to it:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=5058336

  I would also like to run this diagnostic test too:

  http://support.HP.com/us-en/document/c03286146

  Let me know and I'll do what I can to help!

  Have a great day!

• HP Photosmart C4580 does not print with Mac Book 10.5.8

  I tried all the "solutions" made the HP Support.   When I click on the HP Photosmart C 4500 series icon, it says printer is connected but 'lazy '.  Honestly, I disconnected and reconnected everything.  I added no and added the printer.

  I tried all your advice and directions to troubleshooting in the manual.

  Finally, I tried pressing the x button and the ok button on the control panel.   He printed things on my queue.

  Can't imagine why it worked, but it did.  Yay!

  I want to thank you for taking the time to help me.   Katie

• HP photosmart 7510 don.t print double-sided automatically auto option not available

  I check the devices, and although my printer has the possibility of two side attached, it says no option 2 faces.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  E-all-in-one printer - C311a - drivers HP Photosmart 7510<- set="" to="">
  version of Windows.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5070121&LC=en&cc=us&DLC=en&lang=en&cc=us

  Photosmart HP printer 7510 e-all-in-one - C311a - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=5070121&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Someone from HP can tell us when you will correct the C4580/Mac wireless printing problem?

  Like so many other posts on this forum "to support", my C4580 goes into sleep mode and wake up. I have already sent my printer original back, received a replacement and it has the same problem. Brutal...

  Just got the phone with the help of HP, and he said that HP is working on a fix. HP support by phone was always quite useful, but maybe they need to hire some new engineers.

  I see messages from November on this bug, and they do not always have a difficulty?

  This has been an absolute time thief. Next purchase of printer for me: Cannon.

  The Hewlett-Packard Company released an updated firmware for the problem which occurs on the Photosmart series C4500 and Photosmart C4400 series. Updates are currently available for use on the Windows operating system.

  The following links can be used to find the software for the two affected products.

  Update critical to prevent and does not state for Photosmart series C4400

  Update critical to prevent and does not state for Photosmart series C4500

• HP officejet all-in-one 4632: Hp 4632 cut the top &amp; bottom of page on print double side

  My hp 4632 is cutting off the top & bottom of my pages when I try to print with double-sided printing. Y at - it a fix for this problem?

  Hello!
  Welcome to the HP community @hoylep,

  I saw your post on your Officejet 4632 cutting the ups and the downs off printed pages and wanted to answer to help you. My suggestions are below.

  1 reset the printer and make sure the printer is plugged directly into a wall outlet, avoiding bars power and surge protectors.

  2 start the print and Scan Doctor for Windows in order to solve printer problems

  3. try the steps in this guide: fixing poor print quality

  4. Uninstall and reinstall the printer. You can use the printer Installation Wizard to install the printer.

  5 print from other programs.

  If the problem is not resolved at the time where all the above steps are performed, contact HP to discuss alternatives to the printer.

  If you have trouble, let me know and I'll do my best to help.

  Click on the thumb to below testify my help!
  Click on the 'accept as Solution' If I guided you towards a solution!

  Best wishes

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• Mac cannot print wireless HP Officejet Pro 8600 Premium

  I have a wireless network of office with some Mac and some PC and an HP Officejet Pro 8600 Premium.   During the initial Setup, the first Mac was able to print fine, but today, he was not able to print.

  Two PC can print wireless with no problems.  Macs are struggling, but it's different for each:

  Mac #1-OSX 10.8.5) printer installed via the installation CD.  He worked for a week, then stopped working today.    I sent a print job, and he was sitting in the buffer always 0%.  He never gave an error, but it has never printed.  Then I uninstalled the printer and added via system preferences and got the message "Unable to communicate with the printer right now" while the installation failed.   However, I am able to navigate to the IP address of the printer from a browser and see all the parameters.  I am also able to scan FROM the printer to this computer, then it is certainly communication he...

  2 mac - OSX 10.7.5) installed system Prefreences without problem printer.  Sent a print error-free job, but he blocked indefinitely in the buffer to 100% and never printed.   This Mac was able to print via USB.

