HP Photosmart C4680 paper tray Extender

Similar Questions

• PHOTOSMART C4680: paper clear jam c4680

  ABOVE C4680 PRINTER HAS A PAPER JAM THAT I CAN'T ERASE. SPECIFICALLY PRINTING A LABEL AVVERT SHEET 4 IN. WIDE THAT STUCK & BROKEN DURING THE COURSE OF THE POWER INPUT. NEED TO MAKE JAM THAT I CAN'T SEE OR FEEL.

  THANKS JOHN

  Hey @venny1,

  Welcome to the forums!

  I understand that you have a paper jam on your Photosmart c4680. I can help with that.

  This document describes How to troubleshoot a paper jam in the printer. Please let me know if it helps. If it then please let others know by clicking on accept as Solution below my post. If you have any other questions please let me know.

  I hope this helps and I hope you have a nice day!

• HP envy 4520: extension of the HP Envy 4520 jammed paper tray

  Extension of the tray jammed paper closed on envy hp 4520, can not print, help!

  Hi @chics,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you use a printer all-in-One HP ENVY 4520 with a 10 Windows PC and the printer paper tray Extender is stuck in the closed position. I would like to help with that.

  First perform a reset of the power on the printer.

  

  Then try to make a copy using the control panel of the printer to see if the tray Extender will extend.

  Please let me know if that solves the problem, or if you need assistance.

• Photosmart HP 7520 - surface tablet paper tray selection

  Photosmart HP 7520 - paper tray selection

  I can't print photos because your surface said the photo tray is not installed, it pulls the paper in the main print tray!
  

  Great I got it... Installed the phototray... Thank you

• photosmart HP 6520 paper tray and touchcreen questions

  I just bought the photosmart 6520 but the hood for the paper tray seems not laid flat on the top it leaves a small space between the tray and cover with the lid.  looking around online all the photos I find paper without the space show sitting flat on the tray.  anyone else have problems with this?

  Another problem arose, I turned off the power and the display will that cross all lines and a blue bar at the bottom.  after it does all that I can do is to unplug to reset but then does all over again?

  can I return or Exchange it at best buy were I bought the 30/06/2014

  towards the end he went back to BEST BUY, which sovled all the questions I had.

• Using a Photosmart C310a cannot print photos from the photo paper tray. With the help of Mac Lion

  When you print photos using a C310a Photosmart on a Mac with Lion. I cannot print on paper photo from the photo tray. It keeps or by default in the paper tray.

  Any suggestions

  Hello...

  Please try these steps... it might solve your problem...

  1. go to mac apple icon-go to the software update - pls download and install the update.

  2 restart the pc - and then go to the new apple icon - go to System Preferences and continue to print and scan

  3 Higlight your printer, then click on the button "-" to remove the printer-if your connected USB printer please unplug USB cable - then restart your pc

  4. after the restart, return to icon - system preferences - apple print and scan-for usb connection: plug the USB - if your printer does not automatically appeared on list of the printer olease, click plus the sign and Higlight your printer then click Add button - after that - to prove the fucnctionality

  for a wireless connection - simply click on the sign more, then, HELLO - Higlight your click and select printer Add button - then prove the functionality if you can print and scan.

  Hope it will work for you...

  Please click on that button KUDOS if I solved your problem... Thank you! more power! =)

• HP photosmart 8250: 8250 printer paper tray doesn't slide.

  8250 printer paper tray doesn't slide, seems blocked but nothing seen looking into the slot, how can I get the tray to go?

  I was able to get and apparently there's a shift to the right if the tray is not directly aligned it will only partially.

• HP Photosmart C4680: my Photosmart C4680 is printing only the white pages

  Hello

  Whenever I try to print something it prints just a blank page.

  The paper through the flow and I heard sounds of printing.

  I tried to clean the ink cartridges, it did not help.

  Please can someone help me with this.

  Thank you in advance,

  Jamie

  I hope that you are well @jamiebally, welcome to the community of HP
  
  I noticed your post on your Photosmart C4680 print white pages and I wanted to stop to share my suggestions to help out you.
  
  Check out this link to fix the problem. If the problem persists, contact HP to see on your replacement options.
  
  The problems of quality of printing to the HP Photosmart C4600-C4700 all-in-one printer series
  
  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!
  
  Have a wonderful day!
  
  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• HP photosmart C4680: HP Photosmart C4680 printer

  Photosmart C4680 printer will print correctly. Problem follows:

  1. Press on print
  2. Printer makes a noise of switch for several seconds
  3. Athens printers normally feeding paper & prints correctly.

  Noise distribution is done before printing each page. Feeds correctly.