  We are on the same wireless network.  The printer is configured with a fixed IP address.  Any ideas?

  Hello whatkatiedoes,

  I understand your frustration I want to gather some information so that we can begin troubleshooting.

  Did you update firmware for your OfficeJet 8600 Premium? If this isn't the case, I wish that install you this, it was released 23/7/2013 click here to update the firmware.

  Also we will go forward and restore the default network on your printer, go to the front panel of your printer and follow the steps below:

  Menu Configuration > Tools > restore default settings

  Now that we have a 8600 OfficeJet updated premium and have restored the default values. I want to you now to connect wireless using the Wireless, Setup Assistant which is also found in the front panel of your printer. Steps listed below:

  Menu Setup > network > Wireless Setup Wizard

  Once these steps have been performed, you can now try to re run the installation software. Here's the direct link for HP Officejet Pro Full Feature software and driver - Mac OS X 10.8. Please let me know the result and if it was successful, I hope to hear from you soon.

  Thank you

• HP Photosmart C4580 does not print .pdf files

  With the help of a MacBook Pro, I can print anything using Pages, Numbers, Safari.  But when you try to print a .pdf file I can't print anything.  Instead, I get an error message: "opening printer connection failed: cannot open the connection to the printer."  Please check your printer connections and search for printing errors. »

  But I don't have any errors.  And, once again, I can print all kinds of other things, just not this or other .pdf files.

  Ideas?

  Well, by trial and error, I found a way to do it.  Press PRINT, then hit ADVANCED and then check the box that says PRINT AS IMAGE.  Then, it worked for me.  It seems strange that printing is impossible without convoluted to do.

• Photosmart c309g-m: cannot print from computer

  I signed up for e connect without realizing my photosmart c309g-m had to be able to access the internet, which he did not. Now my computer re-will not install my c309g-m. I now have no way to print from my desktop. I need help to re - install my c309g-m.

  Hello @botrock2227,

  Welcome to the Forums of HP Support!

  I would like to help you today with the relocation of your HP Photosmart Premium of C309g all-in-One printer on your Windows Vista-based computer. Can I please you follow the steps below.

  Please disconnect the USB cable from your printer or computer, is easier.

  Step 1: Uninstall the drivers:

  It is crucial for the repairs we have a clean slate to work with. So, I'm going you have to make sure all traces of your printer is uninstalled from your computer before install us a new copy of your Photosmart.

  1. Click on the Start menu
  2. Select all programs
  3. Select the HP folder
  4. Select your Camera HP Photosmart
  5. Select Uninstall

  Please follow the instructions on the screen to complete the uninstallation. Once your HP Photosmart camera has been uninstalled, proceed to the next step.

  Step 2: Remove temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Reinstall the device:

  1. Please click here to download the package full feature software and driver for your printer
  2. Once the site opens click on the download button
  3. Once the download is complete, you can get a command prompt to run the installation program. If you see this, select run
  4. An extraction will occur automatically and your installation will launch
  5. Please follow the steps on the screen to reinstall your printer
  6. If you use a USB cable connection, do not connect the USB cable until the installation program invites you to

  Once installation is complete, please try to print to see if the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Photosmart B1110: Mac - B1110 printer driver

  After a few years of use, my printer escapes is not found. I use it a lot for printing and scanning.

  I've been on Yosemite. I've upgraded to El Capitan.

  This OS is apparently is no longer supported for this printer. Which kind of sucks, because I bought the printer on the Apple store. And the first recommendation is to upgrade to the latest version of the Apple software.

  No work around? Please...?

  Note:

  -I can't see the printer in system preferences / add a printer.

  -When I print pages print config, it tells me that it is connected to the network. I'm on the same network from my laptop, albeit via the wireless.

  -I can no longer access the printer via the IP (192.168.0.5)

  MacBook Pro (13 inch, early 2011)

  2.7 GHz Intel Core I7 processor

  Reboot the router. It took me forever to it. Nowhere on the Mac boards or boards of the printer.

  Well, came the end.