  Need help before ruining printer.

  Thanks John M.

  What a pleasure to receive a response. Unfortunately, took all the steps without success. You took note of cliqueti noise that continues after all the inspection. I observe that the rattling noise occurs when the transport is on the right side of the printer. When you move the carriage to the left & with a flashlight, I saw a black glob in the extreme right under where the transport would be. What key it seemed to be a deposit of black as ink. Do not think that this isn't the ink as empty cartridge or showing empty.

  The printer has served faithfully for time Believe + 5 years came for the replacement. However, t would be nice to know how this has happened.

  I thank for the help & you can be sure that the replacement will be a model of HP.

  Thank you venny1.

• Photosmart 7525: photosmart 7525 photo tray - how to get the photo tray to use instead of the main tray

  I use a computer from Dell using Windows 8.1 desktop 64-bit.  Printer is HP Photosmart all-in-one 7525.  The software is Microsoft Picture Manager.   I want to print a photo .jpg of MS Picture Manager for paper photo 4 x 6 I have loaded in the photo printer paper tray.  The problem is that printing is still trying to main paper tray in the printer.  Remove all paper from the main tray just causes the print operation to not to say that the main paper tray is in the paper.    If the main tray contains plain paper, the photo printed on this paper.  I have the printer set up to use the photo tray.  I select HP 4 x 6 paper in MS Picture Manager and also set Picture Manager to the highest print quality.  But no mater what I tried, the printer selects tray to main paper rather than the smaller photo paper tray.  The printed image is 4 x 6, but it is printing on paper of the main plate.  What I am doing wrong?

  Well - I found that among the pop ups related print had a link 'options' that seems to indicate that it could be me trying to change things which were not suitable for my printer - so I didn't click the link.  So this time I didn't click the link and he showed me up - again - to set the s/w to use the photo tray.  So I did and the photo made print from the photo rather than the main tray tray.  So now I know how to do and don't need to mess with trinkets or all other signs, you've shown me.  Thank you for taking the time to try to help me.  I appreciate your help.  CR

• Material paper tray

  The cover of the paper tray is not attaached.  How can I reach it.  Photosmart 6520

  Hello

  This can help:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=5169038&spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03312029-6%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• How are you legal papert in the paper tray?

  The Pro 8600 came with 2 paper trays.  I don't know how to set the paper of legal size paper tray.

  Hello

  Please see the cyan/blue part, there is a diagram that shows you how to extend the status bar.

  Kind regards.

• Color LaserJet Pro M277dw MFP: MFP M277dw paper tray

  The paper tray does not completely fit in the printer.  It's coming out about 2 ".  I don't see anything block.  Printer jobs – pick up paper from the bin, etc, but it will not duplex printing, and if I photocopy something, there is a white margin on the copy.

  Help!

  May (inadvertently) pressing the blue "the tray Extender" latch, which aims to extend the status bar in the order so that it can adapt to (longer) the legal paper size.

• HP Deskjet F4488: How to close the tray Extender?

  Sir / Madam,.

  I opened the tray of my HP Deskjet F4488 printer extension. However, I'm unable to slip into his former position.

  Please let me know what the procedure is.

  Thank you.

  Sunlac

  No problem. Can swing you the Extender at all, which means can pull you from the open Directorate then try to close it? Maybe it's just very steep.

  I found another suggestion posted on the forum that might work too. @mattmwise Posted the following text:

  The extension of the tray seems to catch something inside the paper tray.

  I guess I'm happy for anyone who gets their equipment replaced under warranty, but this seems a pretty silly way to settle a minor mechanical problem with a functional device otherwise.

  Here's what I did to solve the problem with my C4780 off-warranty:

  Find a light and rigid tool which is longer than the distance between the left edge of the extension of the tray and the left edge of the paper tray. (I used a knife to... not very safe bread.)

  The tool must be long enough to reach the edge of the inside of the tray Extender to paper.

  Insert the tool into the ditch in the paper tray (where the Extender goes when it is closed) as close to the body of the printer as possible.

  Press gently on the edge of the Extender that is in the paper tray.

  The Extender should give a little. Now it is loose. Remove the tool and close the Extender.

  I would like to know if it works for you.

• HP ENVY 114 e-all-in-one printer output tray Extender does ' t open or close when printing

  The tray Extender out on my HP ENVY 114 e-all-in-one printer is not open or close when I print. Currently it remains open all the time so it's not the amount. It started when I had a paper jamb because transport has not opened.

  New impressive @Barkingloon 

  If you have a moment, please click the button of "acceptable Solution" on my last message (Message 2), for others in the community can find thread too in case they run into the same problem.

  Have a wonderful Monday